Scan codebar with camera (not QR)

Similar Questions

• It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I do not understand t

  It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I don't get that annoying block in Internet Explorer. I uninstalled and reinstalled firefox and when I did, the first thing is present at his inauguration was a message that says: "you have joined the shop now...". "something or another and I had to click OK, it was a microsoft OK message. How can I get rid of this?

  URL of affected sites

  http://www.BestBuy.com, target.com, any site of retail trade

  Your problem can be caused by Malware. You can run and update according to free anti-virus software:

  1. Malwarebytes (free version) - http://www.malwarebytes.org

  2. Spybot Search & Destroy - http://www.safer-networking.org

  3. Spyware Terminator - http://www.spywareterminator.com

  In addition, there are a number of forums, you can use to help get rid you of your infection. It is:

  • Bleeping Computer
  • Safer-Networking Forums
  • Spyware Warrior forums
  • SpywareInfo Forums

• I bought a computer from a business and it came not with all drives.

  Original title: I bought a computer and it came not with all drives.

  I bought a computer from a business, and it was a computer on the network. It came not with all drives. Is it possible to reformat the system with out having to re - buy windows xp or office? Can I get copies of XP and Office? I still have the XP sticker with the computer.

  If they don't give you the disks, all you need is a boat anchor. Ask them to give you the disks and product keys. Otherwise, you will need to buy.

• Anyone know why, when I try to open an image with camera raw in Bridge, it is said: "the camera raw editing is not enabled.

  Hi guys,.

  Anyone know why, when I try to open an image with camera raw in Bridge, it is said: the camera raw editing is not enabled. Camera raw edition requires a product calling has been launched at least once this feature.  What should I do?

  Thanks in advance :)

  original title: problems of camera raw

  Try the Adobe forums

  http://www.bing.com/search?q=Camera+raw+editing+requires+that+a+qualifying+product+has+been+launched+at+least+once+site%3Aadobe.com&qs=n&form=QBRE&pq=camera+raw+editing+requires+that+a+qualifying+product+has+been+launched+at+least+once+site%3Aadobe.com&sc=0-0&sp=-1&sk=

• CC 2015 not open in photoshop with Camera Raw CR2 raw files, please help?

  It works very well so far.
  I have a mac OSX 10.8.5, photoshop is installed and up-to-date - CC (2014). I own a 700 d camera Canon. I have not recently updated the operating system of my computer, photoshop and camera raw have been working well since creative cloud last updated - a month ago?
  When I try to open a raw file (open with > adobe photoshop)
  

  I get this error message
  

  I had this also when I tried to go file > open recent > IMG_138.CR2. So I went to photoshop > Preferences > camera raw... to see what was going on and I got a different error message

  I had this same error message when I tried to look in photoshop > about plug-in > camera raw.
  Camera Raw works not in Photoshop Elements.
  

  But this makes no sense because I can open raw files yesterday, everything worked fine. In Photoshop Elements, I went to Photoshop Elements > about plug-in > Camera Raw, but all I get is the following:
  

  When I click it, it disappears. When I go to photoshop elements > Preferences > plugins, camera raw does not appear:
  

  
  Photoshop Elements open digital, negatives, but Photoshop won't and I get the same dialogue "cannot recognize the file type. I doubt that using a digital negative converter / raw file will change that. I need camera raw to work in photoshop.

  I restarted my computer, when I uninstalled and reinstalled photoshop does not solve, but again, I got the same answer.

  
  My computer must have a certain amount of available storage space for camera raw to run? The only thing that has changed on my computer since I was last able to open files in photoshop raw is the amount of space on my computer - since the importation of raw files from my camera using image capture I have only 32,37 GB left on my computer (raw files take up a lot of space!). I made were not all other massive applications opened while I did it then he should have enough ram. I have an external hard drive, I can move pictures to to free up space, but if this should not be a problem for camera raw then I don't know what else to do.
  
  The only other thing I can think who might have caused it, that's the last time I opened photoshop a few days ago, I received this warning message
  
  I just clicked 'OK' and after that the raw camera seemed to work perfectly fine. It worked as he normally does, so I assumed nothing was wrong and that the acceleration of the GPU or anything that was is no longer disabled. Now, I can't even open dialogue Camera Raw Preferences.

  I looked in the application of plug-ins, I'm not sure what is supposed to be there but Camera Raw is certainly not. The generator folder is empty - is this a problem?
  

  I tried looking through the other threads on this kind of problem with camera raw, but I have seen one for 2015 of CC, and still less one where he was working very well and now is not, or that the operating system has not been updated recently. I prefer not to update the operating system of my computer, it would be the first thing you suggest. I don't see how it could be the fault of the operating system - it worked fine until today. He managed the CC perfectly well up-to-date.

  It is vital that Camera Raw is operational, I need it for my college photography class work and assignments. It would be pretty boring and very embarrassing if the only way I could get my work would be to travel to use the computers on campus, especially since I'm paying $28 (NZ) a month for this software (which is more than the city $14,99 per month for students of secondary and tertiary).

