Engine mark action do not update?

This driving force is part of a larger test. I call it every 15 minutes to test the stabilisation of the temperature (four consecutive readings at intervals of 15 minutes in the three degrees)

It seems to work in what concerns the detection of stabilization, but I do not understand why digital table indicators is not updating.

If you run this by got and fill the numbers in the table of working temperatures control all indicators.

But when it's a subvi all indicators remain grayed out or in their initialized when State I open it while it is running.

I even brought the table Stab with a pious terminal, it might be updated each time the subvi ran, but it is not.

What happens here?

I think that, sometimes, LV will not refresh the indicators on the panels that are closed both the VI is executed, even if the data are processed and transmitted properly. It is an optimization to avoid things that make no difference (in this case do not update indicators which cannot see).

If you run your main VI for awhile then open FP AE, you see the initial state of the public Service, until the main calls the AE again. Have you watched long enough to see if it is what is happening?

Lynn

Tags: NI Software

Similar Questions

Engine gateway AV ISA570 not updated

You wonder why I saw not a update of antivirus for my ISA device since October 21.

I tried the update of the manual AV but I get a message that I already have the latest version.

Is this correct?

Thanks in advance

Rick

Hi Ricardo,

I had changed my Cisco.com password a little there and does not update the credentials that CEP. Updates did not exist until I updated the credentials today. That's why my last updated shows today.

Take a look at the version, however. Our show: 201310112122. We have the same version. Your just updated on 12 October so that mine updated to this version. Note that the version resembles a timestamp, which is where I got the 11 Oct.

Let me know if you have any questions about that.

Thank you

Brandon

Advanced action not updated on the click box update

I inherited a model with a quiz with boxes made from boxes to click. In its current form, the user can cilck the button submit without clikcking on any of the 6 boxes (not an ideal situation for a trial).
I created variables for all click areas and associated with 0 (set checkbox 1 with 0... etc.).
In the in the slide, I have on enter slide Execute advanced Actions, I have AND of statements indicating that if the checkbox is = to 0, then hide and disable the button send... and I am doing this for all the checkboxes (if checkbox1 = 0 AND checkbox2 = 0... etc.). I then an Else, indicating to display and activate the submit button.
In the clickbox I have when it is activated (there's a box for clicked and clicked not), I put the variable checkbox to 1 between 0... that means that the advanced Actions 'should' be updated with the new variable to 1, but it does not work.
I think it has something to do with the click boxes because it seems to stall the reading head and not continue to run the advanced Actions. It's my guess only as that is the question.
Any thoughts?
Thank you.
Brent

Removal of variables is possible in Captivate 9, not in previous versions. Even in CP9 that it's always a bit tricky, some variables seem is always 'used' so that they do not.

I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

Take a look at this: generic icons | Files camera raw | Adobe Bridge

Dynamic action not updated report every time

Hi guys,.
I have a page which downloads statspack reports from different servers and stores them in the APEX. As well as this, it also displays a summary of the data (top 5 events of wait & load profile info) where flat an icon: http://oi40.tinypic.com/295uxxg.jpg
The table will refresh and display the data according to the value of P10_SNAPVAL (storage of the PK value).
It is not that I expect to do the report (it is not updating the table). I have the following:
Area PL/SQL dynamic content making the report
Dynamic action
-Event: change
-Item: P10_SNAPVAL
-Action: update
-Element affected: Region - load (dynamic PL/SQL content) profile
-Field of application event: I tried as well bind & live
The value of P10_SNAPVAL is changed whenever the user place an icon of Penguin (this works because the graphic works).
Anyone know why my current setup does not work with the table/how fix?
Edit: It's something to do with me changing using javascript?
```
$('img[name=summary]').mouseover(function() {
var get = new htmldb_Get(null,html_GetElement('pFlowId').value, null,10);
get.add('P10_SNAPVAL',$(this)[0].id.substring(3));
var gReturn = get.get();
document.getElementById('P10_SNAPVAL').value = gReturn;
$("#c9485413559485976").show();
$("#loadtab").show();
});
```
Edit 2: I tried:
```
jQuery('#apexir_WORKSHEET_REGION').trigger('apexrefresh');
```
and each apexir_WORKSHEET_REGION down id (apexir_REPORT, apexir_WORKSHEET, apexir_DATA_PANEL, 9587216508806437) but it is not updated the table of values for any of them. I thought that this call was made for normal day and reports of the IR, but I tried normal, he passed to IR and it is not refreshing. No errors in JS (according to firebug)

On page 2, I changed:

report area model was "no model", changed to "borderless region" - there must be a model.

and changed the static ID of the area to "report_updrep" - because in javascript, we use this ID.

Look, it works.

The marked stock gadget will not update.

stock market report does not update

stock market in gadgets Windows 7 will not be updated

Hello

Did you change your computer before this problem?

