Screen turns white with the pointer in the bottom RIGHT

Similar Questions

• When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  HELP me get my E mail.

  When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  http://INFOTEP.bee.pl/info.php?avted=;     I'm not that day on computers, and many of their functions and a few times I get a little lost in there so if anyone can help me I really appreciate it.    Thank you!!!

  Hello

  1. what operating system do you use?

  2. What mail client do you use?

  3. you have made any changes to your

  4. what site you're talking about?

  5. How do you access the webpage?

  6. you use Internet explorer or another browser to access the site?

  The link give http://infotep.bee.pl/info.php?avted takes me to a blank Web page

  Are you referring to http://www.bee.pl/index

  Refer to the following, who says that the sites host malware

  http://www.Google.com/SafeBrowsing/diagnostic?site=monidopo.bee.pl/

• P2412H - displayed briefly and then the screen turns white.

  Hello

  I got a pair of monitors of P2412H little more 3 years, bought from a dealer - I don't have tags and monitors say manufactured in September 2011 (so I think that, apart from any warranty).

  This morning one of them has failed - it displays briefly, then the screen turns white.

  Manual test:

  1 unplugged every wire and power button which is held for 15 seconds.

  2 reconnect the power cord.

  -Switch will blue

  -L' initial Dell boot screen is displayed on the screen for less than a second.

  -L the screen turns white.

  -Stays blue power button

  3. press one of the control buttons

  -Nothing happens

  4. disconnect the monitor

  5. connect the monitor to on PC with Windows connected using DVI.

  6. connect the power cord

  -Switch will blue

  -L' initial Dell boot screen is displayed on the screen for less than a second.

  -L the screen turns white.

  -Stays blue power button

  I also tried to reset the monitor according to the instructions of the manual by pressing keys 1 and 4, but as the monitor does not appear, I couldn't see anything.

  The monitor did briefly revived properly after one of my attempts back manually, but the after turning on and the new to check if the problem itself had set the monitor returned to the not displaying no not again.

  Can anyone help or point me in the right direction on how to fix it?

  Thank you

  * UPDATE *.

  Disassembled the monitor I've used this as a guide to youtube to open the monitor the safely:

  cs_setInnerHtml ('video_aebd897a-01ed-42eb-a8c5-b3b6ecee6556', ");

  Inspect the circuits printed for all the obvious problems such as cracked soldering or fried capacitors.

  Could not see the obvious problems... you realign a couple of back vertical capacitors where some of them were in sharp corners appeared to be very close together as a result.

  Back together carefully.

  Backwards and now it works very well for 48 hours.

• Re: NB200 - making noise and the screen turns white

  Hello

  My laptop makes the high pitched noise and the screen turns white. Please help with this question.

  Thank you

  Hello

  It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

  Welcome them

• 11 - e010nr after the signature on the photo and a few icons appear and then the screen turns white and reappears

  Laptop TouchSmart 11, e010nr 11, windows 8, no error message. I can Ctrl/alt/del and obtain the lock... the Task Manager screen. This screen works but nothing else

  Hi danny61,

  Just to clarify , when your screen turns white and reappears, the icons reappear also? and do you not see that set the desktop background or the taskbar? that it could be as simple as restarting the Explorer process in the Task Manager.

  If you can update me if I can see how I can help

• When trying to view videos full screen, the screen turns white!

  When I try to watch videos, I love to watch full-screen, but when I press the icon full screen the screen turns white. I have to press the ESC key to return to normal. What will fix this?

  i right click on video > select settings > remove the check mark from material

  Acceleration.
   
  II] download and install: -.
  Adobe flash player: -.
  http://www.Adobe.com/products/flashplayer/
   
  III] update your graphics card driver on the website of the manufacturer of the graphics card.

