A scheduler job get hung up causing critical problems

Similar Questions

• Why RH 9 project get hung up in trial version?

  Hi all

  I use RoboHelp 9 HTML and Internet Explorer 7 without any problems. However, our Department is upgraded to IE 8 soon and asked that I have test its compatibility with a trial version of RH 9 (on another machine). When I opened my project in the trial version, I lived hang ups and had to shut down several times due to a status of "not responding". I had problems when updating related Word documents and view main page layout. When I started a project "in white", the response time was very fast and everything was more smooth. I don't know if this is related to IE 8 or not. Any thoughts on why he should get hung up on my existing project?

  Thank you!

  Hello

  Where the existing project is located? If you say that it is on a network drive, which is probably the cause. But if it is on a local drive C, chances are that something else is coming. Source code control is involved?

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• slow down the loading of pages on the internet. get hung up

  While on the internet pages are slow to load. This isn't a new problem. It's been like that since.

  There are several possible causes of problems with browsing the web. Here are some simple steps that may solve the problem or that show the way to a solution.

  Please backup all data before making any changes.

  1. reboot your router as your device at wide band, if they are separated.

  2. If you connect on the router with a WiFi connection, disable Wi - Fi on again.

  3. If you connect with Wi - Fi, and you can also connect with the Ethernet, do and turn off Wi - Fi.

  4. take the measures recommended in this support article.

  5. If the download button (with the icon with an arrow pointing down) is displayed in the toolbar, click, and then in the box that appears. Download history is deleted.

  6. in the Security tab of the Preferences window, uncheck the box marked

  Warn when visiting a fraudulent website

  If it is checked.

  7. If you are on OS X 10.10 or later, select the Search tab uncheck the box marked

  Search for quick activation Web site

  If it is checked.

  8. If you're running OS X 10.9 or later, select the Advanced tab and uncheck the box marked

  Stop the plug-ins to save energy

  Quit and restart the browser.

  9. Select the Security tab and uncheck the box marked

  Enable WebGL

  If it is checked. If it is unchecked, check it out.

  10. If you're running OS X 10.10 or later, open the general pane in system preferences and uncheck the box marked

  Allow the transfer between the Mac and your iCloud devices

  If it is checked.

  11 select connections comments* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest.

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create an account to test and delete it, including his home folder, after testing.

  12. all other web browsers installed, and they are the same? What other Internet applications, such as iTunes and the App Store?

  13. If other browsers and Internet applications are also affected, follow these instructions and test.

  14 open the iCloud preferences window and uncheck the boxes marked in Safari and pictures, that if they are checked.

  15. are there other devices on the same network that can browse the Web, and if so, are they affected?

  16. If you can, test Safari on another network.

  17. If you know that you have modified the hosts file to block access to some servers, undo this change.

  18 start in recovery mode. In the OS X Utilities screen, select get online help. It will launch a clean copy of Safari. Some plugins, such as Flash, will be available. While in recovery, you do not have access to your saved bookmarks or passwords, so take note of those who before, if they are required for the test.

  After testing, restart as usual.

• How can I prevent the shutdown task scheduler engine, get the new display detected to work and avoid receiving the message "Internet Explorer has encountered a problem and stop"? __

  My laptop is a Dell Inspiron 1520, running Windows Vista Home Edition Premium and Internet Explorer 9.  My extra monitor is a Sharp Aquos LED HD - TV, the model LC-46LE700UN.  I've been using a VGA cable to me onnecter the laptop and TV.

  The laptop seems to operate normally when not connect to the TV.

  As soon as the VGA cable is connected to the laptop (without being connected to the TV), the following message appears:

  'Microsoft Windows - Task Scheduler engine has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is found. »

  When initially, I connected the laptop to TV, "new display detected" was automatically acti EV.  Soon, it was activated is no longer automatically.  I was able to activate manually using Windows Mobility Center during automatic activation failed initially but now Windows Mobility Center no longer detects the new view.

