EliteBook 8540w: two external screens on an EliteBook8540w - is it Possible?

Similar Questions

• Several external screens with Dell Precision M4700

  I just got a M4700 of precision with 8 64-bit Windows and graphics of AMD over-pants M4000. According to the Dell site and other articles I read, in addition to the built-in screen of the laptop, I should be able to connect to two other screens without the docking station or five other screens with a docking station. However, until now I couldn't get an external display to work even if I use the docking station. If I use certain ports, I can get two external displays to work, but only if I disable the built-in screen.

  Without the base, the laptop has a HDMI, a VGA, and a DisplayPort. I tried to connect my two external monitors to these ports in all possible combinations. Whenever I connect the external second monitor it is detected in the 'Screen Resolution' windows dialog but default to disabled. If I try to turn on the display, then click 'Apply' then I get this message:

  "The display settings could not be saved. Please try another combination of display settings. »

  After that first of all, I got this problem with the default drivers preinstalled by Dell, I tried updating to the latest driver available on the AMD website and I always get the same question.

  Any ideas are much appreciated.

  I solved the problem. AMD Eyefinity cards require that you are using DisplayPort but it supports up to two "legacy" displays (DVI, VGA, etc.). The built-in computer screen is considered a single existing screen, it allows only to another non - DP monitor. I was using DisplayPort but I connect to a DVI monitor using a PASSIVE adapter. If the adapter is passive then the video card output still a DVI signal and causing count her among the existing views. I had two ACTIVE DP to DVI converters and now I have three monitors + built-in screen and it works fine.

• EliteBook 8540w freezes at startup screen Windows after the installation of 2 x 4 GB

  Hello

  I have a laptop Elitebook 8540w. I wanted to upgrade to 2 x 4 GB 2x2gb RAM memory. I did buy a kit of 2 x 4 GB I wanted, instead, I bought two chips of memory from 4 GB of HP.

  After having replaced the modules of the notebook does not start.

  What has been done:

  -Restore default bios

  My first question is: I realize, it is best to purchase a kit of 2 matching tokens, but it's a must?

  Thanks in advance,

  2worlds.

  Hi 2worlds,.

  Your Elitebook 8540w is a commercial product and for your question more exposure, I would post in the trade forums. Here is a link to the forum Commercial Notebook.

  Thank you

• The two external monitors show the same screen

  original title: using 2 external monitors on a laptop using Dynadock U10 problems

  Hi guys,.

  I try to use two external monitors using my a Dynadock U10..., I bought because it says you can use two external monitors with it!

  I installed the drivers for Displaylink etc.

  I plugged both monitors to the Dynadock (one via the VGA input) and one through DVI. When I have my laptop open it using cell phone as main screen and extends the office to both monitors, but both monitors have the same screen. If I identify screens, the laptop screen is 1 'and the monitors are the two 3'.

  If I close the laptop (I put the settings to not do anything if the lid is closed) and select my monitor as the main screen, they still both have the same image and the settins wont let me go to another screen. If I identify the screens, the two screens are developed under the number "1".

  I use Windows Vista. My laptop graphics card is "ATI Radeon 3100 Graphics"

  Any help would be appreciated!

  See you soon,.

  Stu

  Your video card is not serious with this home solution 'USB '.

  Toshiba is your point of contact.

  However - to answer your question - as much as I know you cannot do what you are trying to do.  You can use both outputs monitor, but the results you see are what you would expect.

• EliteBook 8540w black screen and lights

  Hello, first of all sorry for my bad English.

  I have this Elitebook 8540w, who suddenly shows this problem: when I try it lights up, the screen remains black and all the leds on the switch cover are active. The wireless and the power led on the front are also active, while the disc and the electrical connection led are disabled. The fan is too active.

  That's what I tried:

  -Works with only the battery or cable

  -Reset the bios, remove the RTC battery

  -Change the RAM

  -Remove the internal Sata Drive

  -Remove the battery and cable, press and hold the power button for a minute and then install the battery and power upwards

  None of these actions has had some effect. What should I do?

  Thank you

  Please contact the HP Support, I think that your motherboard has a problem

• EliteBook 8460p and external monitor/projector does not work

  We have several 8460 with the same question.

