Search for and select

Similar Questions

• Y at - it an option to search for and remove emailaddresses double?

  I moved all the emailaddresses to an address book, now there are a lot of double addresses... I want to delete them. Can search for thunderbird and remove double addresses?

  Try this add-on:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/duplicate-contact-manager/

• vCAC 6.1 Catalogue right - cannot search for or select users or group?

  I want to install vCAC 6.1 from scratch and try to entitle a group of users for my first article in catalog.  When I'm on the Administration > catalog management > rights tab and type "domain admins" ordomain\domain admins"to search for a user I just get"no data to display.

  

  I thought that my source of identity was the issue then I double checked that...

  

  And the strange thing is that I can seek this identity store when I'm under Administration > groups

  

  I don't know why I can't find users and groups above, but I can look for them in the admin > groups option.  I have been stuck on this for about a day and can't get anywhere.  I restarted the identity goes, the vcac goes and the iaas server.  The logs will show that nothing is wrong either.

  I was walking around videos from youtube by Yves Sandfort.  I watched all the videos of the series and followed, but at 10:08 in the video, I get to a stopping point.

  VCAC VMware 6.0 - based hypervisor Blueprint by Yves Sandfort - YouTube

  I am new to vCAC so I could have done something wrong.  I hope that its simple.  Let me know.  Thank you!

  
  Joe

  Just make sure, but domain administrators have user rights in the Group of companies to ensure that this right is?  If they have not so you will not be able to grant them rights to this right.

• How can I search for and work in the card module without losing my selection

  I'm going through my old photographs which predate the geolocation and adding my best guess as to their sites via the card module, but I'm frustrated.

  My biggest fear is selections.  In the library module, I look at and find a set of photographs that were taken at the same place and I select them.  I then go to the card module and move found, sometimes look, the place where the photographs were taken.  Now I'll return to drop the selection in the map and... OH NO.... There is no selection.  Double angst is I click back in the library and I scrolled to the beginning of my group of photographs.

  Deselect photos is the biggest mistake of the UI that Lightroom is making in this sequence.  I wonder if there is something I can do to avoid it being may have a second method of a quick temporary group of photographs.

  The other related question I have, is if someone has a suggestion of how to mark these photos as the type of GPS data.  for example, it could come from the camera, it could come through a trace log, or maybe it's just my best guess.  Maybe it is already possible to determine.

  When you find the photos you want to taken in one place, select them, then put them in a quick Collection (press B)

  Select the quick Collection, then go to the card with the film Module running. You will then be able to work ONLY with this series of photos that are taken in the same place

• What happened to search for and replace special characters

  I'm a recent update of FrameMaker 9 FrameMaker 11. I use several notations with nonbreaking hyphens and nonbreaking spaces. In version 9, I was able to use the hexadecimal codes in the Find/Replace dialog box and search and replace these ratings. Now in version 11, it does not find these characters. I end up getting more I want.

  For example: I want to find

  (E Vote, September 12, 2008)

  This text has a non-breaking hyphen and showing spaces are nonbreaking. When I entered the document these characters, I used the combination of keys "Esc hyphen:" for the hyphen and "Ctrl + space" for spaces.

  When I enter "(E\x15Vote\x10Sept.\x1012,\x102008)" and press the button Search, FrameMaker converts the text to "(E\+Vote\s#Sept.\s#12,\s#2008)" and refers to a "Not Found" statement. I get the error even if I copy the text and paste it into the Find/Replace dialog box. I tried with "Deal", "use wildcards" and whole-word checks both market. I can't find it.

  Honestly, I never noticed if verstion 9A made the conversion of \x15 to------+ and dialog of \x10 to \s#, in the search/replace because he always found what I was looking for.

  I hope someone can tell me how to solve this problem, because it is a feature I use all the time in FrameMaker. I use hyphens and nonbreaking spaces everywhere in my documents.

  I also reported this as a bug because that's what happens if feels like to me. I went out and updated my installation of FrameMaker, thinking that this may have been reported and already corrected.

  A sad FrameMaker user

  Chris

  I'm not sure that's what you're looking for, but you might.

  Copy your text ' E-voting, September 12, 2008'.

  Go to Find/replace

  Select text and character Formats Clipboard from the drop-down

  Click on Search.

• How can I search for and delete all files transferred to double

  I have double the files transferred from another computer, as well as data in my phone WM6.5 double and photos from my camera in double.

