Similar Questions

• Mini-Tower OptiPlex 990 - dedicated video RAM?

  Hi all. I recently bought a refurbished Dell Optiplex 990 MT, and I tried to increase the dedicated video RAM. It is currently set at 64 MB, and it's way, WAY too low. It has 8 GB of RAM in it, and I thought I could juice upward without falling another 200-300 dollars for a discrete GPU.

  I visited most sites say that there is an option in the BIOS, but I have no luck. I upgraded to the latest firmware (A19), but nothing. Did I just waste my money buying this thing?

  You have the latest Intel Chipset and Intel Graphics drivers? Go to the Intel download site and that his assistant scan your system for the appropriate drivers.

  Most likely, you cannot increase the amount of RAM dedicated to video, and I only see the option listed in the BIOS according to the service Manual.

  Video expansion card must not be very expensive so that even than a "plain vanilla" card could increase performance.

• CPU dual core quad core replace on the radiator? Mini Tower Optiplex 755

  Hi, I am currently using a dual core 6850 and I think to buy a quad core. I have a 500W PSU as a spare.

  Can I replace the CPU on a Quad Core without changing the cooling system?

  heinflhs

  Here are the specifications of the replacement PSU part. Are they not better than the original power SUPPLY Dell block?

  This power supply is ATX and not EPS12V

  Better is not the issue.  Dell power supplys 80% efficient are not 70% ATX.  The - 5v rail is a question too although it may cause a fire from the motherboard or damage your system.  Its a dead giveaway that this is a power ensure between 1990 and 2000.

  This current is on track is not negligible. There is a single 12V RAIL on that unit and its maximum is 17A

  EPS 12V units have multiple @ 18 amps 12V rails each.  MAX Power on 12V rails is 264w not 204w

  This unit has much more on the 5V and 3.3V rails at the expense of the independent 12V rails and CPU 4 pin. So not this emergency equipment is not likely to work well or not at all.

  

  Recommended update or replacement is EVGA 750B 1

  

• Card mother Optiplex 755 SFF fit in a Dell optiplex 745 Mini-Tower dualcore?

  Hello, I might be able to buy a mini-tower Optiplex of second hand, and I would like to install the motherboard etc. my Optiplex 755 SFF.

  Wilting thi made?

  The idea is that, with the Mini tour, I can buy a better GPU.

  thanx.

  No, it does not.   Of the Board of Directors, the number of slots available, etc. is different.

• Update on power supply for Dell Optiplex Mini Tower 3020

  Can you suggest me a power supply that compatible with my Dell pc? The default POWER supply has only 290W. I want a power supply about 500-550W and compatible motherboard Optiplex 3020 and fit the case.

  The power supply in the TOWER can be updated with an adapter.

  Dell OptiPlex 3020 main PSU to power 24 pin cable adapter 8 pin (30cm)

  Suitable for Dell OptiPlex 3020 / 7020 / 9020 / T1700

  http://www.moddiy.com/products/Dell-OptiPlex-3020-PSU-main-power-24%252dPin-to-8%252dPin-adapter-cable-%2830cm%29.html

• I need two part number in 3020 OptiPlex Mini Tower

  

  The switch and the speaker can help me?  @SpeedStep

  The part number for the intrusion switch is on the white label, you can see on the photo.

  The part number for the company premises will be a white label on the side of the enclosure also.  Internal speaker Assembly 29MKK

  029MKK Optiplex 390 790 990 3010 internal 23mm speaker

  OptiPlex 390 3010 MT Mini-Tower switch button 74XPK

  Dell UC635 chassis switch

  Compatible models: 3010 OptiPlex, OptiPlex 740, desktop OptiPlex 740, OptiPlex 360 Minitour OptiPlex 740, OptiPlex 740 MLK, 740e OptiPlex, OptiPlex 745, OptiPlex 745 Desktop, OptiPlex 745c, 745th OptiPlex, OptiPlex 755, OptiPlex 990, OptiPlex GX520, OptiPlex GX620, OptiPlex XE, Precision T1600, Precision T1650, Precision T3600, Precision T5600, Precision T7500, Precision T7600, Precision T7600, T7600 WORKSTATION workstation

  

  

• Discover Optiplex 755 service tag Mini-Tower model or what?