  They work fine until you try to connect to an external monitor/TV/projector and then the trouble begins.

  When you use Fn + F4 to establish a dual monitor output the external monitor and integrated display switches between the two, as if the PC cannot determine the display to use. On rare occasions, it works but it is not reliable. I ve it first met on a fair and when I tried it before the session, it worked fine. During the session it just started this behavior. I took it out and replaced the graphics drivers, BIOS and made sure that the resolution was not the issue. It worked fine and I returned it to the room of the lesson and he did it again.

  I started to believe that the projector was the wrong part here, so I didn't want to use the PC again on this fair, but no other computer shows no signs of distress.

  Since then, it was at the beginning of this spring, I ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave in the same way.

  I have spent some time now and searched the web but found nothing I ve doesn't explain anything around it and so far no update driver, and no other updates (including a full installation) has solved this problem.

  There are the HP Elitebook 8460p with AMD graphics card in the computer.

  There is no any other indication that something isn't going to the newspaper or whatever it is.

  Any suggestion of what may be the cause of this is useful.

  Hello and thanks for the reply.

  The original problem is old, from 2012, in fact and more or less no longer applies. Some of the more troublesome computers has been replaced with other models at the time and the 8460 p is used more or less entirely users who do not have the need for external screens.

  Have not seen it since a long time but we've updated the BIOS and drivers a couple of times so the current status is in fact "stable".

  Thus, we can say that the problem is not more, but whatever solved the problem is unknown.

• EliteBook 8540w - HP ProtectTools Security Manager Installation error 1001

  On my HP EliteBook 8540w notebook, I'm trying to install the HP ProtectTools Security Manager to use the finger print scanner, but at the end of the installation, I get an error with code 1001 and installation is cancelled and the versteckte for fingerprinting is therefore unusable.

  I tried the two sp48575_v5.0.7.711.exe and the sp49992_v5.1.0.736reva.exe and both give the same error 1001.

  No idea on how to solve this problem, thanks in advance.

  I am running windows XP sp3

  Please see the capture of the error screen.

  

  Thanks for your help/suggestions.

  I tried the same thing and it worked, I disabled all services start in the msconfig and restarted, but I got the same error, then the next I went through all running services and disabled all that I thought was unnecessary and has tried to install and installed without error. Then I enabled return all services in msconfig and restarted my computer and the hp protect the safety of the tool Manager works as expected.

• EliteBook 8540w: lack of drivers for Elitebook 8540w

  Hello

  I miss a few drivers after installing WIndows 7 Professional (32 bit) operating system. Can you please help. I tried to download some, but ended up having blue screens. I reinstalled the operating system.

  Here are the identifiers for which it reports no driver

  Network-> controller

  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086 & REV_35

  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086

  PCI\VEN_8086 & DEV_4239 & CC_028000

  PCI\VEN_8086 & DEV_4239 & CC_0280

  -> PCI serial port

  PCI\VEN_8086 & DEV_3B67 & SUBSYS_1521103C & REV_06

  PCI\VEN_8086 & DEV_3B67 & SUBSYS_1521103C

  PCI\VEN_8086 & DEV_3B67 & CC_070002

  PCI\VEN_8086 & DEV_3B67 & CC_0700

  Simple Intervenion PCI controller->

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1521103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1521103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  Universal series (USB)-> Bus controller

  PCI\VEN_1033 & DEV_0194 & SUBSYS_1521103C & REV_03

  PCI\VEN_1033 & DEV_0194 & SUBSYS_1521103C

  PCI\VEN_1033 & DEV_0194 & CC_0C0330

  PCI\VEN_1033 & DEV_0194 & CC_0C03

  Unknown-> device
  USB\VID_138A & PID_0007 REV_0072
  USB\VID_138A & PID_0007

  Unknown-> device
  ACPI\HPQ0004
  * HPQ0004

  Can you please the links for drivers. Also, if there is no particular order I need to follow

  Hello, Intel 82577LM and 82577LC Gigabit Ethernet Driver

  Links: http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_101142_1 & sp4ts.oid = 4173772