  I am on Windows 7 and looking for a way to compile, sort out the duplicate a lot of files, I created over time, by many safeguards.

  I have several Vista computer files, multiple files of phone WM6.5 and several photos of the camera.

  64 - bit Operating System

  P350 Duo CPU @ 2 GHz

  Toshiba

  4.00 GB RAM

  Hello

  Here are several free utilities and they have all their benefits and their methods.

  Auslogics Duplicate File Finder is the MD5 search engine that allows you to find duplicate
  files content, without worrying other matching criteria. It would be useful, for example, when two
  identical mp3 tracks or video files have different names
  http://www.Auslogics.com/en/software/duplicate-file-Finder

  find and delete the duplicate - free
  http://www.easyduplicatefinder.com/
  Versions Installer and Portable

  Search files in doubles or similar - even binary - free
  http://www.Joerg-Rosenthal.com/en/antitwin/

  quickly find all the files in a folder and its subfolders - free duplicate
  http://www.Mindgems.com/products/fast-duplicate-file-Finder/fast-duplicate-file-Finder-about.htm

  Duplicate File Finder - Smart Port Forwarding - TCP Port Scanner - TCP Port Tunnel - multi-minuterie-free
  http://www.brooksyounce.com/

  Duplicate File Finder software (pictures, mp3, iTunes)
  http://www.Moleskinsoft.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How to search for and remove text in the Arial Narrow font?

  Hello

  I wonder if someone can help me with a problem.

  I have a great CS5 ID doc (Win 7) that has thousands of lines in the following format:

  Example: reach, reach to yari togemasu (togeru)

  In each line the first, or the words is in English all formatted in Arial Black. then, there is a space followed by words in a foreign language (in the Japanese case). These words are all in Arial condensed format.

  I would like to be able to delete all the words automatically formatted in Arial condensed (Japanese words).

  There should be a way to do that in FIND/REPLACE, but I don't see an option to find words in a specific font and then delete them.

  Can anyone suggest how this can be done automatically, so I can't do the manual removal?

  Thanks in advance for any help that anyone may be able to offer.

  Jane.

  What version of InDesign are you using?

  If you go to find the change

  Then let empty 'Search' and ' change to ' white

  Go to the 'FindForma' t and insert the font that you want to change

  Do not fill in 'Change of Format'

• Search for and change all the bug after his conversion to Authorware 7

  A few months ago, we went from Authorware 6.5 to Authorware 7

  I have problems with a 6.5 converted to Authorware 7.0 file. I tried to convert the file again after the first compact 6.5 file. I tried it again after the Authorware 7.02 update, but still the same problem.

  The bug affects "search".

  If I get " : " and replace everything by ": " 

  i.e. get cites two spaces OR and replace by quote single space OR

  There is no problem of search and replace in 6.5, but version 7 search text 16 characters to the right of the correct text, it is not change because it would produce a syntax error.

  Using 'Find in calculation' correctly identifies the first occurrence of

  quote two spaces OR

  Another example, if I get a variable named Mode, the first, several items are correctly identified, but ultimately it incorrectly highlights text.

  I tried in both XP & Vista, with similar results. Obviously, editing is a nightmare, because of global change, I now by clicking next several times, check that the correct text has been detected before the election change the code.

  I copied and pasted the calculation containing cites two spaces OR, a spreadsheet Excel and got the Ascii code all 9000 characters. The lowest recorded value is 32, half, I expect a non-display less than 32 character could be the cause of the error.

  Could find no mention of this error on the forum, I contacted Adobe. They kept me 15 days pending then lift the query at a higher level. For two months, they have ignored every week queries asking what was going on.

  This was their response, if any.

  Monday, November 30, 2009 1:34:07 AM PST
  Hello Tom,
  
  Thank you for providing your information.
  
  We wish to inform you that there is something on the text in the
  calculation, as saved from Authorware 6.5, which is not Authorware 7
  as. The only way I found to stop this is to cut and rebonding of
  calculation script in Authorware 7. You may need to check that
  the find command is highlighted before you apply the changes, and when he sees a
  problem like that, you have to copy / paste for this calculation. We
  were afraid of us can't see another way to stop this, and like Authorware's
  is not developed, there is no engineering team we can point to.
  
  For additional assistance, please contact us at the Support Web Portal:
  www.Adobe.com/support or you can use the following on support options
  the Adobe Web site:
  
  * The user-to-User Forums where you can enter your problem or
  desire to see if another user of Adobe can offer advice. Access to this
  resource address www.adobeforums.com.
  
