Script error when you start using the ActiveX API

Similar Questions

• script error when you are using the Explorer internet 64-bit

  Could you please give me a solution to the following:

  HP Pavilion dv7-3112sa Windows 7 laptop

  Printer HP Photosmart B209

  WiFi Netgear DGND 3300 v2

  When I use internet explore 64-bit and try to print, I get a "Script error" message and it will not be printed.

  It's OK on 32-bit.

  I can't update my HP software because I lose total wireless communications and have to do a restore to get it working again.

  Script errors are related to how the site behaves with a browser.

  In this case, is printing script that is having a problem and it seems to be with Internet Explorer 64-bit because it works very well with Internet Explorer 32-bit.

  See this article from Microsoft about this problem.

  You've already found the best resolution for this problem: using 32-bit Internet Explorer.

  64-bit web browsing is still a very small part of the web sites and very few fully support 64-bit, browsing experience.  I strongly recommend using a 32-bit web browser for viewing Web sites as this will give you the best compatibility as all Web sites still supports 32-bit navigation, but not all sites are fully compatible with 64-bit browsers.

• Get a script error when you try to print, and when I print the black ink is very light on the page. I replaced the ink already, it's a hp officejet 6500wireless.

  Get a script error when you try to print, and when I print the black ink is very light on the page.  I replaced the ink already, it's a hp officejet 6500wireless.

  See if this helps:

  http://support.Microsoft.com/kb/308260

  Tom Ferguson

• Script error when you try to install Flash Player 18.

  , I get a script error when you try to install Flash Player 18. The error box says "line of Script error 202 tank 13 Unable to set property"innerHTML"undefined or null references code 0 URL C://.../Downloads/flashplayer18ax_ra_install.exe/160" and "undefined" is on the screen of the installer after I closed the error box.  I'm on a Dell Inspiron, IE 11.0.9600.17843, Windows 7 Home Premium Svc Pack 1.

  I get this same error box any installer that I use for Flash Player 18.  The error box appears immediately after I launch the installer. I reinstalled flash player 17 successfully two days without problem, but of course Flash Player 17 does not now work on web sites.  I ran the Adobe flash player Uninstaller a couple of times between tries - same result, same script error box.  I've lost count of how many times I tried to install it and my fingers are raw...

  Roughly the same time the error box appears or a second or later, my Norton Insight pops up a box that says that Norton has not enough information about this program (the installation program, I guess), to recommend this program, but I don't think that it prevents the installation program to run. Or maybe it is?

  This problem seems to come from the installer of Flash Player, but I don't see anything from Adobe on this matter.  I tried running as administrator, I disabled the parts of Norton to see if it is this error source - I've searched for hours on the internet and I can't find answers.  I've never had a Flash Player update problem so far.  Anyone can understand this or point me in the right direction?   Thank you.

  Hi all

  Installer online team was interested in to this yet and the DPI setting as the culprit.  If the DPI setting is not set to 100%, 125%, 150% or 200% returns the script error.  If you are DPI setting is set to something else, assign him one of them please and Setup online should work.  The team is working on a fix for this.

  To check/change the DPI setting:

  1. Start the control panel and go to Control Panel\All Control Panel Items\Display
  2. In the left menu, select set size custom text (PPP)
  3. In the Windows Setup custom DPI select 100%, 125%, 150% or 200% in the menu drop-down
  4. Click OK
  5. Select apply
  6. Open a session/disable
  7. Online installer should now run without displaying the script error.

  --

  Maria

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

  When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

  Any ideas?

  Hi MouseToe,

  What version of Dungeon Siege you trying to install?

  The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

  Method 1: Run the disk check.

   

  Check the integrity of your hard disk for lost clusters and errors.

  To do this, follow the steps in this article: check a drive for errors

  Method 2: Defragment the hard disk.

  This improves the performance of your hard drive.

  Reference: improve performance by defragmenting your hard drive

  Method 3: Run the game as administrator.

  Here's how:

  (a) right click on the game configuration file.

  (b) choose 'Run as administrator'.

  Method 4: Try to install the game in a different folder or to a different drive

   

  Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

  Follow these steps.

  a. Insert the game disc in the drive.

  Note: Do not click on Quick Installation during installation.

  b. follow the setting menus until you see the change button.

  c. click change.

  d. in the path box, delete the existing path, and then type the following text:

  drive: \Program Files\Microsoftgame name Games\

  In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

  e. click OK when finished.

  f. follow the instructions that appear on the screen to install the game.

  This should be it.

  For more information, please visit:

  http://support.Microsoft.com/dungeonsiegeiifaq

  For additional assistance, please post your concerns at the forum below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello! I can't subscribe to creatively Cloud for photographers. When you subscribe to gives an error when you pay with the card: "order processing error occurred for more information, please contact the Customer Service by phone 8 800 333 36 63."

