Screen on window 10 flashing with facial recognition initial connection Logo. (I can not connect)

Similar Questions

• Facial recognition on Qosmio x 300 may not register well as audit success

  Hello

  Just got my computer laptop-Qosmx300-13W. Had problems with the fingerprint reader in that it would not even go. Uninstalled and installed the latest version of Toshiba download page... s everything works now.

  The problem now is with facial recognition. I can access the registry page, register successfully and the face is successfully verified. a new form appears. It has my username (but not name, said only: '-') and my computer name. Initially, there are two additional fields, "Password" and "Confirm password". The confirmation password field appears for a split second, then disappears. So, you can enter a password, but not a password for confirmation.

  The OK button has a blue box around it. Using the software as it was of the recovery partition, when I click on 'ok' it gives me an error indicating that the confirmation password is not correct. I tried the update of the drivers\software from the download from Toshiba site today but I still see the same behavior that only now is worse in the sense that when I click on 'ok' as opposed to a message telling me the password is incorrect, I get on a string error access violation. More information can be provided if required please do not hesitate to ask.

  Any help would be much appreciated.

  Experience of Toshiba's not going too well I'm afraid: two s has neither worked on the box... then again it is common with most businesses so hope still it can be solved.

  Thanks in advance (ps. I prefer to be contacted by email, [email protected] if it appeal to you can moderators let this address here, I understand that leaving the addresses may lead to get spam in my Inbox, that's a risk I'm willing to take. (Thank you).

  Here's an update for someone else who could have this problem.

  Seems the facial recognition is in conflict with the extra finger print scanner another question... it seems that facial recognition does not work when my user account is a single administrator account...

  After posting my initial post, I went and created a test account. I then tried the registration process for the admin account and all crossed only instead of passwords requested that my fingerprints (I have the fingerprint reader enabled). Once who has been entered, everything is ok. However at the time wherever I deleted the test registration face recognition account began to play up again. That said the account that has already been registered works very well.

  My advice to anyone else in this situation is to create a test windows account. Try to record again. If successful removal of the test account and you're done.

• I have a HP laptop with Windows 7 (OS) with 64 bit, but very slow. Can you suggest a way to start my fast pc.

  I have a HP laptop with Windows 7 (OS) with 64 bit, but very slow. Can you suggest a way to start my fast pc? Most of the time it doesn't quite work.

  Hello

  There are a number of possible reasons, your computer may run slowly - virus infection or malware, missing to defragment the hard drive, too many programs loading at startup - and all with different causes / solutions. So here goes:

  Virus/Malware - Download, install and run these scanners (only Avast so you do not have your own antivirus installed):

  Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html .

  SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .

  Avast Antivirus: http://download.cnet.com/Avast-Free-Antivirus/3000-2239_4-10019223.html .

  Disk Defragging - install and run this app: http://download.cnet.com/Auslogics-Disk-Defrag/3000-2094_4-10567503.html .

  Startup programs - install this application, then select start only the programs you need to run at startup, as your antivirus, firewall, but not your Disk Defragmenter (examples):

  Splash Guard: http://download.cnet.com/Startup-Guard/3000-2239_4-10958203.html.

  Also, your system's drivers are up-to-date? Updated the driver can also slow down your system. Go to HP.com and insert the complete your laptop model number in the search box to find your latest drivers.

  Let me know if these speed up your pc.

  Kind regards

  BearPup

• "Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item. "When you try to open a. EXE file.

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  Well, I was on my computer, I tried to open an exe file and I got this message

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  I have windows xp, anyone have an idea what to do?

  Hi Reaper14,

  ·         The question is limited to this particular .exe file?

  ·         You can open other files very well?

  If you are unable to open a .exe file, refer to the following article.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Click on the link below.

  Cannot open EXE files

• My computer installed all updates for Windows (I was invited to do so). Now, I can not use citrix to access things. Frustrating

  My computer installed all updates for Windows (I was invited to do so).  Now, I can not use citrix to access things. Frustrating

  Supported Citrix or your COMPUTER administrator will be able to help with this.

  Look in the event log to see if anything relevant is registered.

  John

• When I download windows 8 and try to install it says that we can not connect now, check your internet connection

  * Original title: download windows 8

  When I download windows 8 and try to install it says that we can not connect now, check your internet connection but my internet is good?

  What download link you use. ?  The only one I know is installation media to create for Windows - 8.1 help Windows .

