Any recommendations for the Configuration of my 801AP?

Similar Questions

• Recommendation for the configuration of the disk

  Recommendation for the configuration of the disk:

  A wide range of RAID 5 consisting of 8 x 146 GB drives?

  Two arrayys of RAID 5 with 4 x 146 GB drives in each table one would be used for the data store, and the other would be usd to images of backup to it.  The idea here is that when we do backup via the script GhettoVCB/o would be mainly on the secondary RADIUS and not the main data store.   In my opinion?  I think I have the only RAID 5 Bay with all the readers of 8 x 146 GB for a data store single should surffice.   I don't think the performance problems will be that detrimental.

  Do not hesitate to offer advice on scenarios, thank you

  Engineer accommodation

  ModusLink Open Channel Solutions, Inc.

  As written before, depends on the type of e/s.

  With more than R and W low, RAID5 (on multiple disks) could be very good.

  But don't forget to also use a global hot spare, degraded performance a RAID5 mode could be dramatic.

  And don't forget that your controller has a battery backup.

  André

• You don't have enough privileges for the configuration of the connection properties. Contact your administrator

  When you attempt to connect to the VPN Aventail I get th e following in a "Connection error" message box: "you don't have enough privileges for the configuration of the connection properties. Contact your administrator. That this connection has worked before. I suspect a MS patch for breaking it. Any help would be appreciated.

  We have solved the problem yesterday, by simply reinstalling the Aventail software.

  I spoke to network administrators and nothing had changed, so it's quite strange.

  anyway thanks a lot for your help Brian.

  See you soon,.

  Tobias

• How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

  How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

  Do you know how to access the Linksys configuration screen?  Click Administration.  You should be able to access the logs from here.

  What happens if they have an older linksys router?

  

  Click on the Windows "Start" button and select "All programs." Click on "Internet Explorer" to open a web browser.

  Type "192.168.1.1" in the address text box and press "enter." This IP address is the default value for a Linksys router. If you have reprogrammed the router to have a different IP address, enter your IP address instead.

  Click the log tab

  model # here

  http://homesupport.Cisco.com/en-us/support?ICID=global-header-support-link

  192.168.1.1 is an IP address that is normally used by the routers broadbandfrom Linksys.

  If the router has an IP 192.168.1.1, you can connect by opening a Web browser and visiting

  http://192.168.1.1/

  This allows to connect you to the console of the router administrator and access its configuration screens.

  http://compnetworking.about.com/od/routers/g/192_168_1_1_def.htm

• Are there any available for the Mac Pro 2013 SSD expansion?

  Are there any available for the Mac Pro 2013 SSD expansion?

  I would like to increase my 1 or 2 GB of storage internal if possible.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

• Recommendations for the best 3D modeling App / program?

  Does anyone have a recommendation for the best 3D modeling application / program?

  (More for the creative rather than animation games and computer work)

  Thank you

  Hello

  I love Autodesk Inventor, but you need to use BOOTCAMP or VMWare/Parallels to run it because it only works with Windows.

  See you soon,.

  Adam

• IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  Sorry, but if your device is disabled and you have no backup, then you won't be able to save the data on the device:

  https://support.Apple.com/en-us/HT204306

  You should back up your device regularly to iCloud or import your photos to an application on your computer. Otherwise, you will be risking losing those photos. If your device has been lost, stolen, or crushed by your car, you'd be in the same situation. Really sorry for your photos.

  Good luck

  GB

• I need a download of software recommended for the Transcriber ICD-PX312 for Windows 7.

  I installed the software that came with the ICD-PX312 on a windows system 7 and it crashes constantly. I need a download location for the software recommended for the valid software for the Windows 7 platform.

  all links will be useful.

  Hi Tim,.

  Welcome to the community of Sony!

  Download and install the latest version of the software of the Organizer from the link below:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=ICDPX312&upd_id=8218&os_group_id=5

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Are there any drivers for the canon digital rebel eos 300 d for Windows 7

  Are there any drivers for the canon digital rebel eos 300 d for Windows 7?

