Screen hinge screws missing next to power button to Aspire 1830-3595

Similar Questions

• Black screen after restarting mode "hibernate", green power button is turned on.

  Anyone had a problem in the past to have a black screen?

  Have had a Sony Vaio VPCF11JFX/B for 2 years now and noticed this problem 3 days ago.

  Whenever the laptop might restart out of hibernation it would show me only a black screen and light green power.

  Had unplugged it and took out the battery with now the off button for up to 1 minute, but it's still doing the same thing.

  Don't know how to troubleshoot it.

  Many would like to advice helful.

  Hi Ameli,

  First of all, download and install the utility to update the BIOS from here: http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCF11JFXB&upd_id=5818&os_group_id=6

  Then, download and install the updated video driver here: http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCF11JFXB&upd_id=5577&os_group_id=6

  Then, perform a restore of the system to an earlier time when it worked very well: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813

  Then, perform a full system recovery to restore your computer to factory settings. Restart the computer, keep pressing the F10 key continuously, press on enter key at the start of editing option, Recovery Wizard, select start and click on ignore VAIO Care rescue (if you do not want to back up data) to start the system recovery process.

  Note: You can perform system recovery if you are using the same operating system installed at the factory. It is necessary to backup all data before performing the system recovery as it erases everything from the computer.

  If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/p/service.pl

  Note: If my post answered your question, please mark it as an "accepted Solution".

• SVJ202A11L screen stay black even after Holding Power button for 15 seconds and then restart

  Need to know why the stay of LCD in black and windows 8 did not come to the top.  But the mouse is alive and can be moved.

  Hi chioulienh,

  It could be windows start in question.  Please go through the following steps to solve the problem.  If this isn't the case, then try to boot in safe mode.  Then using restore windows systems restore to a date on which he was working.  If still does not boot to windows, you contact Sony support at 888-476-6972 for support.  Or can put the unit in a State factory.  Put the new State of the factory will be delete or delete all data and files.  Make sure that data backup before you go as long as the plant.

  Nick-

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• Satellite A100 - screen power button stays black!

  Hi all

  I have a Satellite A100 (PSAANA-04E005) than just doesn t power up. The power button lights up, but the screen remains black, and you can hear things from fan.

  I tried to remove the battery and running only one AC, tried the recovery disk and everything I could find on troubleshooting, but it s just not work.
  More disappointing is I JUST realized out of warranty - timing is far from perfect...

  Can someone please help with some info so I can get my system back up and running?
  Not too concerned about what was on the hard drive - just that it works again!

  Any help would be greatly appreciated...

  See you soon,.
  L

  Hello

  I put t know if this will help, but in my case it worked in the past.
  -Remove the battery and unplug the AC adapter
  -wait for about 30-40 min, also try a longer period
  -then reconnect the two parts to the laptop and try to turn on the machine

  If it helps then you are already lucky, if not well: (.) You will need to contact the ASP guy in your country for assistance

  Good luck

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• HP 2009 m, black screen, power button / stop lights

  I have a HP 2009 Mr. Windows Vista 64-bit. 4 years.

  I can turn my computer on fine, check e-mail, watch videos, etc. but then the screen will be black. The blue button lights. If I turn off and on. It will work for like 5-10 min or more, then it will be a black screen.  If I watch a video when it goes to a black screen, I can still hear play.  I hear a slight hum coming from the screen that I never heard before that happened.  Is it my desktop computer or do I need a new monitor?

  Hi NSCY,

  The fastest way to isolate the problem to the screen would be, if possible, be: try the monitor on another PC or another monitor to the computer.

  Check your graphics card and the power of the connections on the PC and the monitor also.

  Your graphics card may also cause this problem.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.
  
  Want Phoenix 810-150se, Intel i7 4820 k
  16 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.
  
  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.
  
  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• Power button in the start Windows 8.1 screen

  When I go to the Windows Start Menu 8.1 I have all of the options of closing down, sleep etc.  I have a laptop, I expected this option to be there.  Can someone explain how to recover?

  Things I've tried:

  I searched all the parameters that I can find, but if you know where it is I would be very grateful to hear it!

  I used a change in the registry tutorial that was supposed to solve the problem found here - http://winsupersite.com/windows-8/windows-81-update-1-tip-toggle-power-button

  Hey D_E_Manton,

  I don't think that this feature is something that has been disabled by HP.

  You have the latest updates for your system? Windows 8.1 does not initially include the functions of power on the start screen. These were added later with an update and is the most likely solution to your problem.

