Scott
Hi all
I live and work in Australia.
I installed the two ports Cisco SPA112 phone adapter.
I can receive calls but I am unable to make outgoing calls.
I have a dial tone when I pick up the phone but when I dial the phone does not connect.
my ISP is iinet if that makes a difference.
Please help me.
Hi Scott.
Try following this installation guide:
http://whirlpool.NET.au/wiki/iinetphone_ciscospa112
Tags: Cisco Support
Similar Questions
-
When I open my file to load down, either online or offline file freezes the pc and I get this message
C:\DOCUME~1\Scott\LOCALS~1\Temp\8e91_appcompat.txt I have down loaded a fix? and may have gotten a similar message-
Hello scottmc ny,.
What version of Windows XP and service pack are you running? You only an error when you access your download folder or this happens with other folders? If the system works, what do you think might have changed since the last time it did not work properly?
Little matter that you use for malware protection, that
Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/Restart your computer and solve the outstanding issues. -
Original title: my computer guard stop
I have to restart if it has not been used in about an hour or two. When I restart I get this little screen I've ever had before its loading:
C:/users/Scott/appdata/local/FL... / Bribfpmco.DLL. Then he said: the module is not found.
Anyone know what it is?
Thank you
Scott
Hi Scott,.
This problem can occur because of corrupted system files or any what conflict of third-party application.
Please help me with the following information related to this issue:
- What is the brand and model of your computer?
- When exactly your computer shutdown? It's trying to access any document in particular?
I suggest you to check the issue by starting your computer in safe mode. If you experience the issue in safe mode, I suggest you perform the clean boot and check. Follow these steps:
Step 1: I suggest to start the computer in safe mode and check if the problem is still present. Please see the link below to start the computer in safe mode:
Start your computer in safe mode
Step 2:
If the problem does not exist in safe mode, I ask you to perform clean mode and then check the status of the issue. A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.
http://support.Microsoft.com/kb/929135
Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.
Please answer us on the State of the question to help you further.
-
Hello world
My version of DB is
BANNER
--------------------------------------------------------------------------------
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
AMT for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I ran this command SYS and SCOTT as well. But I can't see the body of DBMS_PIPE package. So, how can I test DBMS_PIPE then? Please help, suggest something here.
@C:\app\BS\product\11.2.0\dbhome_1\RDBMS\ADMIN\dbmspipe.sql
Kind regards
BS2012.
Have you had a look at the script of dbmspipe.sql? Why not? After all, it's just an ASCII text file.
In any case the script is EXECUTED on the package to a role, execute_catalog_role. So only users who have gotten this role will be able to use the DBMS_PIPE of the judgment. You must login as SYS and grant EXECUTE to your username (do not grant them this role). Oracle made this way because the pipes can be voracious consumers of system resources.
Oh and drop the package from the SCOTT schema. It's just a recipe for confusion.
Cheers, APC
-
Adobe's Scott Kelby's correct about the feature updates to LR 6?
Just bought my LR 6 update of the Adobe site the other day. Works very well and is more responsive and faster. Very happy with it. I went from LR 5. I do not cloud of Adobe creative use.
I watch podcasts Kelby and his last (#11 I think) he said the subject of Lightroom 6 for people who bought (like me) that Adobe won't ever feature updates of LR 6 for people who bought. These updates to date WON'T be not for those who subscribe to the creative cloud and use LR 6. Kelley said that adobe would release camera profile updates and corrections of bugs - but never to new features.
Adobe or anyone is true. Tell if Adobe adds a brush stroke to LR 6 - only the CC people get it?
Dear Mozart11,
What that told Scott Kelby and what is in fact true sometimes differ or are misinterpreted. Mr. Kelby, I think, tried to tell people that purchase Adobe Photoshop Lightroom 6 as a product independent and may prevent you from using other programs that are part of the Adobe Creative cloud subscription program evolving. Lightroom Mobile, for example, is a feature that never ceases to evolve, but it is not available for those who like you who run only 6 of Lightroom.
