Scheduling jobs in an application

Similar Questions

• Where can I find scheduled jobs (reports) in the database?

  Hello everyone,
  
  I am almost nine using Oracle Application Server, so excuse me for asking stupid questions, please.
  But where can I find scheduled jobs (reports) in the database?
  
  We use the OAS in version 10.1.2.3.0
  
  Thank you
  
  Florian

  Florian Schmidt wrote:
  So I hope that the jobs are heard in a database table, where I can remove scheduled jobs/reports.

  By default no. But you can activate the API Reports Server queue PL/SQL
  There should be a script in the folder of OH / reports / / admin/sql server called rw_server.sql
  It will create table and package. After that, you must edit the .conf file and remove the tag "jobStatusRepository".

  For more information look at the note [ID 72531.1]

• Allowing a scheduler job

  Hello
  
  I have a 10.2.0.1 development database in a windows environment. I did a scheduler job that runs every minute. Since it is a dev server, our developer tried to simulate a scenario that changes the date of server at a later date. Now, the last run of my regular job (as queried from dba_scheduler_jobs) was a date in the future and when the date of server has been reduced to the current date, work has ceased to run.
  
  How will allow labour to run again? According to the dba_scheduler_jobs, it is always enabled.
  
  Published by: Tim B. 10 July 2012 01:48

  Try:

  BEGIN
     dbms_scheduler.disable( '' );
     dbms_scheduler.set_attribute( name => '', attribute => 'repeat_interval', value => 'FREQ=MINUTELY;INTERVAL=1');
     dbms_scheduler.enable( '' );
  END;
  

• How to schedule the job run from applications of the ADF?

  Hi all

  I want to schedule the job to run every day I need to check some data on the table and send a notification,

  I know that I can do this in a database, but I need to do application-level, is there something in the logic of the web can allow me to do?

  Thank you

  I think you can refer to the

  http://Biemond.blogspot.com/2009/09/job-scheduling-in-WebLogic.html

  https://blogs.Oracle.com/jamesbayer/entry/a_simple_job_scheduler_example

• DBMS Scheduler Job will run but did not finish.

  Hello!

  I created a job that is supposed to run a stored procedure. It works ok but it looks like no it's over... How do I know? My procedure records each action and after execution of the task, I see only one line of paper. One from the code...

  It is the stored procedure code:

  create or replace
  PROCEDURE get_survey_data
  AS
     dir_name         VARCHAR2(100);
     nip_no           VARCHAR2 (1024);
     employee_name    VARCHAR2 (1024);
     company_name     VARCHAR2 (1024);
     hire_date        VARCHAR2 (1024);
     agreement_date   VARCHAR2 (1024);
     stmnt_1          VARCHAR2 (5000);
     stmnt_2          VARCHAR2 (5000);
     t_check          NUMBER;
     s_id             NUMBER;
     ecode            NUMBER;
     emesg            VARCHAR2 (200);
  BEGIN
     DIR_NAME := 'F:\SURVEY_FILES\IN';
     --pobranie ID z sekwencji
     SELECT adecco_apex.survey_job_seq.NEXTVAL
       INTO s_id
       FROM DUAL;
  
  
     INSERT INTO adecco_apex.survey_job_log
                 (ID, start_date, description
                 )
          VALUES (s_id, SYSTIMESTAMP, 'Rozpoczynam Survey JOB'
                 );
                 COMMIT;
  
  
     --SPRAWDZENIE CZY ISTNIEJE TABELA
     SELECT COUNT (*)
       INTO t_check
       FROM all_tables
      WHERE owner = 'ADECCO_APEX' and table_name = 'EXT_IN_INVOICE';
  
  
     IF t_check > 0
     THEN
        EXECUTE IMMEDIATE 'DROP TABLE ADECCO_APEX.EXT_IN_INVOICE';
     END IF;
  
