Script for the Configuration DVSwitch
Hello
Someone at - it a script for the information of VDS on the level of the host which nic is connected to what uplink?
Also to remove all Exchange created in the VDS switch for the host and then recreate the exchanges as they were after the connection to the host to a vCenter diff?
Also any script to copy the resource through VCenter pools?
Thank you
Suraj Rawat
The following script will export information of VDS for uplink, the port they are in and what Teddy is used by node ESXi.
$report = {foreach ($dvSw in Get-VDSwitch)
foreach ($esx in (Get-View-id $dvSw.ExtensionData.Summary.HostMember)) {}
$proxy = $esx.Config.Network.ProxySwitch | where {$_.} {DvsUuid - eq $dvSw.ExtensionData.Uuid}
$pnicTab = @ {}
$proxy. Spec.Backing.PnicSpec | %{
$pnicTab.Add ($_.) UplinkPortKey, $_. PnicDevice)
}
$proxy. UplinkPort |
Select @{N = "vdSwitch"; {E = {$dvSw.Name}}.
@{N = "$vmhost"; E = {$esx. Name}},
@{N = "vNIC"; E = {$pnicTab [$_]} Key]}},
@{N = "Uplink"; E={$_. Value}},
@{N = 'Port'; E={$_. Key}}
}
}
$report | Export Csv C:\dvSw-Uplink.csv - NoTypeInformation - UseCulture
Tags: VMware
Similar Questions
-
Recommendation for the configuration of the disk
Recommendation for the configuration of the disk:
A wide range of RAID 5 consisting of 8 x 146 GB drives?
Two arrayys of RAID 5 with 4 x 146 GB drives in each table one would be used for the data store, and the other would be usd to images of backup to it. The idea here is that when we do backup via the script GhettoVCB/o would be mainly on the secondary RADIUS and not the main data store. In my opinion? I think I have the only RAID 5 Bay with all the readers of 8 x 146 GB for a data store single should surffice. I don't think the performance problems will be that detrimental.
Do not hesitate to offer advice on scenarios, thank you
Engineer accommodation
ModusLink Open Channel Solutions, Inc.
As written before, depends on the type of e/s.
With more than R and W low, RAID5 (on multiple disks) could be very good.
But don't forget to also use a global hot spare, degraded performance a RAID5 mode could be dramatic.
And don't forget that your controller has a battery backup.
André
-
When you attempt to connect to the VPN Aventail I get th e following in a "Connection error" message box: "you don't have enough privileges for the configuration of the connection properties. Contact your administrator. That this connection has worked before. I suspect a MS patch for breaking it. Any help would be appreciated.
We have solved the problem yesterday, by simply reinstalling the Aventail software.
I spoke to network administrators and nothing had changed, so it's quite strange.
anyway thanks a lot for your help Brian.
See you soon,.
Tobias
-
How should be written the script for the use of the maximum memory of the guest operating system ever?
Please teach the name of the object and the type and order, etc.
You should be able to do it with the cmdlet Get-Stat .
Something like that
Get-Stat -Entity (Get-VM $vmName) -Stat mem.usage.maximum -Start (Get-Date).AddDays(-7) | Measure-Object -Property value -Maximum | Select Maximum
This will return the maximum percentage in the last 7 days for the guests, whose name is stored in the variable $vmName.
____________
Blog: LucD notes
Twitter: lucd22
-
Script for the conversion of the hyperlinks to the buttons?
Hello!
Does anyone know if West a script for the conversion of the hyperlinks to buttons with the action of going to the URL with the same URL, which has been used with hyperlink?