See the following Help article and check if it helps.

http://support.Microsoft.com/kb/2515657

See also:

Customize desktop gadgets

http://Windows.Microsoft.com/en-us/Windows7/customize-desktop-gadgets

It will be useful.

will not update updates from hp

It says that I have an HP update when I click updates, it passes through the audit & when it becomes too prepare the list of actions that it worked for 30 minutes and always running is this normal to take this long to prepare the list of actions.

Hi @fran77kel,

Thank you for having responded quickly. Do not update it with HP support assistant. I will send you a link to update the bios. Please visit the link: http://hp.com/drivers please follow the on-screen instructions and update the bios. I hope that it pans well. Trust me, I did a lot of research and a lot of effort went into this to help you.

Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

Please keep me posted as to how things went.

Now carefully and have a great week ahead.

Intel RST will not update

I use a notebook DV7 6175us and running 64-bit Windows 7 Home Premium. I need to install the Intel RST (10.6.0.1002) updated version. I have installed 10.1.2.1004. Problem is that whenever I run the Setup program, the Setup program stops and exits, because it is having a problem to install a driver. I copied the article today in the paper he did in c:\Intel\Logs\IintelIRST here:

> 12/01/2013 16:13:08:703
[Install Configuration]
Version of the installer: 1.3.15.0
Compile date = 1 Mon Nov 14:02:06 2010
OS command line = C:\Windows\Temp\IIF2\Setup.exe - IIFWrapped
Effective command line = - IIFWrapped
Windows version = Windows 7 SP1
Platform = 64 bit
Basic version 3.0.1 = (IIF2 ++)
Time system s = 3831
Source: C:\Windows\Temp\IIF2
[Languages]
0401 - C:\Windows\Temp\IIF2\Lang\ar-SA\setup.exe.mui
0405 - C:\Windows\Temp\IIF2\Lang\cs-CZ\setup.exe.mui
0406 - C:\Windows\Temp\IIF2\Lang\da-DK\setup.exe.mui
0407 - C:\Windows\Temp\IIF2\Lang\de-DE\setup.exe.mui
0408 - C:\Windows\Temp\IIF2\Lang\el-GR\setup.exe.mui
0409 - C:\Windows\Temp\IIF2\Lang\en-US\Setup.exe.mui
0c0a - C:\Windows\Temp\IIF2\Lang\es-ES\setup.exe.mui
040B - C:\Windows\Temp\IIF2\Lang\fi-FI\setup.exe.mui
040 c - C:\Windows\Temp\IIF2\Lang\fr-FR\setup.exe.mui
040d - C:\Windows\Temp\IIF2\Lang\he-IL\setup.exe.mui
040F - C:\Windows\Temp\IIF2\Lang\hu-HU\setup.exe.mui
0410 - C:\Windows\Temp\IIF2\Lang\it-IT\setup.exe.mui
0411 - C:\Windows\Temp\IIF2\Lang\ja-JP\setup.exe.mui
0412 - C:\Windows\Temp\IIF2\Lang\ko-KR\setup.exe.mui
0414 - C:\Windows\Temp\IIF2\Lang\nb-NO\setup.exe.mui
0413 - C:\Windows\Temp\IIF2\Lang\nl-NL\setup.exe.mui
0415 - C:\Windows\Temp\IIF2\Lang\pl-PL\setup.exe.mui
0416 - C:\Windows\Temp\IIF2\Lang\pt-BR\setup.exe.mui
0816 - C:\Windows\Temp\IIF2\Lang\pt-PT\setup.exe.mui
0419 - C:\Windows\Temp\IIF2\Lang\ru-RU\setup.exe.mui
041D - C:\Windows\Temp\IIF2\Lang\sv-SE\setup.exe.mui
041st - C:\Windows\Temp\IIF2\Lang\th-TH\setup.exe.mui
041F - C:\Windows\Temp\IIF2\Lang\tr-TR\setup.exe.mui
0804 - C:\Windows\Temp\IIF2\Lang\zh-CN\setup.exe.mui
0404 - C:\Windows\Temp\IIF2\Lang\zh-TW\setup.exe.mui
By default the user ID of language: 0x409
The default user INTERFACE language: 0x409
Loaded language 0409
[Conditions of verification]
Verification of administrator rights
OK admin rights
Verification of the BONES
OS check OK
Checking configuration .NET
.NET check OK
[Scanning drivers]
Digitization of the drivers
Found INF = C:\Windows\Temp\IIF2\Drivers\x32\iaAHCI.inf
Found INF = C:\Windows\Temp\IIF2\Drivers\x32\iaStor.inf
Found INF = C:\Windows\Temp\IIF2\Drivers\x64\iaAHCI.inf
Found INF = C:\Windows\Temp\IIF2\Drivers\x64\iaStor.inf
[Info INF]
INF = C:\Windows\Temp\IIF2\Drivers\x32\iaAHCI.inf
* Section key not found in the INF file
* Section key not found in the INF file
Date = 20/05/2011
Version = 10.6.0.1002
ClassGUID = {4D36E96A-E325-11CE-BFC1-08002BE10318}
PackageInfo.Name =
PackageInfo.Sequence = 0
Reference = INTEL_HDC manufacturer, ntx86
Solved the manufacturer = INTEL_HDC
!   Error in the location of a section of the aircraft. Inf to jump
[Info INF]
INF = C:\Windows\Temp\IIF2\Drivers\x32\iaStor.inf
* Section key not found in the INF file
* Section key not found in the INF file
Date = 20/05/2011
Version = 10.6.0.1002
ClassGUID = {4D36E97B-E325-11CE-BFC1-08002BE10318}
PackageInfo.Name =
PackageInfo.Sequence = 0
Reference = INTEL_HDC manufacturer, ntx86
Solved the manufacturer = INTEL_HDC
!   Error in the location of a section of the aircraft. Inf to jump
[Info INF]
INF = C:\Windows\Temp\IIF2\Drivers\x64\iaAHCI.inf
* Section key not found in the INF file
* Section key not found in the INF file
Date = 20/05/2011
Version = 10.6.0.1002
ClassGUID = {4D36E96A-E325-11CE-BFC1-08002BE10318}
PackageInfo.Name =
PackageInfo.Sequence = 0
Reference the manufacturer = INTEL_HDC, ntamd64
Solved the manufacturer = INTEL_HDC.ntamd64
INF supports 64-bit.
Description: Intel ICH7R/DH SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_27C1 & CC_0106
Description: Intel(r) ICH7M/MDH SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_27C5 & CC_0106
Description: Intel ICH9R / / DH SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_2922 & CC_0106
Description: Intel(r) ICH9M-E/M SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_2929 & CC_0106
Description: Intel(r) ICH10D / DO SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_3A02 & CC_0106
Description: Intel ICH10R SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_3A22 & CC_0106
Description: Intel (r) 5 Series 4 Port SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_3B29 & CC_0106
Description: Intel (r) 5 Series 6 Port SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_3B2F & CC_0106
Description: Intel (r) 5 Series/3400 Series SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_3B22 & CC_0106
Description: Intel (r) Desktop/Workstation/Server Express Chipset SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_1C02 & CC_0106
Description: Mobile Intel (r) Express Chipset SATA AHCI Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_1C03 & CC_0106
Matched HardwareID = PCI VEN_8086 & DEV_1C03 & CC_0106
Installation driver = {4d36e96a-e325-11ce-bfc1-08002be10318} \0000
* Section key not found in the INF file
[Info INF]
INF = C:\Windows\Temp\IIF2\Drivers\x64\iaStor.inf
* Section key not found in the INF file
* Section key not found in the INF file
Date = 20/05/2011
Version = 10.6.0.1002
ClassGUID = {4D36E97B-E325-11CE-BFC1-08002BE10318}
PackageInfo.Name =
PackageInfo.Sequence = 0
Reference the manufacturer = INTEL_HDC, ntamd64
Solved the manufacturer = INTEL_HDC.ntamd64
INF supports 64-bit.
Description: Intel ICH7R/DH SATA RAID Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_27C3 & CC_0104
