Windows XP running startup scripts displays the taskbar?

Similar Questions

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Hi, when I change my wallpaper or display the taskbar then restarted windows 7 (asus laptop) taskbar autohide, and change wallpaper unwelcom why I don't

  Hi, when I change my wallpaper or display the taskbar then restarted windows 7 (asus laptop) taskbar autohide, and change wallpaper unwelcom why I don't

  Hello

  This who exactly are you referring to when you say "change unwelcom why I do?"

  If the taskbar is hidden, point to where you saw last it show again. If you don't remember where you saw it, try pointing to the bottom of the screen first, then to the sides or top of the desktop, if necessary. You may need to move the pointer almost off the desktop computer to show the taskbar.

  Show or hide the taskbar

  You can check the status of the question in a new user account:

  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2: If the problem does not persist in the new user account, then you can try to copy the files from the existing to the new user account profile.

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Please after return of the State of the question.

• How to run the application startup script before the start of telnet (inetd)

  Hello
  
  I need to run my application startup script before the beginning of Telnet users on the server. At the present time, the script is at /etc/rc2.d/S98startup which is not useful.
  
  Thanks in advance...
  
  Published by: user4027740 on April 7, 2012 12:41

  I am inclined to ask 'why', but I refrain...

  The problem you'll have is that 'telnet' (really inetd) will be started by SMF and your app startup is a legacy script. I don't know of anyway to you allows to map addictive SMF one departure inherited. The only solution is to write a start of SMF for your application and do inetd:default require your application to be online before you start.

• BlackBerry Software windows explore opens automatically to display the volumes

  When I connect (usb or wireless) my BB 10 phone to my computer, Windows Explorer opens automatically to display the contents of the S/D card and the device. How can I disable auto open to explore?

  UH... I don't know any way for volumes of BB to the card and display without the running Device Manager. You may have a few weird things configured on your computer, deleting things from appearing in the system tray? Very strange... is the desktop running software? When it is, and the device is connected, the device manager must run.

  If you really can't find it, you will need to uninstall and reinstall the Desktop software and try again, this time not to select this option as you go.

  Good luck!

• To display the taskbar and Start Menu Properties dialog box

  To display the taskbar and Start Menu Properties dialog box, click on? in the context menu of the taskbar.

  Hello

  1 are. which option you referring?

  2. what you trying to accomplish?

  I suggest to check the following links and check if it helps.

  Taskbar of Windows: http://windows.microsoft.com/en-us/windows7/products/features/windows-taskbar

  The new taskbar of Windows 7: http://windows.microsoft.com/en-US/windows7/help/better-stronger-faster-the-windows-7-taskbar

  Hope this information is useful.

• Since the introduction of Windows 7 at startup I get the following original error-The 345 could not be located in the dynamiclink Library COMCTL.dll.

  Since the introduction of Windows 7 at startup, I get the following error - gnotify, exe the orginal 345 could not be located in dynamiclink Library COMCTL.dll. It gives me no options I try to get out and it takes several attempts to cancel, then, when it's a small login to my gmail page appears I connection and have no problem more until the next day when I start my computer to start all over again. I also had a horse of course for my pointer I can't find this option in Win 7 selection but I'm really now trying to figure how to set the error thanks all help appreciated

  Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I downloaded and installed creative cloud with no problems. From the window of creative cloud cannot display the APPS page (while other 'Home', 'Community' can be seen). This is why I can't select the application to be updated. Thanks for your help

  I have download and install creative cloud with no problems. In the window of creative cloud cannot display the APPS page (while other 'Home', 'Community' can be seen. This is why I can't select the application to be updated. Thanks for your help

  Please refer to the threads below where the issue has been addressed:

  Re: desktop is not displayed Panel apps? PC

  Missing Creative Cloud Desktop applications tab

• How can I run a script once the PC is booting and after I connect to my account?

  Hi all

  I'm using Vista, I want to run a script after that my PC is start and run script after I sign in to my account.

  Can someone tell me how I can get there?

  Thank you very much.