  Help would be very appreciated!

  Kind regards

  Ellie Crowe

  The ACR 7.4 700 d or newer of the 70 d (if there was typo) requires and ACR, 8.2 or newer.

  PS CC 2015 as the title says needs OS X 10.9 or newer so PS CC 2014 is the most recent CC PS, you can run on your 10.8.

  11 elements of Photoshop that supports RTAs 7.1 also supports ACR 7.4, so you should be able to update your PSE11 to 7.4 of the cab and open the 700 d raw files.

  --

  It is unclear why your PS CC 2014 cannot be updated at least 8.2 RTAs that must run on your old operating system.

  I would be completely uninstall the PS CC 2014, reboot, then reinstall and use the help / updates to see if you can get a new Camera Raw plugin that works.

• I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE. Help me please

  I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE generated by NIKON 610. What can I do?

  Hi danielem,

  Need you minimum Photoshop CS6 & Camera Raw version 8.3 use of Nikon 610 RAW files.

  

  see the related link: supported by Adobe Camera Raw devices

  However, if you cannot upgrade to Adobe Photoshop CS6, then you can use the DNG Converter to convert your images to DNG and use it with Photoshop CS5

  Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.3

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.3

  Let us know if that helps.

  Kind regards

  ~ Mohit

• I use Adobe Photoshop elements with Camera Raw 7.1 11 I am trying to load my Canon 70 d raw file. It will not load. How can I update my version of Camera Raw?

  I use Adobe Photoshop elements with Camera Raw 7.1 11 I am trying to load my Canon 70 d raw file. It will not load. How can I update my version of Camera Raw?

  ralph47 wrote:

  I use Adobe Photoshop elements with Camera Raw 7.1 11 I am trying to load my Canon 70 d raw file. It will not load. How can I update my version of Camera Raw?

  The answer lies in this faq:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  PSE12 cannot be updated to the required version of ACR, 8.2, you need PSE13.

  This faq has links to see the whichACR version are necessary for a camera and which is supported by your version of elements.

  It also has links to download the free Adobe DNGconverter which is a stand-alone software to batch convert your files CR2, DNG format raw that your elements version can read and modify.

• Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW

  Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW plug-in. 8.4 the old and the new 8.7. But it does not work. Have removed and reinstalled several times. What is going on? Why can't update bridge to the last version 8.7 or read my raw files from the Canon 7dmk2?

  Try this:

  http://blogs.Adobe.com/Crawlspace/2011/03/keeping-Photoshop-up-to-date.html#NotConnected

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• Error! Camera not available!

  My phone frequently returns a message "error!" Camera is not available! "at the opening of any application that uses a camera. In this case, especially when applications that analyze bar codes them are used ('AT & T-Scanner of Code","OK Scan"), but not exclusively. Among the applications, bringing the camera to an accident there are some reputable, like for example "perfectly clear." In emergency mode, the camera works OK.

  The question is the same as in this thread for Z1, but it disappoints me that the same thing happens to Z3 which is much more recent.

  Support advised me to erase the data from the camera (Applications menu) and restart the phone. This helped a lot, so it is advisable to reset the phone to factory default. I did it twice, cause from the first time I've found exactly what apps has caused the problem. It took me a day to put everything back in the original state .

  Subsequently, the camera has been blocked by 'Perfectly clear', a decent application written by a "best programmer." I was depressed.

  However, there is a solution: the simple clearing of all applications running in the background (['three permanent key down' |]) "two rectangles | (all erase], or [an icon with a green brush]). This allows without rebooting.

  I hope that Sony issues a correction for analogue to this post for Z1 Z3 as soon as possible.

  IT FIXED! problem with the camera not available error AND flashlight missing has been resolved by installing the new camera. It is a HARDWARE PROBLEM, not a software problem. Clear your cache all you want, it won't help. Removing applications will not help. Physically change the camera worked. Although the factory seal is gone so now it is probably more waterproof.

• Camera not working - seems to have disappeared?

  Hello - I searched for this question but couldn't find answer to my question. I get the message 'no camera not connected' when I connect to Photobooth and tried "sudo killall" stuff but keep not getting the error "no matching found process."

  I then had a glance system information and under camera, it says "no video capture devices found '.

  My camera has been removed? My son pulled the macbook on the floor the other day and I thought that he had escaped unscathed but wonder if he has fucked the camera?

  I'm on a retina Pro 15-inch early 2013, 2.7 GHz, 16G if this is helpful to all.

  Thanks in advance!

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  MrsLister wrote:... Information System says "no video capture devices found '...

  Lack of Information system to recognize your camera is normally an indication of a hardware problem.  There is no serviceable parts by the user of the camera to the Mac.  With the help of equipment, contact one of the Apple-Authorized Service provider or Apple for service.

