XP SP3 Security Center will not suddenly Norton Internet Security recognize?

Similar Questions

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• PlayReady in Media Center will not update.

  PlayReady in Media Center will not update.  The message is "PlayReady update was incomplete.  "You can watch or save protected content until the update is successful.  All attempts to return the same error.  Netflix also only a black screen shows when you watch a movie.  Live TV works except HBO which is protected against copying.  How can I fix?

  Hi William,.

  Thanks for posting your query in the Microsoft Community Forums.

  From the problem description, I understand that you have problems with the PlayReady Media Center update on Windows 8 computers. I will certainly help you in this regard.

  Try these methods and see if it makes a difference.

  Method 1
  Loan will not update if the date is wrong. I suggest you to check if the system date and time is correct.

  Method 2
  Temporarily disable your firewall settings and check if you are able to update.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  
  Method 3

  Open Windows "Services" via the Control Panel > Administrative Tools > Services.
  With Media Center open and show "the PlayReady update was incomplete. Do you want to retry? "Go to the 'Services' Panel you just opened and scroll all the way up to"Services Windows Media Center Receiver", double-click it, then click on"Stop ".

  Navigate to the folder ReadyPlay HIDDEN (C:\ProgramData\Microsoft\PlayReady), and then delete the mspr.hds file.

  Return to the OPEN & CONTINUES, Media Center and click 'Yes' and 'Next' to the question of the PlayReady update. He should immediately zip past and say update complete & you can watch and record the protected against copying.

  Carry out these methods and let us know if you need more assistance. I'll be happy to help you.

• My iphone will not suddenly be updated to icloud photos?  It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc...  can anyone help?  well worked yesterday and now not...

  My iphone will not suddenly be updated to icloud photos?  It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc...  can anyone help?  well worked yesterday and now not... most of the time the number of photos don't match same new how I am download to icloud...

  Have you tried the signature to iCloud and then reconnect?

  Try a reset.

  Reset device

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• Window Media Center will not configure my Xbox says that there is an error in moan by train

  Window Media Center will not configure my Xbox says that there is an error in moan by train

  Hello

  What is you get the exact error message?

  Please follow the steps mentioned in the links below.

  Set up a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  You tried to set up your console Xbox 360 as a Media Center Extender, but the installer is not started

  http://support.Microsoft.com/kb/916180

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Media-Center-FAQ

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• Windows Media Center will not stop to come when I click on my user name

  Windows Media Center will not stop when I click on my username to come...

  Hello
  Try to create a new user account and transfer the files from the user account damaged to the new user account
   
  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• HP Solution Center will not install

  I installed the F4180 Deskjet on my Windows 2000 computer.  Printer works fine but I wanted to check the ink levels and could ' t find the HP Solution Center software.  No registration under program files.  So I released the CD and tried to install again.  There was never an indication that he was installing the Solution Center or HP photosmart software.  So I clicked on run and entered in D:/Setup/SolutionCenter.  It finds the file solutioncenter.msi and a list of zip files that are identified as central to solution.  I have dbl. solutioncenter.msi-click and I get the message "Setup has encountered an unexpected error installing this package.  This may indicate a problem with this package.  The error code is 2732. "So I uninstalled everything and only reinstalled under mode in advance where I am supposed to be able to approve all items being installed.  Well it has finished installing and the last screen said there may be additional screens that appear to guide you through the intstallation of additional software.  No screens never not appeared, and I still haven't installed HP or HP Photosmart software solutions Center.  The CD is damaged?  How can I get this software?

  Thanks for your help.

  The Solution Center will not install on Windows 2000. It is not a bug/problem, but that's just the way it was designed (don't ask me why). If you need to check the ink level, then you have to go to the Toolbox of the printer on the printer properties page.

• OfficeJet 8500 Solution Center will not load

  Solution Center will not load.  Error message: "HP Solution Center cannot work because your installation of the device is not complete."  Solution Center has worked for 3 years and no recent update of the software of the printer have been made.  Solution Center has been removed and reinstalled using the CD of HP.  This does not solve the problem.  Model is A909g, number CB023A.

  Hi there @MarianGrad welcome in the community!

  I understand that you see the error 'Solution Center cannot work because your installation of the device is not complete'. I have a few links below for you to view other messages and forums with other users with the same issue. They can help. If the problem persists, let me know which operating system you are running and the troubleshooting steps you have tried.

  HP solutions Center can not run because your device installation is not complete. What should I do?

  "HP Solution Center cannot work because your device installation is not complete."

• Media Center will not register a particular channel, but all other records very well

  Hello, I can not Media Center to record a particular channel unless I am diverted listed steps below.  I get all the live channels.

  -the channel, I can't save is 30.1 in Memphis, TN (subsidiary CW) channel

  -My tuner: AVerMedia AVerMedia Duet - PCTV Tuner (A188 - white box) Interface PCI-Express x 1 MTVHDDUWB

  When I try to record a program at any time on channel 30, Media Center loses signal.