  Hello! I can't subscribe to creatively Cloud for photographers. When you subscribe to gives an error when you pay with the card: "order processing error occurred for more information, please contact the Customer Service by phone 8 800 333 36 63, when making a payment via PayPal: PAYMENT_CPG_SETTLE_FAILED. How to order?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  Technically, since it's the same effect with the same settings, it works on both sizes. However, you need to test both is to decide if it will appear visually correct on both screens or not. On screens more wider/taller objects can appear earlier on the screen, it is advised to test again on both screens.

  See you soon,.

  Vikas

• I get a download error when you go to the applications tab

  I get an error when I go to the applications tab, when I go to the applications tab, it says download error, please contact customer and I tried to contact them but they do not respond, I'm on a Windows 10 laptop, please help me!

  Please remove Creative Cloud app and Adobe Application manager using

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• I get an error when you start the process of windows 7 installation on ubuntu 9.04

  I'm on ubuntu 9.04 and I do not so I wanted to install windows 7 on it, but after clicking on install on Windows 7, the installation of a temporary file stops after 10 seconds with an error message:
  "Windows is unable to find a place to store temporary installation files. To install windows ensure that a partition on your startup disk has at least 685 MB of free space.   Error code 0 x 80070490

  Please help me and am using ubuntu 9.04

  You will need to repartition your hard disk, so that Windows does not recognize the file system that Ubuntu Linux uses by default (which is ext3). You can do within Ubuntu Linux using several different tools, or if you are more interested in the use of Ubuntu Linux you can repartition the disk in the installation of Windows.

  PLEASE NOTE: The following allows you to delete all the data contained on your hard drive. I can't be held responsible for any data loss that may be incurred. Please make sure that you back up your data before you run the following commands. Use at your own risk.

  Repartition the drive by using the Windows installation:

  1. Insert the Windows 7 installation in your DVD Player DVD.
  2. restart your computer and boot from the DVD drive when asked ("press any key to boot from the CD or DVD... »)
  3 Windows Setup will load, give him a few moments.
  4. When you see the installation screen of Windows 7 with "Windows Installer", press SHIFT + F10.
  5. in the command prompt window that appears, type diskpart and press ENTER.
  6. at the diskpart prompt, type select disk 0and press ENTER.
  7. at the diskpart prompt, type cleanand then press ENTER.
  8. the DiskPart utility removes all partitions on the hard drive as well as the master boot record (MBR).
  9. at the diskpart prompt, type exit and press ENTER.
  10. in the command prompt window, type exit.
  11. click on install Windows and follow the on-screen instructions.

  Kristan M. Kenney ("Nighthawk64"). My Blog: http://blog.kristankenney.com

• script error when you access The Weather Channel

  When I look at an office of The Weather Channel, I get a script error 01 and cannot be used or not, message stays there, can not close this window or minimize it even, I have to restart the computer to get rid of it, solutions or ideas?

  How I work around the script error. I right click on the icon on the task bar and leave the office. Then the weather channel again then it works. It's always a problem to process after I downloaded Java for her.

• script error when you try to play my pc game?

  I have the script error whenever I try to play one of these medical games I've purchased and downloaded from the internet. I don't know that I can do to fix it if someone could give me please an answer I would be very happy because I'm starting to get annoyed with the fact that I can't play the game and spend twenty dollars on it.

  Hi shanna2015,

  ·         What browser do you use?

  ·         What is the full error message that you receive?

  ·         Are you able to play games properly?

  If you use Internet Explorer, you can follow these methods and check if it helps.

  
  Method 1

  You can follow this link and check if the problem persists.

  How to resolve script errors in Internet Explorer on Windows computers

  Note: Article applies to IE 7 or IE 8 however remains valid for IE 9 as well.

  
  Method 2

  You can also enable compatibility view in Internet Explorer and try to play the game.

  Some sites Web may not behave as expected in Internet Explorer

  Hope the helps of information.

  Please post back and we do know.

• Adding printer series HP PSC2100 via the IP Port, type of printer does not show on the list of devices even when you are using the factory supplied driver disk.

  Installation D-Link DP-301U network home of three computers. I am able to access the printers using its IP address, Setup has worked with Vista Ultimate system but two systems of Windows XP Pro (SP3) does not Printer series HP PSC2100 list when you use the 'Disk' during installation radio button. Is there a work around or Microsoft drivers to resolve this error?

