Search entries that exist in the two directories - please help

Similar Questions

• is it possible to see EVERY folder and file that exists on the drive hard on one screen and in one place just as you could do in much older versions.

  OK... so I had an accident and there was good and bad news... the good news is that I was able to get it started and running "Save", but the bad news is that instead of giving a new image system clean (as I expected), I had a bunch of random pictures and other unimportant things and many important things seems lost but I think that its still all somewhere.

  now... to the front sometimes there was a windows program called "windows explorer" that would put all folders and all files that was on the hard drive on a single screen, and you can search through them.    When I shoot to the top of the Explorer windows on win 7, I get a page with a bunch of files minor that some things in them, but not what I see already...

  so... my question is simply "is it possible to see EACH file and a file that exists on the drive hard on one screen and in one place just as you do in earlier versions.    I did some research and went thru records that he will show me but I explicitly want is to see EACH file and folder that exists on one screen...

  is it possible in win 7?   and if so, how, please

  Steven

  Steve,

  Are you talking about the Windows Search function?

  In Windows Explorer, open the top-level folder that you want to watch in [C:\Users\yourusername\Documents or whatever it is you want] then look in the upper right area - there is a white box to the right of the address bar.  This is the search box.  Type * and then pause and it lists all the files in this top-level folder down through its subfolders.

  You can find more information about using Windows Search in

  A Guide to using Windows Search; Two Alternatives to Windows - Wiki

• Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is back different physical storage

  Hello

  I am new to vCenter Server, so you can assume that I'm missing something obvious.

  I installed vCenter Server 5.5 and one of the two hosts of re-usable ESXi 5.0.0 connected correctly. When I try to connect to the second 5.0.0 ESXi host, I get the error message:

  Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is supported by different physical storage

  I Googled it and found what I think are the best answers that are successful, but they all seem pretty unique in their situation (they have a cluster, I do not have) etc. Some solutions involve disconnecting the store of data and reconstruction of things. I would not make things worse and can live without doubt with the help of vSphere client (and not the web client) until maybe I can start again with a 5.5 installation to a new host once I have back up everything from the host unconnectable. I closed all the VM on the host of the second. I have put in maintenance mode. I've renamed the data store, all to nothing does not.

  Thanks in advance

  The problem is that a whole army could not be connected to vCenter due to the problem, the solution involving disconnection of the host apply.

  Here is how I solved the problem:

  1 use the client vSphere client heavy, connect you to the host that cannot not be connected to vCenter Server.

  2. click on the host computer, and then click the Configuration tab.

  3. click on "storage".

  4. find the offending on the right data store.

  5. right click on the data store incriminated and click 'remove '.

  6. click on 'Add storage' in the top right.

  7. follow the steps to find this data not mounted store. I gave him a new name just to be sure, even if it's probably not necessary.

• Where is he, a search feature that appears in the Adobe Content Viewer?

  Where is he, a search feature that appears in the Adobe Content Viewer?

  Transferred to DPS forum.

  DPS does not have this feature without jumping through a bunch of hoops HTML.

• How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help

  How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help

  Jackin salvation,

  Welcome to the Microsoft Answers community.

  When resizing of volumes in Windows7, you must be aware of the following criteria:

  • Only you have the possibility to reduce or enlarge NTFS or RAW (unformatted) partition using Windows 7 tools.
  • When you shrink a partition, files not movable as a page file or a shadow storage area are not resettled. This is why you cannot reduce the size of the Windows beyond volume where these types of files. If you need to reduce the volume, you will need to remove, move or delete the page file or the shadow first storage area, and then reduce the volume and then add the page file or shadow storage on the disk area.
  • If enough bad clusters are found on the disk partition will not shrink.
  • You must be logged on to an administrator account in order to resize Windows Volumes in windows 7.
  
   

  Windows 7 Partitions or Volumes of shrinkage

  This section shows must shrink a Windows volume or partition. To do this, we must open the Windows 7 disk management tool. The following steps will guide you in this process.

  1. Click the button on the Start Menu in the bottom left of your desktop , and then click the Control Panel menu option.

  2. When Control Panel opens, click on system and Maintenance category.

  3. When opens in system and Maintenance category, scroll down and click on Administrative Tools.

  4. Double-click the computer management icon. The console of the computer management will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.

     
  5. Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'm going to resize the partition E: of 16 GB so that when completed, there is a 8 GB partition and provides another 8 GB of free space I can use for other purposes.

     
  6. To shrink the partition, just click with the right button on the partition that you want to work with and select reduce . In this example, I click right on the E: partition and in the menu that appears, I select shrink.

  7. A screen similar to the one below appears. This screen indicates the size of the current partition you, how you can reduce it to a field where you can enter a specific amount to reduce, and then how big partition will be once it shrinks. By windows 7 default enters the maximum amount that you can reduce the volume, but if you want to change this amount, do so by entering the amount in MB in the enter the amount of space to shrink in MB: field. When you are satisfied with how windows 7 will shrink the partition, click the minimize button.