  SF

  Hello

  You can try the suggestions of the link to find out how to assign scripts at startup:

  Assign computer startup Scripts

  http://TechNet.Microsoft.com/en-us/library/cc770556.aspx

  Use startup, shutdown, logon, and Logoff Scripts

  http://TechNet.Microsoft.com/en-us/library/cc753404.aspx

  Reference: run a program automatically when Windows starts

  http://Windows.Microsoft.com/en-us/Windows-Vista/run-a-program-automatically-when-Windows-starts

  You can also post your query on the MSDN forum for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

• Windows Explorer (Vista) does not display the complete list of Favorites

  In the current w / last week, my IE (9) does not open a Favorites folder.

  
  (It is large enough - maybe entered 800 (I can't check. beak of this problem).)
  Then I noticed that Windows Explorer will never complete if I asked him to show the contents of this folder.
  (It shows a lot, but then never finished.)
  Worse, even if I peut stop it, if I try to go to another folder, it tries to display the original folder again.
  Worse, if I kill this window, the explorer.exe process continues to face of ~ 100% of my (two processor!) CENTRAL PROCESSING UNIT.
  
  Kill this process is not (even later) to get me a new Windows Explorer, & so I have to shut down or restart.
  Malwarebytes Pro says that my system is clean.
  .. .as is dskchk (sp?)
  I tried to isolate the problem by doing a binary search:
  • Find ~1/2 files in the offending file.
  • Move them to a new folder.
  • See if there is still an offending folder.

  .. but it took forever, because I keep falling on this problem that I try to do this last step.
  I'm running out of ideas!

  Hello

  Follow the following troubleshooting methods:

  Method: 1

  Start the computer in safe mode with network and then try to open the Favorites folder.

  Startup options (including safe mode)

  Method: 2

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  After you clean boot troubleshooting, follow step: 7 article to reset the computer in normal mode.

  Method: 3

  also, I would sugest to open internet explore mode no. Add-on and check how it works.

  Open internet explore mode no. Add-on

  a. click the Start button

  b. click on all programs

  c. click on accessories

  d. click on system tools

  e. then click Internet Explorer (No Add-ons)

  If disabling all add-ons solves the problem, you can disable all add-ons and then put modules only as needed.

• Windows Update: problem webite cannot display the page

  Just install a new hard drive and reinstalled the original XP Media Center operating system.  I get this error when you try to get the windows updates: the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.   Help, please.

  @Whitebearmike

  Question for you: what is the level of service pack of the operating system XP?

  If no or anything under service pack 3, you need to get to service pack 3.

  Run WINVER to check the service pack level.

  If your XP is the gold (no service pack) version or even the sp1 or sp2 windows (iirc) then automatic updates will not work.

  You must have service pack 3, but so that you have either installed SP1a or SP2.

  Please review carefully. Make a backup of your system offline media (before & after each service pack).

  To download service pack 2 - see http://go.microsoft.com/fwlink/?LinkID=186637

  To download service pack 3 - see http://go.microsoft.com/fwlink/?linkid=183302

  I invite you to do a mirror image of system backup once SP3 is correctly in place. Mirror-image backups are on the only good way to come back to a clean image, if and when disaster strikes.

  You can use the following to install the service Pack XP

  http://aumha.NET/viewforum.php?f=73

  http://aumha.NET/viewforum.php?f=83

  Note: MS is supported for Windows XP Service Pack 2 (SP2) ended on July 13, 2010.

• [CS5] Run a script on the open document

  Is it possible to run a script automatically whenever a document is open?

  Application has the "beforeOpen" event listener, which won't work, the document is not opened and Document has the "afterOpen" event listener, but which cannot be added until after the document is already open, so I'm not sure was what it serves.

  Any help would be appreciated.

  /Dan

  .. .and document has the "afterOpen" event listener, but will not be added until after the document is already open, so I'm not sure what it serves.

  You can do it-here is an example:

  #targetengine "MyEngine"
  
  var myEventListener = app.eventListeners.add("afterOpen", myDocOpen, false);
  
  function myDocOpen(myEvent)
  {
       var myDoc = app.documents[0];
      myDoc.pages.add(LocationOptions.AT_END);
  }
  

  It is important to use app.documents [0] instead of app.activeDocument when you use the afterOpen event.

