Script display the VMS using RDM

Similar Questions

• How to run script on the web using HTTP web page?

  Hi guys
  
  Please let me know how to execute script on the web using HTTP web page?
  
  Concerning
  Frank

  Hi Jos,

  ODI provides web-based UI to run scenarios using metadata (read only your components ODI) Navigator and designer Lighweight (you can change the mapping here).

  If please review how to install the metadata browser in ODI and take a look at the document ODI Setup for more information.

  Thank you
  Guru

• Display the test using the output "string" indicator?

  Hi, I'm trying out the test to the indicator of string data as you can see below,

  but with 'For' the logic of loop that it is only the display last number, so if you run this, you'll see

  following output.

  Test #6

  If I move the concatenation of string outside of the loop block, you will see the result as below.

  Test #0123456

  However, I want to achieve more of output. Can someone suggest me a way to do it?

  By the way, I use the for loop.

  The output I want to display with the for loop

  Test #0

  1

  2

  3

  4

  5

  6

  Thank you

  

  Close but no cigar.

  You need concatenate the string using a shift register.

  

  This will be the output:

  

• Cannot display the error using Netflix page in Windows Media Center

  Hello I use Windows Vista Home Premium and Windows Media Center. I watched titles on Netflix in the past successfully in Windows Media Center, but today I get this error when I click to play a title:

  Cannot display the page. Windows Media Center cannot open the page.  Contact technical support for the program.

  And so here I am.

  I see all of the titles on my queue when I click on the Netflix icon, so obviously I am connected and connect, but cannot actually look at all the titles.

  Thanks for your help

  What is the error you get when you try to watch Netflix from the browser?
  What browser do you use?

  Go to start, all programs, Microsoft Silverlight and open Microsoft Silverlight.

  The tab of the Configuration window About, let us know which Version you have installed.
  Go to the Read tab, and then make sure that the enabled for playback of content protected.
  Then go to the Application Storage tab, select the Netflix web site from the list and then click on Remove to remove it. There may be more than one listed Netflix website, for each of them.

  After the changes, try once again, Netflix in Media Center and browser.

  You can also try reinstalling Silverlight by going to start, Control Panel, uninstall a program, select Microsoft Silverlight, and then click on uninstall and cross the guests. After uninstalling to joinhttp://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx and reinstall Silverlight.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP running startup scripts displays the taskbar?

  Hi all

  I have a newly installed Server 2003 domain.

  I have also 2 machines that I have connected to the domain. One of them works very well (goes on the internet, readers of network etc.).

  The other is does not work. It connects to the domain, reboot, then I log into the admin account. After that I did a gpupdate, and then restart the system.

  The problem is, when the system starts up again, it seems to start to run startup scripts, then seems to automatically connect on a called user account $ media (Media is the name of the computer).

  It displays the windows desktop and begins to run explorer.exe, with this user account (MEDIA$), with the start of the Running of scripts loading screen and does not get more.

  (Both the Pc running Windows XP Professional SP3)

  Any fix for that?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919

  Hope the helps of information.

• Display the fonts used in a pdf file

  Hi, can someone please tell me a simple way to learn how to get a list of all the fonts used in a certain pdf I downloaded and the desire to change?

  Thank you.

  Look under file - properties - Fonts.

• Automate the VMs using PowerCLI performance report

  Dear Experts,

  I want to automate the monthly performance report (CPU, memory, disk) of the Virtual Machines using PowerCLI or any other script. Basically, I want to do under the tasks mentioned on monthly basis:

  1. use of the CPU (of all virtual machines) statistical average based monthly (as a percentage). Same report for memory (in percent) and the disc (Kbps).

  2. is it possible folderwise? I have several clients in my support infrastructure and I made segregation in making records and for each of them, this report is necessary.

  3. export only these 3 reports in Excel.

  Details of the infrastructure: ESXi 4.0 and 4.1

  Dear Experts, your kind suggestions will be much appreciated? As it takes a lot of time as we do this manually.

  Thank you very much!

  No problem, with the Group-Object cmdlet we can divide the result by VM.

  $metrics = "cpu.usage.average","mem.usage.average","disk.usage.average"
  $start = (Get-Date).AddDays(-30)
  
  $folders = Get-Folder -Location (Get-Folder -Name vm -Location Datacenters)
  # $folders = Get-Folder -Name Folder1,Folder2,Folder3
  &{foreach($folder in $folders){
      $vms = Get-VM -Location $folder    if($vms){
        $stats = Get-Stat -Entity $vms -Stat $metrics -Start $start -ErrorAction SilentlyContinue      if($stats){
          $stats | Group-Object -Property {$_.Entity.Name} | %{
            New-Object PSObject -Property @{
              Folder = $folder.Name            VM = $_.Values[0]
              CpuAvg = ($_.Group | where {$_.MetricId -eq "cpu.usage.average"} | Measure-Object -Property Value -Average).Average            MemAvg = ($_.Group | where {$_.MetricId -eq "mem.usage.average"} | Measure-Object -Property Value -Average).Average            DiskAvg = ($_.Group | where {$_.MetricId -eq "disk.usage.average"} | Measure-Object -Property Value -Average).Average          }
          }
        }
      }
    }} | Export-Csv C:\report.csv -NoTypeInformation -UseCulture
  

• Open a new window and displays the record using JavaScript information

  I would be very grateful if someone could help with the following query. I produced a simple database using APEX, a page that displays all the records that are currently (in the form of tables). However, due to the amount of information and the resolution of the screen, not all columns are displayed on the resulting web page.
  
