Screen.invalidate () is within a TimerTask possible?

Similar Questions

• EliteBook 8540w: two external screens on an EliteBook8540w - is it Possible?

  Hello fellow users of HP laptop

  I own an EliteBook 8540w .

  Here are the detailed specifications of the box.

  Processor type: Mobile Quad Core Intel Core i7-740QM, 2100 MHz (16 x 131)

  Card mother name: Hewlett-Packard HP EliteBook 8540w

  Motherboard Chipset: Intel Ibex Peak - M QM57, Intel Clarksfield

  System memory: 8119 MB (DDR3 - 1333 DDR3 SDRAM)

  DIMM1: Samsung M471B5273CH0-CH9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)

  DIMM2: Samsung M471B5273CH0-CH9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)

  Video card: NVIDIA Quadro FX 1800 M (1 GB)

  Monitors:

  Ideally, I would like to connect two Dell 2412 M. Is this possible or am I looking for something specific when it connects monitors?

  I guess I can connect a monitor to the VGA connector and the other via the DisplayPort connection, right?

  Thank you for your help and your time.

  Best regards

  W9Y

  Need help is no longer.

  Find all the info, I needed to here which lead me to here and Yes, apparently it is possible.

  Citing the second link:

  The EliteBook 2540p, 8440p/w, 8540p /w (with NVIDIA graphics card), 8740w (with NVIDIA graphics), 644Xb, 645Xb, 654Xb, 655Xb ProBook can produce up to a maximum of two screens in clone or extended mode via the integrated VGA and DisplayPort (DP) or via the VGA, DVI and DP on the docking station there. The laptop screen is counted as a poster so that if it is used, a single external display can be used. If the laptop screen is not used, two external displays can be used.

  Finally no less I would like to mention that I was using "f.lux" lately, a great addition to the work in front of screens after sunset. Software removes the blue light of the screen after the sunset and this then simulates the light of the evening which, unlike the light of the Sun, does not your body and most of the brain all think it's day and so more alert.

  This new way you can spread your screen after working more at night or after sunset and get to sleep more quickly since your brain is not listening to 'daylight' and therefore alert and awake but the faster ready evening light to himself to sleep. Sleep of the night people. Sleepling enough is just as important as good eating and exercise.

  Took a little time to get used to but now I couldn't imagine a screen in the evening without it. Kevin edited my last answer where a direct link with this piece of genius was related, but if you're looking for f.lux online you will find as soon as POSSIBLE. I hope it's OK to mention this fact for other users working in front of the screens. Thank you Kevin for not taking this information a second time, is there no direct link this time.

  If you want to learn more about the blue light and its effects and learn to see yourself check out this article on ScienceDaily, a revelation.

• When you start windows or turn the power off, on-screen messages in Spanish, is it possible to just switch to English?

  Hi team,

  My question is this. I installed windows 7 ultimate on my Lalonde and a virtual machine, two of them have been installed in Spanish, I downloaded the English MUI Pack and I installed successfully.

  Now, I'm able to see everything in English once I'm connected, however when windows is start or turn off, the messages on the screen appear in Spanish.

  On this basis, make is possible to just switch to English?

  Original title: language

  Ralph, try the procedure described on this page.

• How to get BitMapField painted on screen invalidate()

  Mark and. Al to the RIM:

  If you have one interface:

  public interface Placeable {
  
      public abstract int X();
      public abstract int Y();
  
  }
  

  which is used to create a BitMapfield that implements this interface and is contained in a screen with a delegated manager:

  import net.berrysoft.dib.interfaces.Placeable;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.Manager;
  
  public class GameManager extends Manager {
  
      public GameManager() {
          super(Manager.NO_HORIZONTAL_SCROLL | Manager.NO_VERTICAL_SCROLL);
      }
  
      protected void sublayout(int width, int height) {
          Placeable field;
  
          // Loop through all the fields contained with the layout manager
          for(int i = 0; i < getFieldCount(); i++) {
              field = (Placeable)getField(i);     // Get a field (the board)
  
              // Set the position of the field based on field's coordinates
              setPositionChild((Field) field, field.X(), field.Y());
              layoutChild((Field) field, width, height);      // Layout the field
          }
  
          setExtent(width, height);       // Set the manager's dimensions
      }
  
  }
  

  Why not invalidating the display, layout of the screen or even the two leads the BitMapField repainted to a new position (if its coordinates were in facted modified by another code)?