Here it is:
/* Copyright 2012, Kasyan Servetsky November 29, 2012 Written by Kasyan Servetsky http://www.kasyan.ho.com.ua e-mail: [email protected] */ //====================================================================================== var scriptName = "Convert hyperlinks to buttons - 1.0"; Main(); //===================================== FUNCTIONS ====================================== function Main() { var hyperlink, source, sourceText, destination, page, arr, outlinedText, gb, button, behavior, barodeCount = 0, hypCount = 0; if (app.documents.length == 0) ErrorExit("Please open a document and try again.", true); var startTime = new Date(); var doc = app.activeDocument; var layer = doc.layers.item("Buttons"); var swatch = doc.swatches.item("RGB Yellow"); var hyperlinks = doc.hyperlinks; var progressWin = new Window ("window", scriptName); progressBar = progressWin.add ("progressbar", undefined, 0, undefined); progressBar.preferredSize.width = 450; progressTxt = progressWin.add("statictext", undefined, "Starting processing hyperlinks"); progressTxt.preferredSize.width = 400; progressTxt.preferredSize.height = 30; progressTxt.alignment = "left"; progressBar.maxvalue = hyperlinks.length; progressWin.show(); for (var i = hyperlinks.length-1; i >= 0; i--) { hyperlink = hyperlinks[i]; source = hyperlink.source; sourceText = source.sourceText; destination = hyperlink.destination; page = sourceText.parentTextFrames[0].parentPage; barodeCount++; progressBar.value = barodeCount; progressTxt.text = "Processing hyperlink " + hyperlink.name + " (Page - " + page.name + ")"; arr = sourceText.createOutlines(false); outlinedText = arr[0]; gb = outlinedText.geometricBounds; outlinedText.remove(); button = page.buttons.add(layer, {geometricBounds: gb, name: hyperlink.name}); button.fillColor = swatch; button.fillTint = 50; button.groups[0].transparencySettings.blendingSettings.blendMode = BlendMode.MULTIPLY; behavior = button.gotoURLBehaviors.add(); behavior.url = destination.destinationURL; hyperlink.remove(); source.remove(); hypCount++; } var endTime = new Date(); var duration = GetDuration(startTime, endTime); progressWin.close(); alert("Finished. " + hypCount + " hyperlinks were convertted to buttons.\n(time elapsed: " + duration + ")", scriptName); } //-------------------------------------------------------------------------------------------------------------------------------------------------------- function GetDuration(startTime, endTime) { var str; var duration = (endTime - startTime)/1000; duration = Math.round(duration); if (duration >= 60) { var minutes = Math.floor(duration/60); var seconds = duration - (minutes * 60); str = minutes + ((minutes != 1) ? " minutes, " : " minute, ") + seconds + ((seconds != 1) ? " seconds" : " second"); if (minutes >= 60) { var hours = Math.floor(minutes/60); minutes = minutes - (hours * 60); str = hours + ((hours != 1) ? " hours, " : " hour, ") + minutes + ((minutes != 1) ? " minutes, " : " minute, ") + seconds + ((seconds != 1) ? " seconds" : " second"); } } else { str = duration + ((duration != 1) ? " seconds" : " second"); } return str; } //-------------------------------------------------------------------------------------------------------------------------------------------------------- function ErrorExit(error, icon) { alert(error, scriptName, icon); exit(); }
-
script for the murder of session
Hello
I prepare a script for the murder of session and I use the following command to generate the script for large number of users. The syntax for the murder of the session is ALTER SYSTEM KILL SESSION * "SID, SERIAL #" * IMMEDIATE. I want my output with SID, SERIAL # values within the single quots *('SID,SERIAL#') *. can someone help me on this?
Select "ALTER SYSTEM KILL SESSION ' |" SID | «, » || SERIES # | ' IMMEDIATE '. « ; » FROM V$ SESSION WHERE BLOCKING_SESSION IS NOT NULL
Thanks in advance
Published by: 793097 on December 14, 2010 05:53select 'ALTER SYSTEM KILL SESSION '''||SID||','||SERIAL#||''' IMMEDIATE'||';' FROM V$SESSION WHERE BLOCKING_SESSION IS NOT NULL
Nicolas.
-
Script for the parameters to retrieve VM Advanced Configuration (VMX)
Need a script to retrieve advanced virtual of the configuration information for an output of virtual machines, single or multiple.
