'Search (Ctrl + F)' crash CD player after validation (Windows 10)

Similar Questions

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• Computer crash - blue screen after installing windows updates

  After you have installed Windows updates waiting on the computer earlier this week, we were not able to get the computer working again.  We were asked to back up and restore the factory settings, which we did.  It instructions update you Windows. When we download the updates it crashes again.  Does anyone know if there is a problem with one of the recent updates that we should avoid so that we our computer working again?

  Hello

  Since you are quite sure this is an update to the source of the problem I want to troubleshoot using this method.

  Control Panel - Windows Updates - upper left settings - set to download but allow you to install them.
  To operate the system and see if there are problems.

  If no problem try to apply updates in small groups or even one at a time, depending on how
  There are many. Beware especially of driver updates that may be older that you have or
  those even incorrect.

  ---------------------------------------------------------------------------------------------------------------

  These can help to solve the problems of update.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ============================

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Media Player - after installing Windows Media Player 11, which is not properly installed, can I roll back to WM9?

  After you install Windows Media Player 11, which does not properly get installed, can I roll back to WM9?

  Hello

  -You get an error message?

  I suggest you follow the steps in this article to uninstall Windows Media Player 11.
  http://support.Microsoft.com/kb/934372/en-us

• Cannot change the location of the RIP file in Windows Media Player after losing Windows Home Server

  I got my place to rip on my windows-based server that had catestrophic failure. So I went to another WHS that I have. But since then, I could not change the location of the file rip in my Media Player.

  It seems that the problem is that it fails to find the location of the old server, gone, when I switch to tab EXTRACT music in WMP options. I say this because it take a long time to draw only a tab. And when I click the button change under music Rip to this place, it does nothing. I get no errors, but nothing happens. It is as if I never pressed the button. There is no delay or anything. And I can go and do other things immediately.

  How can I convince Media Player than the location should not be verified so I can put a new location to rip music to?

  Hello

  Thanks for the reply. I tried the steps you recommended. But unfortunately, it has not changed the problem.

  However, she, it was pretty clear that something of the old MSS was always in the way. You could tell by the delay that made the selection of menu. So I went in MP, to organize - manage the music library. And sure enough, still listed as the default location is the old MSS. I've selected and tap on delete. Without delay, he removed and automatically changed the default location to a local drive. Problem solved! Now I can put my location of rip at ESM again and all is well again.

  Thanks again for your help.

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• Search Protocol host crashed in windows vista

  Hi did a scan with mr fixit, and he said that my windows search protocol host has crashed, and my search index keeps crashing. Iwent into index and the beginning, did stop, I tried the reset, I couldn't delete the search index or search Windows and then restart the computor wouldn't let me even if I am an administrator. Anyway is there anyone who knows, or has had this problem. Something that makes sense would be appreciated.

  Thank you

  Hi marvinappleby,

  ·         What exactly happens when you try to reset/rebuild search index? You get the error message?

  ·         Remember to make changes to the computer, after which the issue started?

  I suggest you to download and save the following Microsoft Fixit then run as administrator and check if it helps:

  Fix Windows Search when it crashes or shows no results

  How to enable an application to run once with a full administrator access token in the UAC?

  Also, take a look at the following links:

  You do not find the files when you are looking for a Windows Vista-based computer, even if the files exist on the computer

  Improve Windows searches using the index: frequently asked questions

  I hope this helps.

• crash dump: 0x000000E, persists after reinstalling Windows

  Original title: crash dump

  I have Windows Vista and became the blue screen "flush" with the msg of 0x000000E.  I ran antivirus.  No viruses.  I was getting that 6 to 7 times a day.  Today, I did a system restore and no mistake.  Finally, I backup everything (I thought) and let the system restart from the beginning.  I have the basics on the computer on which it was loaded with and I got a crashdump again with the same message.   What should I do?     Help, please.   I also wonder if I get this "crashdump" fixed, can I easily switch to Windows 7 since Vista or should I stay with Vista.   Thank you!

  Hello

  You certainly don't want to try to upgrade to Windows 7 while having this kind if problem.

  Check with the system manufacturer, their documentation support online and the drivers and their
  Forums (if any) for the known issues and solutions possible.

  ---------------------------------------------------------------------------------------------------------

  Since you returned to the original installation, which excludes many possibilities of software.
  Material is always possible of course.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other). Don't forget to look at the CAUSE - who
  be all that caused the BSOD or a Windows component, which resulted in error
  by something else.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  BCCode: 0E 0x0000000E<-- read="" this="">
  * 1029.html http://www.faultwire.com/solutions-fatal_error/no-user-mode-Context-0x0000000E-

  ==================================================

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  --------------------------------

  Maybe need of these:

  You want to manually update the BIOS, drivers from the chipset of low level and important device driver.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Organize music files in Windows Media Player after extraction.

