Security Center can't turn on

Similar Questions

• does anyone know why my Security Center can't turn on the only show a message (windows Security Center cannot be started)

  does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?

  If someone help me I thank a lot.

  Hi belizariocruz cruz,.

  ·         You receive an error with the message code?

  ·         What is the operating system installed on the computer?

  This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.

  Note: The following can be used for Windows Vista and Windows 7.

  Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log .

  c. Select "this account" click on the Browse button, type Local Service and click ok.

  d. type the password and confirm the password and click ok.

  Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Security Center can't turn on Windows Firewall. Turn on manually.

  Recently, I uninstalled Trend Micro Internet Security, which had a firewall.  After the installation of Trend Micro Titanium Maximum Security, which does not have a firewall, I realized that I need to enable Windows Firewall.  I get the dialog box that says Security Center cannot enable the firewall of the window and turn it on manually.  Well, I can't get it in market.  I ran many spyware controls and is not on my system.  I found that the WMI repository is consistent.  What to do next?  I ran an sfc/scan now and he said he found corrupt files.

  Try this to restart Windows Firewall...

  Start button > in the search box, type services > press > scroll down to find the Windows Firewall, click...
  topic status, it should be... Has begun
  under Startup Type, it should be... Automatic
  If it does not say that right home by a click, click Properties > in this window, make the necessary changes...
  Startup type on... Automatic
  The service status for... Beginning
  Click Ok > OK again. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Security Center: can not turn on

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: can depend on a Security Center. Right click and the button start is not bold. How can I restore it? I use windows vista and can not understand the system restore?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't 'Windows Security Center Service' to turn on.

  I get a warning message on the taskbar, declaring: "TURN ON CENTER OF SECURITY WINDOWS SERVICE.  (IMPORTANT). But whenever I try to click on, I get the same message saying: "WINDOWS SECURITY CENTER SERVICE DO CAN DO NOT BE TURN ON". Please can someone advise? I tried everything last week. Thank you. Dazpicton.

  Hello

  ·         When did you start in this topic?

  (1) check if you can manually start the service. Also check the dependency services.

  a. type Services in the search field and press ENTER. You will need to click on continue if you are prompted to open the Services window.

  b. in this window, you must locate the Security Center service right click and select Properties.

  c. now, select automatic, and then select start. When the service fails to start, you will receive an error message.

  d. also, click the Dependencies tab and check if everything which are started and set as auto.

  Post the error information here so that we can better understand why the service fails to start.

  (2) as a Virus scanner.

  You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the agreement.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Security Center can't be started

  I try to turn on Security Center and I always get the message "Security Center cannot be started."  I've restored all the values by default and internet security and don't know what else to try.  Can anyone help?

  Click Start, type Services.msc
  Double-click Security Center
  Set its startup in type automatic
  Click Start the beginning of the service.

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• In Vista, Security Center will not turn on

  Hello

  I recently had a repair & must have re-installed vista. I have removedavast the shop put away, but still have malware (anti malwarebytes) installed.

  I was not able to turn on my Security Center. I've followed all the instructions/support forum, but the local system is showing an account User1-PC that does not exist. I don't have a single account user defined as an administrator who has a different name & all.

  Certainly something I attack my IE & I can't update to IE9 - it says that my service pack is not supported.

  can anyone help with these problems please

  Thank you

  Hello

  1. How have you installed Internet Explorer 9?

  The system should be an upgrade of the repair that there are errors in the system files.

  We need to uninstall Internet Explorer 9, perform the upgrade in-place, and then try again to install Internet Explorer 9.

  Method 1

  You can uninstall Internet Explorer 9.

  How to install or uninstall Internet Explorer 9?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  Method 2

  You can perform the upgrade on Windows 7 site.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: Make sure that you all that you save the data to an external hard drive before you perform an upgrade on Windows 7 site.

  Method 3

  You can download and install Internet Explorer 9.

  Download Internet Explorer 9

  http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• Security Center must be turned back!

  I have Windows Defender and constantly face the Microsoft Security Center window. He has to go.  Also, My Windows Security Center is turned off and I can't turn it back on... can help you?

  Hello

  As you mentioned in the previous thread that your password is not accepted, you can try the following steps and check if this solves the problem.

  Step 1:

  You can check the status of the Windows Security Center service and its dependent services. If it is stopped, start it and check for the issue.

  a. type Services in the search field and press ENTER. You will need to click on continue if you are prompted to open the Services window.

  b. in this window, you must locate the Security Center service right click and select Properties.

  c. now, select automatic, and then select start. When the service fails to start, you will receive an error message.

  d. click the Dependencies tab and check if everything which are started and as automatic.

  Step 2:

  You can also check the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Windows Security Center won't turn on!

  Hello
  I recently tried to download something on which my McAfee jumped up to tell me that Trojans had been detected and removed. Needless to say, I deleted that has been downloaded.
  Since that incident, my Microsoft Security Center was off and on again, whereas before it had worked, even with my McAfee.
  Also had problems with Windows Defender, which does not at all, even though reading some other questions in the forum, I summised that he is a McAfee-Defender compatibility issue and followed the steps recommended to turn off defender.
  Downloaded SUPERAntiSpyware and am currently running so far, no threat detected.
  I am at a loss to know what to do now to unravel the Security Center!
  I am running Windows Vista Home Premium.
  Help, please!
  Gianne

  Hi Steve,.