  Here is the corresponding code of the base class abstract of an extended BitMapField:

  public abstract class Block extends BitmapField implements Placeable {
  
      public  boolean isSelected( ) { return selected; }
      public  void    setSelected( boolean selected ) { this.selected = selected; }
  
      public  String Name()   { return name; }
  
      Block(String name, int x, int y, int left, int top, int width, int height) {
          this.name = name;
  
          // Extract the bitmap for this block
          bitmap = new Bitmap(width, height);
          Graphics g = new Graphics(bitmap);
          g.drawBitmap(0, 0, width, height, Bitmap.getBitmapResource("blocks.png"), left, top);
          setBitmap(bitmap);
  
          this.x = (x * Game.BLOCKSIZE) + Game.getBoard( ).X( ) + Game.BOARDER_SIZE;
          this.y = (y * Game.BLOCKSIZE) + Game.getBoard( ).Y( ) + Game.BOARDER_SIZE;
  
          x1 = x;     // Save starting location for new game reset
          y1 = y;
      }
  
      public  void click( ) {
          selected = !selected;
      }
  
      public void move(int d) {
          if( !isSelected( ) )
              return;
  
          // Move the block
          switch(d) {
              case Move.LEFT:
                  this.x = x - Game.BLOCKSIZE;
                  break;
              case Move.RIGHT:
                  this.x = x + Game.BLOCKSIZE;
                  break;
              case Move.UP:
                  this.y = y - Game.BLOCKSIZE;
                  break;
              case Move.DOWN:
                  this.y = y + Game.BLOCKSIZE;
                  break;
          }
      }
  
      public void reset( ) {
          x = x1;
          y = y1;
      }
  
      public boolean  isFocusable() {
          return true;
      }
  
      // Placeable Interface
      public      int X()     { return x; }
      public      int Y()     { return y; }
  
      // PRIVATE IMPLEMENTATION
  
      private     static  int     dotSize = 8;
  
      private     String  name;                   // Family member
      private     int     x, y;
      private     int     x1, y1;                 // Initial coordinates
      private     Bitmap  bitmap;
  
      protected   boolean selected;               // True if selected for movement
  
      protected void drawFocus(Graphics g, boolean on) {
          if( selected ) {
              // Draw selection marker
              g.setColor(Color.GREEN);
              g.fillArc(getWidth()/2 - dotSize/2, getHeight()/2 - dotSize/2, dotSize, dotSize, 0, 360);
          } else {
              // Draw focus marker
              g.setColor(Color.YELLOW);
              g.fillArc(getWidth()/2 - dotSize/2, getHeight()/2 - dotSize/2, dotSize, dotSize, 0, 360);
          }
          invalidate( );
      }
  
  }
  

  It seems we should be able to invalidate everything simply screen when a block is placed, and that this would then re - introduce the screen through Manager representative, who would in turn ask each block layout, then the painting, but instead, regardless of the coordinates of blocks, it appears at the same place and does NOT move.

  Is this a bug in the API?  How do I invalidate the screen and the repainted?  (That is using the API, as it was designed to be used)

  When an object is invalidated, the framework calls it the layout() and then object?  What is the sequence of events in the frame please.

  Patrick

  When the position of a field is changed, you must call updateLayout().

  updateLayout() call layout page/sublayout on the fields, then invalidate().

  Invalidate() simply calls the object.

• full screen mode two monitors, 1 VM, possible?

  Is it possible to have my a Windows 7 VM mode full screen on two monitors?

  VMWare Fusion 6 - OS X Mavericks

  Hello

  Open VMware Fusion > in the menu bar, click View > click on "use all displays in mode full-screen.

  Now when you put a virtual machine in full-screen, it must use both screens.

• display too large on / off. Zoom, text size all the normal value, how do I get screen to fit within the monitor _

  already checked the themes of office/customization, dpi resolution, text size, appearance, zoom... know not how to fix, it is a (shared) unit and can not say that everything has been done to the system, know that I tried to upgrade to vista sp2 but updated (recommended) is obsolete!  HELP, PLEASE

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Screen invalidate invokeAction causes on the ground?

  I ran into a bit of an interesting problem that I can't understand. Here's the test code:

  public class TestScreen extends MainScreen {   public TestScreen() {     addMenuItem(new MenuItem("Click Me!", 100, 100) {         public void run() { }     });
  
       add(new LF());    }
  
    public void onFocusNotify(boolean focus) {        if(focus) {           invalidate();     } }
  
    class LF extends ObjectListField {        public LF() {         insert(0, "item 0");          insert(1, "item 1");      }
  
        protected boolean invokeAction(int action) {          insert(getSize(), "item " + getSize());           UiApplication.getUiApplication().getActiveScreen().invalidate();          return true;      } }}
  

  It behaves normally until you try to click the custom menu item and look at it triggers the BA invokeAction method. The problem has something to do with onFocusNotify, because he fixed this glitch. What happens here?

