screen resolution wrong, but can't even see Save or Cancel below to change

Similar Questions

• Portege R700 internal to screen very dark but can use the external monitor

  Hi guys,.

  just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark!

  However, the laptop could start up as normal and I could use it normally through an external display!

  Subsequently, I replaced the screen and it started working again (happy days)!
  However, a few weeks down the line the same problem again apparently did screen dies.

  I take off again and disconnect and reconnect the screen just to see if that would solve the problem and he did, back and working again. I even tried the old screen I swapped and that works too!
  So I paid £140 + for a new screen that I didn't need, my question is what is the problem?

  Could not find anything else on this topic so would appreciate any help thanks

  Ross

  Hello

  It is difficult to say what might be wrong here usually black screen can be related to a faulty FL inverter.
  But laptop computer s display supports a backlight Led FL inverter should not be a problem here
  Maybe some loose contacts caused this

• File/folder preserved but can still edit and save the file

  Nice day

  I just want to ask how to protect a file/folder on Windows 7 from deletion, but I can still edit and save to the same file... (the file/folder is shared on other computers)...
  Thanks in advance...
  Lorenz

  You can go in the advanced security settings and explicitly deny file record all users "deleting subfolders and files" and "Remove" permissions, make sure that you propagate permissions to all child objects.  But, as mentioned by another poster, if users can change the files they can damage or save them as empty files.

  John

• My Windows 8.0 laptop screen is black but can still see white mice

  Hello

  My laptop screen is black after I updated to windows, and then did a registry clean up & optimization.  I tried to go into safe mode to try to overthrow windows reverts to its previous state feasible, but I can't get into safe mode.  I tried to press F8 or F8 and Shift together key but the windows loads normally, and then the screen stays black.  I can see the mouse and she is white and sensitive.

  Someone help please pointing me in the right direction of what to do to get it working again.

  Thank you very much.

  Ted

  Hi Ted,

  See if you can access the Windows system restore using the following method.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose a restore point at least 48 hours before the problem arose first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• After the launch of an updated Firefox tries to connect to the server to update for hours, but can't, even if I am connected to the internet. How can I update in this case?

  I get requests to update for firefox 7.01: if I try Firefox shows me a screen in which it tries to connect to the server to update (during business hours) even if I am connected to the internet: I am able to browse with firefox. I also downloaded firefox 9 but first I can't open it: "there is already a version of firefox open. Second: This version also asked me to update, but still the same problem. I'm new with mac, please help...

  Greetz

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Outlook Express - I can see the list of received emails, but can't read them in the display below pane. It is empty.

  I use Outlook Express for my e-mail.

  I can see the list of emails received, but cannot be read in the display below pane. It is empty.
  You are dragging the separator between the components of Message and preview low path by chance?
   
  See this news, but at least you're behind in the updates should not be the reason.
   
  Possible fixes for the display of an empty message
  www.oehelp.com/OETips.aspx#10 
   
   
  Finally, try in a new identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
   
  Note: Do not use the main word in the name of the new identity.

• Icons for Smartphones blackBerry on installing home screen-2 mailboxes, but send 3 files see the

  I have 2 mailbox store Configuration, but email 3 records show on the home what this first file screen? The first is xxxxx@hotmail.com the second is [email protected]. Why is the first without a title and what is it? Thank you

  Hello

  The third you speak without a name is "mail". Depending on the settings of your BB, you can have your emails from all accounts appear in there, as well as SMS and MMS messages. When you have added your two emails, he created folders separated for them, but they may still appear in the main "Messages" folder, if you have not changed the settings of this.

  Here are the instructions on how to change these settings (in the manual):

  Hide application messages key messages

  You can prevent specific messages from e-mail accounts in the main messages application. You can also set a separate icon on the home screen for SMS text messages and MMS messages. Depending on your theme, a separate icon can appear by default.

  1. In the home screen, click the Messages icon.
  2. Press the Menu key.
  3. Click on Options.
  4. Click on the Inbox settings.
     • To hide specific messages of email accounts in the email accounts section, clear the check box next to one or more e-mail accounts.
     • To hide text SMS messages and MMS messages in Other message Types section, clear the TEXT box.
  5. Press the Menu key.
  6. Click Save.

• I am tring to connect to internet but can't even if eternet cable is plugged

  cable plugged into my computer but not able to connect to internet, I tried in case of problems, but without success, can anyone help me

  Hi StaffordSpence,

  1. what happens when you try to connect to the internet?

