Security Center: can not turn on

Similar Questions

• does anyone know why my Security Center can't turn on the only show a message (windows Security Center cannot be started)

  does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?

  If someone help me I thank a lot.

  Hi belizariocruz cruz,.

  ·         You receive an error with the message code?

  ·         What is the operating system installed on the computer?

  This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.

  Note: The following can be used for Windows Vista and Windows 7.

  Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log .

  c. Select "this account" click on the Browse button, type Local Service and click ok.

  d. type the password and confirm the password and click ok.

  Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Security Center can't turn on Windows Firewall. Turn on manually.

  Recently, I uninstalled Trend Micro Internet Security, which had a firewall.  After the installation of Trend Micro Titanium Maximum Security, which does not have a firewall, I realized that I need to enable Windows Firewall.  I get the dialog box that says Security Center cannot enable the firewall of the window and turn it on manually.  Well, I can't get it in market.  I ran many spyware controls and is not on my system.  I found that the WMI repository is consistent.  What to do next?  I ran an sfc/scan now and he said he found corrupt files.

  Try this to restart Windows Firewall...

  Start button > in the search box, type services > press > scroll down to find the Windows Firewall, click...
  topic status, it should be... Has begun
  under Startup Type, it should be... Automatic
  If it does not say that right home by a click, click Properties > in this window, make the necessary changes...
  Startup type on... Automatic
  The service status for... Beginning
  Click Ok > OK again. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• In Vista, Security Center will not turn on

  Hello

  I recently had a repair & must have re-installed vista. I have removedavast the shop put away, but still have malware (anti malwarebytes) installed.

  I was not able to turn on my Security Center. I've followed all the instructions/support forum, but the local system is showing an account User1-PC that does not exist. I don't have a single account user defined as an administrator who has a different name & all.

  Certainly something I attack my IE & I can't update to IE9 - it says that my service pack is not supported.

  can anyone help with these problems please

  Thank you

  Hello

  1. How have you installed Internet Explorer 9?

  The system should be an upgrade of the repair that there are errors in the system files.

  We need to uninstall Internet Explorer 9, perform the upgrade in-place, and then try again to install Internet Explorer 9.

  Method 1

  You can uninstall Internet Explorer 9.

  How to install or uninstall Internet Explorer 9?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  Method 2

  You can perform the upgrade on Windows 7 site.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: Make sure that you all that you save the data to an external hard drive before you perform an upgrade on Windows 7 site.

  Method 3

  You can download and install Internet Explorer 9.

  Download Internet Explorer 9

  http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• Security Center can't turn on

  Have analysed system and 3 virus found... all cleaned up. but get the message: could not start the windows Security Center service.

  Hello
  Your computer is still infected by malicious software. Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
  Brian

• Windows Security Center can not be activated

  When I go to the Windows Security Center, this indicates that the Security Center service is disabled. When I click the 'Activate now' button, a popup from Windows Security Center says "cannot start service Security Center" what should I do.
  Thank you
  Lou

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (They leave leftovers that cause
  strange questions.).

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Security Center will not be on

  Original title: windows Security Center

  Windows Security Center can't turn on, it lights up!

  Hello

  ·         What is the error message you get when you start the windows Security Center?

  Step 1: Start the Microsoft Fix It: http://support.microsoft.com/mats/windows_security_diagnostic/en-us?entrypoint=lightbox

  Step 2: Check services.

  a. Start button > in the search box, type Services and press enter

  b. scroll to find the Security Center, click on it

  c. topic status, we should have started and the Startup Type, it must be said, automatic

  d. If she doesn't say it, right click on the Security Center > click on properties of Startup Type, click on the pointer to the right and select Automatic (delayed start)

  e. the service status, click Start

  f. click OK when finished.

  See alsohttp://social.answers.microsoft.com/Forums/en-US/w7security/thread/d8250e7a-ee3c-4302-8ca6-9e2a10262feb

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't turn on my firewall. My Security Center will not display informfation on the firewall

  We had malware on the computer, but deleted. Since this incident, I was unable to turn on the firewall and Security Center does not have information on the firewall. I've deleted and reinstalled security essesntials but it has no effect on the problem

  Hello
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2
   
  http://support.Microsoft.com/kb/914230
   
  Method 2
   
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us?EntryPoint=lightbox
   
  See also,
   
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
   
  http://support.Microsoft.com/kb/283673
   
  How to recover from an infection of computer virus and how to prevent future infections from computer viruses in Windows operating systems
   
  http://support.Microsoft.com/kb/940831
   
  I hope this helps.

• Can not turn Security Center on, error 0 x 80070424

  I can not turn on Security Center; I get the Ox80070424 error message.  How can I solve this problem?

