Scrolling image layer question

Similar Questions

• How can I control setting multiplied between status object box & static box w / scrolling image: Folio

  I am trying to find a way to control the InDesign object "multiply" effect layer between a Black w / box state object transparency (which turns out as a transparent grey rather than black) and a static area w / scroll image with the same effect (which turns out correct transparent black dark, rich) parameters? I'm working on an iPad app "Folio" CS6. Thank you in advance!

  Blend modes are not supported overlays of static objects.

  Bob

• Grid scrolling Image on Mobile

  I'm new to Flex and have been involved in some tutorials that I managed to find in the wek spent more or less. I was thinking to create a mobile application as a test project to enhance my knowledge.

  I have a few questions: -.

  1. I want to create a grid of scrolling images for mobile. Maybe 1 column or multi. The source of the images could be an API call or keep it simple an arraycollection of objects collection containing the image title and image url. Can someone please show an example.

  < s:ArrayCollection id = "imageList" >

  < fx:Object imageTitle = "Test 1" imageURL="resources/1.jpg"/ >

  < fx:Object imageTitle = "Test 2" imageURL="resources/2.jpg"/ >

  < fx:Object imageTitle = "Test 3" imageURL="resources/3.jpg"/ >

  < fx:Object imageTitle = "Test 4" imageURL="resources/4.jpg"/ >

  < fx:Object imageTitle = 'Test 5' imageURL="resources/5.jpg"/ >

  < fx:Object imageTitle = "Test 6" imageURL="resources/6.jpg"/ >

  < fx:Object imageTitle = "Test 7" imageURL="resources/7.jpg"/ >

  < fx:Object imageTitle = "Test 8" imageURL="resources/8.jpg"/ >

  < fx:Object imageTitle = "Test 9" imageURL="resources/9.jpg"/ >

  < / s:ArrayCollection >

  2. what resources (sites Web/books) would you recommend so I can devote myself seriously mobile Flex programming ensuring my Foundation is good.

  IconItemRenderer should be able to accomplish this use case, for example:

  labelField =""

  iconField = "myIconField" iconWidth = "140" iconHeight = "140" / >

  Note that you might want to extend IconItemRenderer and override drawBackground() to change how separators/borders are drawn.  It will be a little easier in 4.6 with the introduction of the method of drawBorders() by SDK-27737.

• additional options for scrolling images

  I was wondering if there are plans to add features like easing and scrolling through a set number of pixels to scroll images?

  Are not currently

  Neil

• Try to make the simple disk image layer after doing the double layer image

  Hi all

  I wonder if you can help me.

  I just made an image of DVD double layer of a project and he created a 7 GB file. Now, I would try a simple disc image layer 4.7 GB, something I did with an earlier version of this project, resulting a watchable drive on a smaller TV.

  After 7 GB image, still don't make the 4.7 GB version but I don't understand why.

  Martyn

  Check these 2 things:

  Right click on your 'active' movie and choose "return to the original. This still allows transcode again at a rate less than fit on the smaller disk. Yet fortunately keeps your first version until you tell her to not to do so.

  The tab generate, have you changed the size of the disk (under 'disc info')?

• &amp; lt; Beginner &amp; gt; Scroll image gallery

  can someone help me understand why my site isn't a gallery of loading external images? the tutorial I used can be found here:
  
  http://www.oman3d.com/Tutorials/Flash/imagegallery/
  
  they made the image gallery is entirely with actionscript and it works in the .swf to the Gallery, but as soon as I call it to be loaded into the .swf House, it does not. Here is the link to the homepage of sites:
  
  (oh and don't worry, I know that the photos are pixelated and some need fixed things, I'm just trying to get the site working first)
  http://lightboy101.110mb.com/bootleg/splash.swf
  -Here is the Gallery-
  http://lightboy101.110mb.com/bootleg/Gallery.swf
  
  If anyone can help me, please let me know. or if you know a tutorial with a better scroll image gallery, that would be great. Thank you.

  This is the case. to fix, replace Stage.height and Stage.width with stageH and the stageW, the RESP and hardcode them the correct values for these variables.

