Comparison of installation of HCM and Solution Campus 9.0 with Linux and Windows

Similar Questions

• You can remove the flash drive after the installation is complete and Windows is completely implemented?

  Have finished installing 10 Windows on my Mac, I'm too afraid to leave the flash drive, I used in the process. Is it OK to take it out now? Or the downoads will be lost?

  Yes. Do not forget that you eject it before you disconnect it.

• Can Adobe Lightroom 4 for Mac and Windows, I install the same license on two systems or only 1?

  I just bought 1 full license of Adobe Lightroom 4 and I can see that there is an installer for Mac and Windows.

  This means I can install on both systems or my license is valid for 1?

  Thank you

  BR,

  Lucia

  Yes, LR is cross-platform and you can install it on both systems.

  Mylenium

• Can HRMS and Campus Solution 9.0 install with PeopleTools 8.49?

  People,
  
  Hello. I installed FSCM 9.0 with PeopleTools 8.49 and applications work properly.
  
  I want to install 'HRMS and Solution Campus 9.0' in the operating system Windows Server 2003 where the FSCM 9.0 are installed and PeopleTools 8.49.
  
  I checked the installation guide for 'HRMS and Solution Campus 9.0'. But some Guide says that it can be installed with PeopleTools 8.48.05 or higher. A few other indications said 'in order to launch HRMS 9.0, you must use PeopleTools 8.50.03 or later version.
  
  Can people you tell me the correct version of PeopleTools to install 'HRMS and Campus 9.0 Solution'?
  
  Thank you.

  Can people you tell me the correct version of PeopleTools to install 'HRMS and Campus 9.0 Solution'?

  Initially, the HRMS9.0 was built on PT8.48. but it was recuted. Right now, Peopletools 8.50.03 are required, as explained in the doc pulled http://edelivery.oracle.com readme.
  Take a look at this:
  Re: Error after Sucesfull identify you in PIA

  Nicolas.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Best solution for installation of Photoshop and Illustrator? Issue of the BONE.

  Best solution for installation of Photoshop and Illustrator?

  I works with InDesign CC 2014, but cannot download the PS or I ("you run an operating system the program can't"). My current system is: OSX 10.8.5.

  Any thoughts?

  Congratulations in advance.

  Requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

• My solution for No Audio - drivers Conexant and Windows 7 x 64

  My son and I have the laptop L2000 comes with 32 bit XP and used the audio Conexant chipset. I had been using a SB Audigy PCMCIA card so I don't know when the Audio is really off. However, he noticed when I upgraded his PC. I went through different forums looking for 64-bit Windows 7 for Conexant audio drivers but nothing helped. Microsoft and Conexant both said that HP should provide the drivers. By the way HP, the Conexant site says that they provide no drivers, although they make the chipsets 'at the request of the OEM." Another post said that HP will not have to provide these drivers for Windows 7. The HP solution for my model and Windows 7 has been the "HP Software Advisor" who was 67 MB and totally unnecessary. It seems that it is a very common problem. In any case, here's what you do:

  First of all, you need 2 files that come quite ironically HP, they are SP35558.exe and SP35558.cva they contain drivers for Vista x 64 Conexant. (Later, I found the 32-bit drivers and the procedure should be very similar, except that the files are SP34789.exe and SP34789.cva). Type the following command in your browser address bar ftp://ftp.hp.com/pub/softpaq/ to half way down you will find the subdirectory with these files. Just right click on them and save it on your desktop.

  Double-click on SP35558.cva and tell Windows to use Notepad to open it. Scroll to halfway down to "[Operating Systems]" and after 'WV64UL = OEM' insert:
  W764HB = OEM
  W764HP = OEM
  W764PR = OEM
  W764UL = OEM

  (For systems 32-bit using W732HB = OEM, etc.).

  I then went up to about 10 lines "[system information]" and added

  SysId3 = 0 x 3091
  SysName3 = HP Pavilion ze2000 series
  SysId4 = 0 x 3096
  SysName4 = Compaq presario M2000 series
  SysId5 = 0 x 3097
  SysName5 = series Compaq Presario M2000
  SysId6 = 0 x 3097
  SysName6 = series HP Special Edition L2000
  SysId7 = 0 x 3093
  SysName7 = series Compaq Presario M2000
  SysId8 = 0 x 3093
  SysName8 = series HP Special Edition L2000

  I got this information from another cva file on my PC to C; / / swsetup, this is the directory where HP updates by default.