Make a right click on the virtual machine-> change settings-> option-> general-> configuration settings.
Need a script to retrieve advanced virtual of the configuration information for an output of virtual machines, single or multiple.
Make a right click on the VM-> change settings of-> option-> General-> configuration setting.
Check the settings Advanced Access Virtual Machine (http://blogs.vmware.com/vsphere/2012/03/acessing-virtual-machine-advanced-settings.html) using perl and power CLI
-
Any recommendations for the Configuration of my 801AP?
All,
The configuration for my 801AP is attached. I would like to hear all the recommendations that the forum members can have on my configuration because it is enough 'vanilla' such that it has been created from the GUI interface.
I would be grateful of any configuration suggestions relating to security, performance, signal strength, flexibility etc.. This 801AP is used in a domestic environment with consumer devices such as computers, iPhone/iPad, Nintendo Wii, PS2, drive DVD etc.
Thank you very much for your comments!
James E
Seems OK to me.
To make it difficult for anyone to guess what is your PSK make sure that mix you it with capital letters and numbers.
You can also put an ACL in your VTY to ensure that only people of a certain IP subnet (such as 192.168.1.0) can access your access point.
PS: "No encryption service? I would remove the bit «»
-
use Image catalog script for the current document
Is it possible to use the script to image catalogue for the current document in which we work instead of leaving the mark of script a new document fees for placed images?
use,
//ImageCatalog.jsx //An InDesign CS6 JavaScript /* @@@BUILDINFO@@@ "ImageCatalog.jsx" 3.0.0 15 December 2009 */ //Creates an image catalog from the graphic files in a selected folder. //Each file can be labeled with the file name, and the labels are placed on //a separate layer and formatted using a paragraph style ("label") you can //modify to change the appearance of the labels. // //For more information on InDesign scripting, go to http://www.adobe.com/products/indesign/scripting/index.html //Or visit the InDesign Scripting User to User forum at http://www.adobeforums.com . // //The myExtensions array contains the extensions of the graphic file types you want //to include in the catalog. You can remove extensions from or add extensions to this list. //myExtensions is a global. Mac OS users should also look at the file types in the myFileFilter function. main(); function main(){ var myFilteredFiles; //Make certain that user interaction (display of dialogs, etc.) is turned on. app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll; myExtensions = [".jpg", ".jpeg", ".eps", ".ps", ".pdf", ".tif", ".tiff", ".gif", ".psd", ".ai"] //Display the folder browser. var myFolder = Folder.selectDialog("Select the folder containing the images", ""); //Get the path to the folder containing the files you want to place. if(myFolder != null){ if(File.fs == "Macintosh"){ myFilteredFiles = myMacOSFileFilter(myFolder); } else{ myFilteredFiles = myWinOSFileFilter(myFolder); } if(myFilteredFiles.length != 0){ myDisplayDialog(myFilteredFiles, myFolder); alert("Done!"); } } } //Windows version of the file filter. function myWinOSFileFilter(myFolder){ var myFiles = new Array; var myFilteredFiles = new Array; for(myExtensionCounter = 0; myExtensionCounter < myExtensions.length; myExtensionCounter++){ myExtension = myExtensions[myExtensionCounter]; myFiles = myFolder.getFiles("*"+ myExtension); if(myFiles.length != 0){ for(var myFileCounter = 0; myFileCounter < myFiles.length; myFileCounter++){ myFilteredFiles.push(myFiles[myFileCounter]); } } } return myFilteredFiles; } function myMacOSFileFilter(myFolder){ var myFilteredFiles = myFolder.getFiles(myFileFilter); return myFilteredFiles; } //Mac OS version of file filter //Have to provide a separate version because not all Mac OS users use file extensions //and/or file extensions are sometimes hidden by the Finder. function myFileFilter(myFile){ var myFileType = myFile.type; switch (myFileType){ case "JPEG": case "EPSF": case "PICT": case "TIFF": case "8BPS": case "GIFf": case "PDF ": return true; break; default: for(var myCounter = 0; myCounter