  Using Fn + F8, I can view the image on the laptop or TV, but not both simultaneously.

  The message "Internet Explorer has encountered a problem and stop" appears intermittently, but I can still make internet sites and show the content after the message.

  I have download software, myp2p.eu, a site for watching TV programs "streaming", including PPStream, Sopcast, Live, Stream Torrent Sina, a Swarm, TVAnts, UUSee, VGO and Veetle player and canceled downloads for PPL (who failed an integrity check), PPMate (corrupted) and (blocked) TVKoo.

  Norton Security quarantined the installer of UUSee, indicating that it was a high risk of program with many users.

  To a computer repair shop and using a different additional display flat screen, I could not duplicate the problems yesterday (4 October 2010), when the "new detected display" has been activated automatically, and I could see the photo or the other and both screens.

  I tried to restore the system to a date (on the list) before when the problems occurred first - failure of the restoration of the system.  I tried to use scandisk, but received no indication that he had performed and corrected all errors found after restarting Windows.  I looked at responses from forum, the display setting and the new display detected support literature.

  How can I avoid these problems?  Help!

  Hello

  Restoring the system end up with any error message?

  This could also happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To troubleshoot error messages and other issues,
  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Steps-
  1 log on to the computer using an account with administrator rights
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services.
  If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  See this article-
  http://support.Microsoft.com/kb/929135

  This should solve your problem.

  -Robert

• When I open the Task Scheduler, I get a message error «an error has occurred for task realupgradelogontasks...» »

  When I open the Task Scheduler, I get the following error message:

  an error has occurred for the realupgradelogontasks-1-5-21-2172834406-3963835389-1001 task. error message: the specified account name is not valid. What this means and how do I get rid of the error message?

  Windows 7 Home Edition Premium does not the local security policy. I didn't know that you have the version of the operating system.

  However, the error you get for realupgradelogontasks is RealPlayer. You can uninstall RealPlayer and reinstall to see if that will remove from TaskScheduler option to update.

  If this isn't the case, then check with RealPlayer for the taking in charge of this issue.

  Thank you

  Marilyn

• Outline editor is get hung up when I add a member in the sketch

  Hello
  Outline editor is get hung up when I add a member in the sketch in 11.1.2.2. It's new facility 11.1.2.2 and it occurs only during editing stroke. I am able to perform the update variable substitution, calc scripts.
  
  As soon as I add a member and press ENTER, the schema editor freezes with the circle of progress. I am not able to verify, to save or close.
  
  Can you please let me know if I had to install a patch for it or someone has encountered this problem in 11.1.2.2.

  Yes the Java 7 is not supported.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Acrobat 11 Pro Installer get hung up when he made "to"install script blocks... »

  I have a 2008 15 "Unibody Macbook Pro with replaceable battery life of five hours.  It has 8 GS of RAM and it is initialized under Mountain Lion.  The Acrobat Pro 11 Installer get hung up when it gets to "install script blocks...". "It never ends installation.  I tried after starting in safe mode and then start Mode once again used to start the mode.  I have had no success.  The Acrobat Pro 11 installer works fine when it is installed on my Mac Pro 2007 32-bit office, started under Leo.  I have to try something fancy with the command line, using the Terminal application?  I'm puzzled.

  Greetings, Rave and Sabian.

  I solved the problem installing Acrobat Pro 11 without reformatting the internal hard drive of my Macbook Pro.  I reinstalled Mountain Lion on top of the existing installation of Mountain Lion.

  I have reinstalled Lion on my ' 07 32 bit Mac Pro, a month ago, and it is resolved many issues.  So, re-install on top existing Cougar Mountain Lion facility was the difficulty of obtaining the Acrobat Pro 11 install to complete and eliminate also some other system bugs I had.

  After using Acrobat Pro 11 on my Mac Pro, for more than a week, I must say that it is a huge improvement on Acrobat 9 Pro.  I like to have the tools and commenting on the tabs above to the right of the window and using the top menu much less.  It scrolls PDF pages and comments two separate activities, which allows the refresh of the screen to be much faster and better.