  Hi Lillie B.

  I see you get error 0 x 80070424 while trying to turn the Security Center. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  I suggest you to consult and follow the steps in this article and check.

  Windows Update, error 80070424: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80070424

  Method 2.

  I suggest you to consult and follow the steps in this article and check.

  Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall: http://support.microsoft.com/kb/968002

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows XP: 322756 (http://support.Microsoft.com/kb/322756/fr/)

  For Vista: Back up the registry: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on

  I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on.  What should I do?

  Hello

  · You have a third-party security software installed on the computer?

  · What is the error message that you receive the error code when you try to turn it on?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Make sure that the Security Center service is configured properly, and then start the Security Center service. To do this, follow these steps:

  a. click on start, click on run

  (b) in the Open box, type services.msc

  c. on the right side of the window, locate the Security Center service in the list of services.

  d. right click on Security Center, and then select Properties.

  e. in the drop-down list startup type, select Automatic (delayed start).

  f. under service status, click Start.

  g. click on apply, click OK, and then close the Services window.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• I can not turn on Microsoft Security Essentials anti virus and later moved it not update.

  I can not turn on Microsoft Security Essentials anti virus and later moved it not update.  The system is Vista and update 80070643 error code.

  Additional references may include:

  [MMS] Installation error 0 x 80070643
  http://answers.Microsoft.com/thread/908fad3e-F9FC-4d8a-BE83-ae7d3bc48db5

  Checklist for installation of Microsoft Security Essentials
  http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

  Microsoft Security Essentials Support Forums (all)
  http://answers.Microsoft.com/en-us/protect/Forum

• Windows Security Center will not respond, disabled Malwear cant turn it on?

  as mentioned above the screen of my computer kept going as well until I did a scan now that's fine. but the Security Center does not always react and my computer keeps freezing. I have avg that works very well.

  Hi Dar311,

  1. don't you make changes before the show?

  Step 1: Virus scanner online
  a. visit http://onecare.live.com/site/en-us/center/whatsnew.htm
  b. click "full service scan.
  c. scan the computer and remove the infected files.

  Step 2: Run SFC (System File Checker) scan to find and repair missing or corrupt system files and check the result. To do this, try the following steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Step 3: Check if a non-Microsoft program is at the origin of the problem
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that another non-Microsoft program is causing the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not turn on automatically updates.

  Automatic updates will not not turn on. I use Windows XP, SP3. I use the Micro Soft Security Essentials I goto the Security Center to turn on the automatic updates but it does not allow me to do. The light is red, not green.

  Any help?

  Hi Tim,.

  Were there changes to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Check out the link:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261/en-us

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• XP SP3 Security Center will not suddenly Norton Internet Security recognize?

  Windows XP SP3 Security Center won't recognize all of a sudden of Norton Internet Security. It has been fine for years. I don't have a virus.

  How to fix problem?

  Hi Chris,

  Thanks for posting your question in the Microsoft Community forum. I understand that XP SP3 Security Center will not recognize Norton Internet Security. I would like to help solve you the problem.

  This problem may occur if there is an inconsistency in the system files or folders associated with XP Security Center. Follow these methods:

  Method 1.

  Disable the firewall and check if that helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? : http://support.microsoft.com/kb/283673

  Note: you should not disable Windows Firewall, unless you have another firewall is activated. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 2.

  Rename the storage folder.

  1 - Go to control panel, and then open administrative tools.

  2 - click on Services.

  3-go down to Windows Management Instrumentation and stop this service.

  4. stop the Security Center service.

  5-exit and close all windows.

  6. right click on start and select explore.

  7. go down to C:\windows or Winnt\system32\wbem\repository.

  8 remove only the storage folder

  9-go Back To Services and restart the WMI and the Security Center service.

  10. close all windows and restart the computer.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• My windows Security Center does not open and I get a notice that "no software firewall is detected.

  My Windows Security Center does not open, and I am also unable to turn on my firewall.  I get notification "not detected any firewall software.

  Hello

  It seems that you need help to solve the problem of Windows Security Center. Please respond to the suite, which will help us to help you in the right direction.

  1. do you get an error message when you try to turn on the firewall?

  2. which antivirus app do you use?

  Refer to the following information and check the status of the issue.

  See the section "Nithyananda J replied on November 27, 2009" what about Windows Security Center

  The windows Security Center service cannot be started.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Windows-Security-Center-service-cant-be/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  I also suggest you to run the Fixit from the following link.

  Diagnose and automatically fix problems of Windows Firewall service.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  You can also try to solve the problem by running SFC scan

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.