-1){ return true; break; } } } return false; } function myDisplayDialog(myFiles, myFolder){ var myLabelWidth = 112; var myStyleNames = myGetParagraphStyleNames(app); var myLayerNames = ["Layer 1", "Labels"]; var myDialog = app.dialogs.add({name:"Image Catalog"}); with(myDialog.dialogColumns.add()){ with(dialogRows.add()){ staticTexts.add({staticLabel:"Information:"}); } with(borderPanels.add()){ with(dialogColumns.add()){ with(dialogRows.add()){ staticTexts.add({staticLabel:"Source Folder:", minWidth:myLabelWidth}); staticTexts.add({staticLabel:myFolder.path + "/" + myFolder.name}); } with(dialogRows.add()){ staticTexts.add({staticLabel:"Number of Images:", minWidth:myLabelWidth}); staticTexts.add({staticLabel:myFiles.length + ""}); } } } with(dialogRows.add()){ staticTexts.add({staticLabel:"Options:"}); } with(borderPanels.add()){ with(dialogColumns.add()){ with(dialogRows.add()){ staticTexts.add({staticLabel:"Number of Rows:", minWidth:myLabelWidth}); var myNumberOfRowsField = integerEditboxes.add({editValue:3}); } with(dialogRows.add()){ staticTexts.add({staticLabel:"Number of Columns:", minWidth:myLabelWidth}); var myNumberOfColumnsField = integerEditboxes.add({editValue:3}); } with(dialogRows.add()){ staticTexts.add({staticLabel:"Horizontal Offset:", minWidth:myLabelWidth}); var myHorizontalOffsetField = measurementEditboxes.add({editValue:12, editUnits:MeasurementUnits.points}); } with(dialogRows.add()){ staticTexts.add({staticLabel:"Vertical Offset:", minWidth:myLabelWidth}); var myVerticalOffsetField = measurementEditboxes.add({editValue:24, editUnits:MeasurementUnits.points}); } with (dialogRows.add()){ with(dialogColumns.add()){ staticTexts.add({staticLabel:"Fitting:", minWidth:myLabelWidth}); } with(dialogColumns.add()){ var myFitProportionalCheckbox = checkboxControls.add({staticLabel:"Proportional", checkedState:true}); var myFitCenterContentCheckbox = checkboxControls.add({staticLabel:"Center Content", checkedState:true}); var myFitFrameToContentCheckbox = checkboxControls.add({staticLabel:"Frame to Content", checkedState:true}); } } with(dialogRows.add()){ var myRemoveEmptyFramesCheckbox = checkboxControls.add({staticLabel:"Remove Empty Frames:", checkedState:true}); } } } with(dialogRows.add()){ staticTexts.add({staticLabel:""}); } var myLabelsGroup = enablingGroups.add({staticLabel:"Labels", checkedState:true}); with (myLabelsGroup){ with(dialogColumns.add()){ //Label type with(dialogRows.add()){ with(dialogColumns.add()){ staticTexts.add({staticLabel:"Label Type:", minWidth:myLabelWidth}); } with(dialogColumns.add()){ var myLabelTypeDropdown = dropdowns.add({stringList:["File name", "File path", "XMP description", "XMP author"], selectedIndex:0}); } } //Text frame height with(dialogRows.add()){ with(dialogColumns.add()){ staticTexts.add({staticLabel:"Label Height:", minWidth:myLabelWidth}); } with(dialogColumns.add()){ var myLabelHeightField = measurementEditboxes.add({editValue:24, editUnits:MeasurementUnits.points}); } } //Text frame offset with(dialogRows.add()){ with(dialogColumns.add()){ staticTexts.add({staticLabel:"Label Offset:", minWidth:myLabelWidth}); } with(dialogColumns.add()){ var myLabelOffsetField = measurementEditboxes.add({editValue:0, editUnits:MeasurementUnits.points}); } } //Style to apply with(dialogRows.add()){ with(dialogColumns.add()){ staticTexts.add({staticLabel:"Label Style:", minWidth:myLabelWidth}); } with(dialogColumns.add()){ var myLabelStyleDropdown = dropdowns.add({stringList:myStyleNames, selectedIndex:0}); } } //Layer with(dialogRows.add()){ with(dialogColumns.add()){ staticTexts.add({staticLabel:"Layer:", minWidth:myLabelWidth}); } with(dialogColumns.add()){ var myLayerDropdown = dropdowns.add({stringList:myLayerNames, selectedIndex:0}); } } } } var myResult = myDialog.show(); if(myResult == true){ var myNumberOfRows = myNumberOfRowsField.editValue; var myNumberOfColumns = myNumberOfColumnsField.editValue; var myRemoveEmptyFrames = myRemoveEmptyFramesCheckbox.checkedState; var myFitProportional = myFitProportionalCheckbox.checkedState; var myFitCenterContent = myFitCenterContentCheckbox.checkedState; var myFitFrameToContent = myFitFrameToContentCheckbox.checkedState; var myHorizontalOffset = myHorizontalOffsetField.editValue; var myVerticalOffset = myVerticalOffsetField.editValue; var myMakeLabels = myLabelsGroup.checkedState; var myLabelType = myLabelTypeDropdown.selectedIndex; var myLabelHeight = myLabelHeightField.editValue; var myLabelOffset = myLabelOffsetField.editValue; var myLabelStyle = myStyleNames[myLabelStyleDropdown.selectedIndex]; var myLayerName = myLayerNames[myLayerDropdown.selectedIndex]; myDialog.destroy(); myMakeImageCatalog(myFiles, myNumberOfRows, myNumberOfColumns, myRemoveEmptyFrames, myFitProportional, myFitCenterContent, myFitFrameToContent, myHorizontalOffset, myVerticalOffset, myMakeLabels, myLabelType, myLabelHeight, myLabelOffset, myLabelStyle, myLayerName); } else{ myDialog.destroy(); } } } function myGetParagraphStyleNames(myDocument){ var myStyleNames = new Array; var myAddLabelStyle = true; for(var myCounter = 0; myCounter < myDocument.paragraphStyles.length; myCounter++){ myStyleNames.push(myDocument.paragraphStyles.item(myCounter).name); if (myDocument.paragraphStyles.item(myCounter).name == "Labels"){ myAddLabelStyle = false; } } if(myAddLabelStyle == true){ myStyleNames.push("Labels"); } return myStyleNames; } function myMakeImageCatalog(myFiles, myNumberOfRows, myNumberOfColumns, myRemoveEmptyFrames, myFitProportional, myFitCenterContent, myFitFrameToContent, myHorizontalOffset, myVerticalOffset, myMakeLabels, myLabelType, myLabelHeight, myLabelOffset, myLabelStyle, myLayerName){ var myPage, myFile, myCounter, myX1, myY1, myX2, myY2, myRectangle, myLabelStyle, myLabelLayer; var myParagraphStyle, myError; var myFramesPerPage = myNumberOfRows * myNumberOfColumns; var myDocument = app.activeDocument; myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; var myDocumentPreferences = myDocument.documentPreferences; var myNumberOfFrames = myFiles.length; var myNumberOfPages = Math.round(myNumberOfFrames / myFramesPerPage); if ((myNumberOfPages * myFramesPerPage) < myNumberOfFrames){ myNumberOfPages++; } //If myMakeLabels is true, then add the label style and layer if they do not already exist. if(myMakeLabels == true){ try{ myLabelLayer = myDocument.layers.item(myLayerName); //if the layer does not exist, trying to get the layer name will cause an error. myLabelLayer.name; } catch (myError){ myLabelLayer = myDocument.layers.add({name:myLayerName}); } //If the paragraph style does not exist, create it. try{ myParagraphStyle = myDocument.paragraphStyles.item(myLabelStyle); myParagraphStyle.name; } catch(myError){ myDocument.paragraphStyles.add({name:myLabelStyle}); } } myDocumentPreferences.pagesPerDocument = myNumberOfPages; myDocumentPreferences.facingPages = false; var myPage = myDocument.pages.item(0); var myMarginPreferences = myPage.marginPreferences; var myLeftMargin = myMarginPreferences.left; var myTopMargin = myMarginPreferences.top; var myRightMargin = myMarginPreferences.right; var myBottomMargin = myMarginPreferences.bottom; var