  
     --
     stmnt_1 :=
        'CREATE TABLE ADECCO_APEX.EXT_IN_INVOICE(R NUMBER,FIELD_NAME   VARCHAR2(255 BYTE),FIELD_VALUE  VARCHAR2(255 BYTE)) ORGANIZATION EXTERNAL(  TYPE ORACLE_LOADER DEFAULT DIRECTORY SURVEY_IN ACCESS PARAMETERS ( RECORDS DELIMITED BY NEWLINE CHARACTERSET EE8MSWIN1250 STRING SIZES ARE IN BYTES NOBADFILE NODISCARDFILE NOLOGFILE FIELDS TERMINATED BY '';'' OPTIONALLY ENCLOSED BY ''"'' AND ''"'' NOTRIM MISSING FIELD VALUES ARE NULL ( "R" RECNUM, "FIELD_NAME" CHAR, "FIELD_VALUE" CHAR )) LOCATION (SURVEY_IN:''';
     stmnt_2 := ''')) REJECT LIMIT UNLIMITED NOPARALLEL NOMONITORING';
  
  
     --sprawdzenie czy sa jakies pliki
     SELECT COUNT (*)
       INTO t_check
       FROM (SELECT SUBSTR (ret_val,
                            LENGTH (UPPER (dir_name)) + 2,
                            LENGTH (ret_val)
                           ) file_name
               FROM TABLE (SYS.ls_directory (UPPER (dir_name)))
              WHERE UPPER (ret_val) LIKE '%.CSV'
                AND ret_val NOT LIKE '%OUT_SURVEY.CSV');
  
  
     IF t_check > 1
     THEN
        INSERT INTO adecco_apex.survey_job_log
                    (ID, start_date,
                     description
                    )
             VALUES (s_id, SYSTIMESTAMP,
                     'Rozpoczynam petle po plikach .csv z folderu IN'
                    );
                    COMMIT;
  
  
        FOR i IN (SELECT SUBSTR (ret_val,
                                 LENGTH (UPPER (dir_name)) + 2,
                                 LENGTH (ret_val)
                                ) file_name
                    FROM TABLE (SYS.ls_directory (UPPER (dir_name)))
                   WHERE UPPER (ret_val) LIKE '%.CSV'
                     AND ret_val NOT LIKE '%OUT_SURVEY.CSV')
        LOOP
           --DBMS_OUTPUT.ENABLE ();
  
  
           --DBMS_OUTPUT.PUT_LINE(stmnt_1 || i.file_name || stmnt_2);
           BEGIN
              EXECUTE IMMEDIATE stmnt_1 || i.file_name || stmnt_2;
           EXCEPTION
              WHEN OTHERS
              THEN
                 INSERT INTO adecco_apex.survey_job_log
                             (ID, start_date,
                              description
                             )
                      VALUES (s_id, SYSTIMESTAMP,
                                 'Blad podczas tworzenia tabeli: '
                              || ecode
                              || '-'
                              || emesg
                             );
  
  
                 COMMIT;
           END;
  
  
           INSERT INTO adecco_apex.survey_job_log
                       (ID, start_date, description
                       )
                VALUES (s_id, SYSTIMESTAMP, 'Czytam plik: ' || i.file_name
                       );
                       COMMIT;
  
  
           EXECUTE IMMEDIATE 'SELECT FIELD_VALUE FROM ADECCO_APEX.EXT_IN_INVOICE WHERE R = 2'
                        INTO company_name;
  
  
           EXECUTE IMMEDIATE 'SELECT FIELD_VALUE FROM ADECCO_APEX.EXT_IN_INVOICE WHERE R = 6'
                        INTO nip_no;
  
  
           EXECUTE IMMEDIATE 'SELECT FIELD_VALUE FROM ADECCO_APEX.EXT_IN_INVOICE WHERE R = 9'
                        INTO employee_name;
  
  
           EXECUTE IMMEDIATE 'SELECT FIELD_VALUE FROM ADECCO_APEX.EXT_IN_INVOICE WHERE R = 11'
                        INTO hire_date;
  