  This simple script adds a new page whenever a document is open. Written and tested on CS3, windows.

  Kasyan

  P.S. I just tested on CS5 - it works here as well, but it adds two pages instead of one for a reason any.

• Run a script on the server side

  someone at - not how to run a script out server php with him sending variables or receive all the variables and not to open a new window.

  #2030 error: end of file was encountered. This is the error I get when you use this code

  What is the file php is encode flv files. He calls him self saying that all videos uploaded in the database cue list are converted. So I have download 3 videos the script takes and makes the 1st file then 2nd, then 3rd. In the flash player I get error 2030 whenever the script call it is oneself.

  If I call the script php outside of flash with a browser, it works perfectly.

  I use all kinds of variations of URLRequest and URLLoader really puzzled. Thank you flexperts.

  private function encodeHandler(event:DataEvent):void

  {

  var variables: URLVariables = new URLVariables();

  variables.fileName = has ';

  variables.fileExt = of ';

  var request: URLRequest = new URLRequest ("""http://" " + ModelLocator.SERVER + ' / scripts/videoConvert.php"")

  request.method = "get";

  request.data = variables;

  var loader: URLLoader = new URLLoader();

  loader.dataFormat = can.

  loader.addEventListener (Event.COMPLETE, completeHandler);

  loader.addEventListener (flash.events.HTTPStatusEvent.HTTP_STATUS, onStatus);

  try

  {

  //status.text = "video encoding".... » ;

  loader.load (request);

  trace() 'start encoding');

  }

  catch (error: error)

  {

  //status.text = "unable to load URL";

  trace()"coding error cannot load url");

  }

  function onStatus(event:HTTPStatusEvent):void

  {

  If (event.status! = 0) {}

  //status.text = "encoding error";

      trace('encoding error');

  }

  }

  function completeHandler(event:Event):void

  {

  //status.text = "complete encoding";

  trace(() 'complete encoding');

      }

  }

  Very well, please close this thread.

• Firefox shows "running" and pinned to the taskbar, but does not open.

  Firefox if poster on the taskbar also indicates "run" to the
  The Task Manager, but will not maximize.

  I had this problem and it drove me nuts! After a few uninstalls and make routine CCleaner which finally solved the problem was the third time I did an uninstall I ticked the box that asks if you want to delete ot your personal settings. He tells you that he will remove all passwords, bookmarks, etc.. Because I use Mozy backup moved and reinstalled Firefox ermoving as personal settings and it came without any problem. Then I restored my favorites and will go ahead and re - customize to my liking. I hope this helps.

• Pavilion15-p018nz: Windows logon screen does not display the symbol of 'the eye' to reveal a password and the right arrow (input)

  Which connection to Windows 8.1 the eye symbol and the symbol of the arrow to the right were posted up to that (I think so) after an automatic update of Windows. As I was intending to migrate to Windows 10 I na not invest a lot of research on this problem. Now, after the migration successful Windows 10 Home the problem still exists. After typing the password I can't check it out because the eye symbol is still missing and I have to press 'Enter' because of the clickable right arrow missing for the opening. All this happens with a Microsoft online account. I created an account local and with that, the symbol of the eye, but not the right arrow reappeared. Thanks a lot for help.

  Hi there @CKURT

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you want to activate the icon reveal password for your system. I'm happy to help you.

  It depends really on what version of the operating system you are running, because this kind of thing is normally controlled by using the Group Policy Editor. This tool is not a part of a home edition, you need the Pro version or later version for that.

  Assuming that you do not have a pro edition or higher, then it can be a help to you:

  5 ways to access Local Group Policy Editor on Windows 10 - isunshare.com

  Disable or enable the new feature button to reveal a password in Windows 8 - windowsclub.com

  Unfortunately, the version of Windows 10 I installed next to me is that the home edition as well, so I can't access to this, to check, so let me know if it works for you.