SCB-68 and PCI-8331 which is to convert my analog sgnal in digital % 3F
Long ago, about 7 years ago I worked on a project in which I photodetector interface to my computer through the SCB-68. All of the SCB-68 has been connected to the computer using the card PCI-8331.
Now my entry is an analog signal of photodetector but the programming interface, I was getting numerical values for the calculation. Now my confusion about the task of conversion performed by what part of this connection?
SCB - 68 has convert the input signal and the provision of digital output? or PCI-8331 was scanning before delivering information to the computer? or labview was after getting the signal of PCI-8331?
can anyone clear me please?
Thank you!
Of course there was a DAQ card somewhere.
Tags: NI Hardware
Similar Questions
-
I have a PCI-8331 and you have misplaced the software that came with it. When I try to search for drivers, etc. on the site OR get nice things like
There was an error in AJAX request.
Download VISA proves to be unavailable, etc.
I can not even find a page showing the material, but may be out of production already.
Can someone tell me the goods?
Thank you.
John
Hi John,.
The PXI - 8331 PCI, which allows the control of your PXI chassis from the computer you're using? If so, here is a link to the product page. That you are using the device for? If it is the control of your PXI chassis, then you probably need PXI Platform Services.
-
HP Pavilion g4: HP has no Audion and PCI device driver
My phone has no audio. Need a driver for the device in PCI and PCI Simple Communications Controller. Can someone help me? Thank you very much...
My laptop is HP Pavilion g4 and Im using OS 64-bit of Windows 8.
You are the very welcome.
Here are links to the drivers you need...
Audio. Install and reboot the PC.
This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.
File name: sp59649.exe
PCI device:
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp58518.exe
PCI Simple Communications controller:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp58516.exe
-
Wireless, lan usb and pci is not installed
Hi, I just bought a new g001sx 15 HP and installed Windows 7 Professional 64 bit. After you install the operating system of my lan wireless, LAN, USB and PCI devices is not installed, I don't know what to do. installing drivers atheros already tried and it didn't work. I have already inserted an image that shows that some of my drivers are not detected. Thanks in advance.
Hello:
Here are links to the drivers you need...
First install the amd chipset drivers and reboot. You want the first file on the Web page.
This will install the smbus and usb 3 controllers.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Then, install the beta amd radeon catalyst graphics driver.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...
Ethernet controller: DL and install the 2nd driver on the list.
PCI device: DL and install driver 1st on the list.
In order to provide me with the wireless driver which you are interested, please do the following...
Go to Device Manager and click on the network controller needing drivers.
Then click on the Details tab at the top of the control of the network window.
Now, you see a drop-down list of property and it is set by default to the Description of the unit.
Drop down on it and select the second item in the list (Hardware ID).
After the first string of characters that start with PCI\VEN.
-
Problems with the Ethernet controller and PCI Satellite L30-10 X device driver
HelloW!
Sorry for my bad English, I'm from the Russia.
A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...
Hello
Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!
You must choose this number in the form of driver download for XP compatible drivers.
I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.
I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.
Good luck
-
Bridge ACER 486 PCI and PCI to ISA
I have this problem with my computer .i sorts unstall window 7 .but I can't. I got this message...
The following problems prevent Windows to proceed with the upgrade. Cancel the upgrade, complete each task and restart the upgrade pour continue. - Windows must be restarted so that the necessary changes to system files can be carried out before continuing.
The upgrade of Windows will affect the following programs or devices: These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.- System devices: bridge ACER 486 PCI and PCI to ISA
Hello
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
http://support.Microsoft.com/common/international.aspx
Hope this information helps.
-
Can I put an Equim A110-233 with a 64-bit processor and if so which?
Hello
can I put an equim a110-233 with a 64-bit processor, and if so which are compatible.
Thank you
DarrellHello
Update CPU is always a difficult history.
I think you have a good chance to upgrade the processor as long as you use the CPU of the same CPU family.You could check what processors have been used in other portable Satellite Equium A110 and then you could choose the most powerful CPU used in this series.
