Scale of grey with CS5 and windows issues

Similar Questions

• I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

  Original title: DVD problems

  I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3 are. what patch you referring?
  4. this happens to you with some specific discs?

  Reinstall the drivers for DVD player and check.

  1. click on start > run
  2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  4. When you are prompted to confirm that you want to remove the device, click OK.
  5 restart the computer.
  6. when the computer restarts, the drivers will be installed automatically.

• Try to install EQ7 on iMac with Parallels and Windows 7

  Have iMac with Parallels and Windows 7. Try to install EQ7 (windows only program). Get the message "Error reading setup initialization file." How can I install this program?

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

• Use Adobe Creative cloud with Mac and Windows

  Hello

  When I register for the Adobe Creative complete cloud - I can use it with Mac and Windows computers, or is it limited to a single system?

  Kind regards

  Johanna

  Hi Johanna,.

  Creative cloud is platform independent. You can use it on windows and mac.

  You can activate the subscription on two machines but use only on one machine at a time.

  Reference: http://www.adobe.com/legal/licenses-terms.html

  I hope this helps.

  Concerning

  Megha Rawat

• Urgent! InDesign CC, problems of placement of the image with Mac and Windows

  Hello

  When I tried to place an image or move pages in another file, indesign gives the following error.

  "The file does not exist, you may not, or the file is perhaps currently in use"

  I tried renaming the file, copy the file or re-edit the images... Nothing has worked... I am convinced that this is a problem with the mac and windows integration...

  How can I transfer files without problem from the Mac to the PC or vice versa.

  already solved...
  Mac OS permission issues.
  Adobe customer service solved the problem

  For more explanations and for your understanding...

  1. I create a template for my colleagues to work under Windows. Give them the files with a flash drive.

  2 employees were working on Mac...
  3. I took the model in a flash drive and tried to place some pictures...

  4 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."
  5. I tried to recreate a link to images in document thinking "Okay maybe." it's a problem of link

  6 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  7. I have tried to move the pages in the document to another, think "might be that I can work around this problem.
  8 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  9. I tried to place another image to another folder

  10 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  11. I tried to rename the file and after that the evolution of the file

  12 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  I guess that this time there is no confussion in your mind...

  to cut the story short, it's a problem generated by authorization on Mac problems. It is resolved by defining the whole Adobe preferences folder and its contents to be read/write, not just read-only.
  In Mac OS: [Drive] /Users/ [username] / Library/Preferences/Adobe
  In Windows [drive] \Users\ [username] \AppData\Roaming\Adobe

  also after you change these files for read/write, you must copy the files you worked on once again.

  Thanks for your attention...

• Playback jerky with CS5 and Canon 5Dmk2 files

  Hi all!

  I have a problem and I am really frustrated with it. It seems that cannot get even a track with 5 d mk2 replaying files without serious problems... My machine is

  Athlon X 2 7750 Black Edition 2.7 GHz AM2 + CPU

  8 GB RAM (Patriot)

  2 x 250 GB RAID0 (mother RAID card, guess it's a software?)  250 GB for scratch + 500 GB for original material

  NVIDIA 480GTX (Zotec) with hack for CS5, the latest drivers from Nvidia

  equipped with a Nvidia 8300 graphics card

  First CS5

  Windows 7, 64 bit.

  Maybe not relevant, but I have three monitors connected to these maps - 2560 x 1600 HP and Sony TV 1920 x 1080 to 480GTX and a Samsung 1920 x 1080 with Nvidia 8300... I heard that there could be problems with the installation of multiple monitors?

  Not a single file of 5 d mk2 cannot be read without stuttering, although even if I put 10 layers of these files, the Ribbon is always yellow but then everything freezes if I try to play it (the sound turns on but the video stops)... What should do? I7 is the solution?

  The images you are trying to change are quite demanding on any PC, but your CPU is medium to low power to cope. Illustrative, that your system is about 80 times slower than a good performance system. Minimum requirements for comfortable editing of this material is an i7.

  What you try, it's like pulling a truck of 10 tons with a bike.

  Your system is seriously out of balance, a big ugly CPU video card and disk configuration that is below par.

• I want to buy Toshiba laptop with Ubuntu and windows

  I want to buy a new laptop.
  I don't want to pay 300 quid for yet another stupid Windows (if they are just a version properly, people don't need to keep buying new... oh wait... they make more money...).

  Others don't offer laptops with Ubuntu (and not windows).