  
           EXECUTE IMMEDIATE 'SELECT FIELD_VALUE FROM ADECCO_APEX.EXT_IN_INVOICE WHERE R = 12'
                        INTO agreement_date;
  
  
           --DBMS_OUTPUT.PUT_LINE(to_date(hire_Date,'YYYY-MM-DD'));
           --DBMS_OUTPUT.PUT_LINE(to_date(agreement_Date,'YYYY-MM-DD'));
           EXECUTE IMMEDIATE 'TRUNCATE TABLE ADECCO_APEX.STG_SURVEY';
  
  
           BEGIN
              INSERT INTO adecco_apex.stg_survey
                          (nip, employee_name, company_name, hire_date,
                           agreement_date
                          )
                   VALUES (nip_no, employee_name, company_name, hire_date,
                           agreement_date
                          );
                          COMMIT;
           EXCEPTION
              WHEN OTHERS
              THEN
                 INSERT INTO adecco_apex.survey_job_log
                             (ID, start_date,
                              description
                             )
                      VALUES (s_id, SYSTIMESTAMP,
                                 'Blad podczas dodawania wierszy do tabeli STG: '
                              || ecode
                              || '-'
                              || emesg
                             );
  
  
                 COMMIT;
           END;
  
  
           BEGIN
              MERGE INTO adecco_apex.survey a
                 USING (SELECT nip, employee_name, company_name, hire_date,
                               agreement_date
                          FROM adecco_apex.stg_survey) b
                 ON (a.nip = b.nip AND a.employee_name = b.employee_name)
                 WHEN MATCHED THEN
                    UPDATE
                       SET a.hire_date = b.hire_date,
                           a.agreement_date = b.agreement_date
                 WHEN NOT MATCHED THEN
                    INSERT (nip, employee_name, company_name, hire_date,
                            agreement_date)
                    VALUES (TO_NUMBER (b.nip), b.employee_name, b.company_name,
                            TO_DATE (b.hire_date, 'YYYY-MM-DD'),
                            TO_DATE (b.agreement_date, 'YYYY-MM-DD'));
                            COMMIT;
           EXCEPTION
              WHEN OTHERS
              THEN
                 INSERT INTO adecco_apex.survey_job_log
                             (ID, start_date,
                              description
                             )
                      VALUES (s_id, SYSTIMESTAMP,
                                 'Blad podczas merge do tabeli docelowej: '
                              || ecode
                              || '-'
                              || emesg
                             );
  
  
                 COMMIT;
           END;
  
  
           EXECUTE IMMEDIATE 'DROP TABLE ADECCO_APEX.EXT_IN_INVOICE';
  
  
           --Wygenerowanie pliku wynikowego
           INSERT INTO adecco_apex.survey_job_log
                       (ID, start_date,
                        description
                       )
                VALUES (s_id, SYSTIMESTAMP,
                        'Generuje plik wynikowy OUT_SURVEY.CSV'
                       );
                       COMMIT;
  
  
           BEGIN
              adecco_apex.dump_table_to_csv ('ADECCO_APEX.SURVEY',
                                 'SURVEY_OUT',
                                 'OUT_SURVEY.CSV'
                                );
           EXCEPTION
              WHEN OTHERS
              THEN
                 INSERT INTO adecco_apex.survey_job_log
                             (ID, start_date,
                              description
                             )
                      VALUES (s_id, SYSTIMESTAMP,
                                 'Blad podczas generowania pliku OUT: '
                              || ecode
                              || '-'
                              || emesg
                             );
                             COMMIT;
           END;
  
  
           INSERT INTO adecco_apex.survey_job_log
                       (ID, start_date, description
                       )
                VALUES (s_id, SYSTIMESTAMP, 'Zamykam plik: ' || i.file_name
                       );
                       COMMIT;
            utl_file.fremove('SURVEY_IN', i.file_name);
        END LOOP;
     ELSE
        INSERT INTO adecco_apex.survey_job_log
                    (ID, start_date, description
                    )
             VALUES (s_id, SYSTIMESTAMP, 'Brak plikow .CSV w folderze IN'
                    );
                    COMMIT;
     END IF;
  
  
     INSERT INTO adecco_apex.survey_job_log
                 (ID, start_date, description
                 )
          VALUES (s_id, SYSTIMESTAMP, 'Koncze Survey JOB'
                 );
                 COMMIT;
  END;
  

  What can be wrong?