In addition, you should check your chipset type. On page Intel you can find details and which processors are supported by this chipset.
-
HP15-ac042tu: Ethernet controller and PCI Simple controller drivers required
Installed the Ethernet and PCI Simple Communications Controller controller a certain number of times, but the error message in the device rest Manager again. Could someone please help me with the correct links for drivers for my laptop HP15-ac042tu.
Hello:
I'm glad you have the ethernet driver.
You need the driver for the wireless card that your laptop is.
You will also need this bluetooth driver...
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149898_1
-
HP DC7700p PCI SIMPLE COMMUNICATIONS CONTROLLER AND PCI SERIAL PORT
Hello
I have a HP DC7700p Office for work that is missing, PCI SIMPLE COMMUNICATIONS CONTROLLER AND PCI SERIAL PORT DRIVERS for WINDOWS XP PRO MISSING. CAN SOMEONE HELP ME TO DOWNLOAD THE DRIVERS. I ' M RUNNING WINDOWS XP PRO ON THIS MACHINE.
THANKS IN ADVANCE
SERIAL PORT PCI: PCI VEN_8086 & DEV_2997 & SUBSYS_2801103C & REV_02\3 & B1BFB68 & 0 & 1 B
PCI SIMPLE COMMUNICATIONS CONTROLLER: PCI VEN_8086 & DEV_2994 & SUBSYS_2801103C & REV_02\3 & B1BFB68 & 0 & 18
Hello:
Need the driver of the amt for devices...
-
dc7800mt: dc7800 10 Windows 64 b PCI Simple Communications and PCI Serial Port drivers missing
Can't seem to find the drivers for a dc7800 upgraded to Windows 10 64 b for PCI Simple Communications Controller and PCI Serial Port devices. Any help would be greatly appreciated. Paul_Tikkanen, are you still there?
Hello:
Yes, I'm still here, and Yes, I know what drivers you need...
You need this for the PCI of Simple Communications controller:
This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.
FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46137.exe
PCI serial port:
This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.
FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46134.exe
And let me give you a bonus tip... Install the audio driver Soundmax ADI W7.
I found that works much better than W10 installed.
You install it, then select multistreaming in adi Control Panel, restart again and go to manage audio devices in the Control Panel, and then select the PC speakers, but of course install the W7 audio driver is optional, and it is up to you...
-
Photon counting using Photon unique cash Module and PCI-6602
Hi all
I am currently working on program couting of photons using a single (Excelitas) and PCI-6602 photon counting module connected to the BNC-2121.
I took a glance at other positions, but I still couldn't solve my problem (or, again, I'm not sure if yes or no, the problem is the specification of the material).
In the program, I'm generates a trigger to 1 MHz pulse using a trigger in a separate loop.
Other than that, I have loops of the producer-consumer model to get data and do a simple subtraction to calculate the number of photons in 1 microsecond.
According to the values connected to 'Input.BufSize' of buffer DAQmx and "Samples per channel" DAQmx calendar, I could change the loop number that the program has done its job correctly.
With the values, the program acquires photon 1 MHz with signls for 139 times.
After that, the program stops and the loopback number increases very quickly.
When I forcifully took stop the program, while the loop number increases very quickly, the program appears "error-200141".»
The error that says "data has been replaced before it can be read by the system." Mechanism of data transfer is interrupted, try to use DMA or USB in bulk. Otherwise, divide the input signal before taking the action. "even if the meter explicitly works in DMA mode by using the sample clock.
I wonder there is nothing that can solve my problem or even the only solution will buy a better Board of counters/timers.
Thank you all for reading this.
I will be very happy with any index
Kind regards
Myeongsu
Yes, the same thing happens on my system.
It does not happen with PCIe-6612.
I found more strange things:
When I start to reduce the frequency at a time given (800kHz) can fill the buffer, it will not start since the beginning of the buffer. He can go to the beginning of the buffer only at 100 kHz for my PC.
Options to fix:
(1) PCIe-6612. Seems to work. I tried streaming at 10 MHz, 5 min - fine.