  After modding the cva file, I taped C; / swsetup/sp35558 /.

  Then, I run the SP35558.exe file. He failed the first time, I missed a line in my cva file. However, I then manually installed the Conexant drivers as follows and voila I had sound, beautiful crisp clear sound.

  "" In the Device Manager, right click "Multimedia Audio Device" under the heading 'Other' and choose 'update driver' then ' Browse your PC "and"choose from a list. Select "Audio, audio and game controllers", and then Conexant 'drive '. Navigate to C:/swsetup/sp35558/and open "cp6308Ba.inf" (don't forget 64-bit). Now click 'OK' and ignore all the warnings on the incompatibility, WHQL, etc.. Give her lots of time, you might think, you are in a loop, but you're not. Congratulations, you've completed.

  I thought that to recompile my answer and then mark this thread as resolved since it was not a post about a problem, but rather how I solved a very common problem that can be beneficial to others.

  My son and I have the laptop L2000 comes with 32 bit XP and used the audio Conexant chipset. I had been using a SB Audigy PCMCIA card so I don't know when the Audio is really off. However, he noticed when I upgraded his PC. I went through different forums looking for 64-bit Windows 7 for Conexant audio drivers but nothing helped. Microsoft and Conexant both said that HP should provide the drivers. By the way HP, the Conexant site says that they provide no drivers, although they make the chipsets 'at the request of the OEM." Another post said that HP will not have to provide these drivers for Windows 7. The HP solution for my model and Windows 7 has been the "HP Software Advisor" who was 67 MB and totally unnecessary. It seems that it is a very common problem. In any case, here's what you do:

  First of all, you need 2 files that come quite ironically HP, they are SP35558.exe and SP35558.cva they contain drivers for Vista x 64 Conexant. (Later, I found the 32-bit drivers and the procedure should be very similar, except that the files are SP34789.exe and SP34789.cva). Type the following command in your browser address bar ftp://ftp.hp.com/pub/softpaq/sp35501-36000 to half way down you will find these files. Just right click on them and save it on your desktop. (The 32-bit files are in a different subdirectory to ftp://ftp.hp.com/pub/softpaq/sp???-?)

  Double-click on SP35558.cva and tell Windows to use Notepad to open it. Scroll to halfway down to "[Operating Systems]" and after 'WV64UL = OEM' insert:
  W764HB = OEM
  W764HP = OEM
  W764PR = OEM
  W764UL = OEM

  (For systems 32-bit using W732HB = OEM, etc.).

  I then went up to about 10 lines "[system information]" and added

  SysId3 = 0 x 3091
  SysName3 = HP Pavilion ze2000 series
  SysId4 = 0 x 3096
  SysName4 = Compaq presario M2000 series
  SysId5 = 0 x 3097
  SysName5 = series Compaq Presario M2000
  SysId6 = 0 x 3097
  SysName6 = series HP Special Edition L2000
  SysId7 = 0 x 3093
  SysName7 = series Compaq Presario M2000
  SysId8 = 0 x 3093
  SysName8 = series HP Special Edition L2000

  I got this information from another cva file on my PC C:/swsetup / (this is the default for HP updates directory).

  After modding the cva file, I taped C; / swsetup/sp35558 /.

  Then I ran the SP35558.exe file and voila I had sound, beautiful crisp clear sound.

  The use of the CAL file is to streamline the installation of the driver and that's kind of cool if it works. If you can't find it, you don't succeed the first time, or you don't want to not bother with modding anything, don't worry, the installation manual will work for sure.

  Run sp35558.exe to extract all and let write off. Then go to Device Manager and update driver manually as follows:

  In Device Manager, right click "Multimedia Audio Device" under the heading "Other" and choose "update driver" and then "Browse PC" and "choose from a list. Select ' Audio, audio and game controllers', then 'Conexant', then 'drive '. Navigate to C:/swsetup/sp35558/and open "cp6308Ba.inf" (don't forget 64-bit). Now click 'OK' and ignore all the warnings on the incompatibility, WHQL, etc.. Give her lots of time, you might think, you are in a loop, but you're not. Congratulations, you've completed.