  * The Support Knowledgebase, which contains solutions to problems
  that occur on the assumption of the operating systems (<>) and products of <>).
  
  Thank you Adobe chossing.
  
  Abhishek

  I have never been a fan of Adobe, even before they took from Macromedia and abandoned Authorware. Their terrible support strengthens my opinion of them

  I asked Adobe if it is possible to convert in 6.5 (but no answer).

  Any suggestions?

  Looks like you have found the solution that could make the search and replace works for good. "Diving code", I mentioned at the top of the queue showme is a calc that is attached to the card. Open one of the showme files and double-click the = at the top left of the map at the top of the page. You can only paste a calc icon in your file. I'm not sure that your solution works for every situation... for instance if you replace the SPACE BACK by RETURN, then he could not correct the problem, if there are lines with several spaces at the end... Here again - maybe using GetCalc and SetCalc will be Authorware re - compile the Calc and fix the problems of every search and replace.

  Mike

• How can I search for 'È' and 'Ä '?

  Hi all

  I'm triying to match a name with an expression...

  allowed characters are: a - z A - Z 0-9 space /:,? ( ) . ' + - (you know... ISO Latin)

  In addition, it allowed the German letters Ä Ö Ü a o u ss

  Then...

  I tried this:

  Select regexp_replace (' GRAND-DUCHY OF LUXEMBOURG-DIRECTORS ', ' [^ A-za-z0-9 /:,------?------(\)------.------"------+-------] ',' *') twice;

  I get this:

  GRAND-DUCH * LUXEMBOURG - * MINIS

  (Note that fumes from the D and the space after A and E)

  If I try this in order to allow the A:

  Select regexp_replace (' GRAND-DUCHY OF LUXEMBOURG-DIRECTORS ', ' [^ A - za - z0 - 9 A /:,------?------(\)------.------"------+-------] ',' *') twice;

  
  

  I get this:

  GRAND-DUCHY OF LUXEMBOURG-ADMINISTRATIVE

  (does not work)

  If I try this:

  Select regexp_replace (' GRAND-DUCHY OF LUXEMBOURG-DIRECTORS ', ' [^ A-za-z0-9 /:,------? \ (\)------.------"\+\-a] ',' *') double;

  
  

  I get this error:

  ORA-12726: unparalleled support in regular expression

  Please... help!

  What is the expression of exact match?

  I explained it to the filling, but you don't read don't you.

  With Spanish nls_sort E and is included in the range of A to z weather if you change nls_sort in binary or write letters explicitly (as long as there is not [: ascii:] charcterclass in Oracle.)

  Select

  regexp_replace)

  "GRAND-DUCHY OF LUXEMBOURG-ADMINISTRATIVE.

  ,'[^ ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzz0-9:,?] ().'' +Ä-]'

  , '*'

  ) res

  of the double

  UE4

  "GRAND-DUCH * LUXEMBOURG - ADMINISTRATIVE.

• Search for and manually remove subscribers of BC

  I am wanting to remove several subscribers to several mailing lists.

  Is this possible without having to scroll through the countless pages of different lists?

  We often get around a dozen people who send by post and say "take me off your list" rather than managing their account.

  In order to remove them, I have to do the following.

  1. Choose the first list of e-mail to a large number
  2. change the display to 50 address dropdown
  3. Click on address column to sort alphabetically
  4. Scroll down until I found where enamel would be
     1. If there, remove
     2. If it is there, take her on a different list or they actually unsubscribe as well as send the email to you unsubscribe

  Tens of thousands of email addresses and several lists, it takes a lot of time.

  Is there a way to simply enter a search, then delete?

  The only way I could see at the moment is to export, excel find and remove then re - import. Don't really want to do this well.

  Thank you very much

  Hello

  In Admin, go to CRM > Search and of Correo electronico user research. Any user to subscribe to a mailing list is transformed into a CRM client. Once you find the contact, open and go to "Subscriptions" and uncheck the corresponding list (all subscriptions will be listed on top, under 'List of campaign')

  Kind regards

  Alex

• [CS4 JS] Search for and replace text by nothing

  Hello

  I have the script according to which seeks a Word and changes to an entire sentence to a paragraph style. I also want to remove the word I'm looking for. When I use changeTo = ""; It will not change because my value is nothing.