  2. What is the operating system installed on your computer?

  3. you receive an error message?

  4 did you change on your computer before the show?

  5. who is your Internet service provider?

  6. If it works well before?

  7. what happens when you run Troubleshooter?

  8. What is the number of brand and model of your computer?

  Perform the following troubleshooting steps.

  Why can't I connect to the Internet?

  Windows wireless and wired network connection problems

• Can't even see the sansa desktop file.

  I just got my sansa fuze 4 GB black. Yay! connect with the mp3 to the computer. I try to put music in mp3. does not work. I NEED HELP PLEASEE.

  Try going to Settings/System Settings/USB mode and change it to MSC. Then, connect and display in my computer.

• Screen resolution is wrong - say 1024 x 768, but is in fact 800 x 600?

  OK, this is weird.

  I have Windows 7 running in Parallels on my MacBook Pro.

  I changed my screen resolution to 1024 x 768 to view a Web site, that I am currently in Windows. He did not, which it should, because it is designed for. I talked to someone else and they looked on their machine. He equipped very well. They looked in their version of Win7 in Parallels. It has worked well. I checked on my iMac, running Windows 7 in analogies. Worked well. On a PC, end.

  It seems that on this one computer, when I put the screen resolution of 1024 x 768, it is actually set to 800 x 600.

  Someone at - it ideas why this is happening?

  Hello

  Thank you for writing to Microsoft Community.

  This problem could be linked to obsolete or damaged graphics card drivers or incorrect screen resolution setting, you can also consult the provided Microsoft Help Articles below for more information on the change of screen resolution and also update the graphic card drivers.

  Change your screen resolution

  Video cards: frequently asked questions

  As you have Windows 7 running in Parallels on MacBook Pro, I ask you to take contact with Parallels support.

  Hope the helps of information provided. Feel free to write us if you have any problems/concerns while working under Windows.

• WIndows 7 - can not lower the screen resolution

  I don't know when it happened... apparently, after one of the windows updates because it worked very well, a month or two ago... anyway, here's my problem. A month ago I got the Sims 3 World Adeventures. I installed it and he played wonderfully. I have themselves are involved in the Facebook games and he has not played for a few weeks, but recently decided to go back to the Sims 3. I clicked the shortcut, open Launcher, I clicked on play and my screen went black, then white, then gray, then horizontal strips of red, green and blue, I think that the colors are then complete blue (like the blue BSOD) then he began again, black, white etc. I could alt tab out after a few minutes.  No error message, no beeps and the computer wasn't warm because I had just started before trying to play.

  I'm running on an Acer Aspite Z5600 with touchscreen (its an all-in-one... looks like a monitor etc), Windows Home Premium, 3 gig of ram, op 64 bit, Pentium system dual core, Intel G45/G43 Express chipset. I went to check my graphics settings - the resolution is set in 1920 x 1080 monitor shows a built-in display. I thought that maybe the resolution was causing problems because the Sims 3 do not like this high middle (I never changed it and the game worked before but I thought of one another program may have) when I put the lower resolution and hit apply I had the same changes in strange black on white, etc.. Yet once again, I had to alt tab out... it took forever to do, and my resolution had not changed.  Everything else seems to work fine... my browser and other... I can play some Facebook games and it seems pretty much any game that starts in a window / windowed mode. I changed the settings on the Sims 3 to play in windowed mode and it starts very well (I HATE the windowed mode tho) I decided to do some research and see if I could find a solution later and decided to go play another game, (one of the verizon games I had played before without problem) and he did the same thing as Sims 3 dang. It is a demand pretty weak game graphics-wise (his Poppit to go - even my old laptop can play it.) so having unplayable all of a sudden he had me beat. Color changes look almost like a kind of graphical test. Hope I have not confused LOL thanks everybody for any help.

  I have a reversible temporary solution of 10 steps for this problem, im also using a race of z5600 acer windows 7 and when I try to run anything that changes the resolution of the screen the screen turns black and flashes different colors is a way around this, but you will not be able to use the full screen , and when your done with the game or whatever you will be able to use the full screen new heres how

  1. start

  2 right click computer

  3. click on properties

  4. click on Device Manager

  5. If Conrtol user account appears, click Yes

  6. click on the tab display cards

  7. right click Intel G45/43 Express Chipset

  8. click on turn off

  9. now the display begins to blink and you'll notice that sub-par signifigantly window, you only 3 options for screen resolution size but most of the games will take place and you will be able to see

  10. to make the fullscreen back you will need to follow the same steps as above, then click Activate

  Hope that this help is the only way it would work for me ~ JUZTICE

• Screen resolution too big on HP Pavilion dv6608ca after the release of Windows 7

  Hi, I recently updated my dv6608ca HP Pavilion from Vista to Windows 7 64 bit, and all of a sudden the screen resolution is simply too large, even after I adjust onscreen. I searched high and low, here and elsewhere, but can't seem to find the right driver.