Description: Intel(r) ICH7MDH SATA RAID Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_27C6 & CC_0104
Description: Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_2822 & CC_0104
Description: Mobile Intel (r) Express Chipset SATA RAID Controller
HardwareID = iaStor_Install, PCI VEN_8086 & DEV_282A & CC_0104
Removed INF = C:\Windows\Temp\IIF2\Drivers\x32\iaAHCI.inf
Removed INF = C:\Windows\Temp\IIF2\Drivers\x32\iaStor.inf
C:\Windows\Temp\IIF2\Drivers\x64\iaStor.inf deleted
Checking size of platform
Verification of decommissioning
[Check the INF versions]
C:\Windows\Temp\IIF2\Drivers\x64\iaAHCI.inf
Mobile Intel Express Chipset SATA AHCI Controller
Installed version = 10.1.2.1004
Version in package = 10.6.0.1002
[Install]
Record of action C:\Windows\Temp\IIF2\setup.if2 of reading.
Groups: APP = 1, ARP = 1, DRIVER = 1, ICC = 1, PIN = 0, SHORTCUTS = 1 BAC = 1 IU = 1
Display of the installation wizard
ICC will NOT install
[Components of filtering by Group]
'Process' on line 213. Group = PIN
'Register' at line 273. Group = ICC
'Register' on line 284. Group = PIN
'Register' at line 296. Group = PIN
'Register' on line 308. Group = PIN
'Process' on line 357. Group = PIN
'Register' at line 367. Group = ICC
'Register' at line 376. Group = PIN
'File' at line 389. Group = PIN
[Filter conditions]
'Shortened' at line 224. Condition = NOT IsOS (VISTA, MAXOS)
List of actions for a sorting plant
[Process - 0]
Marking IAStorIcon.exe to complete when uninstalled
[Process - 0]
Marking IAStorUI.exe to complete when uninstalled
[Process - 0]
Marking C:\Windows\Microsoft.NET\Framework\v2.0.50727\installutil.exe to run when uninstalled
[Process - 0]
Marking C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe to run when uninstalled
[File - 0]
C:\Program Files (x 86) \Intel\Intel(R) Technology\IAStorDataMgrSvc.InstallLog of fast storage to remove during the uninstallation of marking
[Folder - 0]
Marking the folder C:\Program Files (x 86) \Intel\Intel(R) Technology\uninstall\x64 of fast to remove storage on uninstall
[Custom action - 99]
Looking for an existing installation of IMSM
No existing installation of IMSM found
[File - 500]
Operation = copyonly
Destination = C:\Program Files (x 86) \Intel\Intel (R) rapid storage Technology\uninstall\Setup.exe
Copy of the C:\Windows\Temp\IIF2\Setup.exe file
[File - 505]
Source = C:\Windows\Temp\IIF2\lang
Destination = C:\Program Files (x 86) \Intel\Intel (R) rapid storage Technology\uninstall
Copy of the C:\Windows\Temp\IIF2\lang\ar-SA\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\ar-SA\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\cs-CZ\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\cs-CZ\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\da-DK\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\da-DK\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\de-DE\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\de-DE\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\el-GR\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\el-GR\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\en-US\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\en-US\Setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\es-ES\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\es-ES\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\fi-FI\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\fi-FI\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\fr-FR\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\fr-FR\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\he-IL\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\he-IL\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\hu-HU\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\hu-HU\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\it-IT\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\it-IT\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\ja-JP\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\ja-JP\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\ko-KR\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\ko-KR\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\nb-NO\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\nb-NO\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\nl-NL\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\nl-NL\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\pl-PL\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\pl-PL\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\pt-BR\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\pt-BR\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\pt-PT\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\pt-PT\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\ru-RU\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\ru-RU\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\sv-SE\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\sv-SE\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\th-TH\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\th-TH\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\tr-TR\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\tr-TR\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\zh-CN\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\zh-CN\setup.exe.mui file
Copy of the C:\Windows\Temp\IIF2\lang\zh-TW\license.txt file
Copy of the C:\Windows\Temp\IIF2\lang\zh-TW\setup.exe.mui file
[File - 510]
Operation = copy
Destination = C:\Program Files (x 86) \Intel\Intel (R) rapid storage Technology\uninstall\x64\Drv64.exe
Copy of the C:\Windows\Temp\IIF2\x64\Drv64.exe file
[File - 515]
Operation = copyonly
Destination = C:\Windows\SysWOW64\difxapi.dll
Copy of the C:\Windows\Temp\IIF2\difxapi.dll file
Source version: 2.1.0.0
Dest version: 2.1.0.0
Ignored files, destination file is the same or newer
[File - 515]
Operation = copyonly
Destination = C:\Windows\system32\difxapi.dll
Copy of the C:\Windows\Temp\IIF2\x64\difxapi.dll file
Source version: 2.1.0.0
Dest version: 2.1.0.0
Ignored files, destination file is the same or newer
[Setup uninstall - 520]
Uninstall key: Software\Microsoft\Windows\CurrentVersion\Uninstall\ {3E29EE6C-963A-4aae-86C1-DC237C4A49FC}
[INF - 600]
Installation of C:\Windows\Temp\IIF2\Drivers\x64\iaAHCI.inf
INF = C:\Windows\Temp\IIF2\Drivers\x64\iaAHCI.inf
Run the command: «C:\Windows\Temp\IIF2\Drivers\x64\iaAHCI.inf' C:\Windows\Temp\IIF2\x64\Drv64.exe - driverinf-flags 20 - key «Software\Intel\Difx64» path
!   DriverPackageInstall error 0 x 2
IIF introduce NOT reset
Exit code = 0 x 2
ResultCode = 2
< 1/12/2013="">
Now, from what I read, it detects files that are the same version. But I know that I have an older version installed. So my question is how I setup ignore these errors and continue the installation?