• Not able to pause/resume a scrolling image

  Hi all
  
  I wrote a post re there try to pause/resume a scrolling image a few days. I still have the problem that keeps development. I have attached the code snippet and be grateful for the help please. If the image is replaced by a text string, the methods to pause/resume work. I walked through the code with the debugger and the methods are called, but it's not yet to stop scrolling!
  
  Any help is highly appreciated or code suggestions, for example, on a better way to do it. Thank you
  
  Cheers!
  
  DaveJ

  This is a more elegant solution. Get rid of the callLater() calls entirely and use a timer to invoke the effect of movement:

  
  
  http://www.Adobe.com/2006/mxml"creationComplete =" initApp () ">"
  import flash.utils.Timer;
  import flash.events.TimerEvent;

  [Bindable]
  public var speed: Number = 5;

  private var myTimer:Timer;

  private function initApp (): void {}
  myTimer = new Timer (1, 0);
  myTimer.addEventListener ("timer", Moveimage);
  myTimer.start ();
  }

  public function changeSpeed (): void {}
  Speed = speedSelector.value;
  }

  private void moveImage(e:Event):void {}
  myMove.end ();
  If (theImage.x > c1.width) {}
  theImage.x = 0 - theImage.width;
  }
  myMove.xTo = theImage.x + speed;
  myMove.play ();
  }
  ]]>

  
  
  horizontalScrollPolicy = "off" width = "100%" >
  
  Height = "100".
  Width = "100".
  mouseOver = "myTimer.stop ()" "
  mouseout/mouseouthandler() = "myTimer.start ()" "
  />
  
  
  
  
  ID = "speedSelector" snapInterval = "1" tickInterval = "1" liveDragging = "true".
  change = "changeSpeed ()" / > "
  
  

  HTH,
  Matt Horn
  Flex docs

• W/scrolling CF image gallery question

  It is probably the less of a concern for anyone at this stage, but instead of documentation and best practices, I thought I'd ask anyway.  Maybe someone from Adobe will be able to answer.  I think I have eaten every tutorial available on the internet and have not come across this yet.

  As far as I can tell that the variables are not readily available at FC (although MXML might solve that), so I don't know how to build it.

  I am designing a photo gallery, in which images can be the object of a scroll, fainted in out, or something by clicking a button NEXT and PREVIOUS.

  The problem is to know what image is visible at any given time.

  I was able to do this by creating a separate State for each image, then "onclick" - switch to the next (or previous) State.  It does not work perfectly, auto-generated code to make the transition is a little off and then when I go to manually tweak, I just make it worse.

  I guess: is the best way to do it or there at - it a simpler way?

  OR I try to use CF to inappropriately?  Initially, I saw FC as an alternative to learning Flash (I tried for months - seriously), but I realize that the main purpose of the CF appears to be like a high design tool and Flash Builder is intended to inject functionality and add design FC in the workflow.

  We should not see FC as an endpoint?

  Hi there - in the current version of the CF, using States, transitions and interactions you do is the main method we have for the construction of what you try to build. Over time, we want to add more capacity to "generalize" the parts of your design so that they can be reused without manually manage all cases - data lists are a prime example of this, but they do not solve your use case in their current form.

  We have also got a lot of comments on the management of the timeline and looking for ways to make it easier to manage multiple timelines and effects.

  Thank you!

  NJ

• Specialized and custom vertical scrolling image problems.

  I need to create a page of "scrolling credits" portrait in my film, but I can't use the standard of 'credits' tools, as the wording must be of a certain size, fonts, colors and style to match the other images in the film.   I created a 'page', tour credits in a program of the editor and that I imported it into my film assets.   However, when I try to insert in my film, it appears very little first - fitting himself up to the screen.   I then use the ' applied Effects > Motion' then position it tool to enlarge up to adjust the WIDTH of the screen, so that the top of the page "" is visible in the position "start".   I then use ' effects fx > Vertical Image pans to make pan my 'page' to make words seem to scroll to the top down.