  I find myself here, and Toshiba appear also does not provide laptops without windows.
  Why? Why Toshiba offer laptops with pre-installed Ubuntu with no windows?

  I use Ubuntu for 3 years, and altogether, he transformed my daily calculation. No more bloody virus, not 5 minutes log-ins/closures, no more program - crashing down the entire system. It is faster, safer, more flexible and * free *.

  But because Toshiba do not appear to offer it, they can't get my habit (I'm in Ireland, so Toshiba options open to me may be different in other countries).

  Hello

  First of all it s a forum from user to user and you get no response from Toshiba here in the forum.

  But as much as I know that Toshiba laptops are not delivered with the distributions Linux.
  Of course, you can install Linux if you want, but laptops are delivered with the Windows operating system. As far as I know with win 7 64 bit and 32 bit OS.

  Welcome them

• Problem with AVG and Windows

  A.V.G. IN INTERFACE WITH M.S.

  * original title - A.Programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  If your computer is actually turn off and isn't just pass in "Sleep" or "Hibernation" during a scan, and this happens only when you run an analysis, then I must say that yes there is a problem with this security on this computer suite.

  Personally, I'm worried about the security suites.  They developed gradually bigger and bigger, which requires more system resources, and when they fit well with a particular operating system, they can interfere with its normal functions.  My preference is to use a good antivirus and Windows Firewall.

• Connection to the network with Vista and Windows 7 computers

  A similar question was answered before, but it's XP computers I use Vista and Windows 7.

  I have a Windows 7 computer that is part of a home network and who also has a connected printer. I want to access the printer from a Vista computer that is also on the network. When I try to connect to the Windows 7 computer, I get the error "logon failure: the user has not granted the type of logon required on this computer."

  I've seen solutions have been when the system tries to access the printer was an XP system. Can someone help me with this problem?

  Thank you

  Jim

  Hi Jim,.

  ·         Is file sharing enabled?

  ·         You have disabled password protection?

  Try to check the Advanced sharing settings in the network and sharing Center. To do this, follow these steps.

  a. click Start, Control Panel and then click network and sharing Center.

  b. now, click change advanced settings for sharing.

  c. now make sure that file and printer sharing is activated on and protected by password sharing is turned off.

  You can also see the article for more information:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know the results.

• Problems with iTunes and Windows 7

  When I try to access a song from the library in iTunes, I get the following message "the song 'xxx' could not be used because the original file cannot be found. You want to locate? "Any suggestions how to solve this problem?

  It also is an exclamation in the far left column in the iTunes library.

  This can happen if you have NOT the "copy files in my itunes media folder when adding to my library itunes." selected, and you have a network drive mounted where you have added files. If you launch iTunes and the same drive is not mounted, iTunes think that files are missing.

  The same is true for any situation where the path to your media files: either mount you a network drive in the 'shared media folder"and change the share name"Press Kit "... This happens with local directories as well if you leave not iTunes manage your media files (which you should NEVER do) and you do not copy the files of your iTunes media folder. Changing the location of your media or any what part of the path to these files gives you this error.

  This can also happen if you have completed the transfer of songs to your iTunes media folder - even if iTunes displays the files in your media list. I added about 200 discs in my iTunes library (which I had managed for years with full ID3v2 v1 EPAS, and Custom embedded in each file tagging support). When my computer restarted because Microsoft updates installed automatically (although I had that option enabled OFF...), I lost access to all files that they appear in my library. Try to add the duplicate error message gives me.

  iTunes is the worst.

  My only solution is to delete all files with the. and restart Windows. Start itunes and then log out of your account. Reconnect to your iTunes account and add the files of 'missing' again. If you do not use iTunes, you may use a more robust solution like helium... by far my favorite.

  Good luck with your multimedia library. Best wishes

  Jase

• Problem with Skype and Windows 8

  Received a new computer with Windows 8.  Skype came on the computer and worked great for a day.  Now it shows people I'm "unavailable" even if I'm registered.  When I make a call, it sounds just and rings and the person I call does not get notification.  Should I uninstall the Skype that came on the computer and download another version?  Any suggestions?  Please make simple answer - I'm NOT techie and I need Skype to work for my company!

  You use the Skype app?  If so try to install Skype to office and use it from the desktop.  The apps are a little more prone to disorder compared to the fuller program.