  I would like to change by making the information contained in a hyperlink column, which, once pressed will open a new window containing most (if not all) of the information for the particular record.
  
  I think that this requires JavaScript and, possibly, SQL, however, I do not know where to start.
  
  Can anyone provide any assistance will be appreciated.
  
  If you need additional information, let me know.

  You can start with this:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:23

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Unable to see the rate of disk on the VMS using NFS

  I think I know the root of the problem... it's because in vCenter, it isn't follow rates disk VMDK on NFS with the metric of the standard rate of disk.  vCenter actually uses the 'rate of virtual disk' instead.  But it seems that all default counters for vFoglight aren't looking 'Rate of virtual disk' but 'Rate of disc' so that all my virtual machines with no available data trying to determine their rate of disk.

  Is there anyway to change this behavior?

  There are some conditions in order to obtain metrics NFS:

  • vSphere 4.1 and later versions
  • vFoglight 6.6 and FGLAM base VMware agent
  • Metric NFS does not appear on the dashboard by default, only exposed in the dashboard customized by drag / move.
    • This will change in a future release.

  I Don t have any NFS data warehouses in my lab so I can´t show you a dashboard example with action of NFS. If I get my hands on a laboratory with NFS I'll post back a few screenshots here.

  / Mattias

• How to display the page using a MS Word RTF borders in a report

  I use 11g BI Publisher and I have installed the plugin for MS WORD. I am able to create a template report with success however, the borders for my page are not get made when running or downloading the PDF file.

  I have to do something more? I'm new to this tool so apologies if the question is stupid.

  Concerning

  Hello

  BI Publisher doesn't support page border, but it is possible using watermark.

  Please follow this

  (1) open a new word document and insert a page border.

  (2) adjust the zoom level of the document word to 60% so that the entire page at a glance

  (3) take a screenshot of the word document

  (4) open the MS Paint application and paste the screen of the document copied word

  (5) select and Corp. only the page borders and save it as jpg or png gile format

  (6) model RTF open a report

  7) click on watermark-> select the image in the watermark, and then select the saved image

  (8) to adjust the size of the scale in manual numbers. In my case in excess of 160% in my document.

  (9) does not control the wash option and close the watermark.

  (10) this is the page border.

  Thank you.

• How to display the data using "BOLD" model rtf

  Hello frenz.
  I need to display a particular column in bold letters or number in bold... How can I do this...

  Use
  Can use a conditional formatting if, in a table

• PowerCLI Script to the report on the failed VM jobs

  I figured out how to report on the events of VM (get-vievent), but no has no stains of VM. If a snapshot of the virtual computer fails, sometimes it never connect the events of the VM, but lists an error on the display of tasks. We are trying to monitor the clichés failed since its part of our backup solution.

  I was looking for a way to report these tasks/failure of events in a daily report, or simply add to the daily report of amazing Alan Renouf that we use.

  does anyone have any suggestions? For an example, see the attached screenshots. See how, in the view tasks, you have mistakes, but in the view of events, there is no errors.

  Any help would be great. Thank you!

  Jeff

  PowerCLI Script to the report on the failed VM jobs

  I figured out how to report on the events of VM (get-vievent), but no has no stains of VM. If a snapshot of the virtual computer fails, sometimes it never connect the events of the VM, but lists an error on the display of tasks. We are trying to monitor the clichés failed since its part of our backup solution.

  I was looking for a way to report these tasks/failure of events in a daily report, or simply add to the daily report of amazing Alan Renouf that we use.

  does anyone have any suggestions? For an example, see the attached screenshots. See how, in the view tasks, you have mistakes, but in the view of events, there is no errors.

  Any help would be great. Thank you!

