searches for a user name when you know than their SMTP

Similar Questions

• What should I enter for "User Name" when you install the first 12 items on a Windows 7 computer?

  What should I enter for "User Name" when you install the first 12 items on a Windows 7 computer?

  Thank you

  TS

  Kglad

  I used the default value presented to me (computer username) and installed fine.

  Thanks for your comments.

  Concerning

  TS

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows Messaging keeps asking for a user name and password. What should I do?

  Windows Mail keeps asking for a user name and password.  I know that the username and password are good because I can access mail via the web.  I have two e-mail accounts.  Saturday, I installed 23 updates of windows.  Now today, I can't get into windows mail.  Why?

  Error message:

  Account: 'first name', server: 'ipostoffice.worldnet.att.net', Protocol: POP3, server response: '-ERR [AUTH] invalid user/password (error 999)', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Account: 'username', server: 'ipostoffice.worldnet.att.net', Protocol: POP3, server response: '-ERR [AUTH] invalid user/password (error 999)', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Hello

  I am happy that it works.

  It is perhaps that this has nothing to do with your system, but a 'problem' in the e-mail server of the provider.

• an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  Original title:

  Win7 victory explrer click dsktop & mployment plces & get eror msg file is not a CDSA wth to prfrmin ths field prgrm. pls instl one prgrm so is alrdy instld Credit Union assc ltvds cntrl pnl prgrms

  I don't know how to fix. Help, please.    Win7 windows Explorer click

  Office & recent locations & grterror msg:
  This file does not have a program associated with it for performing this action. Please install a program or, if it is already installed. create an asssociationin the default programs control panel.
   
  Information given in the new thread:
  Error Msg When you try open office spaces & recent since the win Explorer

  when im in windows Explorer and click on the desktop or the recent places the link I get a msg of error and they will not open, but all others open. I posted pictures of error msg to skydrive yesterday.

  Hello

  Welcome to the Microsoft Community Forums.

  I see you've found an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  1. Have you made changes on the computer before this problem?
  2. What is the full error message?

  I suggest you to report to us the screenshot of the Advanced window so that we can understand what exactly the situation.
  
  See:
  Use SkyDrive download collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  The average while you can try the following steps and check if the error reappears.

  Method 1:

  Step 1:

  Start the computer in safe mode and check the number.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful.

  Back with the details so that we can help you further. We also indicate the result of the suggested steps.

• query to search for the user of the application

  Hello
  
  What is the query to search for the user of the application in the sql command?
  
  I tried the query below

  select app_user from dual;

  app_user invalid identifier

  Thank you.

  Hello skud,
  The following SQL statement will give you the APP_USER which is an environmental variable in the APEX:

  SELECT v('APP_USER') FROM DUAL;
  

  See if it works. As I used the syntax given in the triggers to record audit trail above and it works fine.
  Kiran

  Published by: chubby Kiran June 11, 2011 04:08

  Published by: chubby Kiran June 11, 2011 04:09

• Include column names when you paste data from SQL Developer

  Does anyone know if the developer SQL has an option to include the column names when you copy and paste the SQL Developer data to Excel?

  If you use Shift + Ctrl + C instead of just Ctrl + C, it copies the selected data and the column headings to select data.

  theFurryOne

• I'm doing a site of the gallery that I have 16 artist at the top of a long page, I would to see a work of art to the right of the list when you hover over their name?

  I'm doing a site of the gallery that I have 16 artist at the top of a long page, I would to see a work of art to the right of the list when you hover over their name?

  

  You can use compositions or panels:

  https://helpx.Adobe.com/Muse/using/composition-widgets.html

  https://helpx.Adobe.com/Muse/using/widgets.html

  https://helpx.Adobe.com/Muse/how-to/organize-content-with-tabbed-panel.html

  https://helpx.Adobe.com/Muse/using/Panel-widgets-tabbed-accordion.html

  Thank you

  Sanjit

• Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

  Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

  Move on to the Discussion of Photoshop

• I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I immediately need to HAVE

  I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I need immediately GOT to work

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• Now that we have liquid, is there a better way to make an Alphabet for Webapp elements filter when you have more than 500 Articles?

  Now that we have liquid, is there a better way to make an Alphabet for Webapp elements filter when you have more than 500 Articles?

  I am using the JQuery ListNav, but my webapp now has too many items.  Liquid filter by chain to make a filter of the alphabet?

  {module_webapps id = "16734" filter = 'all' template="/Layouts/WebApps/Applications/dashboard-list-a.tpl' = 'collection' render}

  What else can I use in the parameter 'filter '?

  Thank you!

  Shannon

  Udemy as a tutorial on it. Practical examples of liquid for Adobe Business Catalyst markup . It was called list Rolodex. This is the solution you want.

• Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  It is an Apple problem. They obviously fixed with a change to iTunes. Download the update on their part.

  HAL

• I do remember not my username and password but no reminder sent when I ask for the user name reminder email

  I try and connect but can't remember my user name or password.
  I request an email user name, but nothing is coming through. I left for an hour, but no email received. I also check the spam box.

  Sorry, it took a while, but I got a response to my yahoo email account and have now successfully connected.
  Thank you for your answer, but it is resolved.

• When I try to share files between two computers Windows XP with SP3, I'm invited for a user name and password on both.

  I set up a home network with 2 computers with XP Media Center 2002 SP3 1 and 1 with XP Home SP3 2002 can see computers on the network and the Ping works. But I wonder a user name and password. seems to come from the computer. Do not see documents shared to the Media Center computer.

  original title: file sharing problems.

  As far as I can remember, Media Center is XP Pro with additional multimedia functions.  What follows is a very old post by MS MVP Malke, but the Council is still sound:

  File sharing / print

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Configure Windows to login automatically (MVP Ramesh) -.

  http://WindowsXP.MVPs.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Cannot use 'alt - n' for 'next' shortcut key when you use 'ctrl-f' to the search page.

  From the update to Firefox 25.0 'alt - n' and 'alt - p' shortcut keys no longer work when you navigate to a page with "ctrl-f". Is it possible to get these to work, or are there new keyboard shortcuts?

  Hello kilereren, here you will find all the shortcuts to search: https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly#w_search