  I hope this helps.

• Windows 7 Professional: "another program is installed. Please wait until the installation is completed, and then try to reinstall this software. »

  I get this error message (see title) when I try to remove existing applications or to install new applications.  I upgraded this Compaq CQ50z-100 of Vista Home Basic in a 2 step process:

  Windows 7 Home Premium upgrade

  Windows 7 Professional upgrade

  Once I had upgraded to Home Premium, I started to get this message.  Thinking that I can fix by the Win 7 Pro update, I proceeded with the upgrade (success, no problem).  However, the problem persists.  I tried to perform a "clean boot" and then "Normal Startup - load all the drivers of devices and services" and I still get this error.

  Need advice on what to do to solve this problem... short recovery in the image of Vista Home Basic original recorded via Norton Ghost 15... :(

  Thank you Andre,

  Since posting this thread, I found a solution.  The solution was to reset Windows Installer (1 to off, and then back to the manual) using the console of the computer/manage.  I edited the setting Windows Installer via "Services and Applications view (tab 'Standard' of Services).  First round of "Disabled" to "Manual", restarted and all then it 'Manual' and rebooted one last time.

  In a note, my issue was with Norton Ghost 15.  I had installed on the original view of Vista Home Basic, but found I could not it starts successfully after the 2-step 7 upgrade Premium.  Remove failed.  I've finally finished the removal after completing a full installation of Ghost 15 new (seemed to have lost some registry key values/entries).

• I get an error code: 81 - another installer is running and must be closed. What should I do?

  "I'm unable to install the update to creative cloud because I get the error code: 81 - another installer is running and must be closed. How can I fix it? Thank you.

  Please follow the solution 2 in the link error: "unable to install". Creative Cloud Desktop , and then reinstall the application.

  Hope this will help you.

  Kind regards

  Hervé Khare

• CC Desktop 1.8.0.447 installation corrupts db and app associations

  I attended 2014 Max this week and was very happy to come back to update the creative Cloud Desktop application and install all app updates. The first way, I tried to do was created hours of frustration and futility technical support calls. I started by clicking on the icon of the menu 'cloud' and install the 1.8.0.447 build.

  After you install the update, the applications in the application of CC Desktop tab presents you with a rotating wheel loading and only shows you one of the applications that are currently installed. There are several procedures that Adobe and other members of the forum have listed the previous builds that guide you through suggestions on how to remedy this. Some root causes like legacy CS5 install, etc., are not applicable. The important first step is to access your OOBE folder and remove the file opm.db (as part of these steps App will not open |) Wheels of progress turn continuously). Following this procedure has sent me on a path that has completely messed up my install Desktop CC.

  After the last step, then by restarting desktop CC, the applications Panel charge - with one major exception - all relationships between installed applications and think that CC Desktop is installed has disappeared. Not only is it recognizes correctly what is installed but there is apparently no way to re - associate within the app!

  I came to generally enjoy the desktop CC as a centralized application for updating all programs, it is an improvement of the more archaic the AAM update, which is always accessible from applications via help > updates. But I remember at the time where you used to have to download an installers run manually one at a time, so I'll take it.

  That said, this current iteration has crashed and burned, and the only solution after two interviews with Adobe technical support is «sorry,» that you will have to uninstall and reinstall everything This is NOT acceptable. Some of these applications have gobs of presets, plugins, settings, etc, and I can easily jump a day everything is up and running. As it is, I lost 6 + hours trying to get to the next step.

  My last attempt involved using a Time Machine backup and restore the following files (after the closure of all CC desktop applications). It's always a crap shoot because I can not restore all necessary files (although I think that I have now down), and there are 'invisible' files that could be missed. With that, I restored it:

  • < User folder > /users/ / Library/Application Support/Adobe/AAMUpdater /.
  • < User folder > /users/ / Library/Application Support/Adobe/AAMUpdaterInventory /.
  • < User folder > /users/ / Library/Application Support/Adobe/OOBE /.
  • < User folder > /users/ / Library/Application Support/Adobe/caps /.