myLiveWidth = (myDocumentPreferences.pageWidth - (myLeftMargin + myRightMargin)) + myHorizontalOffset var myLiveHeight = myDocumentPreferences.pageHeight - (myTopMargin + myBottomMargin) var myColumnWidth = myLiveWidth / myNumberOfColumns var myFrameWidth = myColumnWidth - myHorizontalOffset var myRowHeight = (myLiveHeight / myNumberOfRows) var myFrameHeight = myRowHeight - myVerticalOffset var myPages = myDocument.pages; // Construct the frames in reverse order. Don't laugh--this will // save us time later (when we place the graphics). for (myCounter = myDocument.pages.length-1; myCounter >= 0; myCounter--){ myPage = myPages.item(myCounter); for (var myRowCounter = myNumberOfRows; myRowCounter >= 1; myRowCounter--){ myY1 = myTopMargin + (myRowHeight * (myRowCounter-1)); myY2 = myY1 + myFrameHeight; for (var myColumnCounter = myNumberOfColumns; myColumnCounter >= 1; myColumnCounter--){ myX1 = myLeftMargin + (myColumnWidth * (myColumnCounter-1)); myX2 = myX1 + myFrameWidth; myRectangle = myPage.rectangles.add(myDocument.layers.item(-1), undefined, undefined, {geometricBounds:[myY1, myX1, myY2, myX2], strokeWeight:0, strokeColor:myDocument.swatches.item("None")}); } } } // Because we constructed the frames in reverse order, rectangle 1 // is the first rectangle on page 1, so we can simply iterate through // the rectangles, placing a file in each one in turn. myFiles = myFolder.Files; for (myCounter = 0; myCounter < myNumberOfFrames; myCounter++){ myFile = myFiles[myCounter]; myRectangle = myDocument.rectangles.item(myCounter); myRectangle.place(File(myFile)); myRectangle.label = myFile.fsName.toString(); //Apply fitting options as specified. if(myFitProportional){ myRectangle.fit(FitOptions.proportionally); } if(myFitCenterContent){ myRectangle.fit(FitOptions.centerContent); } if(myFitFrameToContent){ myRectangle.fit(FitOptions.frameToContent); } //Add the label, if necessary. if(myMakeLabels == true){ myAddLabel(myRectangle, myLabelType, myLabelHeight, myLabelOffset, myLabelStyle, myLayerName); } } if (myRemoveEmptyFrames == 1){ for (var myCounter = myDocument.rectangles.length-1; myCounter >= 0;myCounter--){ if (myDocument.rectangles.item(myCounter).contentType == ContentType.unassigned){ myDocument.rectangles.item(myCounter).remove(); } else{ //As soon as you encounter a rectangle with content, exit the loop. break; } } } } //Function that adds the label. function myAddLabel(myFrame, myLabelType, myLabelHeight, myLabelOffset, myLabelStyleName, myLayerName){ var myDocument = app.documents.item(0); var myLabel; var myLabelStyle = myDocument.paragraphStyles.item(myLabelStyleName); var myLabelLayer = myDocument.layers.item(myLayerName); var myLink =myFrame.graphics.item(0).itemLink; //Label type defines the text that goes in the label. switch(myLabelType){ //File name case 0: myLabel = myLink.name; break; //File path case 1: myLabel = myLink.filePath; break; //XMP description case 2: try{ myLabel = myLink.linkXmp.description; if(myLabel.replace(/^\s*$/gi, "")==""){ throw myError; } } catch(myError){ myLabel = "No description available."; } break; //XMP author case 3: try{ myLabel = myLink.linkXmp.author if(myLabel.replace(/^\s*$/gi, "")==""){ throw myError; } } catch(myError){ myLabel = "No author available."; } break; } var myX1 = myFrame.geometricBounds[1]; var myY1 = myFrame.geometricBounds[2] + myLabelOffset; var myX2 = myFrame.geometricBounds[3]; var myY2 = myY1 + myLabelHeight; var myTextFrame = myFrame.parent.textFrames.add(myLabelLayer, undefined, undefined,{geometricBounds:[myY1, myX1, myY2, myX2], contents:myLabel}); myTextFrame.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset; myTextFrame.parentStory.texts.item(0).appliedParagraphStyle = myLabelStyle; } -
I need a custom script for the calculation in a PDF form.