  Jeff

  Hi Jeff

  I had exactly the same need to identify stereotypes having failed and drilled until SDK and LucD suggestions (thank you) to encode the following lines:

  $vmlist = Get-VM |sort Name
  
  foreach ($guestname in $vmlist)
  {
      $hours = 48 # Number of hours back
        $tasknumber = 999          # Windowsize of the Task collector
  $taskMgr = Get-View TaskManager
  
  # Create hash table. Each entry is a create snapshot task
  $report = @{}
  
  $filter = New-Object VMware.Vim.TaskFilterSpec
  $filter.Time = New-Object VMware.Vim.TaskFilterSpecByTime
  $filter.Time.beginTime = (Get-Date).AddHours(-$hours)
  $filter.Time.timeType = "startedTime"
  
  $collectionImpl = Get-View ($taskMgr.CreateCollectorForTasks($filter))
  
  $dummy = $collectionImpl.RewindCollector
  $collection = $collectionImpl.ReadNextTasks($tasknumber)
  while($collection -ne $null){
  $collection | where {$_.DescriptionId -eq "VirtualMachine.createSnapshot" -and $_.EntityName -eq $guestName} | %{
  if ($_.State -eq "Error") {
          write-host $_.EntityName
          write-host $_.StartTime
          write-host $_.State
          }
      else {
      }
  }
  $collection = $collectionImpl.ReadNextTasks($tasknumber)
  }
  $collectionImpl.DestroyCollector()
  
   }  
  

  This script displays the name of the virtual machines which met with an instant failure in the last 48 hours (a variable, you can change)

  This is just the beginning, because I want to count the shots failed and identify virtual computers that have more than 2 in 2 days

  Feel free to alter it at will.

  Enjoy

  Eric

• How to import the list of names of VM and opposed a script of the imported virtual machines list

  Hi guys,.

  Can someone help me and integrate a csv import script (which contains a list of VMS) and ran the script against the VMs imported to create a CSV output below? Thank you very much in advance.

  SE connect-VIServer xxxxxxxx

  $date = get-Date-format-M - d - yyyy

  . 'c:\Users\xxxx\test\test2\scripts\xxx scripts\Get - FolderPath.ps1'

  $folders = get-file-type vm | Get-FolderPath | Sort-Object Id

  {Set-Path function

  Param ($Object)

  foreach ($folder IN $folders) {}

  If ($folder. ID - eq $Object.Id) {}

  $result = $folder. Path

  breaking

  }

  }

  $result

  }

  Get - VM vditest - 1.xxx.internal | Select-Object - property Name,@{N='Datacenter'; E={$_| Get-Datacenter}},@{N='Cluster'; E={$_. VMHost.Parent}},

  NumCPU,MemoryGB,ProvisionedSpaceGB,@{N='Path'; E={($_. Folder | Get - FolderPath). Path}},@{N='FolderID'; E = {$_.folder.} ID}} | Export-Csv "C:\test\vm-xxx-$date.csv" - NoTypeInformation - UseCulture

  Try something like below script

  It assumes that your CSV file looks like this

  'Name '.

  "VM1.

  "VM2.

  The script

  VM.csv Import-Csv - UseCulture | %{

  Get-VM-name $_. Name |

  Select Name,

  @{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.

  NumCpu, MemoryGB,

  ProvisionedSpaceGB,

  @{N = "Path"; E = {}

  $current = get-view $_. ExtensionData.Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  FolderId

  }

• Display the value in the selection list

  Hi all
  Any body know how to get the text to display selection list in another text field? Suite of java script displays the value no text, I need another way around. I don't want to change the selection list that the user needs to see the text value.
  
  in the HTML section.
  

  < script language = "JavaScript" type = "text/javascript" >

  int f_getText (pThis, pThat) {}
  var enter_val = pThis;
  var return_val = pThat;
  {
  gReturn = document.getElementById ("enter_val") .value;
  {html_GetElement (return_val) .value = gReturn.toUpperCase ()}
  }
  }
  < /script >
  >
  
  in the HTML form element attributes.
  

  onBlur = "javascript:f_getText('P40_LOC_ID','P40_LOCATION')";

  "" Thank you
  
  Pascal M

  Change your JS function

  function f_getText (pThis, pThat){
  
  var  sel=$x(pThis);
  $x(pThat).value= sel.options[sel.selectedIndex].text
  
  }
  

  CITY

  Published by: city has 8 November 2008 17:24

• PowerCLI script to display the number of vCPU by VMhost use

  Hi all

  I'm looking to get help here with powerCLI script to list each total number of ESXi vCPU host that is used to determine if there are any ESXi host CPU is more engaged.

  According to suggestion of performance in some blog vExpert, is around 1: 3 of Jepp core ratio: vCPU allocated, then how to display the report with the powerCLI for something like this:

  PRODESXi01
  Total of nuclei available: 32
  Used by the virtual machine: 28

  PRODESXi02
  Total of nuclei available: 32
  Used by the virtual machine: 38

  So according to the result above, the PRODESXi02 is more committed by 6vCPU allocated to the virtual machine.

  Note: The available total carrots is taken from the value of logical processors from the contents tab, when you click on the vSphere console.

  How to get this report using PowerCLI?

  Thank you

  You mean something like this?

  {Foreach ($esx in Get-VMHost)

  $vCPU = get-VM-location $esx | Measure-object-property NumCpu-sum | Select - ExpandProperty sum

  $esx | Select Name,@{N='pCPU'; E={$_. NumCpu}},

  @{N = 'vCPU'; E = {$vCPU}},

  @{N = "Ratio"; E = {[math]: Round ($vCPU / $_.)} (NumCpu, 1)}}

  }