  Administration Active Intel (r) technology-

  Link: ftp://ftp.hp.com/pub/softpaq/sp61501-62000/sp61783.exe

  Intel(r) Management Engine Interface

  Link: ftp://ftp.hp.com/pub/softlib/software11/COL34171/pv-84629-1/sp46290.exe

  Driver USB-controller for Hewlett-Packard-HP EliteBook 8540w

  Link: ftp://ftp.hp.com/pub/softpaq/sp54501-55000/sp54511.exe

  Validity Sensor (VFS451)

  Link: http://ftp.hp.com/pub/softpaq/sp66501-67000/sp66915.exe

  HP Mobile Data Protection sensor / 3d guard player

  Link: http://ftp.hp.com/pub/softpaq/sp60001-60500/sp60389.exe

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

  r K

• Two external LCD on Satellite Pro P100-324

  Hello friends

  I have the Satellite Pro P100-324 with GeForce Go 7900 GS graphics card. I need to work with two external LCD screens. A primary and secondary as secondary in DualView. But it does not work under Windows XP SP2. In Vista Home Basic, it works normally. Is it possible to work on this laptop Windows XP with two monitors external sith DualView mode?

  Thank you.

  Stand by. You tell me that you can run two external displays connected to your Satellite P100?

  Can you please tell me how you have connected both of them and how you can switch on the two external displays?
  As far as I know it is possible to use a single external screen, but two at the same time

• Charger for Elitebook 8540W

  I got a charger 462602-001.

  Now, I wonder if it works with my Elitebook 8540w.

  I was looking for information, but I can't find my cell phone in the list.

  The that I find is the 8510w and even I know it's the same card for both.

  Can I use it?

  Hello

  It is a 90W charger and the 8540W can use:

  • Outside 150 W Smart adapter
  • External 120 W Smart adapter
  • External 90 W Smart adapter
  His blood pressure is perhaps a little weak, but you can use it before I buy a new charger.

• Portege Z30 - need to extend the display on two external displays

  Hi all

  I'm running Bloomberg and need the image to extend on the screens LCD HD complete two 24 ". Including my current laptop's built-in display, I use three panels at the same time. I can do with the Z30 1 CZ? Should I buy a docking station for that?

  Right now I use a ultrabook from another manufacturer but I'm not satisfied with the reasons that have nothing to do with the display. Currently, I use a docking station, where a screen connects by DVI and one VGA cable.

  Can I use the VGA and HDMI from laptop ports to get the same solution with the Z30?
  Best wishes
  Peter

  To my knowledge the display function depends on the graphics card/chip.

  Usually, you can use a VGA or HDMI output.
  VGA (RGB) port provides analog, HDMI provides digital signals, and as far as I know, you can't use both at the same time

  However, you could buy a "hdmi adapter usb adapter allowing you to use two external monitors simultaneously.

• Tecra A9 and express port replicator - two external monitors

  Hello

  I have a Toshiba Tecra A9 laptop and a Toshiba express port replicator, the Replicator has two outputs DVI & VGA, but I just can't seam to allow them both to use my funds rather than 1 desktop computer screens and the screen of the laptop.

  Is this possible?

  See you soon

  Ash.

  As far as I know that something like this is not possible. The video signal may not be spited and sent to two video output ports. If you want to use two external monitors, you need an additional video source as Toshiba Dynadock or another solution.

• Two external monitors can be connected to the docking station?

  Is it possible to connect two external monitors to a docking of HP 2740? If so, how it is with 1 single VGA port on the docking station. The tablet which is embodied is a HP Elitebook 2760P.

  Yes, you got that right.

  He landed again until what's available / condition on the 2nd external monitor. These days most of them VGA, HDMI and DVI while that few of them have display port too.

• Re: Can I connect two external monitors to my Tecra M7?

  I have a Tecra M7, I would put up two external monitors. I install one on the VGA port and one DVI port and I try to extend the monitor overall, but the only option I have is to an external monitor and the screen of the tablet itself.

  Anyone have any ideas on how to solve this problem?

  As far as I know that something like this is not possible. Graphics card can send the signal on a port only, VGA or DVI.
  If you want to use two external monitors, you need an external device, such as Toshiba Dynadock (docking station USB with VGA or DVI port). Using the docking station, you will have three monitors shown in display properties. We will be connected directly to the laptop and the second on this docking station.

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.