  Hello

  Like you need help with the driver for Canon digital rebel EOS 300 d, you will need to contact the manufacturer of the product for the driver. According to the Windows 7 compatibility check, this particular camera is not compatible with 32-bit (x 86) as a 64-bit (x 64) operating system.

  For more information about the Windows 7 compatibility, visit this link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&s=canon%20digital%20rebel%20EOS%20300D&type=Hardware&page=1&os=32-bit

  For more information about the driver, visit this link: http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_digital_rebel?selectedName=DriversAndSoftware

  I hope that helps!

• Parallel logic LSI, LSI logic SAS, parallel Buslogic (not recommended for the guest operating system), vmware paravirtual

  Infrastructure:

  vSphere

  ESX 4

  Reference Dell R710 Server

  I install WIN 2003 x 64 as a virtual server on ESX 4, when I select LSI logic SAS & LSI logic parallel it does not detect the hard drive, do I need driver if so where can I download?

  For parallel bus logic (not recommended for the guest operating system) & Vmware paravirtual, do I have to select this option for my win 2003 R2 x 64 edition?

  Please help on this issue.

  ~ Rashid

  If you really want to use it for installation, you will need to extract the driver from the VMware Tools ISO and add it to a disk image.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Format recommended for the PDF author metadata

  Hello

  I work as a librarian and I am responsible for the Department of the thesis of my University Library. These are filed and archived as PDF files. Some of them are available online, some are not.

  I was told to systematically fill metadata "Title" and "Author" for each PDF deposited in our electronic despository.

  My question has to do with metadata "author." Is there a structure recommended for her?

  As it is I can think of a lot of different alternatives:

  First name last name

  LastName Firstname

  LastName, Firstname

  etc.

  As a librarian, my instinct was to choose the name, first name format (used in the author/creator DC element, for example), but I realized that whenever I have saved the PDF file and then displays the part of metadata (via the shortcut Alt D), it would show "Lastname, Firstname" rather than the full name (for some unknown reason, adds Adobe Pro "" ""). After some tests, I came to the conclusion that the coma was the source of the problem. So I changed my mind and adopted the format Firstname Lastname , but I'm not sure that this is the best option.

  So if I ask you a few questions, here they are:

  -Which format do you recommend for the metadata of the author (if there is one)?

  -Why a coma generates ""?

  Is there a specific separator character that I use when I need to fill two different names (if a given thesis has been written by two different people)? (this issue also applies to metadata "Key words")

  Thanks for your patience and for your time,

  See you soon,.

  JHM

  There are no rules in itself, but the XMP specification defines DC: creator as a ProperName field, which means it must be written in the way he would say - "John Smith" rather than "Smith, John". Finally, it is until you do with data - if your external search system to priority of family name, do it.

  The fields on the tab of "description" of PDF Properties dialog comes from this Document information block in the standard PDF file, which is independent of the XMP metadata. Although these fields of DI are often people will look on, in a formal catalog system the XMP object has priority (indeed, in the ISO PDF/A standard that you are supposed to ignore completely DI fields).

  Document Information fields are stored in the PDF file as strings rather than the XML entities. Commas would confuse the parser in thinking it was to see a table, so they will trigger Acrobat in order to encapsulate the entries between quotes. He will assume a comma and a single space are part of an individual term, if you want to create a list using the semicolons or several spaces between words. Senicolons conquer spaces:

  • Doe, John; Lord Lucan; Barney, the Purple dinosaur will be kept at the "Doe, John"; Lord Lucan; 'Barney, the Purple dinosaur'
  • Is no one, no one will be kept to the ', that is, not a "; person because the spacing is a term separator.
    