Kyle_W, Yes, I have, and even he could not update the RST. I must admit, he left me speechless for a second. But I decided to go to the Intel website to know if they had an update. Of course, they did. Version 11.2.0.1006 found here: http://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng&DwnldID=21730p which surprises me, is that HP has not that on the page of the drivers for my laptop. Anyway, I installed it and it played beautifully since. Problem solved.

Send an email on Windows 8 not updated

I have a new computer with Windows 8. My yahoo email that is on my e-mail application is not updated regularly. Any suggestions? Y at - it an option on the frequency that it is updated. I thought it was supposed to be 'live' with the update in real time, but which does not occur.

Hello wiwetz,

I would like to confirm that I understand your concern. You are not to receive e-mail messages that they arrive?

For the e-mail application to receive the electronic as they arive, the Mail app must be enabled on the lock screen. You can add Mail to the lock of the start screen->-> change PC settings-> settings-> lock screen aps.

You may also change your synchronization settings.

To change your sync settings
1. On start, tap or click Mail.
2. Enter in the right edge of the screen, and then tap Settings.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, then clickSettings).
3. Press or click accounts.
4. Press or click the account you want.
Adjust these settings:
- How many times your email Mail Downloads (for action as they arrive at all hours, or manually).
- Back to how to pass messages (as short as three days at any time).
- What content you want to downloaded (e-mail, calendar, contacts).
Mark