  
  

  (hidden ~ / library)
  

  
  

  • ~/Library/application support/Adobe/AAMUpdater /.
  • ~/Library/application support/Adobe/OOBE /.

  After you restore these files, I restarted, and I see that my MAO appears at the top of the page system menu bar indicating that there are 16 updates (it's good!), and the CC desktop icon, when you click Watch there is an update (version indicated above).

  As this is the 3rd time that I did, what I call my point of branching - the last two attempts, both were followed by the installation of the new CC desktop application, which puts me exactly in the order listed above. White apps screen spinning. Then I delete the opm.db file, and we're stuck.

  Just for fun, I opened the application AAM, and is list all the updates for applications. And I have not yet updated the desktop application. I'm nervous for updating applications outside the application of clouds... but I plan to do that. Uninstalling the creative application of Cloud Desktop, reinstall with the new one and I was wondering if it will be picking up on the applications that are currently installed and the versions I am running.

  At this point, I expect to see if I have to:

  (a) uninstall CC desktop and download the latest installer and try it - would it be different just update?

  (b) run the updates for the most part, leave CC quiet Office and weather the storm until the next generation coming. Install the next version, even after, pick them up later (after all my updates) databases and run correctly?

  Thoughts are appreciated, thank you!

  Thank you
  Stephen

  * UPDATE *.

  Called support of Adobe for a 3rd time, and this time had someone who was willing to work with me on this. Since the past two times we used the option 'Install now' Creative Cloud Desktop for update application, which usually leads to failure, we have tried to dump the current installation and fresh start with the Desktop App. CC office uninstall removes all installed programs.

  Try this alternative method we:

  1. Uninstalled Créative Cloud Desktop application
  2. Restarted
  3. Downloaded and installed the latest version of Creative Cloud Desktop free Creative Cloud | Download the free trial version Adobe Creative Cloud
  4. Once she started, it took about 20 seconds for the synchronization upward with the applications that I have currently installed, but acknowledged that they were there and said there were updates!
  5. A ran all updates

  That's why I rarely take the first 'no' as an answer...

  I hope this helps someone else.

  Stephen

• Installation MS AD and Exchange Connector on a single connector server.

  Hello
  
  I have to install MS AD and Exchange on a single connector server.
  
  I configured and installed this con .NET Server as directed by the documentaion as it works well.
  
  With regard to the installation of the 11.1.1. MS AD & Exchange Connector on this server, the oracle documentation says to both of them that:
  
  Starting from the installation media, copy and extract the contents of the bundle/ActiveDirectory.Connector-1.1.0.6380.zip file in the CONNECTOR_SERVER_HOME directory.
  http://docs.Oracle.com/CD/E22999_01/ doc.111 /e20347/deploy.htm#BGBHFEHF
  
  Starting from the installation media, copy and extract the contents of the bundle/Exchange.Connector-2.0.0.1.zip file in the CONNECTOR_SERVER_HOME directory.
  http://docs.Oracle.com/CD/E22999_01/ doc.111 /e27258/deploy.htm#BGBDFHDD
  
  I have server connector installed on the machine as C:\Program Files\Identity Connectors\Connector Server\
  
  So I think that above Server Connector DIR will be the CONNECTOR_SERVER_HOME
  
  My query is:
  
  (1) for the installation of a single connector (say AD), I have to just extract content of ActiveDirectory.Connector - 1.1.0.6380.zip and paste them on the C:\Program Files\Identity Connectors\Connector Server\?
  
  (2) what can I do, f I have to install the Exchange Connector as well? I noticed that bundle of Exchange and the AD have common files.
  
  Kindly let me know the solution/steps, or something I can do bad
  
  Edited by: 902488 Sep 26, 2012 12:04 AM

  I think you're talking about files such as ActiveDirectory.Connector.dll, ActiveDirectory.Connector.pdb, Interop.ActiveDs.dll, Shell.ScriptExecutorFactory.dll and THIRDPARTYREADME.txt.
  They are ABSOLUTELY identical files for the two AD and Exchange clusters. There is therefore no problem.

• iMac 2015 Unable to Boot Camp and Windows Installer

  I've been back and forth with a Service guy to customers by phone, but thought I'd throw so the question in the case to see if there were others who have experienced similar problems and might be able to help.