What won't you miss not however as a customer of Lightroom 6 are all updates free .dot which become available for your software. New features are rarely introduced free .dot updates even if it happened. (Example: extended files tif support and smoothing of color noise reduction slider.) If you have nothing to fear in terms of functionality of Adobe Photoshop Lightroom. The warning is that Adobe is a big company and that there are people of talent at work in many departments. Limit your purchase to Lightroom 6 only can prevent you from making use of other tools in the arsenal of creative cloud. But of course, you can become a subscriber of creative cloud, at a later date must come something you really want to use.
I hope this helps to clarify this common confusion.
--
David Marx
-
Hi all
I know that oracle 10 g excelent.
but iam new on oracle 12 c
After installtion I tried to connect to sql developer
I tried to make the connection finally I make the connection with local connections automatically generated
connect as a SYSTEM, System-orcl
have alook around the user in all these connections, seems that the PB is CBD
IAM trying to connect to iknow scott and HR, be they APB
After looking so round this way
CREATE TRIGGER open_all_pdbs
AFTER STARTING
WE DATABASE
BEGIN
EXECUTE IMMEDIATE 'alter database connectable to all open. "
END open_all_pdbs;
He created iam trying to connect like this
Orcl-SYS/CONN @pdborcl as sysdba
prombet appears to ask you any name (sys) - other prombet questions on password (orcl) - another poster asking enter tns_admin (don't know what it is) I leav it empty then
error appear as error in line 1 connection faild
I tried another borrowed plsql lane
by writing connect sys@pdborcl as sysdba
ask questions on password and then ora-12154 tns said apperas could not resolve the connect identifier specified
anyone has an idea on borrowed from hr or scott, through sql dev or plsql?
Please do not refer to this link
because it is very useful for mehope someone answer me
Thanks and greetings
anyone has an idea on borrowed from hr or scott, through sql dev or plsql?
Please do not refer to this link https://forums.oracle.com/message/11199727#11199727 because it is very useful for me
hope someone answer me
Why not talk about this link? You said that you wanted to help with your problem and my response to this link explains fully your problem and what to do about it. There also links to two threads and more who have more info on your question.
It is a problem of sql developer, then you should repost it in the sql developer forum.
You can use a BASIC connection of developer sql instead of the TNS connection, you try to use. These links explain how to do this.
-
Grant truncate HR. EMP to SCOTT
Hi all
11.2.0.1
What specific privilege can grant truncate table to a user?
I'm confused:
Connect as SYS:
SQL > grant all on human resources. EMP to SCOTT;
Grant succeeded.
Connect as SCOTT:
SQL > truncate table HR. EMP;
Table truncated.
Connect as SYS:
SQL > revoke all on human resources. SCOTT EMP;
Revoke succeeded.
Connect as SCOTT:
SQL > truncate table HR. EMP;
Table truncated.
Why SCOTT might still truncate the table?
Thank you
I'm going to assume that these are not temporary tables in fact (that is, they are not global temporary tables)
CREATE PROCEDURE table_owner.truncate_table( p_table_name in varchar2 ) AS BEGIN IF( p_table_name IN (<
- >))
THEN
EXECUTE IMMEDIATE 'TRUNCATE TABLE ' || p_table_name;
END IF;
END;
Of course, you can add additional logging logic, or you can allow different users to truncate different tables...
Justin
-
How can I connect to PDB to unlock old patterns such as scott and hr 12 c
Hello
After properly installing the 12 c, how can I connect to PDB to use patterns scott or HR?
By default when I connect as sys or sqlplus system it connects to orcl not to pdborcl.
also how scott connection in sql developer.
Thanks in advance for your advice.
Make sure that your tnsnames.ora file has an entry for your PDB.
Connect as SYS to the ROOT of your BDC$ and open your PDB databases. They are not open by default (you can create a trigger to do this if you want).
Then you can connect as a system to your PDB and unlock users scott and HR.
-
I used REGEXP_REPLACE to remove Scott. is it possible to delete all information on Scott and storage simultaneously using REGEXP_REPLACE...?
Select REGEXP_REPLACE (dbms_metadata.get_ddl('TABLE','EMP'), '("Scott")', ", 1, 0, 'i') twice;
result:
CREATE TABLE 'EMP '.