Creative cloud is not updated

Hello
I am a subscriber of creative cloud with all adobe applications and for 2 months, I can't update all apps.
I tried the solution of uninsatlling / install creative cloud and also one of the applications (I've not won / install Adobe Indesign) and I still have the same error message:
error U44M1P7
Thanks for your help
And here is the log:
21/02/14 13:32:45:879 | [INFO] | | OOBE. OF | | | | 8492 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
21/02/14 13:32:45:879 | [INFO] | | OOBE. OF | | | | 8492 | Visit http://www.adobe.com/go/loganalyzer/ for more information
21/02/14 13:32:45:879 | [INFO] | | OOBE. OF | | | | 8492 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
21/02/14 13:32:45:879 | [INFO] | | OOBE. OF | | | | 8492 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
21/02/14 13:32:45:879 | [INFO] | | OOBE. OF | | | | 8492 | START - Installer Session
21/02/14 13:32:45:879 | [INFO] | | OOBE. OF | | | | 8492 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Version of RIBS: 7.0.0.108
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Version of the OS Win: 6.1.1.0 64-bit Type: 1
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [Total timer]
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | CHECK: Single Instance
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | CHECK: credentials
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Load deployment file
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | DeploymentFiles option not given
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | CHECK: Another installer native OS already running
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Create required folders
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Assuming the installation mode
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Search for path source install
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Media Sync DB...
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [synchronize media DB]
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Pre check media db sync
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | End of pre check media db sync. Exit code: 0
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER END: [media DB Sync] took 2859,98 milliseconds (2,85998 seconds) DTR = 67,1333 Kbps (0,0655598 Mbps)
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Ready to initialize the session started by...
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [CreatePayloadSession]
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | -START - updated media Sources - BEGIN-
21/02/14 13:32:45:880 | [INFO] | | OOBE. OF | | | | 8492 | Update source path: C:\Users\bruno\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\setup
21/02/14 13:32:45:936 | [INFO] | | OOBE. OF | | | | 8492 | Update media info for: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
21/02/14 13:32:45:936 | [INFO] | | OOBE. OF | | | | 8492 | Ignoring the original being local installation source data
21/02/14 13:32:45:936 | [INFO] | | OOBE. OF | | | | 8492 |   Type: order 0, volume: 1, name of the media: AdobeCSXSInfrastructure4-mul
Path: C:\Users\bruno\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\setup \payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
21/02/14 13:32:45:936 | [INFO] | | OOBE. OF | | | | 8492 | -Updated media Sources - the END-
21/02/14 13:32:46:104 | [INFO] | | OOBE. OF | | | | 8492 | Support for the version of COAST range: [0.0.0.0,7.0.0.108]
21/02/14 13:32:46:104 | [INFO] | | OOBE. OF | | | | 8492 | -CreatePayloadSession: the machine is x 64-
21/02/14 13:33:00:209 | [INFO] | | OOBE. OF | | | | 8492 | _ Check _ subscribers dependence
21/02/14 13:33:00:238 | [INFO] | | OOBE. OF | | | | 8492 | Order of operation BEGIN all the payloads of session: library (requires, satisfied)
21/02/14 13:33:00:238 | [INFO] | | OOBE. OF | | | | 8492 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4 - mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: 0 (0.0)
21/02/14 13:33:00:238 | [INFO] | | OOBE. OF | | | | 8492 | COMPLETE the operation order for all the payloads of session: library (requires, satisfied)
21/02/14 13:33:00:240 | [INFO] | | OOBE. OF | | | | 8492 | Patch Adobe CSXS Infrastructure-mul 4.0.2.0 4_4.0.2_AdobeCSXSInfrastructure4 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} can be applied to the product Adobe CSXS Infrastructure 4 4.0.0.0 {5F816B76-62F3-41C9-B651-27F49F25F50B}
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Ignoring the entry of deployment for the INSTALLDIR: marked as fixed
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Setting the property "installSourcePath": C:\Users\bruno\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\setup
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Definition of property 'mode': silencer
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Setting the property "updateManifestPath": C:\Users\bruno\AppData\Local\Adobe\AAMUpdater\1.0\Data\AdobeCSXSInfrastructure4-4\4.0.2\4. 0.2.XML
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Setting the property "workflow": update
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Replace the "extensionsOnly" property to: 1
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Replace the 'mode' property to: silent
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Replace the "patchesOnly" property to: 1
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Replace the "updateManifestPath" property to: C:\Users\bruno\AppData\Local\Adobe\AAMUpdater\1.0\Data\AdobeCSXSInfrastructure4-4\4.0.2\4. 0.2.XML
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Replace the "workflow" property to: update
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Find actions of payload:
21/02/14 13:33:00:391 | [INFO] | | OOBE. OF | | | | 8492 | Decide which mode of installation to use...
21/02/14 13:33:00:419 | [INFO] | | OOBE. OF | | | | 8492 | Setting START asked actions of payload
