scanned to fill?

Similar Questions

• Photosmart 7515 adds lines from bottom of the scanned image

  My photosmart 7515 started just add a line double about 2 inches from the left edge of all of the scanned images. NO modification of the system that I am aware. Prins computer or internet as usual. Any ideas?

  Hi Bobvan1,

  Welcome to the Forums of HP Support! I see when you scan with your HP Photosmart 7515 he started to add a double line about 2 inches from the left edge.

  I would like that you start here: vertical, lines or streaks in the Copies or Scans, please fill ALL troubleshooting steps, focusing on cleaning.

  Let me know the results, I'll watch for your reply.

  Thank you

• cDAQ 9178 simultaneous independent loops counters?

  I have a cDAQ 9178 wherein I am scanning in various mainly analog channels, but also unique sending digital outputs. These tasks are started during the execution of the program and basically scan continuously, filling variables according to the needs.

  In addition to this, I needed to count impulses and the only way I managed to do that work was to begin the task of counter when necessary, and then stop it. This happens at the same time (within a state machine) and works very well.

  Now, I want to add a second counter, which will take place if necessary (same scenario, task of beginning, read the pulses, work stoppage).

  So in summary, I have to:

  Main outputs and analog loop, digital inputs, tasks began before the great loop and continuously, work stopped only after the termination of the program. (works fine)

  Counter task began when necessary, stopped when necessary, of the main inside while loop. (works fine).

  2nd job counter starts when necessary... (I was wondering if it will work)?

  Should it be a problem?

  Jeff

  Hi Jeff,

  I don't think that you will have problems with that.  To test this, I took an example of the meter and it - create two tasks, each using a counter of the device even duplicated and I has not encountered any errors.  That said, the best way to check for your application would be to add a second straightforward and test it.  As long as it works, there is no problem even if your final configuration can be much more complex.

  Kind regards

  Trey C.

• There are two screens (split screen) showing when the computer is turned on.

  There are two screens (split screen) showing when the computer is turned on. How can I delete one side to return to a view?

  Hi Ikthomas1,

  When did you start in this topic? Were there recent changes to the computer like installing new hardware, software or updates? If it is a recent issue, follow the steps in this document to perform a System Restore. This will restore your comuter up to a point located before the show.

  If you have antivirus software installed, run a scan of filling. You can also use Microsoft Security Essentials to scan your computer.

• file mflmsv.dll (Rundll) could not start and unable to use iTunes.

  Original title: mflmsv.dll (Rundll) file

  When I connect it says that runndll could not start. In my view, it is up to my itunes.  When I went to a ph of windows, I downloaded zune.  I always have my iPod and an iphone and I can't seem to get my itunes to work

  Hello

  Please provide the following details.

  1. You get this error when you turn on your computer?
  2. What is the exact full error message?
  3. What happens when you turn on iTunes on your computer? It gives you an error message when it does not work?

  RunDLL is a legitimate Windows file that runs / loads .dll (Dynamic Link Library) modules, which can also be legitimate or sometimes malicious associated. RunDLL could not start message occurs generally when the .dll file that is configured to run at startup in the registry or as a scheduled task has been deleted. Windows attempts to load this file (s) but cannot locate because the file was most likely removed during an anti-virus or anti-malware analysis.

  I suggest to download AutoRuns and save it to your desktop. You can download it from the link below.

  Autoruns for Windows v11.70

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  1. Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
  2. Open the folder and double-click on autoruns.exe to run. Right-click and select run as administrator.
  3. Please be patient as it scans and fills the entries.
  4. When you are finished scanning, it will say loan to the downstairs and the list of all entries on the all tab.
  5. In the main menu, click file > find and type the name of the file (backgroundcontainer.dll) related to the error message, and then click Next.
  6. Alternatively, you can scroll through the list and find any writing about backgroundcontainer.dll and them.
  7. If found, right click on the entry, then select Remove.
  8. Out Autoruns and restart your computer when it is done.

  For the problem with iTunes, I suggest you to follow the steps below and check if it helps.

  iTunes for Windows Vista, Windows 7 or Windows 8: unexpected Fix closes or launch questions

  http://support.Apple.com/kb/ts1717

  Write us with the details asked, we will help you.

• Get the message that backgrounndcontainer.dll is not found on start up

  After the start and go to the desktop, I get a notice, it says - there was a problem starting C:\Users\Jim\AppData\locale\conduit\BackgroundContainer\BackgroundContainer.dll. The module is not found, I have checked the Task Scheduler Library and didn't find all of the led elements. I downloaded Malwarebytes anti-malware program (which did find some elements of conduits and removed) and still get the notice. I use windows 8.  What I've read, it's because of a Conduit toolbar that installed on my computer when downloading a program. Anyone else has any suggestions to solve this problem?

  Success! I found this elsewhere on the Internet and I worked!

  To resolve this problem, download AutoRuns and save it to your desktop.

  • Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
  • Open the folder and double-click on autoruns.exe to run.
  • Vista/Windows 7/8 users right-click and select run as administrator.
  • Please be patient as it scans and fills the entries.
  • When you are finished scanning, it will say loan to the downstairs and the list of all entries on the all tab.
  • In the main menu, click file > find and type the name of the file (backgroundcontainer.dll) related to the error message, and then click Next.
  • Alternatively, you can scroll through the list and find any writing about backgroundcontainer.dll and them.
  • If found, right click on the entry, then select Remove.
  • Out Autoruns and restart your computer when it is done.

• Create table as select statement (ETG) takes a long time.

  Hi all
  
  One of my procedure launched a table create as select statement each month.
  Usually it ends in 20 minutes. for 6172063 records and 1 hour in 13699067.
  But this time it never even takes to 38076 records.
  When I checked everything he does is the CPU usage. No e/s.
  I did a count (*) using the query, it has brought very good results.
  BUT guard going on DEC.
  I use Oracle 10.2.0.4.
  temp_ip of the main table has 38076
  table nhs_opcs_hier has 26769 records.
  and table nhs_icd10_hier 49551 records.
  -------------------
  Query is:
  create the table analytic_hes.temp_ip_hier as
  Select b.*, (select nvl (max (hierarchy), 0))
  of ref_hd.nhs_opcs_hier one
  where fiscal_year = b.hd_spell_fiscal_year
  and a.code in
  (primary_PROCEDURE, secondary_procedure_1, secondary_procedure_2,
  secondary_procedure_3, secondary_procedure_4, secondary_procedure_5,
  secondary_procedure_6, secondary_procedure_7, secondary_procedure_8,
  secondary_procedure_9, secondary_procedure_10,
  secondary_procedure_11, secondary_procedure_12)) as hd_procedure_hierarchy,
  (select nvl (max (hierarchy), 0) for ref_hd.nhs_icd10_hier one)
  where fiscal_year = b.hd_spell_fiscal_year
  and a.code in
  (primary_diagnosis, secondary_diagnosis_1,
  secondary_diagnosis_2, secondary_diagnosis_3,
  secondary_diagnosis_4, secondary_diagnosis_5,
  secondary_diagnosis_6, secondary_diagnosis_7,
  secondary_diagnosis_8, secondary_diagnosis_9,
  secondary_diagnosis_10, secondary_diagnosis_11,
  secondary_diagnosis_12, secondary_diagnosis_13,
  secondary_diagnosis_14)) as hd_diagnosis_hierarchy
  of analytic_hes.temp_ip b
  -----------------
  
  Any help would be greatly appreciated

  Hello

  It is a bit of a wild card, I think because it will require 14 scans to fill the table temp_ip to unpivot codes diagnostic and procedure, so this lilkely things are moving slower than the original. However, as it is a temporary table, I guess you could have some control over its structure, or at least be able to dismiss it and try something else. If you are able to change the structure of this table, you could make the application much simpler and probably much faster. I think that you need a list of codes of procedure for the year and a list of diagnosis for fiscal codes. I do this through the large list of UNION all THE INSTRUCTIONS, but you can have a more efficient way to do according to the base tables you are people temp_ip of. In any case, it's here (as far as I can tell this will do the same job)

  WITH codes AS
  (   SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          primary_PROCEDURE       procedure_code,
          primary_diagnosis       diagnosis_code,
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_1    procedure_code,
          secondary_diagnosis_1    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_2    procedure_code ,
          secondary_diagnosis_2    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_3    procedure_code,
          secondary_diagnosis_3    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_4    procedure_code,
          secondary_diagnosis_4    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_5    procedure_code,
          secondary_diagnosis_5    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_6    procedure_code,
          secondary_diagnosis_6    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_7    procedure_code,
          secondary_diagnosis_7    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_8    procedure_code,
          secondary_diagnosis_8    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_9    procedure_code,
          secondary_diagnosis_9    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_10  procedure_code,
          secondary_diagnosis_10    diagnosis_code
      FROM
          temp_ip
      UNION ALL
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_11  procedure_code,
          secondary_diagnosis_11    diagnosis_code
      FROM
          temp_ip
      SELECT
          bd.primary_key_column_s,
          hd_spell_fiscal_year,
          secondary_procedure_12  procedure_code,
          secondary_diagnosis_12    diagnosis_code
      FROM
          temp_ip
  ), hd_procedure_hierarchy AS
  (   SELECT
          NVL (MAX (a.hierarchy), 0) hd_procedure_hierarchy,
          a.fiscal_year
      FROM
          ref_hd.nhs_opcs_hier a,
          codes pc
      WHERE
          a.fiscal_year = pc.hd_spell_fiscal_year
      AND
          a.code = pc.procedure_code
      GROUP BY
          a.fiscal_year
  ),hd_diagnosis_hierarchy AS
  (   SELECT
          NVL (MAX (a.hierarchy), 0) hd_diagnosis_hierarchy,
          a.fiscal_year
      FROM
          ref_hd.nhs_icd10_hier a,
          codes pc
      WHERE
          a.fiscal_year = pc.hd_spell_fiscal_year
      AND
          a.code = pc.diagnosis_code
      GROUP BY
          a.fiscal_year
  )
  SELECT b.*, a.hd_procedure_hierarchy, c.hd_diagnosis_hierarchy
    FROM analytic_hes.temp_ip b,
         LEFT OUTER JOIN hd_procedure_hierarchy a
            ON (a.fiscal_year = b.hd_spell_fiscal_year)
         LEFT OUTER JOIN hd_diagnosis_hierarchy c
            ON (c.fiscal_year = b.hd_spell_fiscal_year)
  