  Can someone please?

  Thanks in advance.

  Chris

  Newuser1227, welcome to the forum.

  Have you used Windows Update and update HP to see if this installs the driver appropriate?

• My screen resolution continues to change itself whenever I connect to my computer.

  original title; My screen resolution continues to change itself whenever I connect to my computer. I change and then he returned for double the size whenever I connect. Why? How can I stop this?

  When I go to change the screen resolution, it is up to the time where new loggin.  I change back and then as soon as I connect it is to double the size.  How can I stop this?  I tried to check to see if something is somehow tied to my Start menu, but I don't see anything that would make the resolution of the screen to change.

  Hello

  You can try to uninstall the driver from the computer graphics card and then download the latest version from the manufacturer's Web site and install it, check if it works

• screen resolution test

  Hello world

  I wonder if anyone has thoughts on it - and maybe suggestions of resources to use.

  Re: screen resolution test for display of the Web site - I find that different online tools all behave in a sort of strange way - and maybe I didn't "win" it.

  Example - if I test my old site, www.robcosh.com on any of these services to see how it appears, choose iPhone 5 like the size just means that they create a rectangle of height and use it as a window to look at my site - where I would have to scroll up and down or sideways.   This does not represent the reality in some way, form!   My iPhone 5 shows my site in full if it is in landscape or portrait position and it is automatically resized to fit the page.

  With this, it seems that these tools are useless to see how a site might behave with different screen resolutions.

  Can all comment and point me to specific tools which I can trust the output of to evaluate the appearance of my sites through a variety of resolutions?

  Thank you very much!

  Rob

  Design between traditional desktop platform and other types of devices, such as smart phones, is not at all easy.

  While it is true that web browser of any phone smart modern dimensionnera automatically a web site of 'office' to fit its screen phone user must use techniques of pinch-zoom to make the page useful at all. When a web desktop layout is resized to fit the screen of the phone on the arrangement of office content will often too small to read and navigation elements are too small to select with a finger. It's one of the reasons why so many websites have separate versions of 'mobile '.

  In recent years, smart phones have radically increased screen resolution. Many Android-based phones have full HD 1920 x 1080 resolution screens, support of higher resolution like 2560 x 1440. Phone screens are still the same physical size (great for a phone screen, but tiny compared to modern desktop computer monitors), but they pack you in many more pixels in the same room size of screen real estate. This is complicating the situation for the design of a mobile version of a website. Some phones very old still in limited use resolution while some new phones have better than the 1080 p resolution.

  The traditional desktop platform is not standing still either. Probably a layout 960 pixels regular on its own won't. Technical HiPDI are recommended for the gap between the levels of older computer monitors resolution and HD and better than HD parameters used in recent monitors.

  Solution? A good additional amount of planning and work. Adobe Muse doesn't fully support a fully "reactive" approach to web design, but it does support HiDPI and allows for separate mobile and Tablet site generation. Vector graphics will increase in importance. SVG images can properly scale for a variety of screen sizes and large HiDPI implemented. But I think Adobe needs to do a job more improve support SVG in Muse and Illustrator.

• How to change the screen resolution of 1024 x 768 to 1600 x 900

  original title: How can I update my computer for the new screen resulition my old system just to 1024 x 768 and my new moniter is 1600 x 900

  My computer is fine, but I like update the resolution of the screen, it is only 1024 x 768 and I would that he 1600 X 900, what can I'd to make do this

  Hello

  Thanks for posting in the Microsoft Community. Looks like you want to change the screen resolution of 1600 x 900.

  We need additional information about this problem to help you better:

  1. what version of Windows are you using?

  2. What is the brand and model of the computer?

  Visit this link to learn more about the operating system that you use:

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-in/Windows/which-operating-system

  Visit this link if you use Windows 7 to change the resolution:

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Visit this link if you are using Windows Vista for change the resolution:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  In addition, check if the graphics card drivers are updated:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.