scan from my printer works then I get access denied box if I tag or not in vista 32 bit system-will not let me import the document

Similar Questions

• OfficeJet Pro 8620: can not scan from my printer on my computer

  Hello. My computer recently downloaded windows 10 and since then I can not scan from my printer to my computer (although I can scan my computer on my printer).  I get the following error message (and hp scan doctor found no problems): "the analysis could not be performed because of one or more of the following problems: - computer connection is lost, the application of scanning the computer is currently in use, OCR application - is not installed on the computer.

  Is there a way to fix this?

  Thank you!

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer

  Once you have installed the software,

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)
  

  

  Hope that helps.

• HP deskjet 3050 j610: when I try to scan from my printer it will not connect

  When I try to scan from my printer I get a message "Cannot find HP deskjet 3050 j610. But I can print from it and get data as ink tank printer. It started abruptly today. It worked OK until a few days ago.  The printer is connected by a USB cable. I tried the driver update and 'repair' menus via HP scanning problems without success.  If I press scan on the printer button it says "scan error. try to scan from computer', but that's what I usually do using the calculation icon in the menu START.

  I solved the problem. The basic steps were (1) using the HP links to update my driver printer and research to find errors in the scanning program. (2) restart my computer and printer. After the first part, I didn't see any listed results. Normally I would have restarted the printer and the computer, but is afraid of losing my sites and the investigation, so I kept looking for the various comments.  I found a reference to this site in one of the post near mine for a #7520 device but cannot return immediately to give the author of the post. I think I sent him a response.

  http://support.hp.com/us-en/document/c00040499.

  This site gives lots of tips for different situations and devices. I followed the advice that it applied to my computer and printer who ended with step 2 (I use a USB connection) and the scanner was working again.

• Why do I get access denied error when I try to connect to the printer?

  * Original title: Please help me

  Why do I get access denied error when I try to connect to the printer?

  Hello

  Try right-clicking on the printer software when installing it and select run as administrator.

  See you soon.

• OPM get a "this file is not found error" but the document opens without plugin

  I'm under 64-bit Windows 7, Word 2010, OP 10.4.4.21.

  The scenario is strange.  Everything has been fine until today.  Something has changed, and now I am unable to open all the OPM Word documents (or compile compile all).  When I try, the error message ' Oracle Policy Modeling could not open document, such that an error has occurred in Microsoft Word: this file was not found ".". "  The document opens, however, but the plugin is not displayed.  I tried to reinstall OPM several times without success.  Indeed, during install it first a couple I'd always get the error message, but CERTAIN documents open with the active plugin and I could compile in the document - and some wouldn't have the plugin.  After another reinstall, OPM still throws the error, and documents open always in the background, but without the plugin active or exposed.

  I also tried to Repair Word, but do not want to reinstall office.   Excel seems to work very well.  I don't really know what was the triggering event.  The project has been using subversion when he arrived, but now all the projects on my machine, subversion or not, are concerned.  I think it's just my machine and others do not see this problem.

  Has anyone seen this?  Something corrupt?  It's almost like the word invocation simply does not work properly.

  Help!

  Thank you very much.

  OH - I found and fixed it.  Word has disabled the "Add-in".

  1. Click the File tab, click options.  A popup options will appear and then click Add-Ins.
  2. In the box macros complementary , if you see that policy modeling Word 2010 Template.dotm is disabled, you will need to enable it.  Downstairs, choose from the menu drop-down handle and click on the button 'Go '.
  3. Select the type of "Disabled" in the Management area, and then click OK.
  4. Select the item to activate, and then click the button 'Activate'.

  
  

  It was something that should have been easy.  We have a couple of experts of the Oracle takeover bid on the site and they didn't, and R & D in Australia has yet to respond to us.
  

