SD Card damaged / disassembles constantly

There are two days my SDCard not mounted himself and would not respond. I turned the phone off, removed the battery and reseat the card. It is the 8 GB pre-installed card that came in my phone. I had never even removed my battery cover. It did not work, I kept getting the notification not mounted and then he says that the card has been damaged. I have a 2 GB card for my previous phone that I had deleted all the data. I put in the phone and formatted. This worked OK for about 24 hours, and then he began to do the same thing as the 8 GB card. Once again, I turned off the phone, pulled the battery and reseat the card. It works a little and then start again. I've had this phone for 28 days. I was out of town when this problem started and it was very awkward.

Since the same problem occurred with two different cards, I'm leaning toward the phone being the issue.

If someone has had this problem and have you been able to fix it yourself?

Hi, zachattack112

I would definitley just call them to receive a new device or go to your local store. Also, your phone should not power cycle as it does.

Tags: Motorola Phones

Similar Questions

  • Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

    This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

    I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

    I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

    Pics:

    PCMCIA slot

    The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

    Wireless network card

    Wireless network card; It is a little damaged but it still works.

    Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

    Hi Steve

    Well, I can give t well you not answer how you can just remove the PCMCIA slot.
    There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
    Please check this specific device. Perhaps you have overlooked a few screws.

    But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

    Good luck

    Good bye

  • Lenovo ZTE A2107 pny micro SD card damaged

    I'm new to this forum so I don't know what to say really, but I'll try to give as much information as possible.

    Recently, I bought a micro SD 8 GB of PNY card with an adapter card. I slipped the upper part of the back of the stand upward and inserted the micro sd card into the slot labeled as SD when I put in, I noticed that when I went to ride it, it would not rise and gave me an information message to me that my SD card has been damaged. I removed the micro SD card and put it inside the adapter, then inside my laptop. It starts very well and was fully functional. I tried to format FAT32 and put once more, this return to the inside of my ZTE, who informed me that it has been damaged. I took it back and did some research. I found nothing that really coresponded with my situation, because it works not only in the stand. I tried to format it NTFS and exFAT. None worked. I also tried to format directly from the stand, but to my dismay, after erasing the SD card it informed me that my SD card has been damaged. I am at a loss for what to do, and I don't know who to ask.

    For your informationm I have not updated my Lenovo ZTE yet, I'm downloading the upgrade of system now.

    I found the solution on my own, I updated the Tablet and reformatted to FAT32 SD card. Thanks to you all.

  • transfer files from your old computer with video card damaged to new computer

    my old computers video card is damaged can not read anything on the monitor. I want to transfer files to my laptop. Old computer has windows xp new computer has windows vista. I can do this with just an easy transfer cable?

    Hello

    Put the hard drive from the old computer in the new computer as a 2nd drive. Or turn the player
    in an external USB enclosure. Or the other must allow you to access the files.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Re: Satellite X 200 - 21 p - card damaged VGA?

    Hello everyone,

    After 3 years, my laptop has undergone with a graphics card problem.

    One day after the other day it did not work. It started with 3 beeps (more soft + stronger beeps louder +, there's a second pause between beeps) then it does nothing, just the screen remains white (or black). When I turn on the computer, power led, hdd led and logo by satellite are turned on, but later hdd led turns off.

    After the left and right look in the net, I fould it has a graphics card problem. Toshiba Germany and Belgium, I was instructed to contact www.dynafix.com for my laptop repair.

    That the warranty is over, all the fees I have to pay myself now. Its really unfair that, after more than 2500 for this laptop, it not lasted longer than other laptops cheaper (I mean it there are other laptops that are less than 1000 and they work perfectly, even after 5 years).

    In any case, I have to fix it now so I would like to know how much the card cost to replace? What do you think, is it better to fix it or just buy a new laptop? (probably not Toshiba again).

    Thank you for any input.

    Kind regards

    SG

    I don t know where do you live and how much is mainboard (including the graphics card) in your country. Use google and check if you can find an online store and ask for prices.
    When I need new or already material used parts most of them I buy through eBay. Last week, I bought a graphics card for my old Satellite M70. I get it for 15 euros.

    I put t really know what to say. If you can get the motherboard for a good price, you can replace it and continue to use your laptop satellite. Otherwise, sell on eBay, and buy new laptops.

  • iMac late 2014 fusion player card damaged partition

    Some time ago, I was about to create a new partition on my new iMac 27 ", end of 2014, retina, with a fusion drive consisting of a 120 GB SSD and a 1 TB HARD drive with this * new disk utility.

    Frozen in the middle of the utility process of disk and since that time has arrived the following:

    The new partition has been appearing as the only part of the training of any merger, i.e., not the entire HARD drive was mounting, but only the newly created partition.

    Tools, no matter what start volume of repair anything.

    Any attempt repair with this useless disk utility has failed, as well as with other applications.