  Acrobat Pro 11 is a great version!

• Allowing a scheduler job

  Hello
  
  I have a 10.2.0.1 development database in a windows environment. I did a scheduler job that runs every minute. Since it is a dev server, our developer tried to simulate a scenario that changes the date of server at a later date. Now, the last run of my regular job (as queried from dba_scheduler_jobs) was a date in the future and when the date of server has been reduced to the current date, work has ceased to run.
  
  How will allow labour to run again? According to the dba_scheduler_jobs, it is always enabled.
  
  Published by: Tim B. 10 July 2012 01:48

  Try:

  BEGIN
     dbms_scheduler.disable( '' );
     dbms_scheduler.set_attribute( name => '', attribute => 'repeat_interval', value => 'FREQ=MINUTELY;INTERVAL=1');
     dbms_scheduler.enable( '' );
  END;
  

• Where can I find scheduled jobs (reports) in the database?

  Hello everyone,
  
  I am almost nine using Oracle Application Server, so excuse me for asking stupid questions, please.
  But where can I find scheduled jobs (reports) in the database?
  
  We use the OAS in version 10.1.2.3.0
  
  Thank you
  
  Florian

  Florian Schmidt wrote:
  So I hope that the jobs are heard in a database table, where I can remove scheduled jobs/reports.

  By default no. But you can activate the API Reports Server queue PL/SQL
  There should be a script in the folder of OH / reports / / admin/sql server called rw_server.sql
  It will create table and package. After that, you must edit the .conf file and remove the tag "jobStatusRepository".

  For more information look at the note [ID 72531.1]

• PSE getting hung up on the opening screen?

  My PSE 8.0 begins to open, but gets hung up on the "building of the TWAIN menu items" is part of the blue screen. I did a force close and restarted my computer. No change. So I uninstalled and reinstalled the software, but it will not always clear the checkpoint!

  I'm on date limit & start a minor freak out...!

  If you do not use a scanner; change the file name Twain can help.

  http://kb2.Adobe.com/CPS/408/kb408850.html

• Windows has encountered a critical problem and will restart automatically in a minute. Please save your work not

  Original title: I have Windows Vista home basic. Whenever I try to connect to the internet I get the error "Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now' and the computer restarts

  This started happening a few days ago. I tried to run the software anti-virus and 3 different registry cleaners and nothing helped. I use a mobile internet USB and when I tried to run safe mode with networking of the device was not recognized.

  Does anyone have an idea on how I can fix this?

  This is the Win32/Trojan.Shutdowner virus and rootkit causes this error. I think that it is the solution: download and burn the ISO image of kav rescue ofhttp://rescuedisk.kaspersky-labs.com/rescuedisk/updatable/kav_rescue_10.isoon CD. Make a start of full system scan from the disc that you created. Remove infections all found, including this stupid annoying rootkit, and you're done! At least it worked for me!

• Mid-project CS3 to CS5 upgrade cause major problems - please help!

  Hi all

  Despite having been a user since version 6.0, I've never used the forums so I'm new here.

  I have major dillemas following a big update at a critical time and feel completely abandoned by Adobe on this.

  I worked on a major project for more than a year.  Recently, the project requirements has become too expensive for my dual core Pentium running Premiere CS3.  CS3 has never been a program too stable during projects to get to a certain size, but this time frequent accidents were doing impossible things.  Furthermore, when I tried the functions of project management to consolidate and save my work, they would fail ("unknown error"), leaving my precious work extremely vulnerable.

  I contacted Adobe to inquire if I could build a new system first CS5 running and my project to import to CS3 to continue my work (which is now late with the customer).  The wizard of support said yes, there was complete backward compatibility.  You know what's coming...!