  Given that support for Windows 8 ends, I'd do a 8.1 of Windows Installer Clean , following the procedure in step 4 to activate Windows 8.1 using a product key of Windows 8.  It gives the default product key to install, after which, you can use your key to activate.

• my old computer is not damaged, no code activation with me, I have DVDs but you can not activate

  my old computer is not damaged, no code activation with me, I have DVDs but you can not activate. Is there a solution for this problem. Failed to contact Adobe technical support. Tent for the last 10 days, maybe I don't know the right way to communicate with them

  If you registered the software at Adobe, you should be able to connect to the Adobe site and find your serial number.

• I can't log in as an administrator in my windows 7 PC with 32-bit operating system. What can I do?

  I put my password to log on as an administrator.  When I restrart the computer and try to log in it asked me to change the password to connect. I did it. When I try to getback to my computer with the new password, it says it's a mistake. Now, I can not connect as an administrator. What can I do? And who is the administrator of a computer that I own. I'm puzzled. Your help please

  I put my password to log on as an administrator.

  I don't understand what you mean with this statement - please explain.

  To recover from all that you have done, you can follow these steps:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you did what you did.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Windows xp is hijacked, and even in safe mode, I can not connect. My account has been disabled and I am the owner of the computer.

  It seems that someone else took the administrator account and he has rights that replace the mines on the computer.  Try to reinstall windows xp professional, it tells me nothing, but freezes...
  Try to connect to windows on my account, he tells me that my account is disabled.
  Try to connect through safe mode that come no user name.
  Trying to set up the administrator to log on without password, said that the account has been disabled.

  I am trying to reinstall the Windows XP Professional with the disc I have, but with this gel, I can't.
  I am very discouraged and would like this to be resolved.  I'm on another computer write because I can't even connect to the other.
  It won't do anything when trying to go to the last good known either.
  My copy of Microsoft security essentials would be not updated and I had restarted and can't get back in it is saying I had a Trojan horse and he removed twice, but he was still there.  If someone else gets this problem to not restart or you cannot recover.

  Reinstalling Windows can sometimes be a difficult process and most of the time that it is not even necessary to solve most of the problems.

  In case it is necessary to reinstall Windows XP Pro, it is imperative that you back up all your data first. did you?

  In addition, if a system is compromised or broken, a clean install should be made. This means that you must configure your motherboard BIOS to boot from the installation CD (instead of the usual default, which is the hard drive). The way to do this varies according to the brand and model of your PC.

  Assuming that you have the correct CD for your PC, these instructions should work for you:

  http://michaelstevenstech.com/cleanxpinstall.html

  http://michaelstevenstech.com/bios_manufacturer.htm

  If you want to help more away from us, please answer the following questions:

  1. What is the make, model and model number of your PC?

  2. assuming you have Windows XP Pro installed on it, what level SP is in?

  3. you have the XP Pro corresponding correct for her installation CD? In other words, if you have an OEM version, you must use a CD of the OEM version. Here again, a commercial version should work as long as it is not already in use elsewhere. What level of SP is the disc in?

  4. you say that you can not connect to Windows, yet you mention that MSE has given you a message. Please specify.

  Finally, once you're convinced that all your important files are backed up and if you want to try the Windows XP system restore (or other methods) before something as drastic as reinstalling Windows, we can give you advice. And then, if damage malware is really bad, it may not be worth it. But if you want to try, let know us.

• I have a problem with my location network cards and I can not find my LAN on my PC.

  I can't find my LAN

  Hello! Im having trouble with the location of my network cards and I can not find my LAN on my pc - I have recently updated my software with phone system automated.

  Hello

  Perform the steps in the article mentioned below and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Hope this information helps.

• can a windows 7 update to reset or create another OS, I can not access internet and ive tried everything.

  Ive talked to my ISP and the computer manufacturing and they are useless, I tried to order a recovery disc and they just sent me that badly. That's why I want to know if upgrade windows 7 can help with the issue

  Hello

  errors can be EPF forward in an upgrade

  It is not recommended as a way to solve the problems

  as they sent you the wrong recovery disc, share with them

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Horizon view 7, Windows 10, Apex 2800, results of initial connection to the single monitor, later work very well

  Hey guys, this is the configuration.

  View of the horizon 7.0.0

  ESXi 6.0 build 3620759 (U2)

  Apex 2800 and driver package 2.5.3 (supports for Windows 10 and vSphere 6)

  Windows 10 x 64

  VMware Tools 10.0.8

  The symptom is on the initial connection, the second monitor is not same display and the primaries to the resolution no standard. Try to whittle down where it is. PCoIP server log shows that APEX is only used for one of the monitors, which is not good. Later connections show using Apex for two. Apex driver is installed in the Windows 10 comments as well as ESXi. Think it is purely a question of Teradici, but thought I'd post here in case someone else has experienced.