(2) reduce the frequency of the pulse. If your laser supports 100 kHz, you're fine.
(3) put in place additional synchronous counter at 100 kHz. Basically, it's material average number of photons by 10 pulses.
(4) read 2 adjacent pulses each 1/50 kHz - then your data transfer will be 100 kHz and you will get the number of photons of this impulse of the 20 - th.
Programming issues:
(1) remove the display of the received picture, make only the processing of data and show results if you really need it.
(2) clock.vi sample sets the buffer size, if you specify the size of the buffer, do this after this vi.
(3) I deleted unnecessary "loop generation." He is running on the hardware and stops when you stop it - after reading the loop ends.
-
Serial port PCI and PCI Simple Communications Controller
Hello!
My computer OS is Windows 8.1.
I just shearch something and I found that... I don't have serial Port PCI and PCI Simple Communications Controller. (Unintalled)
Serial port PCI-> VEN_8086 & DEV_29B7 & SUBSYS_2819103C & REV_02\3 & 21436425 & 0 & 1 b
Controller PCI Simple Communications-> VEN_8086 & DEV_29B4 & SUBSYS_2819103C & REV_02\3 & 21436425 & 0 & 18
Sorry for my English. But can anyone help me?, where I can download these files.
Hello:
Here are links to the drivers you need...
Install PCI Simple controller Comms
Install PCI Serial Port:
-
CAN I USE PXI-8330 WITH PCI-8331
CAN I USE PXI-8330 (CHASSIS) WITH PCI-8331 (PC)?
CAN I USE PXI-8331 (CHASSIS) WITH PCI-8330 (PC)?
CAN I USE OR PXI-8110 (CHASSIS) WITH PCI-8330 (PC)?
IS CONTROLLER MUST BE THE SAME MODEL?
Hello
MXI controllers have a pair use, as you can see the manual on page 1-4.
http://www.NI.com/PDF/manuals/370840b.PDF
OR PXI-8110 is a PXI controller, so it's a computer doesn´t need to be connected to a PC using a card-MXI.
Kind regards
Abel
OR Brazil
-
Looking for a driver for a HP 250 G3 laptop
Device PCI and PCI Simple Communications controller drivers
OS: Windows 7 Home Premium (64-bit)
Impossible IM find thank you for giving the link.
Thanks in advance
Hello:
When the G3 250 support site returns to the top...
You need these drivers for devices...
Realtek card reader driver (under the section storage drivers)
Driver Intel Management Engine Interface (under section chipset)
-
lack of pci bus 2 and PCI/VEN_10EC & DEV_5209 & SUBSYS_3577 103C & REV. Can someone please help me and tell me how to find these drivers downloaded to my pc. ID enjoy really enjoy it and thanks in advance...
Hello
It's the card reader. Please try first for Windows:
Kind regards.
Maybe you are looking for
-
Configuration of updates - in perpetual loop
Hi, I am trying to turn on my laptop, but keeps it shut itself down and restart with the message: "Configuration of updates. "3 of 3 0% complete"Then it stops again and goes back to this message. I'm desperate to get a file on my laptop, but this doe
-
Qosmio X 500-too small text in the program
Hi, I downloaded McAfee internet security on my Qosmio X 500 11.-g.The program works without any problems however, the elements are too small to read in the program. How can I make it bigger? I did the screen display to 150% but still no way.
-
Recently, I was going through the process of obtaining ImageMagick with the (sudo port install ImageMagick). I installed and like Xcode 3.2.6. Then I installed MacPorts 2.3.4 10.6 Snow Leopard. Then I opened the terminal. The connection has shown. I
-
I have a dell laptop running XP and when automatic update download: KB911895 it keeps failing. What must I do to solve this problem? My screensaver is done by this problem. I did a restore of the system several times, but the problem persists. I also
-
Is it possible to fix the corrupt save in Fable III?
I've almost finished the game but then the black screen and the game crashed. I restarted my computer, but don't turn on the game until the next day. So, everything is fine until I get the message that my backup is corrupt. What can I do?