  While playing with it, I discovered that I can click to save while watching channel 30, then after that Media Center loses signal, follow these steps:

  Reach

  Settings/TV/TV Signal / Scan for multiple channels

  So, I have to empty the scanned channels and re-scan.

  Then it will start to record the channel 30.1.

  Help, please!  Why Media Center will not record 30.1 without all this trouble?

  Thank you

  Kris

  Go to settings-guide-add missing channels. Type in right channel # (like 8.1). Then put in the right frequency for the over-the-air station (35 in my case). You can find this info here (http://www.antennaweb.org/aw/welcome.aspx) if necessary. Now, you will have 2 channels in guide for 8.1 lists. Right-click on the new guide that lists you just create and go change the channel-edit lists. Change the source from the list to the channel that you have problems with. Next pass parameter-signal digital tv signal strength and a Coachman television that did not properly record to remove the Guide channel. This will fix your problem.

• BlackBerry Smartphone app Center will not close! Help!

  I don't know if anyone has faced this... but my app Center will not close!

  When I pressed the bb and the small menu appears in the center of the app are still there... If I click on it it does nothing.

  I tried to reboot (battery and everything), opening center app (just opens a new one out while both are open)

  I don't know what happens >.

  also on a side note... a small blue apperaed icon next to my bars of reception with a symbol in it... i can look for that when I get home... but I didn't know that until today...

  The application Center never closes.

  you will always have a minimum of 5 'applications' running:

  App Center

  Browser (make sure that it is not on a web page)

  Home

  Mail

  'Call' screen

• Windows Media Center will not work

  Windows Media Center will not run.
  Using Windows 8.0 Pro with Media Center
  Version: 6.2.9200

  Application error:
  Name of the failing application: ehshell.exe, version: 6.2.9200.16384, time stamp: 0x50109c45
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
  Exception code: 0xe0434352
  Offset: 0x0000000000047b8c
  ID of the process failed: 0 x 318
  Start time of application vulnerabilities: 0x01d041a3b75a3eb4
  The failing application path: C:\Windows\ehome\ehshell.exe
  Path of the failing module: C:\Windows\system32\KERNELBASE.dll
  Report ID: f6eacea1-ad96-11e4-be9e-681729142589
  Faulting full name of the package:
  ID of the failed package-parent application:

  .NET runtime:
  Application: ehshell.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception details: System.InvalidOperationException
  Battery:
  at Microsoft.MediaCenter.Store.ObjectStore.Open (System.String, System.String, System.String, System.Reflection.Assembly, Boolean)
  at Microsoft.MediaCenter.Store.ObjectStore.Open (System.String, System.String, System.String, Boolean)
  at Microsoft.MediaCenter.Store.ObjectStore.AddObjectStoreReference)
  at Microsoft.MediaCenter.Store.ObjectStore.get_DefaultSingleton)
  at ServiceBus.UIFramework.UserControlPoint.Launch (System.String)

  Support Microsoft Search, community and Internet research and

  Tried the following with no results:
  -System restore
  SFC/scannow (no error)
  -Enable Windows features and disable.
  -WMC disabled WMC, restart, turned his back on back
  -Turned .net framework, stop, reboot, turned their backs
  -Re-record files associated with Windows Media center.
  -regsvr32 jscript.dll
  -regsvr32 vbscript.dll
  -Troubleshooting
  -Windows Media Player DVD - No problem
  -Windows Media Player Library-corrupt-fixed
  -Windows Media Player settings-fixed
  -Rebuild the Media Center data store.
  -%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB (the file does not exist)
  -Ran as administrator

  This error points to the mcstoredb.dll which can indicate a corruption of the data bank:

  GIS [3]. Name = Signature of the 04 problem
  GIS [3]. Value =mcstoredb

  Try the following method 2 in the MS article to rename the mcepg2 - 0.db and other file with extension .db in the folder C:\ProgramData\Microsoft\eHome to rebuild the Media Center data store.

  http://support.Microsoft.com/kb/2400410/

  Article is for Windows 7, but should also work for Windows 8.

  You may have to restart the computer later,

• HP dv6815nr: Wireless Card will not connect to internet

  Hey people, trying to make my old laptop back to semi in working order.  Did a fresh install of Vista, but the wireless card for some reason any will not access the internet, says "local use." Internet works as the other computers in the House are connected on the wireless and when I connect the ethernet, features of connectivity cord.  Crossed and uninstalled/reinstalled the driver.  I have no special security here, just the windows firewall, which I disabled the thought that he could block, but it was not the question.  Other ideas you can come up with that would be great.  I have also included the hardware ID for my wireless card.  Pilots have been taken off this site from hp for my computer model as well.

  PCI\VEN_168C & DEV_001C & SUBSYS_137A103C & REV_01

  Hello:

  You need to install a driver update... the problem is probably your router is too new for the old driver wireless deal.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  Go back and activate your firewall if you have not already done so.