SCO to Connect downloaded .zip file, not recognized?

Similar Questions

• .zip files not recognized in Windows 7

  When I had problems with Windows 10, I've restored Windows 7 on my HP laptop.  . Zip files are more recognized on my laptop.  Before the upgrade to Windows 10, I had the opportunity to unzip and zip files.    The extension of the .zip files is no more listed in the types of files accessible from the control panel.

  I tried to download WinZip, and it would allow me to compress, but not unzip files.

  Can anyone offer suggestions how to solve this problem?

  Not sure, but take a look on this page - http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html and see the association of ZIP file, that peut help if all goes well.

• I am trying to download zipped files that were sent to me. They download, but when I try to access it, I get a box that says "application not found". Can someone help me?

  I received files in zip format that I downloaded.  However, when I click on the file to open it, I get a box that says "application not found" and I am not able to access the files.

  Can someone help me understand what is happening and why I can't download files more

  Hi Barbara,

  1. is the specific issue confined to zip files?

  2 have you made changes on the computer before this problem?

  3. is there any software zip file that is installed on your computer?

  First of all, I suggest you try to access a different zip file and check if you are able to open. This will help us know if the problem is with the zip file special or the application.

  I suggest you do a right click on the particular file and select extract and check if you are able to access the particular file.

  See the following for more information Microsoft article.

  Compress and uncompress files (zip files)

  Hope that the information provided is useful.

• After you download the camera raw plug, Nikon D800 files not recognized. How can I fix this please?

  I just had a new hard drive in my MacBook Pro and had to reinstall Photoshop CS4. Despite the latest Camera Raw plugin download Photoshop does not recognize my raw files from my Nikon D 800

  That is right. The D800 Nikon NEF RAW requires ACR 6.7 or higher and you must be at least CS5 to use ACR 6.7.  You must download convert DNG 8.6 and create DNG files for NEF files using CS4. Camera Raw plugin | Compatible cameras

• Nikon D5 and NAVE D500 files not "recognized by the raw format support in Lightroom"

  Hello

  I have a Nikon D5 and a D500 and I downloaded and update my Lightroom CC only 2 weeks ago on my MacBook Pro 2015. I just tried to update again, and he said his day. However, when you try to import NEF files in Lightroom the following message is displayed:

  "The files are not recognized by raw format support in Lightroom.

  

  Help, please!

  Kind regards

  Zhayynn James

  Two devices require at least 2015.5 CC in Lightroom.

  Devices supported by Camera Raw

  Please confirm which version of Lightroom you run

  Lightroom > on Lightroom

• R710 IDRAC6 series via ssh: connect com2 returns COMMAND NOT RECOGNIZED

  Hello

  I configured successfully on ssh several times serial console redirection on different dell servers, but now I'm stuck with two R710s.

  The problem

  I can't use the connect command:

  /Admin1-> connect com2
  cmdstat
  status: 2
  status_tag: PROCESSING COMMAND FAILED
  error: 253
  error_tag: COMMAND NOT RECOGNIZED

  Configuration

  Version

  BIOS is 6.1.0, cli version output is:

  /Admin1-> version
  CLP SM Version: 1.0.2
  SM ME treat Version: 1.0.0b

  I have configured the redirection as before:

  BIOS

  Communication series	On with the Console via COM2 Redirection
  Address of the Serial Port	Device1 Serial = COM1, Serial Device2 = COM2
  Connector external series	Remote access equipment
  Failsafe baud rate	115200
  Remote Terminal type	VT100/VT220
  Redirection after boot	People with disabilities

  iDRAC

  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialBaudRate 115200
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialConsoleEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialSshEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialHistorySize 2000
  Value of the object successfully changed

  The command is now console, not connect.

  And that's exactly what is said in the docs - it's just that I had not noticed the change and read 'connect', where 'console' was written.

  A big thanks to Lars Handrick Support Dell Germany for reporting the change of command name for me.