  How the desktop version of Skype on Windows 8?

  https://support.Skype.com/en/FAQ/FA12162/how-do-i-get-the-desktop-version-of-Skype-on-Windows-8

  You can also restore the system to use to return to happier times.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  See if the program can diagnose any problems with applications and correct.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Another third-party program may be causing a problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Comparison of installation of HCM and Solution Campus 9.0 with Linux and Windows

  People,

  Hello. I install PeopleTools 8,53 HCM with Campus Solution 9.0 review 5.
  PeopleSoft Internet Architecture is WebLogic11g/Tuxedo11g/OracleDatabase11g with OS Oracle Linux 5.10.

  In the process of seting up to its instance named "HRCS90" using opt/PT8.53/setup/PsMpDbInstall/setup.sh database, there is a step like below:

  Database create Type:

  (1) demo
  (2) system of
  (3) system of PeopleTools

  Select Demo or system, the next step "select PeopleSoft Applications" has only a single element:

  (1) PeopleSoft HRCS Demo Database - US English.

  
  When set up "HRCS90" with SQL Server 2005 and Windows Server 2003, there is another element: PeopleSoft HRCS Database - English American.

  I need not demo database. I need HRCS database only because the demo database is much more disk space.

  The document "PeopleSoft Human Capital Management and Campus Solutions 9.0 revision 5 Installation Guide" does not specify the detailed process to implement an instance of database HRCS.
  I can't find other documents from PeopleSoft to set up an instance of database HRCS.

  
  My questions are:

  First of all, how much more space "HRCS Demo database" occupies only the "HRCS database"? Are there "Database HRCS' for Linux and Oracle database?
  Second, you will find the PeopleSoft document about the process of seting HRCS 9.0 database on Linux and Oracle database instance?

  
  Thank you.

  It could be how you have installed the software itself (options checked). Take a look at this thread, it may help.

  Nicolas.

• problem with RBR and Windows 7 on of T400

  Had good performance with RBR on T61P and Windows XP, still in service. Now also under Windows 7 on transfer of T400 and RnR 4.23 backups but having problem between machines. In particular:

  Back up machine 'A' on the external HARD drive. The backup appears when the HARD drive is seen by 'A '. Can also backup 'B' machine on the same HARD drive. This second backup appears when the HARD drive is seen by the machine 'B '. BUT the backup 'B' cannot be seen by the machine 'A' and vice versa. This prevents me from 'A' to 'B' cloning I could do before.

  RnR keep track of the original internal HARD disc, where the data came from? Or he keep track of the S/N of the machine he came? Or something else to avoid restoring to another machine.

  Thank you.

  To view all backups:

  (1) stand-alone boot RNR.  CD or pf11 if they are available.

  (2) in the main screen, select launch Advanced Rescue and Recovery (bottom left of the screen)

  (3) select restore your system

  (4) screen step1. restore all of the hard disk option.

  (5) following screen. Step 2. Choose the backup to restore from.

  On this screen is a box, you can check "list all the backups that have been created for other systems.

  ==

  FOR INFO.

  The specific ID content in the folder \RRbackups to distinguish between the two systems is the UUID of the machine, universal Uniquie identifier.  The UUID of the machine is contained in the BIOS and can be displayed here.

  Machine has records of a\...backup machine d:\rrbackups\sz\*uuid

  B: machine d:\rrbackups\sz\*uuid machine b\... backup files

• Sound distortion with sounds and Windows streaming media

  First of all, I'm not very technical minded, so please excuse my attempts to describe it!

  A few weeks ago, the sound on my laptop became distorted - metal kind of high, very "rough" and nasty high-pitched squeal kind of like your comments. Happens on all Windows sounds, on the media (like YouTube) streaming, but WMP works fine so I know it isn't a problem of speaker, need software.

  Just before this happened, I tried to download and install Skype, but couldn't get my microphone to work. I then uninstalled Skype. I also installed Spyware Doctor from PCTools, but there were some conflicts when he tried to run scheduled scans, three times, I started my computer to find the message "your system has recovered from a serious error" (I also have Norton Antivirus and Windows Defender running). So I uninstalled Spyware Doctor.

  I tried to find info online on this and have since downloaded and run CCleaner. I also downloaded and re-installed the Realtek driver for my sound card, but I still have this problem. All tips are welcome!

  Very beautiful ;) Thanks for this useful info.
  It might be interesting for all other users here in the forum

  Greetings

• The creative cloud is compatible with mac and windows from the same download?

  Because at the time there was a different version for each apple mac or windows systems. And I can't seem to find this information on the Web site.

  Creative cloud installation is different for mac and windows machine. You can Download Adobe Creative Cloud apps | CC free trial Adobe from there.