21/02/14 13:33:00:421 | [INFO] | | OOBE. OF | | | | 8492 | Value returned by searches for payload: Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4 - mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} is: false
21/02/14 13:33:00:421 | [INFO] | | OOBE. OF | | | | 8492 | Chain of action for CSXS Adobe 4_4.0.2_AdobeCSXSInfrastructure4 - mul 4.0.2.0 infrastructure {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} is installed
21/02/14 13:33:00:422 | [INFO] | | OOBE. OF | | | | 8492 | Setting END asked actions of payload
21/02/14 13:33:00:425 | [INFO] | | OOBE. OF | | | | 8492 | Were collected advanced path check to INSTALLDIR
21/02/14 13:33:00:425 | [INFO] | | OOBE. OF | | | | 8492 | INSTALLDIR is a correct path
21/02/14 13:33:00:425 | [INFO] | | OOBE. OF | | | | 8492 | INSTALLDIR is not the root path
21/02/14 13:33:00:425 | [INFO] | | OOBE. OF | | | | 8492 | INSTALLDIR is on a local volume
21/02/14 13:33:00:425 | [INFO] | | OOBE. OF | | | | 8492 | INSTALLDIR is on a volume that is accessible in writing
21/02/14 13:33:00:425 | [INFO] | | OOBE. OF | | | | 8492 | INSTALLDIR is not on a case-sensitive volume
21/02/14 13:33:00:425 | [INFO] | | OOBE. OF | | | | 8492 | INSTALLDIR managed validation of main path path: C:\Program Files (x 86) \Common Files\Adobe\CEPServiceManager4
21/02/14 13:34:28:019 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [checking the system: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 | In InstallPreSystemCheckProc
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 | Custom action return code: 0
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER END: [checking the system: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 2,13168 milliseconds (0.00213168 seconds)
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 | Operations START InstallOperationsQueue unordered
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4 - mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: operation to install
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 | Unordered InstallOperationsQueue to END operations
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 | START InstallOperationsQueue ordered operations
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4 - mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: operation to install
21/02/14 13:34:28:021 | [INFO] | | OOBE. OF | | | | 8492 | END InstallOperationsQueue ordered operations
21/02/14 13:34:28:073 | [INFO] | | OOBE. OF | | | | 8492 | Payloads were committed before the flight.
21/02/14 13:34:28:073 | [INFO] | | OOBE. OF | | | | 8492 | Call pre-sessional custom Hook
21/02/14 13:34:28:074 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [pre session: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
21/02/14 13:34:28:075 | [INFO] | | OOBE. OF | | | | 8492 | In InstallSessionOpenProc
21/02/14 13:34:28:075 | [INFO] | | OOBE. OF | | | | 8492 | Custom action return code: 0
21/02/14 13:34:28:075 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER END: [pre session: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 1,07312 milliseconds (0.00107312 seconds)
21/02/14 13:34:28:088 | [INFO] | | OOBE. OF | | | | 8492 | Operations START InstallOperationsQueue unordered
21/02/14 13:34:28:088 | [INFO] | | OOBE. OF | | | | 8492 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4 - mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: operation to install
21/02/14 13:34:28:088 | [INFO] | | OOBE. OF | | | | 8492 | Unordered InstallOperationsQueue to END operations
21/02/14 13:34:28:088 | [INFO] | | OOBE. OF | | | | 8492 | START InstallOperationsQueue ordered operations
21/02/14 13:34:28:088 | [INFO] | | OOBE. OF | | | | 8492 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4 - mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: operation to install
21/02/14 13:34:28:088 | [INFO] | | OOBE. OF | | | | 8492 | END InstallOperationsQueue ordered operations
21/02/14 13:34:28:095 | [INFO] | | OOBE. OF | | | | 8492 | Call the code to the custom action for the pre-installation for 4_4.0.2_AdobeCSXSInfrastructure4 Adobe CSXS useful-mul 4.0.2.0 charging Infrastructure {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
21/02/14 13:34:28:095 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [pre payload: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
21/02/14 13:34:28:096 | [INFO] | | OOBE. OF | | | | 8492 | In PrePayloadInstallProc
21/02/14 13:34:33:099 | [INFO] | | OOBE. OF | | | | 8492 | Custom action return code: 0
21/02/14 13:34:33:099 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER END: [pre payload: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 5003,91 milliseconds (5,00391 seconds)
21/02/14 13:34:33:099 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [operation payload: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
21/02/14 13:34:33:108 | [INFO] | | OOBE. OF | | | | 7176 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
21/02/14 13:34:33:108 | [INFO] | | OOBE. OF | | | | 7176 | Operation of the installer: PayloadInstaller
21/02/14 13:34:33:108 | [INFO] | | OOBE. OF | | | | 7176 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
21/02/14 13:34:33:108 | [INFO] | | OOBE. OF | | | | 7176 | Request to install the payload
21/02/14 13:34:33:129 | [INFO] | | OOBE. OF | | | | 7176 | 4_4.0.2_AdobeCSXSInfrastructure4 Adobe CSXS useful-mul 4.0.2.0 charging Infrastructure {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: component path C:\Program Files (x 86) ARKEngine \Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
21/02/14 13:34:33:274 | [INFO] | | OOBE. OF | | | | 7176 | All self-extracting assets. Number of active: 2
21/02/14 13:34:33:275 | [INFO] | | OOBE. OF | | | | 7176 | CustomizedPatch property not found in the database
21/02/14 13:34:33:275 | [INFO] | | OOBE. OF | | | | 7176 | Begin the installation of payload to C:\Users\bruno\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\setup \payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