  After three attempts so far, I've been making registration b very low resolution, (b) jerky and erratic scrolling movement and (c) not start or stop in the right position.   Not only that, it seems to be draining a lot of processing capability of Adobe Premiere Elements, so that it remains at a standstill, and I have to keep waiting for every order to settle and take effect before I can hit the next button... !

  Does anyone have ideas how I can fix this annoying problem that keeps to the top of my project in full?

  sparkoparkes

  What version of Premiere Elements, what operating system?

  What is the predefined project that you set for Premiere Elements project? You (manually) or project (automatically) been setting the preset project to match the properties of your import.

  Which would seem to not address most of the problems - in other words, create your import to have the same resolution as that of the creation of the project.

  As to apply an effect to roll on your document of credits created outside the project, are you using fx = Presets effects and scrolling vertical Image pans?

  Instead, please review the keyframes of the property found Position as applied effects tab/Applied effects Palette/Motion Panel expanded and position the property.

  Please review and give more information. Questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• need to gather image layer properties

  Hello

  I posted an earlier question, if I need to be more specific.

  I need to collect the anchor from the bottom of a layer of the image position (value of y) on a psd document, so I can resize the size of anchor (y) background psd Center main to match.

  Once more, any info is greatly appreciated

  This will get the boundaries of the layer.

  var LB = activeDocument.activeLayer.bounds;
  Alert ("Top =" + LB [1] .as ('px') + "low =" + LB [3] .as ('px') + "Line =" + LB [2] .as ('px') + "Left =" + LB [0] .as ('px'));

• Scrolling image graphic

  Hello

  I would like to be able to add annotations (for example, short pieces of text) to specific locations on the waveform graph.  For example, I want to label "Peak1', 'Peak2' etc.  I would then these annotations to scroll/zoom with the chart (horizontal scrolling in particular).

  I've attached a screenshot of how I would like to-labels (A, B, C, D) must scroll with peaks corresponding when I scroll through the chart.

  I could convert my graphics a pict, and add annotations to the image; but is there a more elegant way to the features of the label directly on a waveform graph?  (Added complexity - the chart has several plots;) I don't mind if my annotations are associated linked one or all (or none) plots, as long as the annotations are displayed in the right place).

  Thank you for your ideas!

  Paul

  Hi PaulHDear,

  I would say more than you could ever use in a graph

  Kind regards.

• Image in question on the shipment of gold

  So when we send the image to dell gold should have the driver's cab or just the .wim? Send us a hard drive, when we finished, but I was wondering if we need to restore the image or with the taxi driver. We have 2 different models, we are ordering a latitude 3440 and 7020. At least he can to put both of these cabins of driver on that hard drive.

  Hi Prescotta-

  Thanks for the question.  Everything what you send to Dell is the WIM image was created and captured by the Image toolset help.  The Dell factory process allows to detect the model of system order you and inject the latest drivers for your 1st boot image production.

  In summary, the Image toolset help will create a system image Windows Sysprep (which has unattended installation you selected during the process) that can be redeployed to the Dell for several types of model plant and the chassis.  Reference Dell will always ensure that you have the latest drivers for the platform that you order.

  Tyler

• Image layer not be created properly.

  I created a multi layer image that will be used to automatically generate a detailed with static overlays, glow, and drop shadow image. Something is not right. I have a total of 4 layers, 2 are real images, 2 are generated images.

  Order (from top to bottom):

  1. Overlay
  2. Solid color hidden object
  3. Also hidden sized RGBA image
  4. Drop shadow

  The shadow overlay and drop have alpha transparency, the other two are supposed to but something does not work on them. #2 never seems to get alpha so I end up losing #3 and 4.

  I will return to this problem later, the next part, is that even if everything I do is draw the layer pre-created, static and shadow scope, the images are "lost". The correct result should be a white square with a drop shadow, the result is a distorted, chopped up, partially missing a white square with no shadow. A different overlay that has glow is also applied to the shadow of origin, this is like a picture very and hardly anything can be seen with the exception of the shadow.

  The two generated images appear not at all. The first generated image is a Bitmap with alpha that gets put on the scale using the function Bitmap.scaleInto 5.0 running the Lanczos algorithm. This image is hidden that shows only a part of the image. The second generated image is a solid color and generated (fillRect) who has the same masking application made to it. The two appear when drawn individually. They come out like images in white as well.