  I forgot to mention: running the last plug-in in eclipse with 8520 Simulator SDK 5.0 running

  Sorry if double posting is against the rules. I feel like such a * beep *. Call super.onFocusNotify solves the problem.

• Screen goes black within the window from time to time. Must restart approx. been past at least a year.

  Using several screens on my mac, the photoshop window will sometimes turn completely black (no toolbars, etc, just the workspace) and ill have to restart the app sick of all these little bugs. Turning off mercury to solve the problem makes it too slow to use photoshop.

  See you soon

  I still don't know what you mean by 'mercury'... you have disabled the use of GPU in Photoshop.  OK, this means that the problem is in the video card driver or video card itself.

  10.10 MacOS has some video card driver bugs that could explain the problem.  On MacOS 10.9 it had some problems introduced in 10.9.5 on some laptop models (do not have the list for the moment).

  Apple is aware of the driver problems video and work on solutions.

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• It is possible to spread out the apps on more than three screens?

  I have a load of apps on my pre, and most of them are on a single screen.  I know how to move from one screen to the other but is possible to have more than three screens of applications?

  As far as I KNOW, no without patches and HomeBrew apps... Not sure if this will be an option in webOS 2.0, but I'd like to see this too!

  WyreNut

• Games - increase the screen size (full screen) - is it possible?

  Hello

  I have a Windows XP virtual machine on my VMware Workstation 9.0.2. I tried to run a cup of old games, like for example, Diablo, which I am not able to play on my physical computer and it works - what is cool there. The only problem I have is that I'm not able to make the game fit the full screen of my virtual machine. However I tried different sizes of my computer virtual screen, the game still appears as a small square in the Middle, where the rest of the virtual machine screen remains black. Is it possible to fix it on VMware Workstation? I tried to change the resolution of my virtual machine, but it was not useful.

  PS. of course, I know that I can change a resolution of my physical machine to increase the size of the game in the virtual machine screen, but it does not completely solve the problem, it's just to do a little better.

  Thank you much for the help.

  Many older games use a fixed resolution, ignoring what you set on your desktop.

  You can try to change the VM fullscreen and "Guest Stretch" setting in the display preferences.

• Can I lock screen on Nike running watch edition Nike app

  ON the new Apple Watch Nike edition is possible to lock the screen to perform activities is not possible on the series Apple Watch Nike 1

  Hello

  To clarify, series 1 does not refer to the original watch. He referred to a new Apple Watch model that has the same characteristics as the original Apple Watch, with the exception of a new dual core processor.

  To get answers to questions about how Nike + apps work / will be knit, you can consult the developer support resources or contact them here (via the 'Need help' link):

  • https://secure-nikeplus.Nike.com/plus/support

  However, like the Apple Watch Nike + is has not yet been published, you can that some information is not yet available.

• My iphone6s screen is cracked and unusable. Can I still save my phone?

  My iphone 6s is cracked and unusable, the screen has coloured lines all over. Can I still save my phone? (photos, contacts, ect.)

  If you have settings > iCloud > backup turned on while the screen was still usable, it is possible that the phone will automatically back up if it is connected to the wi - fi and you plug it in to charge. If you have this setting enabled, you could probably already a backup since the last time it was loaded when you're connected to wi - fi.

• Is there a solution for Firefox running with a blank screen (no text or graphics) in Ubuntu 12.04?

  After receiving the upgrade to Firefox 40.0.2 a white screen appears. It is not possible to change the settings of Firefox since the opening page because no text or graphics are displayed. This has happened on two computers, an emachines T3624 and a Gateway 2000. I tried a complete elimination and new installation using the Synaptic Package Manager. I am writing from the Chrome browser.

  I tried to create a user.js file in the Firefox profile folder and adding the line:
  user_pref ("gfx.xrender.enabled", false);
  Who has not resolved the blank white screen issue.
  Then I tried to disable the file prefs.js and user.js file by renameing them.
  It worked. When I restarted Firefox, a new prefs.js was generated. The prefs.js file that causes a blank screen has the user_pref ("gfx.xrender.enabled", false); line in it. The new prefs.js didn't user_pref ("gfx.xrender.enabled", false); in it.

  So, I found the prefs.js file in other machine with the same problem and commented of the user_pref ("gfx.xrender.enabled", false); line. (I guess that remove this line would also work.) Firefox now works on the second machine and is no longer launches a blank white screen.

• Firefox supports the talkback screen reader?

  If the screen reader is supported, is it possible to download plugins to access such webvism for android?

  Hello
  We do not support the screen reader, it should "work" If your phone settings are already using talkback. Here is an article on this subject:
  http://support.Mozilla.org/KB/how-use-Talkback-support-Firefox-and...

  I don't know about the Add - ons actually, but you can do a trial of the item in the main menu modules.

  Thank you
  Michelle