  Initials

  

  Subsequent

  

  I was able to work around the problem by making a pool out of the gold statue and by connecting to it with a zero client, by disconnecting and then reconnecting in. Then I built the pool out of this statue in gold which had already been connected with a zero client. For good measure, I also reinstalled the drivers of the Apex in the gold statue.

• Error: Windows Media Player cannot play the file. The player can not support the Codec that was used to compress the file, MP3 downloads will not play

  Original title: MP3 downloads don't play no not on WMP

  My Windows Media Player recently stopped playing downloads from Amazon. I've never had this problem before. I installed VLC Player, has not worked... off the WMP in the Windows app, restarted, turned on the back and restarted... did not help. I get the message "Windows Media Player cannot play the file. The player may not support the Codec used to compress the file. This is for multiple downloads, so I don't think they would be all corrupted files.

  Hello
   
  Have you done any software or changes to the material on the computer before this problem?
   
  You mentioned that the files do not play on a third-party player as well. I suggest you to check if the files are corrupt.
   
  Method 1:

  How to Download Codecs automatically in Windows Media for Windows XP player

  http://support.Microsoft.com/kb/291818
   
  Method 2:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992
   
  In addition, run the fixit from the link:
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/
   
  Hope the information is useful.

• Satellite L505-12 q... having a problem with facial recognition

  Hello!

  I have a strange problem with my face recognition. Yesterday it worked perfectly, but now is not. Note I've cleaned the registry with CCleaner, but doesn't have a backup before that (stupid..).
  I downloaded the installation of support the download location and Toshiba face recognition, but to install it, you must uninstall the old program. OK, but the uninstall and is a mistake, quote: "Error 1326.Error safety: C:\ProgramData\TOSHIBA\SmartFaceV\ GetLastError:5.

  The uninstall restores and I get another error, quote: "error - 1603 Fatal error during installation. See using Windows Installer (Msi.chm) or MSDN for more information. »

  Hi mate

  As far as I know that you can set the operating system to the point of time at the beginning
  Try to roll back the OS to the beginning until you are any changes

  As I know the CCLeaner to uninstall the applications installed as well. It cleans the defective files also maybe you need to clean again before installing this app again

  It's certainly worth a try!

• Use Firefox with flash 10.3.183.75 20.0.1, can not see the video if its built-in Flash. Can see perfectly if they are not incorporated. Chrome works very well.

  http://64.165.34.7:8134 / videoplayer3.html works well, but http://64.165.34.7:8134 / flash_ready.html does not load video in Firefox (black screen with the plug-in is needed, when you try to install "couldn't find any plugin"). Chrome works very well. IE shows an outline of the flan.

  flash_ready.html
  <!DOCTYPE html>
      <html>
          <head runat="server">
              <title>
                  HTML5 sample video player
              </title>
  </head>
  <body>
   <form id="Schedule" runat="server">
      <div >
  	  <EMBED height=500 width=700 src=http://64.165.34.7:8134/videoplayer3.html allowscriptaccess="always" wmode="transparent" allowFullScreen="true">
          </EMBED>
  		</div>
  		</form>
  </body>
  </html>
  
  videoplayer3.html
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Sample HTML5 Video player</title>
  
  </head>
  
  <body>
  
  <h1>Sample HTML5 Video player demo</h1>
  
  <object type="application/x-shockwave-flash" data="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" width="640" height="360">
  	<param name="movie" value="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" />
  	<param name="allowFullScreen" value="true" />
  	<param name="wmode" value="transparent" />
  	<param name="flashVars" value="controls=true&amp;poster=http%3A%2F%2Fsandbox.thewikies.com%2Fvfe-generator%2Fimages%2Fbig-buck-bunny_poster.jpg&amp;src=http%3A%2F%2Fclips.vorwaerts-gmbh.de%2Fbig_buck_bunny.mp4" />
  	<img alt="Big Buck Bunny" src="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" />
  </object>
  <p>
  	<strong>Download video:</strong> <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4">MP4 format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.ogv">Ogg format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm">WebM format</a>
  </p>
  </body>
  </html>

  I used this instead of < embed >. He began working

  < object type = "text/html" data = "http://64.165.34.7:8134 / videoplayer3.html" style = "width: 460px;" "height: 260px" > < / object >