  I hope you will understand this and I don't confuse you.

  In summary:

  • Something is causing a white drawing/clearing of the background of the image.
  • The image does not appear, so I don't know if the update the scale or masking works.
  • The object of solid color does not appear, so I don't know if masking works.
  • Static images get serverly distorted and messed up.
  • All images are (supposed) to have the alpha value and the resulting image should have transperency.
  • All have been tests with the Eclipse plugin 1.2, component Pack 5.0.0.25, on the Storm 9550 Simulator (with code very useful hot swapping).

  OK last issues resolved. Initially, I tried to make a manual loop to hide the images but thought it would take too much time

  I thought because of the permeable white background problem that it didn't work. I also thought about this loop has been the cause of the white background so I started looking for an alternative, see rop and gave it a try. Who did not much matter what I did, so I worked on static images.

  I am of those who work, I realized that rop was working, but not in the way I wanted to. So I went back to the loop and that worked.

• I have photoshop cs2. I would like to add or insert a jpg or gif image/image layer in photoshop created with the "Rounded Rectangle tool. How would I do that?

  

  The background photo/image is a layer

  I would like to add the image/photo of this layer to the white layer that has been created with the tool "rounded rectangle", and then delete the background layer and you end up with an image/icon with corners rounded

  Turn on your background layer to a regular layer by double clicking on the thumbnail in the layers palette.

  Then add a vector mask to the layer by going to layer > vector mask > reveal all the

  Then set the Rectangle rounded to path tool and draw your Rectangle on the vector mask.

• Workflow / Image Resizing Question

  Hoping someone can help me with a question of image resizing.

  
  

  I want to start an online store. I wish I could sell the same image on a t-shirt and a poster. I'll probably use Print will print/performance. They require the images to print at 300 dpi and be sized correctly. Thus, an image to print on their standard t-shirt (12 "x 16" (1.333:1)) must be 3600 x 4800 pixels.) ") To be included on their greatest poster (24.5 "x 36.5" (~1.5:1)), the same image should be 7350 x 10950 pixels.

  
  

  If I set my camera to produce a larger image, I get 6016 x 4000 pixels (~1.5:1). To maintain optimum image quality, I think I should treat this image in PS to create a main folder. I can then Downsample to create a t-shirt 3600 x 4800 image and pace to create a larger image and posters.

  
  

  Alternatively to pace process first of all, the image of the poster, and then downsample from there, in the image of t-shirt 3600 x 4800 pixels. This seems like it might be problematic.

  
  

  Another alternative would be to cadence to the poster image, downsample the image of t-shiirt, and then process each image separately. To optimize the images CMYK will print requires, I will probably need to do a separate processing (twisting) for each image in any case, but do completely separate treatment for each image is a lot more work. Any advice?

  When you use Image pro script processor you source image file should be your camera file. Here's the best pixels you have for your image. All image output processing start with these pixels for each file will be saved...  Your output image are always interpolated from these pixels.  You don't have to resize the image, you can save the Pixels camera provides.

  The way of working scripts of image processors are. They open an image source file in a document. Duplicate this document and treat the fooled until what he records and produces an output file for the document. Then he closes the dupe and repeated the dupe and process until all output files are saved to the image processing. Then the script closed the original document, that it opened without saving it.  The script then move to the next image file to process.  When all output images are only save the last open image document is closed and the script is done.

  You can include an action for each file in output production, The Image these action begins by still isn't the pixels of the source image and image that was treated for other output files. You can have the action executed before or after any resizing you do not have the script.  Once again, resize is optional.  You don't have to do the desired resizing script, you can if you want to perform the resizing in the actions that you use in the treatment of the output image.

  There is no problem in maintaining its quality. Quality only depends on how you treat the pixels of the original source image to preserve the quality that you first for each output image...

  Photoshop menu File > Automate > Image Processor Pro... Here the dialog box, you will see

  

  Very flexible, you can save as many image files that you need for each Image processing.