  Thanks for posting on the Microsoft answers Forums.

  You please try and run a restore of the system to a date and a time before when you installed the program prompted by McAfee to say you had a virus.

  To restore the operating system to an earlier point in time, follow these steps:

  1. click on Start, type System Restore in the Search box, and then click System Restore in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  2. in the System Restore dialog box, click choose a different restore point, and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on Finish.

  All the steps listed above comes from the following article: (feel free to refer to this article if you want more details.)

  http://support.Microsoft.com/kb/936212

  Please post back and let us know if you could use Windows Media Center after you do a system restore to a date and time before the error.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After an automatic update by McAfee SecurityCenter, Windows Security Center can't detect that McAfee is installed.

  Today, McAfee SecurityCenter automatically updated itself in version 10.5. Following this update, Windows Security Center detects that McAfee is present on the system, but McAfee reports that it is fully operational.

  I already tried to solve the problem using a technique of prompt involving repository.old - on the advice of McAfee support - but it did not work. The McAfee account is held by a member of the family, it is not possible for me to access for re - download the software. Is there anything else I can do?

  This is problem with McAfee and I suggest request support to help you, but you can also try to update Windows and make sure you havelatest service pack and also check you might be able to upgrade to the version of newser free McAfee.

• Security Center can't change your automatic update settings

  Hi friends

  I changed my 'UI language' from German to English and since then my "windows update" does not work. When I goto "Windows secirity center" and try to change it to auto update (which was the case previously), it says "Security Center is unable to change your automatic update settings" and below, ' change settings manually "." but when I click on this option, a window flashes and disappears.

  I've tried the suggestions in the following thread

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/690a7c05-12E3-45D1-967C-f9cab7cf69dd/

  but NO CHANGE

  Any suggestions would be greatly appreciated.

  Cissokho

  This thread is perhaps more relevant:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f793dfa8-59a7-4112-9184-092119d469e8 TaurArian [MVP] 2005-2010 - Update Services

• Windows Security Center can not be activated

  When I go to the Windows Security Center, this indicates that the Security Center service is disabled. When I click the 'Activate now' button, a popup from Windows Security Center says "cannot start service Security Center" what should I do.
  Thank you
  Lou

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (They leave leftovers that cause
  strange questions.).

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My Security Center has been turned off and I can't turn it back on.

  two things that Spybot found

  WindowsSecurityCenterDisabled_disabled

  Win32FaudLoad.EDT

  Run the full scan of the system with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  And then run these tools:

  http://support.Microsoft.com/mats/windows_security_diagnostic/

  http://support.Microsoft.com/mats/Malware_Prevention/

• Windows Security Center will not be on

  Original title: windows Security Center

  Windows Security Center can't turn on, it lights up!

  Hello

  ·         What is the error message you get when you start the windows Security Center?

  Step 1: Start the Microsoft Fix It: http://support.microsoft.com/mats/windows_security_diagnostic/en-us?entrypoint=lightbox

  Step 2: Check services.

  a. Start button > in the search box, type Services and press enter

  b. scroll to find the Security Center, click on it

  c. topic status, we should have started and the Startup Type, it must be said, automatic

  d. If she doesn't say it, right click on the Security Center > click on properties of Startup Type, click on the pointer to the right and select Automatic (delayed start)

  e. the service status, click Start

  f. click OK when finished.

  See alsohttp://social.answers.microsoft.com/Forums/en-US/w7security/thread/d8250e7a-ee3c-4302-8ca6-9e2a10262feb

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Security Center turned off; are not not in Services...

  Issue of Microsoft Security Center

  Running Windows7 Home Prem 64 bit...

  Action Center displays an alert;

  Windows Security Center service (Important) turn ON NOW

  When I click on tour now I get... .it cannot be started.  When I develop the alert I see bed that UAC will notify when programs try to make changes to the computer on and OFF Network Access Protection.

  I went to the 'Services '... Security Center service is not in the list...

  How can I remove this alert in the center of the Action?

  When I ran

  wscsvc net start at the command prompt I got 'the name of the Service is incorrect.

  The problem is with a PC of a close friend and I take possession of his PC remotely.  My PC has a Prompt command link in my Start Menu... its actually not.  So I started his command prompt by typing CMD is the Start Menu... my point, when I run CMD on my PC I can right-click on its icon in my Start menu and click on administrator.  With my friends PC... I typed CMD to get to a CMD prompt... I do not run as administrator.  But was it had to be run as an administrator, I would have thought that the message would read "a need administrator...". "and not that it's an invalid service.

  Microsoft provides some Free OS Security Support tech... call qualify this problem and if so, how many would we?

  This is not to say that I would be unwilling to continue to solve the problems... but if we are out of options here... then it would be time to contact Microsoft.

  Furthermore, is it possible to create an icon for the command prompt?   How?

  Check if you have any other antivirus software. He could have disabled Security Center service.

  SFC scanner-

  http://support.Microsoft.com/kb/929833

  To create a shortcut icon, go to C:\windows\system32\

  Search for cmd.exe.

  Right click and send to desktop (create shortcut)

  Run the troubleshooter-

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Try these:

  http://Winhelponline.com/articles/66/1/fix-Windows-Security-Center-service-does-not-start.html

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/b8a0afef-776e-4587-A694-113e40c41206