  The important thing to remember is that the entrance of DC: creator XMP is updated whenever you change the author field of DI, but it does NOT follow the same rules. ProperNames XMP are OK with spaces but they don't like commas or semicolons - so the first example above appears in the tree view of XMP as

  1. DOE
  2. John
  3. Lord Lucan
  4. Barney
  5. Dinosaur
  6. the
  7. Purple

  This reinforces the idea of using names as spoken. Lord Lucan has survived his trip to XMP, John Doe became two people. Barney is beyond hope. in many ways.

• Recommendations for the collection of NICs (<>- SG200 vSwitches)

  Hello

  Are there settings specific to the SG200-26 when it is used with ESXi vSwitches (in a configuration of load balancing)

  For example 2 guests, 4 network adapters per host, each NETWORK card transfer traffic from 2-3 networks VIRTUAL (junction ports)

  I am able to configure the VLANS on switches and test connectivity on individual ESXi vmnic adapters, but when I use two adapters in my vSwitch, I lose connectivity.

  I don't see anything relevant in the newspapers.

  Any recommendations? How you guys put in place of your SG200 with ESXi?

  Thank you

  Alex

  I recommend you make a static LAG. The information of what you posted in pretty task on this knowledge base.

  -Tom
  Please mark replied messages useful

• Is there any remote for the Sony Alpha a5000 physic?

  Hi I just wanted to know if there are any remote physical (not mobile phone) for the Sony Alpha a5000?

  Thanks in advance!

  Hi guillermoveitia,

  Welcome to the community of Sony!

  Yes, there is a compatible wired remote for the ILCE5000 camera. The model of the remote is RM-VPR1.

  Due to the proximity, I recommend you to visit our global website of Sony to find local stores and dealers in your area, because they are better equipped to help you further: http://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Recommendations for the Office to edit video etc

  I think it's time to spend my Dell Dimension 9200 now grumpy with Vista and buy something new.

  I'm looking for a versatile machine for usual applications, more a few video editing. I do NOT use my pc for gaming.

  For editing, I currently use Sony Vegas and Adobe Premiere. Videos I produce are usually around 3-5 minutes in length, which is more entertaining shorts as long the Hollywood blockbusters.

  I have a working monitor but if a brilliant new is included then so much the better.

  Budget: £500-1000 £ tho would prefer closer to the £500. However, I'd rather spend a little more for performance and durability.

  Any recommendations?

  Black Friday is a great time to be looking for some good deals on systems. While there may be several nit pickiness to go with it (I'm absolutely nit picky when it comes to choosing a system), I would recommend something along this & 699 line: http://www.dell.com/us/p/xps-8700/pd?oc=fddngx312&model_id=xps-8700

  Essentially, I would recommend 8 GB of RAM and a processor i7 for video editing. You can get away with an i5 and 4 GB of RAM, but apparently, you want something to last you a certain time (considering your continued use of the 9200). So, the linked system will be a good e ' balance and one that will work for a while. There is also a version with a monitor included for 899, but systems are essentially the same.

  I also highly recommend that you buy the extra warranty and accidental coverage. If you, like me, need a system to last for a while, it will exceed the year warranty or suffer from liquid damage and warranty and accidental coverage is awesome. I saved thousands of dollars because of plan coverage warranty and accidental emissions of Dell. I have children, and my system takes a beating. My system would survive better to be hit by a train at the hands of two boys. Ive replaced the entire system. each party and some parts more than once and apart from the cost of the warranty plan, it costs me nothing.

  I hope this helps :) Let me know if you have any other questions and be sure to check the other black deals Friday. The system that I recommend is a high-end, but there are other options available.

• Cisco recommended for the GRE VIA IPSEC router.

  Hello world

  I intend to connect our two remote locations via IPSEC tunnel, looking for the cheapest option available for the router options.

  Do you have any good recommendations?

  Have a nice weekend!!

  Very appreciated

  Hello

  There is 1 that I love so much, it's 892fsp of Cisco.

  It has 8-port switch, you can make l2tp vpn, free will, love, ips, zbf...

  I hope this helps.

  Thank you

  PS: Please do not forget to rate and score as correct answer if this answered your question