  Help gurus!

  Kind regards

  PsmakR

  Hello!

  This stored procedure runs fine when Im running it but the thing is that DBMS Scheduler starts the application and then I do not know... So basically I do not understand how the profile can help me in this case?

  With respect,

  PSmakR

• A scheduler job get hung up causing critical problems

  Hi Experts,

  We are on Oracle 11.2.0.2 on Linux. We have some work that is programmed to operate during the night as 1 am etc. These jobs copy data from some of the main tables in the archive tables that are in the same OLTP schema. We use the PARALLEL suspicion in this copy sqls. Now most of the time work ends somewhere between 1-2 minutes. But yesterday, the work has been suspended for more than 5 hours. It caused failure because the tables got locked and we have stopped the work manually to resolve the failure. This questions happened twice so far - once in a less critical environment and once in production. Today, the same work done in 20 seconds. This could be due to a bug in the Scheduler?

  
  I will be grateful for your contributions.

  OrauserN

  CWA will not help with the lock, but it will show you what other processes were going on this time. Perhaps one of them was slow or block your trade. Verification of the AWR report if you see anyhting that was not supposed to work or is unusually long.

  Unfortunately, if you do not have a logging process in the procedure called by your job Scheduler, it will be difficult to get more information about the problem.

• Notification of Scheduler job broken - but the work seems to work?

  Hello

  I hope you can help me, because I'm stuck with this problem:

  I have a DBMS_SCHEDULER - work that is scheduled for 06:00 every day. When I choose to DBA_SCHEDULER_JOBS, I see the State is "expected", failure_count is 0, is 1/max_failures, raise_events are "JOB_BROKEN, JOB_STOPPED, JOB_DISABLED.

  There is a notification for this task triggered by JOB_BROKEN, JOB_STOPPED, and JOB_DISABLED events.

  Now, every day, I get a notification like this:

  Job: SYSZSK. JOB_DELETE_ZSK_PROTOKOLL

  Event: JOB_BROKEN

  Date: January 7, 14 06.00.00.046633 AM + 02:00 the journal id: 69808
  Job class: JCL_FBI_NV Run count: count 1 default: count 1 Retry: 0 error code: 0 Error Message:

  BUT:

  -J' I can´t find a line in DBA_SCHEDULER_JOB_LOG with LOG_ID = 69808

  -I find a journal for work:

  LOG_ID: 282810

  LOG_DATE: 7 JANUARY 2014 05:00:01, 033737 + 01:00

  OWNER: SYSZSK

  JOB_NAME: JOB_DELETE_ZSK_PROTOKOLL

  OPERATION: RUN

  STATUS: SUCCESSFUL

  Can you give me a tip what going on here? Any help much appreciated...

  Best regards

  Gerd

  you might be looking at the wrong database.

• Control scheduled jobs?

  I have a script to schedule the recompose 14 pools view (view 5), the script works fine, I can connect to view manager and see the jobs that have been scheduled (in the "Tasks" tab for each pool).

  Is there a scripted way to view these tasks, possibly to cancel or postpone their?

  I'm having a hard time getting information from scheduled task in the opinion.

  The calendar is kept in the composer and as far as I know, there is currently no cmdlets seen to manipulate this scheduler or scheduled in it jobs.

• Who should schedule jobs via DBMS_SCHEDULER; User sys or Apps?

  Oracle version: 11.2.0.3 on RHEL 5.4
  
  We must plan a few stored procedures running in an applications using DBMS_SCHEDULER schema.
  This would be held by user Sys or Apps? If its user Apps I need to grant execute privilege on DBMS_SCHEDULER to the apps user and I would like to know if it is a good practice?