  Hi, I'm doubting weather my Optiplex 755 is a mini-tower or LTS model.

  I found the following tagd:

  Service Tag:

  ADMIN NOTE: maintain the label removed by privacy policy >

  Express service code:

  ADMIN NOTE: kidnapped by the Express service code privacy policy >

  I can't find an explanation on the Web site.

  Anyone know where I can find the info?

  thanx

  Corresponds to the aspect of the case with the photo in the pdf file below (from L to R, Mini-Tower, desktop, SFF and ultra SFF.

  www.Dell.com/.../opti_755_techspecs.pdf

• OptiPlex 745 Mini-Tower - GFX card options?

  Hi all

  I own an optiplex 745 Mini-Tower and I want to install a graphics card. I read the manual and it says that its PCI Express slot is 16 x but I could not find anywhere a response on whether it is compatible PCI-E 2.0 or 3.0. This makes the choice of a quite difficult graphics card. I read somewhere that if I install a 3.0 card gfx, it would be "backward compatible" feel, he would work on a 2.0 interface (isn't that backward compatibility option depends on the entirely gfx card?) Some cards him and others not so I'm not mistaken).

  So, this is the case with this model, or it is indeed a 3.0 interface?

  Could I install a 3.0 card gfx or 2.0?

  Thank you.

  jdj9

  PCI-E 1.0 or 2.0 are very good.  PCI-E 2.1 or 3.0 may or may not be backward compatible. Some R4 R5 R9 of R7 of Sapphire cards do seem to work in older systems like the precision, etc. 490.  I used an ASUS GDDR5 PCI-E 3.0 GT740 and it worked fine in my 745.

  The problem is that the profile for the 16 x power plug changes with version 2.1 and 3.0.  In addition, Sapphire will show they don't support UEFI BIOS systems with their R series cards.

  It is also why the older variety of version 1.0 or 2.0 cards often are not seen at all on the bus 3.0 on new computers.

  The Asus EAH6450 works very well in all models of Dell, in that I have tried.

  Not compatible with USFF or Micro because they have no slots.

  The only new parameter is the secure boot must be extinguished and CSM on for some cards to post.

  ASUS EAH 6450 SILENT card fits all models of Dell who have a Slot PCI - E, meaning that it does not work with USFF due to no expansion slot. The 6450 a 2 X the number of shaders as the 5450 doesn't.

  cs_setInnerHtml ('video_3f98d004-6424-4472-b955-c5b98d6fe85f', ");

  (Cooler) higher performance can be had from ASUS GT740

  GT740-2GD3-CSM 2 GB

  http://www.Newegg.com/product/product.aspx?item=N82E16814121877

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439

  

  

• Where can I buy a replacement for Optiplex 9020 Mini-Tower power?

  Where can I buy a replacement for Optiplex 9020 Mini-Tower power?

  I don't see anywhere on the Dell website to buy it.

  jayfie

  The OptiPlex 9020 MT supports / requires Dell exclusive 290w, a standard ATX power supply with connectors main motherboard 20/24 pin for power are not compatible, there is no details compatible power supplies available.

  You will need to contact Dell spare parts @ 1-800-357-3355 sales team, to a replacement unit.

  Bev.

• OptiPlex 3020 - want to install sc evga NVIDIA GeForce GTX 760

  IM wondering if I can not install sc evga gtx on dell 760 3020

  James8349

  IM wondering if I can not install sc evga gtx on dell 760 3020

  James8349

  The EVGA GTX 760 graphics card, is not compatible with the Mini OptiPlex 3020 Tower.