  Script:

  var myDoc = app.activeDocument;
  
  replaceTxt();
  
  function replaceTxt() {
  
     app.findTextPreferences = NothingEnum.nothing;
  
     app.changeTextPreferences = NothingEnum.nothing;
  
     app.findChangeTextOptions.wholeWord = false;
  
     app.findChangeTextOptions.caseSensitive = true;
  
     app.findChangeTextOptions.includeMasterPages = false;
  
  
  
        app.findTextPreferences.findWhat = "[Kop] ";
        
        app.changeTextPreferences.appliedParagraphStyle = myDoc.paragraphStyles.item("Kop"); 
        
        app.changeTextPreferences.changeTo = "";  // value is nothing so no changes???
  
        myDoc.changeText();
  
    
  
     app.findTextPreferences = NothingEnum.nothing;
  
     app.changeTextPreferences = NothingEnum.nothing;
  
  }
  

  Sjoerd

  Sjoerd hoi,

  That's right - the same behavior is in the interface. If you find the text and put nothing to change, the text is deleted. However, if you find the text but put only formatting in change, the formatting is applied and the text is not deleted.

  To actually remove the text, you have two options. First is to clear changeTo after your myDoc.changeText (); order and launch the changeText again - that's how I would do it in the interface itself.

  A little more advanced would be to use the result as changeText() table; Returns, but (1) I couldn't make it work, and (2) it is very probably the most quick to execute the command changeText twice.

• In the context menu, I want to always search for using Google dot CA, not dot COM

  I already edited "keyword. URL"about: config that has failed to display the context menu when you highlight a term to search for and use the" Google search for...»

  This works for typing the search term directly in the URL address bar, but not research in the context menu.

  I have already selected Google. This example uses always dot com for the resulting search page that opens, I wanted to have it open with google dot ca.

  I just discovered this module of MyCroft Project

  Course to the bottom of this page, number 5, is the Google.ca search bar . Click on the previous link to add this engine to the FireFox search engines list (on the menu drop-down) went around, so I guess I solved my problem. See menu attached to capture. I hope this helps someone else, as it took me a while to find. It was not found in the standard modules, you can find the usual Mozilla several pages of Add-ons

• 80070426 - Windows could not search for updates

  My computer is configured for automatic updates but has not updated since 3/22.  All this done today.  Help, please

  Please read: what information to post in forum Windows Update then come back and provide the information requested forthis post. DO NOT start another. Thank you!

  In the meantime, you suggest to Configure the system to boot. Once you have done this, see if the system can now search for and detect updates.
  If not, while still in the State to clean up the boot , download andSave the Fixit on this page: How to reset Windows Update components

  Once the download is complete, close the browser and all the open programs. Now start MicrosoftFixit 50202.msi and choose thedefault mode. Restart when it's done, and see if the system can check for detect and download updates now. If not, then rerun the Fixit with the system connected to the internet and chooseaggressive mode. Reboot when it's over and try checking updates once more.

  NOTE:  If a 3rd party firewall is used, then make sure that the Windows native firewall is on now. Open Windows Firewall in Control Panel to check.

  MowGreen Services update - consumer safety

• Search for the Explorer of Windows XP does not display option "what do you want to search for.

  When I open the Explorer search in windows XP, the dog still works without the option "what do you want to search for" and other options. How can I solve this problem?

  * original title - search for windows problem images *.

  Hi true-do,.
   
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
   
  This problem may occur if one or more of the Jscript registry key settings are incorrect. This problem can also occur if the Jscript.dll file is missing or damaged.
   
  Several dialog boxes are empty

• Can RoboHelp9 search for information from another database outside himself

  Hi experts,

  I just got the task of studying the search function of the RoboHelp if she could meet our needs:

  We want to have a RoboHelp 9 to host the Center contact information, and we already have two or three other database exist for different departments that contact center agents could connect to search for information.

  the question is:

  1. is it possible, after RoboHelp 9 created and configured, agents can search and retrieve information not only reside in RoboHelp but is also in other databases?

  2 is it possible that the public internet users could search for and retrieve information located in RoboHelp and other databases (allowing us to go)?

  Thank you very much in advance,

  Fran

  Not sure you mean by your last paragraph - you can check the blog post described in the help article - http://iconlogic.blogs.com/weblog/2011/02/adobe-robohelp-9-external-content-search.html#tp

  It is pretty cool (I don't use it myself in my projects because many of our customers are small internet); you could also add URLS to the search pages from external sites (such as a knowledge base) and let users make their own additional research.