21/02/14 13:34:33:352 | [ERROR] | | OOBE. OF | | | | 7176 | DF045: Detected file Corruption. Reinstall the product and then apply the patch again. (Cannot repair the file "C:\Program Files (x 86) \Common Files\Adobe\CEPServiceManager4\lib\ServiceManager-Launcher.dll") (6 Seq)
21/02/14 13:34:33:352 | [WARNING] | | OOBE. OF | | | | 7176 | DW063: The ARKPatchCommand command failed. (6 Seq)
21/02/14 13:34:33:352 | [INFO] | | OOBE. OF | | | | 7176 | End of the installation of payload to C:\Users\bruno\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\setup \payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
21/02/14 13:34:33:434 | [ERROR] | | OOBE. OF | | | | 7176 | Has not applied the fix to the file to "C:\Program Files (x 86) \Common", tool to patch returned the error: 32769 Seq (4)
21/02/14 13:34:33:435 | [ERROR] | | OOBE. OF | | | | 7176 | DW063: Error roll back the command ARKPatchCommand(Seq 4)
21/02/14 13:34:33:508 | [INFO] | | OOBE. OF | | | | 8492 | * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * Operation completes. Statut : 2 = * = * = * = * = * = * = * = * = * = * = * = * = *
21/02/14 13:34:33:508 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER END: [operation payload: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 408,323 milliseconds (0,408323 seconds)
21/02/14 13:34:33:528 | [INFO] | | OOBE. OF | | | | 8492 | OverrideFile specified user:
21/02/14 13:34:33:534 | [INFO] | | OOBE. OF | | | | 8492 | The inventory of the csu was not updated to support useful Adobe CSXS Infrastructure-mul 4.0.2.0 4_4.0.2_AdobeCSXSInfrastructure4 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}, the value of the local var is - 1
21/02/14 13:34:33:535 | [INFO] | | OOBE. OF | | | | 8492 | RESTORE custom action code providing for pre-installation for load useful Adobe CSXS Infrastructure-mul 4.0.2.0 4_4.0.2_AdobeCSXSInfrastructure4 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
21/02/14 13:34:33:535 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [pre payload: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
21/02/14 13:34:33:537 | [INFO] | | OOBE. OF | | | | 8492 | In PrePayloadInstallProc
21/02/14 13:34:38:540 | [INFO] | | OOBE. OF | | | | 8492 | Custom action return code: 0
21/02/14 13:34:38:540 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER END: [pre payload: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 5005,09 milliseconds (5,00509 seconds)
21/02/14 13:34:38:545 | [INFO] | | OOBE. OF | | | | 8492 | No operation. We finished:
21/02/14 13:34:40:550 | [INFO] | | OOBE. OF | | | | 8492 | Total number of installed components: 0
21/02/14 13:34:40:550 | [INFO] | | OOBE. OF | | | | 8492 | Total components repaired: 0
21/02/14 13:34:40:550 | [INFO] | | OOBE. OF | | | | 8492 | Total number of removed components: 0
21/02/14 13:34:40:550 | [WARNING] | | OOBE. OF | | | | 8492 | DW050: The following payload errors were found during the installation:
21/02/14 13:34:40:550 | [WARNING] | | OOBE. OF | | | | 8492 | DW050: - Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4 - mul: installation failed
21/02/14 13:34:40:550 | [INFO] | | OOBE. OF | | | | 8492 | Call post-Forum custom Hook
21/02/14 13:34:40:551 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER: [poster session: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
21/02/14 13:34:40:552 | [INFO] | | OOBE. OF | | | | 8492 | In InstallSessionCloseProc
21/02/14 13:34:40:552 | [INFO] | | OOBE. OF | | | | 8492 | Custom action return code: 0
21/02/14 13:34:40:552 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER END: [poster session: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 1,61255 milliseconds (0.00161255 seconds)
21/02/14 13:34:40:552 | [INFO] | | OOBE. OF | | | | 8492 | : TIMER END: [Total Timer] took 118389 milliseconds (118,389 seconds) DTR = 26845,7 Kbps (26,2166 Mbps)
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | -------------------------------------- Summary --------------------------------------
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | -0 fatal Error (s), 3 (s)
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | Version of the OS Win: 6.1.1.0 64-bit Type: 1
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 |
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | -Payload: Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4 - mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}.
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | ERROR: DF045: file corruption detected. Reinstall the product and then apply the patch again. (Cannot repair the file "C:\Program Files (x 86) \Common Files\Adobe\CEPServiceManager4\lib\ServiceManager-Launcher.dll") (6 Seq)
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | ERROR: Could not apply the patch to the file to "C:\Program Files (x 86) \Common", tool to patch returned the error: 32769 Seq (4)
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | ERROR: DW063: error to reverse the order ARKPatchCommand (Seq 4)
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 |
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | Please find the error string above to find when the error occurred.
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | These errors resulted in installer exit code mentioned below.
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | -------------------------------------------------------------------------------------
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 |
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | Exit code: 7 - could not complete the silent workflow.
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | Please see specific errors for troubleshooting. For example, ERROR: DF045, DW063...
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | END - Installer Session
21/02/14 13:34:41:552 | [INFO] | | OOBE. OF | | | | 8492 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