• After the upgrade to v 29 I get "Access denied" page now many pages

  Hello, I have just upgraded to Firefox 29, restarted the browser and now get a page saying "Access denied" trying to access many pages. For example, I get "Access denied" when you try to go to one of: http://www.reddit.com/, http://oss.sheetjs.com/, http://www.techtalkshub.com/how-to-write-clean-testable-code/and http://www.techtalkshub.com/essence-c-examples-c84-c98-c11-c14/.
  It happened before the upgrade to v29.
  This does not happen, for example, google.com, linkedin.com
  I am on Windows 7

  I try to clear your cookies and cache first and then try them "the proxy settings no" If emptying the cache does not work.

• If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

  If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

  This is the Forum for Windows Update.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

  Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.

  Read the info here to see if you qualify.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

  FAQ about the upgrade is at the link above.

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a drive mapped to the network, but the icon is located in a folder. I get access denied when I click on the drive.

  I have a drive mapped to the network, but (My Computer) icon is a folder. I get access denied when I click on the drive. But if I open windows Explorer, I can access the drive mapped without problems. Win Xp

  original title: mapped drive error.

  Hello

  Make sure that the mapped drive is configured to share and works on part.

  Auto-mappage will not work if there is a problem with sharing.

  Maybe this can help.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• When you back up my files I get access denied (0 x 8007005) can it be repaired

  When you back up my files I get access denied (0 x 8007005) I can fix this so I can save, if so how

  Hello

  1 did you do changes on the computer before the show?
  2 are logged as administrator?

  You can disable the antivirus software and then try to perform the backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: The computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem

• Why can't I import a file that I converted to mp3 from youtube about Director? It keeps only let me import the first song I ever imported

  Why can't I import a file that I converted to mp3 from youtube about Director? It keeps only let me import the first song I ever imported

  Hello

  1. do you use Windows movie maker?

  2 are you getting any error code or error message?

  3. were you able to import the file before?

  4. have you made changes on the computer recently?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Problems with importing files into Windows Movie Maker:
  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

  Also, see the following Microsoft article and check if that helps:
  Importing files into Windows Movie Maker: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  It will be useful.

• Some records have locking and also get access denied to Admin account

  A number of issues such as "Documents and Settings" shows a padlock on them. When try to open get access denied. When trying to change permissions frpm properties/security it says access denied and it will not change.

  Are these files supposed to be locked?

  How can I unlock them?

  These are the points of junction : hidden, protected operating system files that are not intended to be viewed by the users.  Each of them points to a folder that is accessible to the user

  C:\Documents and Settings-> C:\Users

  In C:\Users\:

  Application-> \AppData\Roaming data
  Cookies-> \AppData\Roaming\Microsoft\Windows\Cookies
  Local settings-> \AppData\Local
  My Documents-> \Documents
  Neighborhood Network-> \AppData\Roaming\Microsoft\Windows\Network shortcuts
  Vicinity of print-> \AppData\Roaming\Microsoft\Windows\Printer shortcuts
  These last-> \AppData\Roaming\Microsoft\Windows\Recent
  SendTo-> \AppData\Roaming\Microsoft\Windows\SendTo
  Menu-> \AppData\Roaming\Microsoft\Windows\Start Menu start
  Templates-> \AppData\Roaming

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I can't kill the task. every time I have kill the task I get 'Access denied' HELP! ??

  I can't kill the task. every time I have kill the task I get 'Access denied' HELP! ??

  I was able to boot into safe mode, uninstalled Chrome and then reinstalled. Looks OK at the moment.

• I try to install Captivate on my computer, but I get an error that this product cannot be installed on a 64-bit system

  I try to install Captivate on my computer, but I get an error that this product cannot be installed on a 64-bit system...

  Not continue where to go from here?

  Hi Maurice.

  Thanks for the answer, I believe, a 32-bit operating system. I ended up searching on Google I found a download for 8 Captivate for 32-bit, but I can't find 9 Captivate to download 32 bit...

  Adobe - Adobe Captivate Support Center: downloads

• get access denied when I try to download adobe XI

  get access denied when I try to download adobe XI

  Hello

  Please download it from the following link: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  Kind regards

  Shipti