• compressed files not recognized by Windows 7

  I just some of the files compressed into one right click on files by selecting send to... Compressed (zipped) folder. He was a "Compression". "info displays and it seemed that the files were being compressed. However, once the compression has been completed, the displayed icon looks more like a page of paper (not the folder with the zipper) and when I try to open the file, I get a system request to find a program to open this file. Why does my system feel. ZIP files unrecognizable and, more important still, how to solve the problem? I am running Windows 7 Ultimate SP1 and there is no other utility compression installed on this machine.

  Thank you

  John

  Try...

  1. Open the Menu 'start '.
  2. Click on "all programs".
  3. Expand "Accessories".
  4. Right-click "Command Prompt", select "Run as Administrator"
     [If Windows 7 - you will be asked if you are sure that you want to open the administrator command prompt, select Yes.]
  5. From there type:
     cmd /c assoc .zip = CompressedFolder
  6. Press ENTER.
  7. Close the command prompt.
  8. Restart the computer.

  Not better?

• Nikon NEF D810A "files not recognized by management of the raw format" Lightroom 5.7.1

  title says it all, Nikon D810A, NEF files are not recognized, but the NAVE of a D810 files are recognized.  On both devices firmware is 1.01.

  This device requires at least LR 6.1, so it is necessary to upgrade (79 US Dollars or equivalent), or use the free DNG Converter to convert your NEF files to DNG files that can be read by LR5.

• Files not recognized by management of raw in Lightroom

  Last week, I bought a new Canon D 760 and I fired the first shots with it yesterday. I shoot in RAW and JPEG.

  I always edited my previous camera RAW photos in Lightroom 5. I also wanted to do this with the new camera, but still the same error message appears here on: "files are not recognized by the RAW format support in Lightroom.

  I tried to update and it is also successful, but I get this error message.

  
  

  Y at - it a (free) solution for this or am I obliged now to update Lightroom 6?

  I read that I can use a DNG Converter, but I would have preferred to edit RAW files directly.

  My apologies for my bad English, I'm Dutch.

  Hi tineg,.

  The only way to directly edit the RAW images is upgrading to Lightroom 6 as Canon D 760 files are supported in Lightroom 6 and above version.

  Reference Article: cameras supported by Adobe Camera Raw

  Kind regards

  Claes

• VMDK file not recognized as a virtual disk

  Hi all

  I have 2 files VMDK of an old virtual machine that I deleted. I kept only the virtual disks. Now, I created a new virtual machine and tried to add the 2 virtual drives, but they are not recognized as a file vmdk as a 'file' (see screenshot)

  Is it possible to add the 2 virtual drives to the TEWEB02 machine?

  Thx a lot!

  Here's a post of Continuum Re: need to recreate a descriptor from scratch, but still have the *-flat.vmdk?  This is a link to a very nice tool, he wrote for this task very

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth

  VMware communities user moderator

• Export .wav Audition 3.0 session files not recognized by CD burning programs...

  Hello

  I use Audition to create multitrack sessions on my laptop.  Everything works fine, no problems at all... that is, until I export my sessions completed in WAV files.  For some reason, the. WAV files are not recognized as 'valid '. WAV files in programs like EAC, Nero CD, burning etc.

  The laptop that I use is a Dell XPS 1330 running Vista x 64 SP2.

  Now, fortunately, I have a portable backup that is running Windows XP SP2, on which I also installed hearing.  Interestingly, these same. WAV files exported from the hearing on the Vista machine will matter not in any laptop XP of CD burning software.

  So what I have to do now is copy my files of session of the hearing of my new laptop (Vista) during my old laptop (XP).  Once I have it and export the. WAV files from the XP laptop - these files are recognized by my burning software.  Curiously, the software of engraving on BOTH machines recognize the. WAV files exported from the XP machine.

• Now, this indicates to me that there could be a problem with how hearing exports these. WAV files of sessions on a Vista x 64 system.

Is anyone familiar with this problem?  It's a simple configuration setting I can adjust?  Or is this a known bug?

Thanks in advance...

My guess is that you export these 32-bit wavs instead of files audio standard 44.1/16 bit

• RoboHelp 8 - all files not recognized

  I upgraded a RoboHelp 6 to 8 of RoboHelp project. This has worked very well for a while (very slow and many issues of style), but not serious.
  Now, no matter what I try and open RoboHelp tries to open a new project and then I get the following messgae:
  
  The file 'xxxx.htm' is not a project file help recognized and cannot be opened.
  
