Security on Windows 10

In spite of having relatively few problems by running security software, that I currently have, I had Facebook that I personally know people who have put malware on my PC from their computers at home; either way, they did this Linux system. This malware has interfered with programs like MS Word 2010. and others

This malware will disappear or something else after the upgrade and not this upgrade offers better security to prevent hacks like this does not happen?

Not all anti-virus programs can detect malware, there are many occasions where you must run a separate utility malware scanning

Malware has nothing to do with the operating system used

It's free http://www.malwarebytes.org/antimalware/

Tags: Windows

Similar Questions

  • Avast internet security with windows 7 Professional compatibility

    Avast internet security with windows 7 Professional compatibility

    before you buy this HP I had avast internet security paid license

    can install this program in my HP without problem?

    tank you very much

    Francisco

    Francisco,

    You could simply stop the Microsoft Essentials if it's getting in the way.

    Prevent the Microsoft Antimalware Service starts automatically

    If you cannot find the software under the name mentioned in the article, locate the service called Windows Defender.

    The same rule applies: set the service to manual start or disable the service.

    =========================================================================

    Opinions differ on the question of whether Microsoft Essentials / Defender should indeed be removed or If disabling services is sufficient.

    Pouvez Avast! Pro co-exist with MS Security Essentials?

    My 8.1 or OS systems, Windows Defender has been disabled (together) - no problems with Avast first.

    =========================================================================

    For your peace of mind, you may contact Avast and ask their opinion with reserve.

    Avast, support

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • The basic service of the TPM secure in Windows 2003

    The basic service of the TPM secure in Windows 2003 is configured to run automatically, but it stops. When you try to start it, I get the message "the TPM Base service on started and then stopped. Some services stop automatically if they have no work to do... "This is the normal behavior for this service? If supposed to work, what can I / check?

    Hello

    The question you have posted is related to the Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

    Thank you.

  • A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

    Original title: HELPPPPP

    My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

    Hey ChelseaHarris,

    Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
    Could not start the Windows Security Center service.

    If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
    Microsoft safety scanner

    Hope that helps.

  • Cannot download the update from microsoft > update security for windows media encoding for windows xp and windows server 2003 kb2447961

    I am running HP pavillion A1130n desktop computer > problem > I can not IN stall Microsoft Update > update security for windows media 9 for windows xp and windows server 2003 kb2447961 of coding... .e send me a response message. > * E-mail address is removed from the privacy *.

    Hello

    1. don't you encounter any error message during the installation of this update?
    2 is this problem limited to this particular update?
     
    I ask to download the update manually and then install it.
    Here is the download link:
    A security update for Windows Media Encoder 9 Series for Windows XP and Windows Server 2003 (KB2447961)
    http://www.microsoft.com/downloads/en/details.aspx?familyid=EF0ADA2C-965F-438F-A1D3-BD45DB8460C1&displaylang=en.
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot install the update of security for Windows XP (KB982665)

    Original title: security update/install failures

    Siena is a re-post using the appropriate format: when I check for Microsoft updates I hit the express tab and most of the time I get the message 'install (s)' didn't like in whne I tried to download and install the 'a security update for Windows XP (KB982665)."  It is the rule, not the exception.  What should I do, please?  Thank you!

    Hi ubancosr,

    Try to download and install the update manually and check.

    Update security for Windows XP (KB982665)

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5DDB5E34-F97A-47C6-96C8-BA2ED06CCB77&displaylang=en

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Encountered the error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198)

    I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).

    I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.

    Ran the update without any firewall or AV program running and still received the same error.

    AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.

    Hi a93svtf,

    This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.

    Step 1: Run the fixit available in the article below

    You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

    http://support.Microsoft.com/kb/910336

    Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Now, try to install the update

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • update security for Windows XP

    I use to install update security for Windows xp KB9811349, but their still another day KB956802, KB979683 KB970238, KB978338, what should I do for this new upcoming update KB numbers are lower than the 1st one i rescently installed

    Hello

    The KB numbers have nothing to do with these updates. Each number is just used to identify a particular update.

    The number you see on Microsoft Update, Windows Update, or in the last security bulletin on the security updates page corresponds to the ID of the Base knowledge Microsoft (KB) article.

    Most of these updates are security patches that you really need to use your computer safely and to enhance your work PC.

    What's an update number?
    http://www.Microsoft.com/protect/computer/updates/bulletins/number.mspx

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update security for Windows Vista (KB979683)

    Update security for Windows Vista (KB979683)

    I get "error (s) found: Code FFFFFFFF.

    Help, please!

    Hello

    My friend has the same issue, you can try

    1 - run TDSSKIller

    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    2. If this does not work, try to reset windows Update components

    http://support.Microsoft.com/kb/971058

    Finally

    3 try to run SFC/scannow

    http://www.updatexp.com/scannow-SFC.html

    keep us informed

  • Update security for Windows XP (KB977165)

    Whenever I try to install this update of security for Windows XP (KB977165), it fails.  Do I really need?  What should I do to install it?  He comes back down automatically to install, but when I try to do, it will not.