I am working on a form of commissions airport rental cars with exclusions. Could someone please a custom for the following script?
R + C = less the sum of (Ea, Eb, Ec)
Thank you!
Under the Simple field of tab notation option calculate enter:
R + C - (Ea + Eb + Ec)
-
Adobe DC Java Script for the population of conditional field
I have to write a script in a form that will be contained in a text box and populated by one based on the user by checking a box
Scenario of
A form contains two sections, there are two sections Head Office information and accounts payable. The user saves the headquarters address information for example the street address, city, province, PC, etc. one moves to section 2 two to record accounts payable information. The Department accounts payable may be located to one address which is not at the headquarters. There is a check box labeled "same as headquarters" by checking the box that the user is to identify that this is the same address and I want the form automatically fill the street address, city, province, PC already filled in the section of headquarters. If the user does not identify the address is the same as the location of the headquarters, the user must manually register the information.
Is not not a technical developer I'm lost, I tried many sites. I really miss adobe lifecycle designer and the previous method to create actions. Help, please!
My JavaScript to date (sorry it must look not so good):
this.getField("Same").value;
If (Same.value! = null) {APStreetAddress.value = HOStreetAddress.value}
This kind of thing can become a little complicated depending on exactly how you want it behaves. It's simple if you only need the script that will be triggered when the check box is selected, in which case the script of mouse upwards to the box could be:
Script mouse upwards to the box
(function () {}
Do nothing if this check box cleared ix.
If (event.target.value = 'Off') return;
Copy the values from the previously filled (probably) the text for the other fields.
getField("APStreeAddress").value = getField("HOStreeAddress").valueAsString;
getField("APCity").value = getField("HOCity").valueAsString;
getField("APPostalCode").value = getField("HOPostalCode").valueAsString;
Add code to the other fields here
})();
Just be sure to use the names of real field.
-
Script for the mandatory boxes
Recently I've been editing a PDF file with checkboxes for the steps in a process. Basically, these just will be used when going through the process to check off each step individual as long as the user goes along. There was a high requirement to prevent the checkboxes of the audit until the previous one has been checked. So box 2 cannot be controlled until the box 1 have been verified, and 3 cannot be controlled until 2 is checked etc.
Does anyone could offer some advice on a script for this? My knowledge of scripting languages is quite limited, so any help would be greatly appreciated! Thank you.
Thanks for all the help.
I finally managed to find a piece of code that shows the next box hidden but also hide the check box, so that from before is not checked. Here's the code I used just in case anyone is interested.
var nHide = event.target.isBoxChecked (0)? display.visable:display.hidden;
this.getField("Check_Box2").display = nHide;
Once again thanks for the help.