  This happens to be in the local directory or network.
  
  I moved this project at the local level to try to improve performance, and then this happened.
  Any suggestions?
  
  I tried to remove the .cpd, but then the project opened with all broken links (1000 topics).

  Hi Debbie

  Hmmm, it seems to you that the project is open, huh?

  Maybe try to Reinstall RoboHelp? It seems that something has been wrong somewhere along the way. In addition, of what you have reported you were previously working on a network resource? If so, ouch - is not good - always better to work locally! From what you described, it would almost seem that your RoboHelp project has managed to be created using absolute references to subjects. Which seems strange because normally, RoboHelp creates related things. However, we have seen all sorts of oddities when you work on a network. It's just one of the reasons why we advise against it.

  See you soon... Rick

• music files not recognized on the use of the TV

  I have 1/2 my problem is resolved by changing my opinion 16 GB in MSC mode, it is now recognized as a device of my Samsung TV, but it does not recognize that there are files of music loaded does anyone have suggestions on the machine, I bought the view because it should be compatible (my Zune was not).  I'm not very tech savvy, but I downloaded WMP music in MP3 format (?).  I hope someone can help.  Otherwise so far so good!

  you load your music files in the view when your device is in MSC mode?

  files loaded into the PSG will not be recognized when you use the msc mode...

  (i.e. the TV will try to read files from the view and custom view there files because they were loaded to MTP)

• Re: office jet pro 8600 connect with router but not recognized on the network

  BUT... it did NOT work for me.

  I have the same situation:

  1. I bought and installed e-8600 HP OfficeJet Pro on my Linksys wireless network, while it was usable by anyone with connectivity to my wireless network.  It is installed without problem.

  2. I need to reconfigure and move my Pro e-8600 to my Linksys Wireless to my network routers NETGEAR AC1450 wireless, so I removed the printer and uninstalled all the software Pro e-8600 my laptop ACER running 7/Windows-b4bit.  I have restored the default settings on my Pro e-8600, reconnected to my network NETGEAR Wireless and restarted all power of the State.

  3. when I downloaded the latest driver for the Pro e-8600 to hp.com and tried to reinstall the e-8600 Pro on my NETGEAR network, the installation software couldn't recognize the e-8600 Pro on my NETGEAR network.  During the process, the software recognized the network, but the printer is not found.

  Help!

  Hello-

  Have you checked your router settings?

  Although the wizard detects the printer and you can reach the built-in Web server, the printer is not communicating with the router effectively.

• class.h file not recognized by the compiler signals section

  Hey. My class .h file is pasted below with a screenshot. The signals keyword is cyan, when I think it should be purple. Also when I mouse over the word he said Macro Expansion (protected) (even though the words of Macro are green).

  I don't think that the compiler is grateful signals: article because the signal that he is apparently not defined.

  Appreciate any help,

  Justin.

  /*
   * Count.h
   *
   *  Created on: 23/03/2015
   *      Author: Justin
   */
  
  #ifndef COUNT_H_
  #define COUNT_H_
  
  #include 
  
      class Count : public QObject
      {
          Q_OBJECT
          Q_PROPERTY(int downloadedDataSinceStart READ downloadedData WRITE setDownloadedData NOTIFY downloadChanged)
  
      public:
          Count(QObject* parent = 0);
          virtual ~Count();
  
          int downloadedData();
          void setDownloadedData(int data);
  
      signals:
  
          void downloadChanged();
  
      private:
  
          int m_data; // The data downloaded in Mb
  
      };
  
  #endif /* COUNT_H_ */
  

  Screenshot:

  

  downloadChanged() is a signal and should not be reported as a RPC function, which means that you must delete these lines (sorry for the formatting):
  {} void County: downloadChange()
  //...
  }

  If you want to run code when the downloadChange() signal is displayed, you must connect a machine slot to this signal, run the code in the slot (ie: onDownloadChanged())

  See here for more info about the signals and slots:
  http://developer.BlackBerry.com/native/documentation/Cascades/dev/signals_slots/