  Hello William51,

  Thank you for your message.  Try the following steps to add your printer.
  Click "Start" > select "printers and faxes".
  Click on 'Add printer' > click 'Next' > select ' local printer, and then make sure that detect automatically is disabled
  Select "Create a new Port" and the arrow down to "Standard TCP/IP Port" > click "next".
  Click "next".
  Type the IP address and click on 'Next' > 'Finish '.
  You must then install the driver/software for your device.  You can use "Have Disk", download from website, or find your model.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Script error when you try to print from Windows mail to HP1012: P3200 prints well

  I use Vista Windows Mail and have done for many years without any problems. All of a sudden when I try to print from the window of e-mail for my HP1012 I get a script error message. Printing from Windows Mail on my HP3210 still works fine.

  Any suggestions?

  IE9 is not compatible with Vista Windows Mail. Maybe that's what you see.

• Strange script error when you connect directly to a host and stopping

  Don't know why I get this error so thought I would ask everyone.  PowerCLI 5.5

  I am writing a script that stop a whole environment, hosts and vCenter.

  Everything works fine until I viserver - connect directly to the host running vCetner.

  (1) connect the correct vCenter

  (2) brings together all ESXi hosts

  (3) brings together the host that is running vCenter

  (4) includes all virtual machines and their current status

  (5) start stop VMs or stop VMs if VMWare tools is running

  (6) wait until all but the vCenter VM is running

  7) penetrates into all hosts, but the host to vCenter in Maintenance Mode

  (8) disconnects the vCenter (order of disconnection-VIServer)

  (9) connects directly to the host that is running vCenter (Connect-VIServer), enter correct details.

  Here's where I start to have problems.

  (10) issues a command Shutdown-VMGuest

  (11) waits until the VM is turned off

  (12) sets this host in Maintenance Mode (Set-VMHost-Mode of State of Maintenance-confirm: $false)

  (13) stop the virtual machine host. (Stop-VMHost-confirm: $false)

  If I unplug the vCenter I get an error if I stay connected to vCenter it works very well, it's a problem I want to turn off the vCenter and just need to talk directly to the host.

  } {Code

  SE connect-VIServer $Global: vCenterHost.VMHost | Out-Null

  Stop-VMGuest - VM $Global: vCenter - confirm: $false - WhatIf

  #Wait for vCenter be put off.

  While (Get - VM $Global: vCenter | where {$_.}) ({PowerState - don't 'Receiving'}) {}

  Game-VMHost - VMHost $Global: vCenterHost.VMHost - Maintenance of State-confirm: $false - WhatIf

  Stop-VMHost - VMHost $Global: vCenterHost.VMHost - confirm: $false - WhatIf

  } / {Of code

  Error:

  Game-VMHost: 01/01/2014 22:27:22 Set-VMHost the connection to the server

  "User domain\username @(vCenter): 443 is required by the current operation." The

  connection does not exist, perhaps because he has been actively closed or delayed

  outside.

  \Vmware-scripts\Park-shutdown-startup-test.ps1:125 char: 2

  + Set-VMHost - VMHost $Global: vCenterHost.VMHost - maintenance State

  -Confirm: $fals...

  +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~

  + CategoryInfo: InvalidArgument: (/ VIServer =(user/vCenter): 4)

  43 /: string) [Set-VMHost], ViServerConnectionException

  + FullyQualifiedErrorId: Sdk_InvalidConnectionId, VMware.VimAutomation.ViC

  ore.Cmdlets.Commands.SetVMHost

  Stop-VMHost: 01/01/2014 22:27:22 stop-VMHost the connection to the server

  "User domain\username @(vCenter): 443 is required by the current operation." The

  connection does not exist, perhaps because he has been actively closed or delayed

  outside.

  \Vmware-scripts\Park-shutdown-startup-test.ps1:126 char: 2

  + Stop-VMHost - VMHost $Global: vCenterHost.VMHost - confirm: $false - WhatIf

  +     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidArgument: (/ VIServer =(user/vCenter): 4)

  43 /: string) [Stop-VMHost], ViServerConnectionException

  + FullyQualifiedErrorId: Sdk_InvalidConnectionId, VMware.VimAutomation.ViC

  ore.Cmdlets.Commands.StopVMHost

  / Error

  I built this script a bit when the functions but have tried this outside being a function call and just do not know what is happening and why it gives me this error.

  I know that my $Global: variables are correct because it calls the correct information and like I said works without a problem, when I'm always connected to the vCenter I stop.

  Yes I know I '-Whatif "in orders, I'm testing right at that moment.

  Thanks for any help or ideas.   I tell myself that if all else fails I will post just the necessary data in a file and they have this script calls another script and gather the necessary content but would rather not do.

  The problem is probably due to the fact that you have recovered the contents of the variable $Global: vCenterHost.VMHost, while you were connected to the vCenter.

  In being VMHost , the ID property contains information about the connection to access the corresponding object of vSphere.

  To resolve this issue, 'Get' the VMHost object again when you are connected directly to the ESXi server.