-James
-
Need a script for the network card and Vswitch info
Hello
Can we have a script to list out the output of information network/vsiwtch as below for all clusters in VC to CSV. Name of host mcadress name of the physical card Vswitch name team Vswitch (NLB/FTL)
Hello
Sorry for the late reply, was absent for a few days
It's the new version:
$output = foreach ($esxi Get-cluster |) Get-VMHost | Name sort)
{
foreach ($vSS in (Get-VirtualSwitch - VMHost $esxi))
{
$pnic = $vSS.ExtensionData.Pnic - replace ".". *- » | Kind of Teddy bear
$mac_address = foreach ($p in $pnic) {$esxi.ExtensionData.Config.Network.Pnic |} Where-Object {$_.} Device-match $p} | %{$_. Mac}}
$esxi | Select-Object @{N = 'ESXi'; E={$_. Name}}, @{N = "Physical map"; {E = {[String]: Join (",", ($PNIC))}}, @{N = "MAC address"; {E = {[String]: Join (",", ($Mac_Address))}}, @{N = 'vSwitch name'; {E = {$vSS.Name}}, @{N = "vSwitch political grouping"; {E = {$vSS.ExtensionData.spec.Policy.NicTeaming.Policy}}
}
}
$output | Export-CSV "C:\output.csv".
Example of output:
ESXi: test
Physical map: vmnic0, vmnic1
MAC address: 11:22:33:44:55:66, 11:22:33:44:55:67
vSwitch name: vSwitch0
vSwitch political group: loadbalance_srcid
ESXi: test1
Physical map: vmnic2, vmnic3
MAC address: 11:22:33:44:55:68, 11:22:33:44:55:69
vSwitch name: vSwitch1
vSwitch political group: loadbalance_srcid
Hope this helps,
Steven.
-
Where is the log file for the configuration of the plugin to a vco part?
Hello
I have a vco plugin that has a configuration interface, basically, everything works fine, but I can't find the logs for the purposes of Web configuration. I thought that newspapers could be found in Server.log (in my case, the exact path is C:\Program Files\VMware\Infrastructure\Orchestrator\app-server\server\vmo\log\server.log) but they were not there.
I checked a few other plugins vCO well known as the SSH plugin, but I can't find the newspapers for his configuration interface, either.
Can someone let me know if I'm looking the wrong log file? Thanks in advance.
To the vCO 5.1 you can check in {vCO_INSTALL_FOLDER}\configuration\jetty\logs\jetty.log
And log4j.configuration I think is in {vCO_INSTALL_FOLDER}\configuration\jetty\resources\log4j.xml
-
Record WLST scripts for the card settings
Hello
I'm new to the WLST Script recording tool.
I am trying to save my settings for JmsAdapter create a new Pool of outbound connections, but the registration tool does not seem to be able to capture changes in the settings of the map file is empty after the changes have been made.
Anyone know why this is?
Is there a way make the folder working tool for the card settings?
If this is not the case, if anyone knows the necessary functions/directories in a WLST to create outbound connections Pools in the JMSAdapter settings?
Any help will be very appreciated!
Thank you
Al
JMS adapter uses the deployment plan where wlst can't save this.
The recording feature intercepts calls JMX and translated into corresponding WLST scripts, as well as features that use deployment plans fall outside the coverage area of the "Record" feature.
Best regards
Vivek Vishal
Maybe you are looking for
-
How Amazon smart search restarted my computer and how do I prevent it?
Amazon smart search has not only taken over Firefox, but Google Chrome and IE. I tried to uninstall anything Amazon other than the Kindle reader, that was installed several weeks ago. It didn't happen immediately after that I installed Firefox. I was
-
I recently hooked another monitor to my laptop, that was when the problem occurred, but even after restarting Firefox * and * my computer, it did not always work. By collapse, I mean when you press F11, the open tabs and the address bar appear smalle
-
The Lg Tablet SIM card does not fit my mini iPad 3. Do not use cell not on tablet.
-
Safari slow after update to the last El Capitan
Hello! After the last update El Capitan (April 16), Safari has been slow. For example, goes from one URL to another usually take one or two seconds and takes up to 15 seconds. First of all, I thought that my cable provider was the culprit but then I
-
I don't know much about the ipod and the computer, but that computer I use is not yet my ipod classic hanging on to her. and my ipod battery is dead. I mean DEAD. Please tell me how to do for my computer it read so I can still enjoy my ipod. I wo