Why do I get access denied error when I try to connect to the printer?
* Original title: Please help me
Why do I get access denied error when I try to connect to the printer?
Hello
Try right-clicking on the printer software when installing it and select run as administrator.
See you soon.
Tags: Windows
Similar Questions
-
original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator
I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?
You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here
-
A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)
After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.
Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.
Any help is very appreciated.
Kind regards
HaleyHey HRolston,
What version/service pack of XP are you using?
What format of your hard drive is formatted to?
You can check the version/service pack:
· Click Start
· Right click my computer
· Click on Properties
· On the general tab, under System: you will see your information
For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3
You can check what is the format of your hard drive is:
· Click Start
· Click on my computer
· Right click on Local disk (c) (or letter that contains your operating system)
· Click on Properties
· On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)
Can't wait to hear back on your part.
Steven
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid
error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem
I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.
but when connect this device on windows xp pro his works very well.
but with vista I see this error msg
The handle is invalid
any idea to solve this problem?
Thank youYou can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.
Try to uninstall and then reinstall the modem again. Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph). Make sure that you uninstall in this order.
Are you sure that the modem is compatible with Vista and the rest of your system? What is the manufacturer, brand and model? You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Task Manager give me an access denied error when I try to set the affinity or end a process.
Hello
I tried to change some of the settings of my PC compared to a game do not set up for dual-core systems.
I tried to change the affinity settings in the Task Manager and I get an error of access denied even if I have one in an administrator account. I am the only user of this system and it is very frustrating to be unable to edit my own settings. I am running Vista 32 home edition on a system of dual-core AMD.
I also tried to change the affinity with the line of the command prompt and change the shortcut to do so, but this did not succeed. The command prompt will not find the program and when I use the shortcut to set the affinity with the command prompt, it didn't he open the window command prompt and nothing else. If someone could give me a hand here, I'd appreciate it. I am familiar with specific vagaries of Vista and I'm getting a little angry.Do you have UAC turned on?
If you do, then, when you're in the Manager of tasks under the processes tab, select "Show processes from all users" accept the UAC prompt.
This will be the the Task Manager with your administrator privileges. You should now be able to set the affinity. -
Get the error when you try to connect to the application of HFM of FDM (like Targe)
Hello
can someone help me when I open FDM and click metadata-> order pictures... and try to get focused on that time period, it generates an error "unable to authenticate the specified user %0. »...
Log file of this...
* Start the journal entry for the Runtime Error FDM [2008-11-07-06: 41:05] *.
-------------------------------------------------------------
ERROR:
Code...-2147220966
Description... Could not authenticate the specified user. %0
Error reference number: {06CFB6AF-0B83-40DC-8E32-EBD1275318D8}
NUM: 0x8004021a; Type: 0. DTime: 2008-07-11 06:41:05; SVR: DEV-HFM-APPS1; File: CHsxClient.cpp; Online: 2272; Worm: 9.3.1.0.1502;
Online: 391
Process... clsBlockProcessor.ActConnect
The component... upsWBlockProcessorDM
Version...................................... 931
Thread....................................... 4752
IDENTIFICATION:
User... osadashiv
Name of the computer... DEV-HFM-APPS1
App name... fdmapps
Client App................................... WebClient
CONNECTION:
Provider..................................... SQLOLEDB
Database server... 172.20.160.185
Name of the database... fdmapps
Trust connect... Fake
Connect status... Open connection
GLOBALS:
Location..................................... Sample
Location ID... 748
Location Seg... 2
Category..................................... WLCat
ID of the category... 12
Period....................................... Oct - 2008
Period ID.................................... 2008-10-31
POV Local.................................... Fake
Language..................................... 1033
User Level................................... 1
All Partitions... True
Is Auditor................................... Fake
I put the machine, global session logon information profile, etc... and already download 2 adapters... but still getting the same error...
Please help me...
Thanks in advance...Hello
It seems that something is wrong when FDM tries to connect to HFM.
You need to understand:
-To connect with FDM which user are you using
-Do you use unified or comprehensive as your method of connection (settings of integration)
-Have you attended a user in the profile of the machine?
-You entered a domain anywhere?The user you are using must have the access rights to HFM. Test it directly in the client.
Kind regards
Marc
-
Extended analytics. Error when you try to connect to the database
Hi all
We created the UDL file to the star schema database, and configure the DSN on EPM System Configurator (11.1.1.3)
UDL file is connected correctly, but when we try to 'Create star schema' we get an "Error occurred whil connection to the database" error.
Any ideas? are we missing something?
ConcerningHave you given the grant of rights 'connect' to the database or schema?
Varun
-
RAS error when you try to connect to the connection broadband cricket how can I solve this
error message
Hi r stars.
To focus in the right direction, we need the following information:
(a) what is you receive the exact error message?
(b) if it works well before?
(c) edition of windows vista you run on the computer?
Please provide more details about the issue you are experiencing for understand us to better the issue and help you solve this problem.
Please see the link below
List of Error Codes may appear when you try to establish a dial-up connection or a VPN connection in Windows Vista
http://support.Microsoft.com/kb/923944
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error when you try to connect to the root of the three armies...
Good afternoon
I installed and authorized the latest version of the Plugin of Dell OpenManage integration with VMware vCenter v3.1. I have a license of 10 host. I have two sites, managed by two different vCenter servers. I'm under ESXi 5.5 updated 3B and the latest version of the software, vCenter.