  I have an iMac, retina 5K, 27 - in, end of 2014. It allows to launch the Boot Camp with Windows 8.1, which I put in place about 1 year ago. It worked very well. But then, I decided to try to upgrade to Windows 10 about 3 weeks, which is not well. Decided to erase the partition via the wizard Boot Camp and re - install from scratch.

  Now, I can not install Windows at all. I've tried everything. Using another ISO downloaded from the Windows website. Check disks using first aid. Last night I even totally erased the readers (via the terminal in recovery mode, with the help of the man of CS) and made a "Reinstall internet" of the operating system and then tried in boot camp. Without success.

  I tried to call Microsoft too, but their position on the whole thing is "this is on a Mac, this is the problem to Apple. Bye. »

  Appearances, Assistant Boot Camp is successfully created a partition. The system resets the Windows installation each time and I spend the flow rate of the installation until I get to the section "where you want to install Windows? I select my Bootcamp partition, format and then click Next. That's when I get the error message "we could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

  If I quit the installer and restart on the side OSX, I see that the new partitions is to Windows NTFS, so it seems ok. I am completely puzzled and frustrated as * at this stage.

  Any thoughts? Ideas? Help? Please?

  Data sheet:

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz of Intel Core i7 processor

  16GB 1600 MHz DDR3 memory

  AMD Radeon R9M295X graphics 4096 MB

  What are the external devices connected to the iMac during the installation of Windows?

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• Installation problems Thrones and Patriots

  Hey everybody. I have installation problems with elevation of the thrones of nations with the Patriots. I installed rise of nations but the installation successfully Thrones and Patriots he wins in a file called CTW_New_World_Map_01_info_text.xml.18 and then says check to see if I have available disk space, or if the file is in use. It's a brand new model with no other games on it.

  Hi Riseofjohn,
   
  1. have you checked the disk installation for scratches or damage?
  2. don't you try to install the game in the other computer?
  3. What is the operating system that is currently installed on your computer?
   
  First of all I suggest to perform a disk cleanup and check whether the problem is resolved.
   
  The disk cleanup tool helps you free up space on your hard disk to improve your computer's performance. The tool identifies files that you can safely remove, and then allows you to choose if you want to remove some or all of the files identified.
  
  To use disk cleanup in Windows 7 follow these steps below.
   
  a. Click Start, click programs, accessories principally made, click System Tools and then click on disk cleanup. If several readers are available, you may be asked to specify which drive you want to clean.
  b. when disk cleanup has calculated how much space you can free of charge, in the dialog cleaning disc, scroll through the content of the files to delete list.
   
  

  Disk Cleanup dialog box

  c. clear the check boxes for files that you do not want to delete, and then click OK.

  For more options, such as cleaning of system restore and files copy of Shadow, under Description, click on clean up the system files, and then click the other Options tab.
  d. When you are prompted to confirm that you want to remove the files specified, click Yes.
   
  After a few minutes, the process is completed, and close the Disk Cleanup dialog box, leaving your computer more efficient and clean better.
   
  I also suggest you to run chkdsk.
  Follow these steps:
   
  a. click on start
  b. Type "cmd" in the start search box
  c. right-click on cmd.exe list programs and then select the run as Administrator option. If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  d. in the command prompt window, type the following command and press enter Chkdsk/r X:
   Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.
  a. press y when you are prompted to check the drive the next time the system restarts.
  b. close all applications and restart the computer.
   
  Note: upon reboot, Windows checks the drive for errors, and then Windows starts
  
  After the computer restarts, repeat steps 1 through 4 for the other volume and then check if the disk cleanup works.
   
  If the steps provided above does not resolve the problem then I suggest to install the game using the cleanboot and check for the issue.
  Put your system to the clean boot state helps determine if third-party applications or startup items
  the origin of the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and re-
  install the program.
  See KB Microsoft article below for more information on how to resolve a problem by doing a
  clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135  
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above KB
  article.
  I suggest also allows you to check the compatibility of the game with the Windows 7 operating system.