  I bought the new system (Pentium i7 860 8 GB of RAM, 1gig Graphics GTX460, striped disk Western Digital Mybook Firewire 800) and CS5 upgrade and has got it all.  I brought my project in CS5 by using the project import/set function in the menu.  My project appeared and I was hoping that everything was fine.  When I tried to read, the problems have become apparent.  Photos are all fine blue vertical lines from the top down, washed out colors and do not play smoothly.  The main monitor cannot read the timeline - it can only display the first image selected.  After a short period of reading, the whole program seems to go in slow motion. not an accident, but an impractical slows down.  The timeline, then stops responding and cannot be read.  When I first open the program, it takes about 5 minutes to load everything - that can't be right surely?

  Basically, it seems that CS5 is unable to manage my project of CS3 all despite the fact that, although large, it should be relatively easy.  It's a SD PAL widescreen project which is at the stage of rough cut.  I have not yet applied classification or something particularly complex (my system CS3 used to have difficulties handling of projects after that I applied Magic Bulllet looks like).  All sequences are in standard DV AVI format and was shot on a XLH1a.  The project also contains an uncompressed AVI file.

  The main thing is that I have spent a small fortune here all this because the old CS3 software was not working properly and I desperately need to finish this project.  Now the money has gone, CS3 is not stable enough to work on, CS5 on a brand new i7 machine work hardly at all, and my neck is on the line with the customer.  The work is sitting in limbo when I should be plug on with it.

  Sorry if this all sounds a bit (Christmas emotional stress?) but I would lovingly welcome all hero/heroine who can come to my rescue.  I'm so disappointed with Adobe right now.

  Thanks in advance,

  Paul

  The blue vertical lines: for the Nvidia graphics card, it's a quality 3D setting that is causing the problem.  Set the parameter to "let the application decide."

  Untie the uncompressed avi and see how works the rest.

• Why not fix update firefox? It must be refined as it is easier to restore the settings, it caused more problems than he solved

  Refresh caused more problems than he solved Firefox.
  I was shocked at the time where I had to restore my settings of waste.

  I believe it may be possible to write a refresh script that does not get rid of all custom settings and bookmarks.
  

  Sometimes it's the settings or something in the user profile that
  the origin of the problem. The update / reset deletes all.

  Look at your desktop. You see a folder called; Old Firefox?

  https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

  These can not get your data back, but will help in the future.

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences

• Cannot determine or find out whether there are well on my system that may be predefined, causing access problems

  On Windows 2000 Professional SP4 o/s with IE 6, I am trying to locate any firewall, which can be on my system.  So far, I found none. I have not installed some.  I looked for answers on Microsoft.com (re: Windows XP has a built-in built in firewall is not enabled by default), but no information on Win2000Pro presenting one like that. Before the firewall issue, I thought that it may have been a virus or an anti-virus running program, causing a problem.  My pc is virus-free and I'm not now running an anti-virus program.  I have reset temporarily lower than usual security levels, but it was not the cure.  In addition, to exclude from spyware and adware.  Don't have these installed or running.  I'm currently not in a corporate network or home.  It's just a pc.  I can't get the game online, I want to play to load completely.  My Java is up to date and works fine without pop - ads or blockers interfere. (I ran the Java which tests and is ok) The support for the suggested site care service that I am behind a firewall.  How can I know for sure if this is what is happening with my pc?  Is it possible that there is an internet firewall also?  Can I play other games on this site with little or no problem, which suggests that it is a problem on their end? Also, I have run a performance scan, active disk defragmentation, no file corrupted, run Registry clean, run Disk Cleanup of the files of the irrational, ran chkdsk/f during reboot and no problem found, deleted IE temporary file browser and erasing temporary files Java.  In addition, my o/s and IE browser is supported by their system.  So now what?  I am open to suggestions and any help is appreciated.  Thank you.

  Hello Precious1,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  Desktop operating systems	General availability date	Direct OEM and retail license availability (end date)	Availability of the license generator system (end date)
  Windows 2000 Professional	March 31, 2000	March 31, 2004	March 31, 2005

  The pasted list of http://www.microsoft.com/windows/lifecycle/default.mspx>

  I suggest take you computer to a shop for assistance.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.