  Yes, you must use the apps account with run on DBMS_SCHEDULER.

  SYS cannot be used if it is absolutely required - for example uses SYS calls that are not available on other accounts of database.

  Hemant K Collette

• Scheduler jobs external 11g XE

  Hi all
  
  I tried for a while get external tasks to work on 11g XE with no luck.
  
  I tried a number of resources:
  < li > [url https://forums.oracle.com/forums/thread.jspa?threadID=555102] thread: Guide to the external work on with dbms_scheduler 10g for example scripts, batch files (Note: 11g XE are $OH/rdbms/admin/externaljob.ora or $OH/bin/jssu). Alors_que I can create some externaljob.ora, I have no idea on the jssu)
  < li > [tip of libpam libpam.so.0] The url
  
  To make it as broad as possible, assume I did the following:
  < li > installed OEL 5.6 64
  < li > yum install oracle-validated
  < li > rpm - ivh oracle-xe - 11.2.0 - 1.0.x86_64.rpm
  /etc/init.d/Oracle-XE < li > configure (accept all default settings)
  
  The code I want to run (swung oracle-www.m-base.org/Sounds.html of SqlPlus [URL http://www.oracle-base.com/articles/11g/SchedulerEnhancements_11gR1.php]):

  CONN / AS SYSDBA
  BEGIN
    -- Basic credential.
    DBMS_SCHEDULER.create_credential(
      credential_name => 'LOCALCREDENTIAL',
      username        => 'oracle',
      password        => 'oracle');
  END;
  /
  
  BEGIN
    DBMS_SCHEDULER.create_job(
      job_name             => 'local_unix_command_job',
      job_type             => 'EXECUTABLE',
      number_of_arguments  => 1,
      job_action           => '/bin/ls',
      auto_drop            => FALSE,
      enabled              => FALSE);
  
    DBMS_SCHEDULER.set_job_argument_value('local_unix_command_job',1,'/tmp'); -- assuming you have a /tmp
  
    DBMS_SCHEDULER.set_attribute('local_unix_command_job', 'credential_name', 'LOCALCREDENTIAL');
    DBMS_SCHEDULER.enable('local_unix_command_job');
  END;
  /
  
  SELECT *
  FROM (SELECT *
          FROM user_scheduler_job_run_details
         WHERE job_name = 'LOCAL_UNIX_COMMAND_JOB'
      ORDER BY log_id DESC)
  WHERE ROWNUM = 1    
  /
  
  BEGIN
     DBMS_SCHEDULER.drop_job('local_unix_command_job');
  END;   
  /

  The result:

  EXTERNAL_LOG_ID="job_20044_240",
  ORA-27370: job slave failed to launch a job of type EXECUTABLE
  ORA-27300: OS system dependent operation:accessing login executable failed with status: 2
  ORA-27301: OS failure message: No such file or directory
  ORA-27302: failure occurred at: sjseccel 1

  What should I do to get the famous status = success for labour?
  
  Kind regards
  Håvard

  I can confirm the issue on the victory platform, after trying your testcase (slightly modified) with an external local labour.

  I've traced the activity file and jssu.exe is 'missing '. After copying an another exe like jssu.exe the status of the job goes to "successful."

  To get an output stdout (job__stdout), I had to manually add the Planner/journal/folders in the path $OH.

• Scheduler jobs package javadocs

  Hello
  
  I try to use the com.thortech.xl.scheduler.tasks javadoc package. I thought that it would be under documentation directory in the path of the xlclient installation program.
  
  Unfortunately it does not appear.
  
  If anyone can tell me where I can find this javadoc?
  
  We use the 9i IOM.
  
  Thank you

  There is no such thing as the javadoc. I suggest that you look through a program of java developer like eclipse or jdeveloper.

  -Kevin

• Question on schedule jobs

  Hello
  I created two varients of employment as described belo.
  