  HTH

  David

• I have a form downloaded, and when I try to fill the spaces I can't. The form is scanned by HP printer. I think it's the pdf form. How to fill in the blanks?

  I scanned a form and when I open it with Microsoft Works word processor processor, I can't fill in the information. It scanned on a HP printer scanner and it appears as a tiff document, but I can't complete the informatim.

  Hello

  TIFF format means "Tagged Image File Format" you can not change or fill in the text in this format. I suggest you download the. PDF form once again and then fill out the form and save it and then parse the file to TIFF.

  Alternatively, you can try to convert the file to TIFF to word. I suggest you to search Tiff converter for word online and try to convert.

  With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  Hope this helps,

• How do I scan a document, fill in the empty fields and print the completed document?

  original title: download and information documents.

  My writing becomes very poor due to age.  How do I scan a document, fill in the empty fields and print the completed document?  What other software do I need to do?

  Hi Stuuser,

  I suggest that you use any third party editing program or Microsoft word document to edit any document, and then follow the links below for more information about scanning and printing.

   

  Add or remove a scanner

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-scanner

  Scan a document or file

  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-document-or-file

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/scanning-frequently-asked-questions

  Print a document or file

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-document-or-file

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• With windows XP I could scan a photo and click on an icon so he can fill the page - can I do with windows 7?

  With windows XP I could scan a photo and click on an icon so he can fill the page - can I do with windows 7?

  The game, 27 Sep 2012 22:57:18 + 0000, AdaRocchi wrote:

  With windows XP I could scan a photo and click on an icon so he can fill the page - can I do with windows 7?

  This has to do with what software you use for scanning, and not with
  a version of Windows or another.

  Ken Blake, Microsoft MVP

• How to fill in the blanks on the forms I scanned on my computer

  Is there a program of mild wear I can get so I can fill out forms scanned thatI virgins in my * address email is removed from the privacy *.

  Nope.

  General practice is to complete the form before you scan your computer.

  After scanning the image of the form, it becomes an image file, and there is nothing you can do about it, unless of course you consider adding the text manually using an image/photo editor part 3.

• Fill in scanned PDF files?

  I scanned a document with my Canon MG5120 and then converted to PDF, but can't fill the opening. Would not be considered as the creator of the form, and therefore entitled to make a form to fill out? There are no parameters in the Canon, scanning application regarding making a form to fill out - only security settings. Is it possible to convert the document to a form to fill in the player itself?  (Drive X, version 10.1.1)

  No, except if the application that creates the PDF file automatically add interactive form fields, there is nothing you can do with the drive to make it complete. Acrobat is normally the application that is used to add form fields to a document, but there are free programs like Open Office and Scribus that allows to create PDF forms as well.

• Is it possible to scan a part od the fabric and use it as fill color?

  Hello

  I'm new to illustrator, and I hope that someone could help me.  I scanned a piece of cloth in photoshop and now I want to use to create an Illustrator swatch for I can use as a fill color.  Any ideas? Thank you.

  Given that you are unable to make a pattern from the bitmap objects:

  • Put your digitized form on top of your fabric place
  • Select both
  • Object > clipping mask > make

  Or tracing allows you to make your vector of scanned object, but this model of repetition without seams between tiles of would be very difficult. Much more easily, you could do something repetitive bitmap in photoshop.

• Image of scanned pdf in Illustrator (Live tracing, colors, and fill styles)

  Hello

  I'm a newbie in the forum. Never my first post. I have a specific question that needs your opinion. I scanned a picture of black and white sketch I bring Illustrator. The problem after direct tracing.

  After live trace, I need to fill it with a certain color (which I find the absence in the color chart).

  I have to update these sketches in an Indesign brochure that already has the original imported Illustrator designs (made by someone else). If the original drawing files Illustrator imported have a knowledgeable and special chalk impression (style).

  So the problem is that I don't know how to fill in the contours of the live sketches drawn with a color, then the tool in the chalk as style to it.

  I need help badly... I hit a bad road block.

  Thank you.

  In InDesign when you place your .ai file check the Options to Import Show box in the file selection window. Another window opens after the file selection window, Transparent background is checked.

  Also confirm that there is not a white shape in the bottom of your .ai file. If you click Ctrl + Y in .ai, you can view the real vectors.