  In addition, as a temporary work around you could do what I did in Windows 8 for my PC at home. Create a shortcut in "c:\ProgramData\Microsoft\Windows\Start Menu" to sleep, stop, or restart. As long as you create shortcuts in the correct path to the file, they should be viewable on your screen, allowing you to pin them there. You can change the icons of shortcuts to display the corresponding images using this path of the file as you choose the icons: %SystemRoot%\system32\SHELL32.dll

  When to use the shortcut created the following location:

  Shutdown - shutdown.exe/s/t 00

  Restart - shutdown.exe/r/t 00

  Sleep - shutdown.exe/h

  I hope this helps!

• flashing screen, power button fails (error of hard disk startup, seen many posts have this)

  I thought it would be the best forum page to post, but in any case I had trouble with these two things. The first is this random/flicker flashing, screen tapping the top of the screen could delay, but this is very random and makes sometimes standby extended or even restart more rare. I don't think overheatiing is because it looks cool enough. Very random though sometimes it happens not every day or a few days.

  The power button is very recent, it turns that if I do something such as unplug it or open/close the screen as I've seen, really don't know where these two could come, but this laptop is second-hand on ebay with a new OS installed.

  The HARD drive error is common so I saw, so I can deal with it. The usual startup error, a reboot solves this problem and it starts to load normally, have not seen all the patches, in addition to a clean wipe I don't want nessiserally to do.

  A few things you might want to know:

  OS: Windows 7 Edition home premium

  Quad core i5

  graphics card intel integrated (use an ATI mobility Radeon HD 5650)

  Just ask if something else should be, thank you.

  I suggest to retrieve what you saved on your laptop and replace the HARD drive, you now have. It seems that the HARD drive, you may be out of any day. Make sure the replacement HARD drive is not too big.

  THX

• the monitor can not display any image on the screen. CPU power button is lit orange instead of green.

  Original title: I have absolutely no idea of what is wrong with my Dell Dimension C521 Windows Vista (x 86)

  It is impossible to display an image on the screen. CPU power button is lit orange instead of green.

  See page 47 of the owner's manual

  http://support.Dell.com/support/eDOCS/systems/dimc521/en/OM_EN/RP333A00.PDF

• Out of reactive HTML5: missing the 'next' and 'back' buttons on the pop-up windows that have been converted into hyperlinks dishes

  I use a 30 day trial of Robohelp 2015 to test. I opened a Robohelp projected created in 10, let HR to update and generated a reactive power of HTML5. Then the output, I selected "Convert popups AutoSize and custom linking size" and 'convert popups only of the text into hyperlinks' tab optimization, everything seems to work fine, except that in the popups converted to hypertext links, the 'next' and 'back' buttons disappeared. (these buttons are present in all the other subjects) I also added bread crumbs by adding a placeholder on the main page of the project, and the breadcrumbs not appear in these subjects, either.

  Anyone know what might be happening and how to fix it? 1 million thanks!

  Dawn

  Hi Dawn

  The back and next buttons are normally related to a sequence to browse. As these are topics of popup, has no way for them to be part of a sequence to browse, so no buttons would be added.

  If you want the buttons, you must manually delete the links to popup, then create topics with the same content. Then ensure that they are part of the sequence to browse.

  See you soon... Rick

• My computer is stuck on the Welcome screen and the power button does not work. How can I activate it finish (and on)?

  My computer is a Windows XP laptop. It actually worked fine this morning, but now my power button does not work and the computer does not start correctly.

  Hello

  Its best to contact the manufacturer of the computer as it might be a hardware problem.

• G62X-400 (ld642av) does not load, power button ribbon cable could be damaged.

  Laptop of the friend's daughter had a problem with the cable going to the LCD.  When opening it I noticed a few missing screws of the machine near the back and the middle. I disassembled and made the display cable stressed I guess because the flex of the missing screws and when pressure is applied, the screen would come. I replaced the cable and all right, or so I thought.

  Problem is that the tablecloth of the power button seems to be a bit funky as well.  Wouldn't really go back in the connector zif or flip back connector and the small bar on the connector ended detach.  I thought I got it on, it came on, but I didn't know it was apparently no longer take a charge.  Bottom line is that the laptop ran until the exhausted battery.  If the power button is damaged, preventing powering the laptop or charge the battery or something else?

  The answer is Yes - when I force the cable using the pressure, it charges the battery and agrees by the charger.  I'll have to get a new power ribbon cable, because he seems to have lost some of the metal contacts on the bottom.

• The power button will not turn on my computer. Is there a way to solve this problem, or the computer not sleep once I do back on?

  I have a MacBook Pro 2011.

  The power button does not turn the computer on when the computer goes to black screen.

  The battery he is

  iI tried to Community assistance to research and tried to wait. The next morning, I was able to turn it back on. Now, it happened again.

  Please help me. I can afford a new Mac.

  Thank you

  Get it fixed. Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.