Please uninstall Photoshop, rename CEPServiceManager4 to CEPServiceManager4.old. Install app and try to update.

Kind regards

Romit Sinha

Keychain does not display the password or secure since 10.11.2 notes updated

Keychain does not display passwords or secured since 10.11.2 notes updated. I enter the password and move out them.

Attempted to create a new keychain, then re-import the old etc. Turned on and off in icloud. Keychain firstaid is absent from the update so no luck there. Any thoughts?

Please launch the Console application in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

The title of the Console window should be all Messages. If it isn't, select

SYSTEM LOG QUERIES ▹ all Messages

in the list of logs on the left. If you don't see this list, select

List of newspapers seen ▹ display

in the menu at the top of the screen bar.

Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

Please don't dump blindly thousands of lines in the journal in this discussion.

Please do not post screenshots of log messages - text poster.

Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

IX2 - dl actions do not appear on start up

I have an Iomega IX2 - DL, which is only a few months old. Lately, when I turn it on, all my actions do not see the and I'm unable to access my data. If I leave it for about 5-10 minutes, they finally appear to give me access to my data.

Hoping someone has an idea on what could be the issue.

See you soon.

I tried a system check of files in mode offline, but for some reason, that would not work (I guess the damage spread beyond the data is not mounted in the lenovo partition).

Fortunately, I still had most of my data on my NAS old then I attached the reader lenovo to a container of disk external usb and saved just the additional data.

I have now done a factory reset and I am trying to move my data again through to the lenovo.

Seems to be a behavior at the moment. I will continue to monitor the lenovo and if it happens again, I'll open a service ticket.

I can only imagine that a firmware for the corrupt lenovo system update, causing problems. I think I'll put the lenovo drive in the usb container and backup the system incase any other partition cause other problems the firmware updates.

Thanks for your help.

See you soon.

guarantee not updated in my profile

I have already submitted (3 times) the copy of invoice of my mobile for the proof of purchase, but still not updated in my profile, not even answer from the support team. For participants of MFN feedback I needed this to update my profile.

Thank you

RAM

Proof of purchase suggestions are being developed. We don't currently has a process for the India but see that we receive a large number for the India to our support team we. She'll get. Having completed this does not affect your eligibility for the MFN as I see that you have produced recorded successfully. Your participation on the Forums has rather a greater effect on your eligibility. You will receive an email when you POP is completed.

Mark

Forums Manager

Money Microsoft 2002 my wallet will not update online

This morning, for the first time in 10 years, only my wallet will not update online

I get the message "there is a problem and money will have to close."

Hello

Check in the Microsoft Money Forum.

Microsoft Money - Forum
http://social.Microsoft.com/forums/en/money/threads

====================

Other information:

Microsoft Money Solution Center - suggests alternatives
http://support.Microsoft.com/mny

What is Microsoft Money Plus sunset
http://support.Microsoft.com/kb/2118008

BING - microsoft money replacement
http://www.bing.com/search?q=Microsoft+Money+replacement&go=&QS=n&SK=&SC=7-27&form=QBLH

Google - microsoft money replacement
http://www.google.com/#sclient=psy-ab&hl=en&source=hp&q=microsoft+money+replacement&pbx=1&oq=microsoft+money+replacement&aq=f&aqi=g4&aql=&gs_sm=e&gs_upl=9978l11972l2l12926l12l1l0l0l0l0l467l467l4-1l1l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=dcc84c4c7dd2e143&biw=1024&bih=681

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

"I can not update my computer it says WindowsUpdate_80070057" "WindowsUpdate_dt000"

My computer will not update for several weeks, he just stopped on the day and I have 38 updates to install someone can help me please thanks

Try this

http://support.Microsoft.com/kb/971058

If this post answers your question, click mark as answer .

Engine mark action do not update?

Similar Questions

Maybe you are looking for