  The EVGA GTX 760 4 GB 256 - Bit GDDR5 PCI Express 3.0 Support SLI SC 4 GB video card requires 500w or more power.

  The OptiPlex 3020 MT supports a power electric Dell exclusive 290w that cannot be upgraded, as there are has no detail compatible power supplies available.

  See pages 19-20 of the operating instructions here:

  http://www.Dell.com/support/manuals/us/en/19/topic/OptiPlex-3020-desktop/OPT3020MTOM-v1/en-us/GUID-9CCD6D90-C1D1-427F-9E77-D4F83F3AD2B6

  Bev.

• HDD 2.5 "Caddy Optiplex SFF 9020

  We ordered a couple optiplex 9020SFF systems with 3.5 "hd we want to replace the hard drives 2.5" HD of (ssd + small harddrive normal) can someone tell me the partnumber dell for the correct caddy? (2 * 2.5 ")

  Stephan-thevalley

  You have a dell refers to the "Optiplex 3020 7020 9020 2.5 inch caddy?

  The Optiplex 3020 7020 9020 R494D 2.5 inch caddy fits inside the DN8MY 3.5 inch blue caddy for the tower.

  Office and MFS have different parts for the internal 3.5 caddy numbers, but that's okay because the R494D converts the 3.5 on a medium that holds 2.5-inch disks and then snaps into the 3.5 caddy.

  cs_setInnerHtml ('video_6f72d973-cc93-4df5-b9f0-fb89aae8f1fd', ");

  The adapter Silverstone has all a standard 3.5 HDD mounting points ", and it's only $8 with free shipping. She holds two 2.5 "stacked devices.

  

  

• OptiPlex 3020 TSRI support

  Hello

  Optiplex 3020 supports the technology Intel Rapid Storage Technology. Is it possible to create a volume RAID-1 with TSRI added a 2nd HARD drive?

  If so, is it mandatory to reinstall Windows 7 from scratch?

  Hello!  Not that I know 100%, but I doubt that it supports TSRI.  TSRI seems to set up the consumer according to the systems rather then trade what I've ever seen.  Regardless if it was to be available, you will need to wipe the hard drive and start over like you would go interface AHCI HDD to a RAID interface that TSRI uses. Since the SSD prices continue to fall, TSRI seems fallen passing nearby.

• Two monitors for Optiplex 3020 small format

  Just got my OptiPlex 3020 small form today. Noticed right away that a single output to a monitor. After the trip to Best Buy and learning that a regular video card will not fit my turn, no one knows how to reach two monitors to a small Tower? Thank you!

  I went with a Display Port-HDMI adapter and it worked perfectly. As soon as I plugged both monitors, the computer read and gave me access dual monitor without having me to do anything.

• 17-x014ur HP: HP 17-x014ur held for second HDD

  I want to know, if in my laptop is the place for the second hdd? I can't find a plug about it on the site

  There is no profit. It is what it is. A SATA M.2 connected via the same port as a 2.5 inch SATA SSD will perform about the same. If your laptop computer has the necessary hardware to install a 2.5 inches WHAT SATA SSD, but you would have to buy additional hardware to operate a m2 drive the and you will get nothing in performance. Seems an easy decision what to do.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite Pro A300 - can I add a second HDD?

  Hi Forums,

  I have an A300 PSAGDA-02000R and was wondering if it is possible to add a second HDD to it. After I removed the Panel to inspect where the second HDD going, I discovered that there is no connector, so I was wondering if you bought or have Toshiba install a second series of connectors?

  any response would be great

  Thank you F1R3F1GHT

  Hello

  > where will the second HDD, I discovered that there can be no connector
  That means that you can add a second HDD. That's fact!

  The fact is that all the A300 models using the same case but if you can connect a second HDD it according to the motherboard. This connector is attached to this topic and you can therefore add one such connector.