(SELECT 'EMPNO' NUMBER (4,0) NOT NULL,)
'ENAME' VARCHAR2 (10),
VARCHAR2 (9) "JOB."
"MGR" NUMBER (4,0).
"SAL" NUMBER (7.2).
"DEPTNO" NUMBER (2.0)
) PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255 NOCOMPRESS SLAUGHTER
TABLESPACE 'USERS '.
I want to:
CREATE TABLE 'EMP '.
(SELECT 'EMPNO' NUMBER (4,0) NOT NULL,)
'ENAME' VARCHAR2 (10),
VARCHAR2 (9) "JOB."
"MGR" NUMBER (4,0).
"SAL" NUMBER (7.2).
"DEPTNO" NUMBER (2.0)
)
Hello.
In fact, it's a Japanese forum here.
I'm sorry, English is not good for me...
According to the reference,.
The description of the parameter called SEGMENT_ATTRIBUTES, it is written like this.
> If
TRUE
, include clauses attributes segment in the DDL. IfFALSE
, omit them. Default value isTRUE
.Before you SELECT it, it's OK if you run the following.
exec DBMS_METADATA. SET_TRANSFORM_PARAM (DBMS_METADATA. False SESSION_TRANSFORM, 'SEGMENT_ATTRIBUTES',);
I hope you find it informative.
-
Which granted CREATE a PUBLIC SYNONYM for user SCOTT?
version: 11.2.0.3
Operating system: Solaris 10
Auditing is enabled in our database.
Of DBA_SYS_PRIVS, we have confirmed that one of our DBA colleagues gave some risky privileges like CREATE PUBLIC SYNONYM, SELECT ANY TABLE... etc. to the user SCOTT.SQL> show parameter audit_trail NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ audit_trail string DB
We would like to find out 2 things
1. the SQL GRANT
2. the date and time on which the statetement GRANT was pulled
How can we find it?Y.Ramlet wrote:
version: 11.2.0.3
Operating system: Solaris 10Auditing is enabled in our database.
SQL> show parameter audit_trail NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ audit_trail string DB
Of DBA_SYS_PRIVS, we have confirmed that one of our DBA colleagues gave some risky privileges like CREATE PUBLIC SYNONYM, SELECT ANY TABLE... etc. to the user SCOTT.
We would like to find out 2 things
1. the SQL GRANTYou will have no SQL in the audit trail, because you have not configured the parameter correctly. You must audit_trail = db, extended to get the SQL code.
2. the date and time on which the statetement GRANT was pulled
You will have anything unless you have enabled auditing for the instruction given with
Check create public synonym;How can we find it?
You can't until you configure the audit in an appropriate manner.
-
Setting NLS_LANG for schema scott
Hi all
I have two questions. Please guide me carefully.
1. I want to change the schema of scott NLS_LANG LatinArabic ISO AR8ISO8859P6
2. I want my sga size to 1 GB.
I have Oracle database 10g release 2 installed on windows 7 32-bit.
I need your help.
Kind regards.and it's ji great sharma.
somehow,
I just changed the nls_lang to AMERICAN_AMERICA registry value. AR8MSWIN1256, install the Arabic language on my pc, MY character_set of database is AR8ISO8859P6.and it works.
I am really grateful to all of you.you people only do our job extremely easy. so much thanks to users of the forum.
-
Crop Ratio camera Raw / Scott Kelby Book for Digital Photographers
Of the book by Scot Kelby regarding the use of Camera Raw.
-The Adobe® Photoshop® CS5 Book for Digital Photographers
Chapter 2. WWF Raw: Camera Raw essence > cropping and straightening
If you reopen your picture cropped again in Camera Raw, you'll see the cropped version. To bring the cultural border, simply click on the crop tool. To remove the crop altogether, tap on the Esc or Delete (PC: Backspace) key on your keyboard (or choose clear Crop the pop-up menu of the crop tool). If you want your cropped a photo size exact (such as 8 × 10, 13 × 19″, etc.), choose Custom the pop-up menu of the crop tool to bring up the dialog box you see here. You can choose to crop in inches, pixels or cm.