    Any attempt to find tips to apply a valid terminal command failed

    While I was extremely fruitful to retrieve any number of posts on the Web who have complained of the effect even of this * disk utility.

    (Similarly nothing but trouble with this braindead SIP, Apple makes me more crazy, I'm just angry!)

    What is someone is able to refer to a solution of this unacceptable situation?

    This procedure is a diagnostic test. It makes no changes to your data.

    Please triple - click anywhere in the line below on this page to select:

    { diskutil list; echo; diskutil cs list; } | pbcopy

    Copy the selected text in the Clipboard by pressing Control-C key combination.

    Launch the Terminal application integrated in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

    Wait for a new line ending with a dollar sign ($) below what you entered.

    The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

    The Terminal window does not display the output. Please do not copy from there.

    If any personal information appear in the output, anonymize before posting, but do not remove the context.

  • Case with cards

    I have two cards microsdhc (for different types of material audiobook) and can buy more.

    I think to do something to protect my rocket especially when I'm travelling.

    So, how is it easy to take the case off and put it back on every time you change the map? Would be a hard case or a flexible skin better and they get damaged by constantly put to the vote and taken off?

    I hope that someone tried and can give advice.

    Cheers.

    exegnomad wrote:

    I have two cards microsdhc (for different types of material audiobook) and can buy more.

    I think to do something to protect my rocket especially when I'm travelling.

    So, how is it easy to take the case off and put it back on every time you change the map? Would be a hard case or a flexible skin better and they get damaged by constantly put to the vote and taken off?

    I hope that someone tried and can give advice.

    Cheers.

    The silicone skin that I have has an opening for card, if that helps.

  • Portege 3480CT: cannot use the 16-bit PCMCIA card

    Hello

    I had a problem with a PCMCIA card (new media wave jammer, 16-bit) on a 3480 with Win98 & XP.
    The card appears as an unknown device in the "remove hardware" - tool.

    In Device Manager it does not at all appear and Windows did not ask for the driver.

    It looks like a card damaged, but still, this card works fine in another laptop!
    The problem could be related to different areas of memory used by the Cardservice.

    The Cardservice of the 3480 ct seems not be configurable.

    What can I do?
    Thank you

    Hello

    The PCMCIA card doesn't need a driver!
    To my knowledge, you must check the settings in the BIOS!

    On the second page of the BIOS, you should try to change the configuration of device for all devices and in the section of PC card, you must set the controller to Cardbus/16-bit mode

    then save the BIOS settings.

    Maybe it helps

  • Network card stops working

    After a storm, the network card stops working.
    Re-installed windows hardware Manager after restarting the system, but it is not working properly.

    It connects to the network, but it does not send or receive packets of data.
    The MAC address has been changed by the windows hardware Manager and the orange card light is constantly on, even if I remove the network cable.

    Hello

    > MAC address has been changed by the windows hardware Manager
    It is unlikely because to my knowledge the MAC address is fixed and cannot be changed.

    You said something about storm for me that this is a reason why the network adapter does not work correctly.
    It is perhaps short circuit on the motherboard
    I put t think this could be fixed in the easy way so you should contact a technician who could check the laptop to solve the problem of LAN card

  • HP G62 Notebook PC: Completely disable the secondary graphics card

    Hello

    I have a HP G62 Notebook PC that I bought a couple of years back. The problem I have is that the graphics card of (the age AMD) to the secondary address has been damaged by hardware components (probably due to multiple disconnections of power and unexpected stops). Everything else works fine. This problem is causing Windows to keep crashing through the blue screen, or not to display a picture at all after the Windows logo while booting. I managed to install Ubuntu on it and the operating system detected the damaged graphics card and worked around it (aka he turned off the power to the graphics card damaged and worked only using the Intel graphics card). My question is, is it possible to turn off the graphics card AMD to turn completely (from the BIOS maybe) so that I can re-install Windows and work on it using only the graphics card Intel?

    Please help, I'll provide more information if necessary.

    Please identify your laptop with its full product name or product number. You gave only a partial identification so far. I need I can take a look at the BIOS Simulator to see if it was possible there.

    Never mind providing the number or name of producty. I worked around it.

    I just took a look at the BIOS Simulator and found that there is no option to turn off the graphics card it. You may be able to work around it by removing the card.

    You can also replace the card with a card of the same work to find the switchable graphics feature. You should be able to find one to an online vendor at a reasonable price. If you don't feel able to do it yourself, then you can have the replacement carried out by a store.

  • Update video card cancel my current warranty?

    Help please. .

    Laughing out loud

    It violates the warranty unless you install PC card damage.  Which would be determined on inspection of the desktop PC will receive if it is sent in-warranty service.

    If you go back to your office for warranty work, note that must return the PC to its original state.

    Any upgrade of the desktop is a risk you assume.