  1)
  
  DECLARE
  X NUMBER;
  BEGIN
  SYS. DBMS_JOB. Send
  (work = > X - name of task as 'X')
  , this = > 'DEL_EMPLOYEE_TABLE;' - STI has STORED PROCEDURE
  , next_date = > to_date (May 19, 2009 01:00 ',' dd/mm/yyyy hh24:mi:ss')
  , interval = > ' trunc (sysdate) + 1/24 1'.
  , no_parse = > TRUE
  );
  SYS. DBMS_OUTPUT. Put_line (' job number is: ' | to_char (x));
  END;
  
  2)
  
  Start
  () dbms_scheduler.create_job
  job_name = > 'DEL_EMPLOYEE_TABLE ',.
  job_type = > 'procedure_stockee ',.
  job_action = > 'DEL_EMPLOYEE_TABLE ',.
  number_of_arguments = > 0,
  start_date = > SYSTIMESTAMP,
  repeat_interval = > ' FREQ = DAILY; BYHOUR = 0; BYMINUTE = 0; BYSECOND = 0',
  End_date = > NULL,
  enabled = > TRUE,
  Comments = > 'Old records EMPLOYΙ delete');
  end;
  
  
  I have the following questions
  
  (1) what is the difference between #1 and #2
  (2) when I questioned the DB with this query, I could see only
  
  Select the owner, job_name, State of dba_scheduler_jobs
  
  I saw only
  
  "DEL_EMPLOYEE_TABLE" - employment but do not see the work #1 sub - X

  SQL> DECLARE
    2    X NUMBER;
    3  BEGIN
    4    SYS.DBMS_JOB.SUBMIT
    5      ( job       => X
    6       ,what      => 'DEL_EMPLOYEE_TABLE;'
    7        ,next_date => to_date('19/05/2009 01:00:00','dd/mm/yyyy hh24:mi:ss')
    8        ,interval  => 'trunc(sysdate) + 1/24 + 1'
    9        ,no_parse  => TRUE
   10       );
   11     SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
   12   END;
   13   /
  Job Number is: 46
  
  PL/SQL procedure successfully completed.
  
  SQL> exec dbms_job.remove(46)
  
  PL/SQL procedure successfully completed.
  
  SQL> select job, what from user_jobs;
  
  no rows selected
  

  Max
  http://oracleitalia.WordPress.com

• HOW TO REMOVE SCHEDULED.JOBS

  Hello.
  I have 4 simple questions.
  
  1. how to show all the names of procedures
  
  2. how to display all the name of scheduled tasks.
  
  3. how to remove all scheduled tasks
  
  4. how to remove a task planned with the specific name.
  
  Thanks in advance
  concerning
  Sajid

  Hello

  1.

  SELECT *
    FROM all_procedures;
  

  2.

  SELECT * FROM ALL_SCHEDULER_JOBS;   
  
  SELECT * FROM ALL_SCHEDULER_PROGRAMS;
  

  3. (but I wouldn't do that)

  BEGIN
     FOR rec IN (SELECT job_name
                   FROM user_scheduler_jobs)
     LOOP
        dbms_scheduler.drop_job(rec.job_name);
     END LOOP;
  END;
  

  4.

  DBMS_SCHEDULER.DROP_JOB;
  

  In general, if you need a Dictionary view, but don't know what's her name, query the dictionary itself, example;

  SELECT *
    FROM DICTIONARY
   WHERE table_name LIKE '%SCHEDU%';
  

  Concerning
  Peter

  Concerning
  Peter

• Oracle does not try to run the scheduled job

  Hi experts,
  
  We have a scheduled task that runs a procedure every 15 minutes... the procedure is written so that it retrieve data in a cursor in the remote location and insert it into a table server...
  
  It was working fine, but at 6:00 in the morning the link is disconnected from the remote site (as it it connected through lease line and RF) then oracle has not tried to perform the work, and when I see tasks it shows that work always running from 06:00 morning...
  