   

  To do this, you can visit this link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/         

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Installation of KB2686509 and get the error 0xF0F4 (WinXP SP3 integrated)

  I have a number of point of sales systems that we are trying to get updated, and while any other update installed correctly, this last updated simply won't be installed.

  -FaultyKeyboard.log file is generated and consists of a single entry: kbd106.dll.  This dll does not exist anywhere on the devices in question.  In addition, there is no entry in hklm\System\CurrentControlSet\Control\Keyboard Layouts\ to this .dll.  The only entry in the registry that I can find about this file is in hklm\System\CurrentControlSet\Control\Terminal Server\KeyboardsType Mapping\JPN\, and removing the entry, followed by resetting clearly isn't the issue.  To be clear: the test at this stage machine doesn't have the .dll file or all the registry entries that apply and it continues to generate the FaultyKeyboard.log file.

  -Downloaded and run the Fixit50882 to see if he can do something more than what I did manually. It returns a message that "this Microsoft Fix it does not apply to your operating system or version of the application.  A not uncommon issue given that as long as they are XP machines in almost every way, they embedded XP.

  -J' manually checked that there are no results for map IgnoreRemoteKeyboardLayout and ScanCode anywhere in the registry.

  -Here is an excerpt of the file kb2686509.log for the last attempt to install:

  0.062: ================================================================================
  0.062: 10:04:45.750 14/01/2015 (local)
  0.062: C:\WINDOWS\SoftwareDistribution\Download\28732624e5a40302f9eea333a7a9228d\update\update.exe (version 6.3.13.0)
  0.078: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  0.078: impossible to activate SE_SHUTDOWN_PRIVILEGE
  0.078: hotfix started with following command line: - q - z - er /ParentInfo:a252d3412b1187499cbd24968cdae6a3
  0.078: in function GetReleaseSet, line 1211, RegOpenKeyEx failed with error 0x2
  0.078: in function GetReleaseSet, line 1240, RegOpenKeyEx failed with error 0x2
  0,265: return the value of IsMachineSafe = 0
  0,265: IsMachineSafe return 441092
  0,265: condition in Prereq.IsMachineSafe.Section failed with the fist
  0,265: Check condition for 1 line of prerequisite returned FALSE
  0,281: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,281: KB2686509 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  0,281: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,281: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  0,281: Update.exe extended error code = 0xf0f4

  -Regarding changes to systems, they are few. Previously, they had been in a subnet isolated, unable to be routed.  With the evolution of the security standards, we had to set them up so that they could be updated.  It necessary to change the subnet to be routable, but with a firewall very limited for the subnet, configure a WSUS server for updates for devices, change the levels of NTLM authentication, installation of the SP3 for devices that were missing, install Windows Update Client v3, import of configuration of WSUS in the registry database (as they are not on the field) and install Bit9 agent in the single mode of visibility.  WSUS shows that 220 updates have been installed, 3 have not been installed and 1 failure (2686509).

  -The devices in question are touchscreen point of sale devices and don't have connected keyboards (but have USB available).

  I managed to track down a copy of the kbd106.dll file and copy it in the %SystemRoot%\System32 folder, which seems to have allowed the update complete at last.  The challenge was to find a good copy of the file in question.

• What would cause third-party software not to install if Windows Installer is running and up to date, and the PRC is launched?

  Still trying to install a printer from Eastman Kodak to a computer that was just recovered. I have new versions of Windows Insataller and the third-party software for the printer. However, even when I put the installer on "automatic" and "start" the service, it won't stay like this. I run regedit, msiexec.exe / unregister and msiexec.exe/regserver. Nothing happened. I checked the system had full access to HKEY_CLASSES_ROOT. no problem. I ran chkdsk. Hard drive looks very good.

  I need a response that I'm getting a little irritated that something as simple as install a printer should take this amunt of work. Oh, BTW, running Windows XP Home Edition, 2004 computer version. I don't know if this helps or not. The only thing I'm NOT willing to do is another system of recovery. That's how I got here in the first place. So, if anyone out there has suggestions, ideas (no matter how strange), ar solves this problem, I would greatly appreciate a response.
  Thank you
  songtothesirens

  Hello

  Re-install Windows Installer and see if it helps.

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003

  Note: Run method 2 from the above link.

  Hope this information helps.