  • Equium M50 - 164 acute fan noise

    Everytime I open Windows Media Player or watch a website with macromedia/flash points the fan on my laptop makes a constant high pitched noise. Performance is not affected. After the closure of media player or Web site open the noise stops. I ran directx diag tool, during the program execution the high-pitched noise returned, who ceases once more on closing the program.

    The noise is really irritating, especially when you try to work in a quiet room.

    What is a directx problem or my fan/graphics card damaged?

    I recently had the hard drive replaced by PC World.

    Any help would be greatly appreciated!

    Hello

    The fan is operating normally or it lights up when you launch these programs resulting from the noise. If it is turned on constantly, but running at low SPEED, then when you play these file types kicking at the speed higher and made these noises, I would say that the fan is defective and must be replaced. Take the computer to your nearest service provider and let them take a look.

    Chances are when it is running normally that low revs are not deployed noise. But once he goes to the next level and really starts to expel some rpm and makes noise, it's because of some bearings dry in the fan.

    I hope this helps you.

  • NO WIFI

    Hi, I have a problem with my old macbook aluminum unibody late 2008 model (el capitan), it there is no way to find the "WIFI" icon on the status bar, also when I open 'report system' and made scroll to "Wifi" cela it as information shows:

    Then when I go to 'System Preferences' > 'network' there is no WIFI option to choose...

    Is my airport card damage? or is there a way to reinstall the driver from the airport for my model of macbook late 2008 el capitan running? I hope someone could help me... Thank you in advance...

    Are you sure there is only a card installed Wi - Fi that works? If not, then he is dead and must be replaced. If you actually use 10.11.3 as shown in your profile, you can try this: download and install OS X El Capitan 10.11.6 Combo Update.

  • Constant system beeps

    Hello. I have an Acer Aspire T120E-8870. It starts fine but once the card mother bleeps constantly loads of windows as a firefighter. I tried to disable beep in Device Manager, but they always sound. What could be wrong? The beeps appear to meet the CPU fan when it runs faster than normal. I changed the fan, but to no avail. I found online if there is a continuous beep hi-low that this is due to the overheating of the CPU. In the bios it says it's a 23deg healthy.

    Hello

    ·         The beep come from internal speakers or external speakers?

    The beep is emitted by an internal speaker and is a bios error code to help diagnose the problem that you are experiencing.

    BIOS codes are given in short and long beeps. Ex: 2 short beeps long 1
    This code is different for different Bios manufacturers. You must find the manufacturer of your Bios Chip Bios and go to their web site to get the codes and their meanings.

    Once you get the meaning of the code, you know what is causing the problem and can take steps to fix it.

    I suggest you to contact Acer support:

    http://support.Acer.com/us/en/default.aspx

  • Help! Need to find a way to replace components of Lenovo Ideapad U300s!

    I bought a new 5 GHz Intel Centrino wifi PCI-E card to replace the 2.4 ghz card that came with my Lenovo Ideapad U300s. Unfortunately, I can't access the PCI-E location to Exchange on the chip. I can disassemble the laptop and go to the bottom of it, part but the PCI-E slot are available in the part superior of the laptop (which is the upper part of the PCI - E slot is directly under the keyboard, but I can't just to disassemble the laptop from the bottom).

    Someone else had this problem? Looks like it might be impossible to swap the PCI-E card without disassembling the laptop world. Thoughts?

    Hi Johnny bananas,.

    U300s Service training video...

    http://Lenovo.f.relayware.com/content/CourseWarePublic/6581/player.html

    Please Note: only approved Lenovo wireless cards will work (white list).

    http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-and-Z-series/Z580-Don't-accept-my-new-intel-6235-wifi-card/...

    Zehn

Maybe you are looking for

  • I want those last Pages back! I hate having to do it again when I get an automatic redirection page, because I can't choose how many pages I want to go back.

    V 3.6.17 has a drop down to the right of the back and next button called 'recent pages' bring BACK! When I go to a page that auto redirects me to another page, the only way to return to the page, I've been on before hand must be able to choose to ret

  • Faces no display photo icon

    When on the faces, I select a face, but the next screen shows some of the photo mode icon. But if I select one of the empty icons, the photo will appear. Someone else had this problem?

  • cannot add media elements to docs Pages

    Use Pages to create a large document - a book - and can not find a way to add photos and montages. I updated the current application of photography and the images imported from Photoshop, but when I click on the media, there is no evidence to add. MA

  • Bluetooth microphone seems quiet

    I was really convinced that the problem was with my Bluetooth headset, but after you test it with another phone and my PC (in both cases, the Microphone works fine) I can only conclude that my Droid Mini is the problem (also I realize that this is th

  • How to save on multiple audio tracks?

    I'm going by Apple Logic help to try and learn how to use it.  I am currently in the recording section, learn how to record on multiple tracks at once.  Here's what helps: Save on multiple audio tracks at once Do one of the following:Choose file > Au