  Post edited by: Jim EZ

  Mac OSX 10.11.3

• Camera not properly initialize since v. 4 - PROBLEM SOLVED

  I'll preface this with have not only I've done several ' resets all the ', I deleted all the files from camera loaded on the SD card that have been created in v.3 and after 'Reset All' was performed manually via the menu and re configure all my preferences instead of loading old sound of the SD card.

  With that of the road, my problem is 80% of the time that I start the camera with power supply or a battery, the unit freezes at the Sony logo on the submenu. Power must be cut (which has no effect), power removed/disconnected, wait the Sony logo screen disappears and then try to restart. It usually takes 2-4 trys until the camera manages to move to the "Sony" screen and performs full initialization upward. IM dreading the day that this happens on a job and the camera completely fails to start completely. I NEVER had this problem with all previous firmwares. Anyone else having this problem and any advice on how to solve this problem?...

  Side note: my first F5 made the day I brought home from Abel a year ago, but in this case the start of Sony screen wouldn't go away no matter what I or Able tried to do. They talked to Sony and said send it back, fortunately Abel gave me a new on-site and I never knew the question once again. Until now...

  UPDATE: May 30 - problem solved.

  Well it seems that everything has been healed. I went to Sony to Teaneck service yesterday and they replaced "PCB of HIF - 64" or, as we have been referring to him as the SDI card. Also updated the wheel to stop ND, design much better. Engineers, that I talked to had seen cameras having the same problem as me and reinstallation of the map is the apparent cure. Spoke with a Senior technician there for a good 45 minutes a range of topics. Was'nt able to get new information out of him, but he was very helpful and insightful no less. He said that the Japan is aware of the issue of sensor grid that some people have, but they have not been told that the solution will be even.

  Thank you Alister, I'll give them both a go and communicate the results.

• When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its id.

  When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its ID thanks

  It seems that if the application has been downloaded on his iPad while it is connected to your Apple ID. If so, he'll always want to be updated with your Apple ID.

  You must remove the application from his iPad and then download it again while it is connected to its own code of Apple.

• Photosmart HP 7520: Scan to email does not work

  Hello

  For the last few days I am facing problems of scan to e-mail function. It gives me an error - "failed to connect to Web Services. "Confirm access to the internet and try again. I checked access to internet, is turned off and turned back on, but everything is fine, except that scanning to e-mail still does not work.

  I also tried the suggestion of manual entry of the DNS server in the DNS address configuration, but it does not work.

  Kindly help.

  Kind regards

  Alok

  Hello @alok7,

  Welcome to the HP community!

  I understand that you have a problem with scanning to E-mail app on e-all-in-one printer, HP Photosmart 7520. I'd love to help you with this.

  Here are the steps I suggest to try everything first:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  You mentioned that you have already tried defining a manual DNS for your printer, DNS that you used. If you have not already tried so, I suggest to use primary like DNS 8.8.8.8 and 8.8.4.4 as the secondary DNS.

  If your web services connected, even if scanning to email does not work, you may need to reset the web services on the device.

  NOTE: Reset web services clears the custom email ePrint you have configured on your printer. Please be aware that if you have a personalized email ePrint, after doing this, you will need to configure again and will not be able to use the same address.

  1. press the Web Services button on the front panel.
  2. tap on settings.
  3. pressremove web services"and confirm deletion.
  This will bring you to the homepage.
  4. press on the icon Web Services , once again on the printer and go through the installation process.

  5. once the web service has been activated again, try to configure your scan to E-mail

  Please reply to let me know if these measures have helped to solve your problem.

  Thanks for posting!

  

• MAX finds a camera but Labview IMAQdx gives the error-1074360311: camera not found

  Somehow Labview does not seem to see what is happening in the measurement and automation Exploerer (MAX).  MAX works very well and my camera plugged into a card PCIe-1433, works very well.

  LabVIEW sees it not at all.  Session commands are empty, the enumeration cameras VI IMAQdx returns an empty array and all calls to open, snap, seize or close the interface (I use the name of the interface of MAX because session orders will not autopopulate) give all the-1074360311 error: "Camera Not Found".

  Somehow Labview does not MAX.  I tried to delete all the .idd files and recreate them, with the same results.

  Here are some details:

  LabVIEW 2011 (11.0.0)

  Module Vision Development 11.0.0

  IMAQdx 3.8.1

  IMAQ 4.6.1 is also installed

  The only other references I found for it is here: http://forums.ni.com/t5/Machine-Vision/camera-not-found-imaqdx/td-p/1323861/page/2 but it is more info on not opening properly references rather than do not find them at all.

  Any suggestions would be very useful,

  Casey

  I think it's because you use IMAQdx rather than IMAQ. All framegrabbers nor (for example the 1433 you use) are supported by the API IMAQ, not IMAQdx. You should be able to open the IMAQ examples instead, and I suspect that will solve your problem.

  Eric