  I have check all views, dba_jobs, dba_scheduler_jobs, but in no view or a table, it is shown broken... anyway now I recreated and it works well.
  
  but I would like to know how to force oracle to re-run performance if it is not run on a specified due to connection failure? I read in the documentation of oracle running oracle work try if it is not performed after 1 min, 2 min, 4 min and so on for 16 times, then declare it as broken...
  
  and I also saw column "retry schedule" in dba_scheduler_jobs...
  
  Can someone tell me how to plan this new attempt explicitly?
  
  Thanks and greetings
  VD

  Vikrant,

  Not going to publish a solution, but would advice to take your question to the forum of the annex. I'm sure someone would be able to give the answer.
  Planner

  Aman...

• OIM11g: Error executing AD reconciliation Schedule Job

  Hi all
  
  I use OIM 11 g BP05 and have deployed the AD 11.1.1.5.0 connector using the connector server. When executing the reconciliation Group/organization/user AD plan work, I am getting error in the newspapers of the connector below:
  
  08/11/2012-16:25:59 < ERROR >: class ActiveDirectoryUtils method-->--> GetDirectoryEntry, Message-> Exception stack Trace: at System.DirectoryServices.DirectoryEntry.Bind (Boolean throwIfFail)
  at System.DirectoryServices.DirectoryEntry.Bind)
  at System.DirectoryServices.DirectoryEntry.get_NativeObject)
  at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryUtils.GetDirectoryEntry (String path, ActiveDirectoryConfiguration configuration) in 1423 c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryUtils.cs:line
  08/11/2012-16:25:59 < ERROR >: class method-> ActiveDirectoryConnector-> ExecuteQuery, Message-> Caught Exception: failed to get the directory entry08/11/2012-16:25:59 < ERROR >: class method-> ActiveDirectoryConnector-> ExecuteQuery, Message-> Trace stack: at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryUtils.GetDirectoryEntry (String path, ActiveDirectoryConfiguration configuration) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryUtils.cs:line 1456
  to Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector.ExecuteQuery (ObjectClass oclass, string query, Manager of ResultsHandler, OperationOptions options, Boolean ReadOnly, SortOption sortOption, String serverName, String searchRoot, searchScope, OperationOptions otherOptions SearchScope) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryConnector.cs:line 1048
  to Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector.ExecuteQuery (ObjectClass oclass, query string, Manager of ResultsHandler, OperationOptions options) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryConnector.cs:line 814
  ConnectorServer.exe error: 0: Org.IdentityConnectors.Framework.Common.Exceptions.ConnectorException: could not get the directory entry
  
  Also, I see this error in the log too:
  
  * 08/11/2012-16:25:59 < ERROR >: class ActiveDirectoryUtils method-->--> GetDirectoryEntry, Message-> Exception occurred while creating the effraction.* directory
  * 08/11/2012-16:25:59 < ERROR >: class ActiveDirectoryUtils method-->--> GetDirectoryEntry, Message-> Message of Exception: invalid dn syntax has been specified.*
  08/11/2012-16:25:59 < ERROR >: class ActiveDirectoryUtils method-->--> GetDirectoryEntry, Message-> Exception stack Trace: at System.DirectoryServices.DirectoryEntry.Bind (Boolean throwIfFail)
  at System.DirectoryServices.DirectoryEntry.Bind)
  at System.DirectoryServices.DirectoryEntry.get_NativeObject)
  at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryUtils.GetDirectoryEntry (String path, ActiveDirectoryConfiguration configuration) in
  
  Pointers to solve this problem?
  
  Kind regards
  Sunny
  
  Published by: ajmerasunny on November 8, 2012 16:32

  Hi all

  My bad, I gave the wrong research base. Problem solved.

  However, I need only run a recon reliable source for asset
  Users. I have given filter as useraccountcontrol = 512 but had casting exception.
  Guidance on how to specify the filter to get only active accounts of the AD?

  Kind regards
  Sunny