In this topic, Scott Kelby explains Crop Ratio ACR 7.x
In this version, there is the possibility for the crop Ratio and inches, CM and pixel. With the new version, however this option is no longer available.
I hope that this will sure be some of you time looking for this.
The ACR 8, the crop tool only crops a report now. You can always convert/save off Camera Raw to specific units of measure, but which is now in the Options dialog box of the workflow (the box that appears when you click the text underlined in blue at the bottom of the Camera Raw dialog box). It is usually a good change, especially to be displayed in an environment more or the resolution of the images.
-
Incomplete reference of connection for the scott connection object
Hello
my application works fine in JDev 11.1.2.1 when deployed to integrated WS
at the same time to the stand-alone deployment, I see an error:
Incomplete reference of connection for the scott connection object
Houston-26061 something wrong with JDBC
the connection that Scott is defined as a data source
where can be a problem?John is right. Configure the jdbc data source in wls and reference him module of your application configuration.
If you look at the example of my blog and check the configuration, you will see that I have to refer to as "jdbc/DDH" jdbc data source My WLS I put in place since a data source with exactly this pointing to the BD JNDI name I want.Timo
-
Scott,
Broadcast on the Web today, you mentioned a kb on AMD RVI article - where is this article?
Thank you!
I know the question is for a specific person but I know that you are looking for the firepower on the AMD chips and found this - http://www.vmware.com/pdf/RVI_performance.pdf if you have not already seen it.
Kyle
-
Hello
I gave sysdba privilege to scott as below...
grant sysdba to scott;
but the following query does not when I run with the user scott. error "ora - 00942:table is not output.
SELECT master
directory_name,
DIRECTORY_PATH
OF dba_directories;
SELECT d.directory_name,
p.Grantee,
p.Privilege
Dba_directories d,
dba_tab_privs p
WHERE d.directory_name = p.table_name
ORDER
BY directory_name.
beneficiary,
privilege;
Please tell me where I'm wrong sysdba privileges to scott user m...The SYSDBA (and SYSOPER) are special administrative privileges that allow an administrator to perform basic database administration tasks, such as the creation of the database and start the instance and judgment.
By the granting of these privileges, the user does not automatically receive access to data dictionary views. I think it's what you expected.
You must SELECT privilege to interview these views of data dictionary:
dba_directories
dba_tab_privConnect as SYS and to do this:
grant select on dba_directories, dba_tab_priv to scott
In addition, you grant select_catalog_role GOLD select any dictionary to your user of your choice.
SELECT_CATALOG_ROLE role allows you to select the views of catalog (% s/n, v$ %...). If you can grant this role to your user of your choice.
privilege select any dictionary allows allows you to select tables dictionary which is tables sys.
You cannot select tables sys with only select_catalog_role role.
Maybe you are looking for
-
a separate album multi disc set
I can't for the life of me, see why a created disc multi disc shows separately for the album. This is the Portrait of Dan Fogelberg, 4 CD set. I did read the information and changed the orinal separated from 4 albums at all with the same name. Delete
-
Satellite Pro P200-15W: drivers ATI Mobility HD2600 & game bugs
Hellofirst of all, please, I beg you, forgive my English, I use a translator message from Ati: + "" Please contact AMD customer care for ATI products service! + + The only version that you can use your card is one that is available to the manufacture
-
Hi everyone, thank you for your time. I recorded in a file of data like this: name address telephone e-mail, etc. Each field is separated by a tab (\t) delimiter. I have read each line of the file with the text file reading and read audit function li
-
Hi, we are using the Labwindows/CVI 8.5, the BNC2090, the NIPCIe-6259. Currently, we find a way to control the analog output voltage as tension - that's our goal now, and you can help me how to communicate with the main program. "" Also, yesterday, w
-
Color LaserJet CM6040f MFP paper Curl
Hi all I just bought a second hand Color LaserJet CM6040f MFP and it work like a charm. The only thing is he wraps the paper into 5-6 "big waves" on the long side of the paper. Is there a way to improve this? Is it something with the drum? I tried al