     
  8. Once windows 7 is complete decreases the volume, you will be in the disk management screen, but now the partition size will be the size you requested as shown below.
  

  Now that you have reduced the size of your volume of Windows, you can close the computer management console.

  You have now finished reducing your score and you have the extra space available for use as required.

  Windows 7 Partitions or Volumes extension

  This section shows that you must extend a Windows volume. To do this, we must open the tool of disk management where we can resize our volumes. The following steps will guide you in this process.

  1. Click the button on the Start Menu in the bottom left of your desktop, and then click the Control Panel menu option.

  2. When Control Panel opens, click on system and Maintenance category.

  3. When opens in system and Maintenance category, scroll down and click on Administrative Tools.

  4. Double-click the computer management icon. The computer management console will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.

     
  5. Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'll extend the E: partition so that it uses the rest of the available space on the disc 1.
     
     
      
  6. To extend the partition, he just click right-click on the partition that you want to work with, and then select the Extend option. In this example, I click right on the E: partition and in the menu that appears, select Extend.

  7. A wizard appears as shown below. Press the Next button to continue.

     
  8. A new screen, shown below, is displayed allowing you to select the free space available on your local hard disks that you can use to extend the space of the selected partition. It is important to note that Windows 7 allows you to extend a volume using free space on the same drive as well as the other disks. I strongly suggest that you do not extend a volume on a disk with free space of the other. It is because if one of the disks has a hardware failure, then all data on this volume will be removed. Rather just to use the free space on a drive that contains the volume you extend
     .

     

     As discussed in step 5, for this tutorial we are going to extend my 8 GB partition (drive E :) to the total size of disk 1 using all the available space. As disk 1 is only available free space on my computer, windows 7 automatically select as shown in the image above and use the maximum amount available to extend the partition. If there were other drives with free space that they have shown during the selection available . If you want to extend the volume to a lower amount you can change in the Select the amount of space in MB: field. In the contrary case, press us the button Next .

  9. You will be now be presented with a confirmation screen. If you are sure you want to extend the volume, press the Finish button. Otherwise, press the back button to make changes or the Cancel button to cancel this operation.

  10. Once Windows 7 completed to extend the volume, you will be on the screen disk management, where you can see the amount that you have extended with the new size. An example of this is shown below.
  

  At this point, you can close the Management window of the computer that your task is completed.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  Hello

  Please see the thread: https://forums.adobe.com/thread/2028937?start=0&tstart=0

  Kind regards

  Shelly

• My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help

  My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help

  When you ask a question you will need to provide some basic information

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• has had to restore my laptop and now it won't let me download photoshop 10, any ideas tell me that adobe reader is not supported please help

  has had to restore my laptop and now it won't let me download photoshop 10, any ideas tell me that adobe reader is not supported please help

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  Drive install https://get.adobe.com/reader

• I bought a stock image and I can't seem to upload the image under a license without the watermark? Please help

  I bought a stock image and I can't seem to upload the image under a license without the watermark? Please help. When I download the image is the watermark, excuses that I'm a novice, the Image is listed as a license in my library

  Connect to Adobe Stock and you will see at the top right must look like this...

  

  Click on the "Images" button This will take you to the history of the license.

  

  Click on the thumbnail of the image to go to the image details page. You will see a download link. You must use the download link or add it to your an application project management libraries like Photoshop, InDesign, Illustrator, etc, to use the image without watermark.

  

  I hope this helps. :-)

• I just started using dreamweaver cs5 and image width = "3507" height = "2480 appears correctly on my page how to solve the this.someone please help

  I just started using dreamweaver cs5 and image width = "3507" height = "2480 appears correctly on my page how to solve the this.someone please help

  I played around the waist ut still not put the page to display properly

  The time has come to show us the code. It is best done by providing a link to the site, if you could post the HTML code and CSS here for us to have a look on.

  What you did until now, is an image that is limited in its container, a container that is much narrower than the width you are aiming for.

• We have made a purchase of the gems on the Cammand of Star Wars app.  Although us have been billed double and no has not yet obtained the gems.  Please help.

  We have made a purchase of the gems on the Cammand of Star Wars app.  Although us have been billed double and no has not yet obtained the gems.  Please help.

  Contact iTunes supports http://www.apple.com/emea/support/itunes/contact.html for assistance.

• HP 15 ac189tu not find the bluetooth device please help me

  HP 15 ac189tu not find the bluetooth device please help me

  PLEASE HELP ME

  Mr President

  I found the solution

  I have install MS 72552.exe

  & his departure find device

  Thanks for supporting.

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• The administrators password was interrupted due to a separation of the employee, now I have as an administrator. can't make the necessary changes Please HELP

  The administrators password was interrupted due to a separation of the employee, now I like admnin. can't make the necessary changes Please HELP

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

  Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

  

  See my response in audition 3 error with installation