• Restart computer, windows xp screen came then the screen turned white

  Restart computer, windows xp screen came then the screen turned white

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error at startup of the computer?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• BlackBerry Smartphones do - what do I do when the blackberry starts to load, but then the screen turns white

  A couple of weeks, I have recharge my phone and he kept on his auto turn off or not charging well so when I rang Virgin they told me to buy a new battery I did, I loaded the new battery in another phone blackberry by following the instructions at and when I got the new battery for my blackberry torch It started to load as usual but the screen turned white and it turn off its self.

  You need to ring up Virgin again and explain to them that it was not the battery because of your questions.  It is for them to take in charge your device and, as appropriate, to support RIM to get is resolved.

• during the expansion of a video (by clicking the full screen) the screen turns white

  
   
  In Youtube, when I click the icon at the bottom right of the screen to enlarge, the screen becomes all white and I can't see any video. How can I change the setting for this

  Might be interesting to try to update your video driver.

• Windows Media Player 11. When I click on full screen, the screen becomes white and the sound still works. Some tips on how to fix?

  I can't get Windows Media Player to become full screen.  The screen turns white, but there still audio.  I just upgraded to version 11, but the problem is still there.  Any advice?

  Yes, the video driver is something else. If you are not familiar with the update of your system... it can be better if you ask someone more experienced to help you.

  The following article provides information on how to identify your video card, how to find a new driver and how to install it:

  How to upgrade drivers for a video card
  http://www.ehow.com/how_5572_upgrade-drivers-video.html

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

• Screen turns off after the opening of the session. The mouse cursor only appears

  Don't know where to post this, but here's my problem.

  I have a Dell laptop with VISTA professional who has worked perfect for 8-9 months. Since the beginning of December I started having this problem haunting log-in where to provide the user name and password, the screen turns white (black) and I see is a mouse cursor. Nothing else appears. I can get to the hostel Monsignor task by doing a Ctrl-Alt-Delete, but a stop or restart is not the problem. I tried the safe mode or VGA mode without result. The only thing that seems to work is time. If I leave the system at the prompt to logon for 5-10 minutes, I can then connect you ok but this delay is unacceptable. It's as if there is a service that needs timeout? Any ideas on what may cause this behavior?

  The behavior is also described by others here and here but none of the suggestions have solved the problem for me.

  Appreciate any help. Thank you!

  -Jetland

  You wanted to let you know the final outcome of this problem. I spent two good months of fighting through this problem and try all of the advice given. The problems have persisted. Beyond the suggestions here, there are pages on Google pages on this topic is delicate balancing sifting through the "answers".  So far, no one, including Microsoft, has been able to identify the problem or to locate a formal resolution. After having satisfied this during a road trip in 2 weeks, I have downgraded to Windows XP and wait anxiously for the release of Windows 7.

  -Jetland

• Blue screen of death with the computer restarts

  Hi, thanks in advance.

  My problem is when I open Skype, whole screen turns blue with an exception system error. Then, the computer restarts and occurs whenever I try to open Skype.

  Please help, I tried to update the drivers and bios, including windows updates, but still the problem persists. I also associate the dxdiag here.

  The BSOD is caused by ASMedia USB3.0 eXtensible Host Controller (asmtxhci.sys).

  Try to downgrade the ASMedia driver:

  http://community.Skype.com/T5/Windows-desktop-client/BSOD-every-time-I-log-in-to-Skype/m-p/4304407#M...

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• After the stand-by mode screen turns green or the GET messy graphics - Satellite M100-165

  When I leave my phone for more than 20 minutes on the stand of mode and I try to turn it on again the screen turns green or the graphics be annoying.
  In order to work, I have to reset and turn it back on. Does anyone know what I can do about it?
  Thanks in advance.

  Hello

  This problem occurs since the first day? Is your unit a clean install of the OS to factory settings?

• Aspire power E1 light - 572P stays on when I stopped. Screen turns off, but the router is plugged

  When I quit my Aspire E1 - 572P the screen turns off but the blue light and the router remains connected.  Ethernet services and internet used to go off. Any suggestions please.

  Go to power options. On the left side, click on choose what the power button. Scroll down and uncheck quick start. Save changes and close.