  Whenever I ripped a cd with Windows Media Player, all the titles of the songs are all in the right order and therefore not in the right order, why? I use Windows Media Player after all to get the missing information from the album. So why do this?

  Track one becomes track 2 and 5 becomes 7 then what happens? And I tried to edit myself as well but every time I click Update album info it just messes up amel!

  Actually, it's funny how it never used to do that before.

  Hi haslam,.

  When you rip (copy) the tracks on a CD, Windows Media Player attempts to identify songs on the CD by connecting to Internet and search of the database of Windows Media, which is run by Microsoft. In most cases, the player is able to retrieve information of media of the database online and then add the information to the files Windows Media Audio (WMA) or MP3 which are created during the ripping process.

  Check the settings of the library in windows media player. Steps to follow:

  a. open Windows media player

  b. click on organize

  c. Select Options, select the Library tab

  d. under automatic updates media for files, overwrite all of the missing information, must be deselected

  You can check the link for more information about the same: Add or edit media information in Windows Media Player:http://windows.microsoft.com/en-US/windows7/Add-or-edit-media-information-in-Windows-Media-Player

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 12 on Windows 7 stops working after recovery from sleep mode

  I have problems to make Windows Media Player 12 to run correctly after a system sleep (standby). It works very well after the maximum boot and for as long that the machine is not going mode sleep. It is only a problem with Windows 7 and Media player 12. All other Win 7 applications seem to work correctly. The system also works very well for Vista/Media player 11.

  I installed my upgrade Windows 7 Home Premium x 64 as a new installation on a separate hard drive. This problem exists right after installation - no other software not added. I then installed all the updates MS available and the problem has not disappeared. I installed the OS a couple of times (including a copy of Windows 7 Professional x 64) on another hard drive too and the problem remains.

  Media Player 12 works perfectly until the system goes into sleep mode - either by itself, or manually. When it resumes, Media player launches, but when you try to play something, he will only play the first couple notes of music and then freeze. Same thing with videos - it will get the first couple of frames played, and then hang. If you continue to stop and restart Media Player, eventually it will be totally suspended and after a few minutes the error "Server execution failed" message. At that point in the Task Manager, wmplayer.exe will consume is a complete base my Quad CPU (25%), do nothing. Sometimes, you can kill the process and take control of the back of the PC. Other times it crashes completely and the only thing you can do is to shut down the PC.

  Media Player 11 under Vista Home Premium x 64 on the same PC works fine. I was never able to get Media Player 12 in Windows 7 to work properly after a standby/on standby. If I reboot, everything works fine so it seems to be that something related to a problem of sleep/recovery.

  HP supports suggested restarting the service WMP network sharing.  That has not helped, but if I stopped and set to manual start, Media Player would play the sound/music but not video of several tests.  But if I stopped and began to WMP 12 a few times more the problem returns.

  Well after working with the help of HP for several days, it seems to be something between the video card and card mother / BIOS between them.  At start-up, everything works well, but after the exit mode ensures, hardware diagnostics show a failure of local video memory.  Media Player is finally touched by it.  Doesn't a lot of sense to me that this does not happen under Vista, Win 7.  You have to return the PC to HP for diagnosis/repair.

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• Windows 8 - can't burn the disc with Windows Media Player after you refresh the PC as well.

  Original title: cannot burn, was ok and then nothing, has had this problem for a week now, redrawn, changed registry, tried everything?

  Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi, Dorian,

  Thanks again for your response. Really, I apologize for the inconvenience caused to you.

  You can try these methods to solve the problem.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) press Windows key + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  If the problem persists, use method 2.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

  Thank you

• Question about sort after validation

  Hello!
  I have a view object. I put in "order by clause" some sort (in the tab query this object to display). I created the jsf page and dropped this display as a table object. Also, I gave up a posting as button operation. When I change a value in the line and press validate, does not my 'order by clause' on the view object and I get unsorted data. When I press Commit the second time, performs a "order by clause. Can suggest you how to bypass this "Commit" behavior?
  JDeveloper version 11.1.2.2.0
  
  I thank the of to get answers.
  Best regards, Stanislav

  Hello

  Perform execution after validation. You can do this by running the two actions in the actionListener validation button. Search this forum to find out how to perform the action of support of bean binding.

  Arun-

• Mail crashes 2 seconds after the beginning

  Mail crashes 2 seconds after the beginning

  -Mac Book Pro retina

  -Captain El OS - X, last updated 7 June

  -Apple Mail, Update June 7

  The problem cannot be resolved. Restart of OX - X does not help.

  Try this:

  Exit the Mail.

  In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

  ~/Library/containers/com. Apple.mail

  Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

• My pc crashes every time after updateding or play a game like worlds of war crartf and I ran a full scan and no theats ideals?

  My pc crashes every time after updateding or play a game like worlds of war crartf and I ran a full scan and no theats ideals?

  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.

  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx

  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.