On the first site, I will have no problem connecting to the iDRAC and hosts. On the second site, I can connect to the iDRAC, but guests return with a response that says, 'Fail - unable to reach the host. Check credentials of the host, network connectivity or an agent of the OMSA (as appropriate). »
I checked that the credentials are correct. I have no problem of connectivity to the hosts, so I am at a loss here. Any help would be greatly appreciated!
Thank you!
antsmanThis error was caused by the fact that all the servers Dell before the 12th generation (12 G) require the OMSA (OpenManage Server Assistant) VIB installed in VMware, before you can manage the server. Generation of 12 and later built. The Dell documentation on it is hard to find and did not come with the OpenManage for VMware integration Plugin.
I found a link super site of a user on how to install the VIB.
Everything is good now!
antsman -
Im trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving a message saying that Windows Explorer as stoped working so I can't open any doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to m trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving one message saying that stoped working so I can't open Windows Explorer all doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to my admin accmy admin acc
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
Error when you try to connect to the Essbase Server
Apply after the patch 13904640 for EE 11.1.2.1 I can't connect with Essbase servers more. When I click on it I get the error message:
Error 0: the database does not accept a connection
All services have started without any error.
Anyone know what is happening?
Thank youI think it is useful to have a read of the following doc in Oracle Support - "impossible to add or connect to an Essbase server in Essbase Administration Services (EAS):" error: 0 in Essbase Administration Services: the database does not accept a connection "or" "error: 105: Login with token at MaxlJni" ' [1469492.1 ID].
Basically, you will also need to patch the RTC Essbase a.103 so
See you soon
John
http://John-Goodwin.blogspot.com/ -
"Limited or no connectivity" error when you try to connect to the internet
Original title: loss of LAN connection
You don't describe your home network connectivity.
Your symptoms like you plug a Cable Modem directly into a desktop machine and then you unplug the cable from your desktop computer and then connect on your Thinkpad. Unless pay you extra, cable modems are designed to give only a single IP address and probably what gave to the desktop machine. Unplug this unit and connect the Thinkpad modem view the other machine and refuses to give it an IP address because it already gave it on the desktop. One solution is to power cycle the Modem because it will then forget the desktop machine and allow the IP to the Thinkpad. A better solution is to buy a home router and place it between the Modem and the computer. You can then use both devices at the same time.
HTH,
JW -
"Access denied" error when updating driver
My monitor is an HP w2207h (screen 22 "HD flat). I get "Access denied" error when you try to manually update the driver by using Device Manager. When I use the installation of HP or Windows Update utility, I just got a message that an error has occurred. I've recently updated my NVIDIA driver using windows update (VISTA 64). On reboot, I get a message asking me to select a driver for my HP flat screen monitor. When I try to install the driver by using the auto option or by downloading manually from HP, I get an "Access denied" error message. I am the administrator on the computer. Can you help me solve this problem?
It is alittle bit of a lenghty process, but it should help to solve the problem. Follow the steps in this KB http://support.microsoft.com/kb/315539 to show the devices 'hidden' in Device Manager. Browse the list of drivers installed for the graphics card and remove all drivers that are "grayed out" then uninstall the drivers for your monitor. Restart the system and try to install the driver at that time here.
What can be produced is installed the drivers can interfere with the currently installed driver and this should allow the system to update the driver correctly.
-
Some users have received an "access denied" message when you try to access their files restored once a recovery has been performed. This can occur using Windows backup or backup HP (HP Recovery Manager). They can see the files and folders, but they can do something with them, as the security check to fail.
This occurs because the permissions from the previous installation are also saved with the files and it is a failure on the new system because the files have not been created on this particular installation of Windows.
However, there is a way to solve this error. Users can adapt the files and this should resolve the access denied"" message.
Here is a guide which explains how to do this.
I hope this helps with this particular issue.
-
Why do I get an unknown error when the AI document opening in Illustrator 5.5?
Why do I get an unknown error when the AI document opening in Illustrator 5.5.? How open/fix documents?
Did this happen after update to Yosemite? Sorry, but this could be a number of things and not only have a response
- disable the automatic plugin font activator which is delivered with the police officer, you activate a corrupt police.
- Clean your cache of police download nuke font it's free
- reset your prefs AI
- Delete your printer driver in the system preferences and recreate - Yes, there is a possibility that this can cause this
- hold off on the update to El Captan for now, even if an update of the system has a chance to eliminate the problem, you're on CS5.5
Maybe you are looking for
-
Can I use the Modem 3 G on my Tecra R950-104?
I have a Tecra R950-104, and when I remove the battery, there is a 3 G Sim Card slot, just like it says in the manual. The problem is that Windows (Win 7 64 bit) does not recognize any 3G modem in the computer. So, this means that only some models ha
-
HP pavilion dv2700 Notebook PC: driver coprocessor not installed windows 8
HI, yesterday I switch my windows system 8, and erase all programs and files, incluind, in fact my PC work perfect but when open the tool Manager, show me the coprocesador does not work because the inst driver installed, given the code 28, the unknow
-
HP deskjet 2542: android app
How to connect to my hp deskjet printer 2542 with my Sony-z2 compact android phone
-
PROBLEM SCANNING HP LASERJET 1005
I INSTALLED A NEW HP LJ 1005. AFTER SCANNING BY COMPUTER, I GET RED LIGHT IN THE SCANNED IMAGE. I DID COMPLAIN TO HP, BUT NOBODY DON'T SE TILLDATE. PLEASE HELP ME TO SOLVE MY PROBLEM.
-
Photosmart 7520 disconnects internet connection
I recently bought a 7520 Photosmart all-in-one which is connected to my home wireless. It works great except for one very annoying thing. If I print something, leave the printer on and walk, when I come back a moment later my Mac has disconnected f