    All what you need to know is here:

    http://support.Microsoft.com/default.aspx/KB/977165?p=1

    TaurArian [MVP] 2005-2010 - Update Services

  • repetition to offer even updated to "Update security for Windows XP Service Pack 3 (KB952069)"

    This same offer update I already accept and installed the update a few minutes ago and he confirmed 'Done '. The update is:

    -----------------------------------------------------------------------------------------------------------------

    Update security for Windows XP Service Pack 3 (KB952069)

    Detail:
    A security issue has been identified that could allow a remote attacker to authrnticated to make compromises
    your system and gain control over it. You can protect your system by installing this update for Microsoft. After you install this update, you may have to restart your system.

    More information for this update can be found at http://go.microsoft.com/fwlink/?LinkId=12519

    ------------------------------------------------------------------------------------------------------------------

    I have my SP3 installed correctly and successfully, after I reinstalled my Windows XP using my recovery disks approximately two weeks on my laptop. Since then, thei update offers not even after that you stop it and restart the computer. But even I accepted and installed it, this offer comes just after a few minutes.

    One can help because it is expremely boring. Thanks in advance.

    Hello

    As you get a pop up to install an update that is already installed, you can try the following steps and check.

    First of all, you can hide the update as it has already been installed.

    Follow these steps to do so.

    a. click Start and select Control Panel.

    b. click on Windows Update and click the updates available.

    c. right-click on the particular update and select hide update.

     

    Now, I suggest you to get the Windows Update components that they might have been corrupted.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    Reference:

    Windows Update or Microsoft Update repeatedly offers the same update

    http://support.Microsoft.com/kb/910339

    You can get back to us any time for other issues related to Windows.

  • Cannot install the update of security for Windows XP (KB2686509)

    original title: why my XP pro does not accept the following security update? Update security for Windows XP (KB2686509)

    Hello

    I'm not really very good which is why I chose to use automatic updates. I recently got 'updates are ready for your computer' and when I start to download it stops pretty quickly and said:

    The following updates have not been installed.

    Update security for Windows XP (KB2686509)

    Is there a wat to fix this problem without needing to know the registrys etc.

    Thank you

    Mick

    See my post on the third page of this topic which contains detailed instructions for anyone with this problem. Go to the bottom of this page and click Next until you get to page three.

    Thanks for the update Mick. You should be able to double-click the file to open it in the command prompt. I did not write the script, so I can't tell you why you were unable to launch it by double clicking. Right click and choose to run it in command line will still work.

    @ Icom756pro I do not work for Microsoft, then you would be best suited to forward your complaint directly to them. I understand your frustration, however. I can only recommend that you try the script that I've linked to page 1 of this topic. If this does not resolve the problem then simply hide the update. You should not be prompted to install later.

  • Update of system security for Windows XP 64 (KB973768) fails to install.

    Whenever I try to install this update fails.  Please, help me to update or delete this message of constant updating on my computer.  Or anything I should

    do update this Update dry. ?   Thank you Karen C

    Hello

    1. which edition of Windows Xp you are using?
     
    Example: Windows Xp home edition 32-bit
     
    2. What is the error code displayed when the update installs?
     
    Note: if the title of the update in windows update for 64-bit operating systems mentioned and if you receive this error on a 32-bit machine then you can simply hide the update as it is not applicable to your computer.
     
    Please follow the links below to solve the problem.
     
    Method 1
     
    Check if the version of the published update corresponds to your operating system.
     
    MS09-037: Description of the security update for the ActiveX control object Microsoft HtmlInput in Windows XP Media Center Edition, Windows Vista and Windows Server 2008: 11 August 2009
     
     
    If the version is correct and then try to download the update manually.
     
    Update security for Windows XP (KB973768)
     
     
    Merthod 2
     
    Try the steps mentioned in the article mentioned below.
     
    Step 1
     
    You cannot install some programs or updates
     
     
    I hope this helps.
  • Security for Windows XP KB2779030 update failed.

    I am running XP Professional on my laptop. I get the security update for Windows XP KB2779030 failed.

    Someone at - it solutions?

    Thks, Len

    Hello

    Thanks for posting the request in the Microsoft community!
    We'll get you help with the steps of troubleshooting of this will hep you by installing KB2779030 on the computer.

    Before continuing with the steps, provide us information.

    1. you receive an error message on the computer?
    2. what anti-virus software is installed on the computer?
    3. don't you make changes on the computer before the show?

    To fix the problem try the following steps:

    Method 1:
    Run the fix it and check.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2:

    Perform a clean boot and check if the third-party software are causing the issue of updating. How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

    Method 3:
    Try manually installing updates from the link:
    Update security for Windows XP (KB2779030)
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=35863

    Please respond with the information. I'd be happy to help you further.

  • I don't remember my direct question of password or the security of windows, and it's preeventing me to enter the xbox live!

    I don't remember my direct question of password or the security of windows, and it's preeventing me to enter the xbox live!

    Help me!

    If you don't remember your security question, you're probably out of luck. Now, you know the importance of keeping the records. In all cases,.

    Windows Live ID is supported in this forum
    http://answers.Microsoft.com/en-us/windowslive/Forum/LiveID

  • Update security for Windows XP KB2659262 repeatedly moved (0xD000012F error code)

    The recent update of security for Windows XP KB2659262 repeatedly failed to install, I am on Windows XP Professional with SP3. I tried to close all applications when redo this update, but the result is always a failure to install with 0xD000012F error code. Can anyone tell how to complete the update or remove the notice of update from my computer? Thank you.

    Hi Sangbin,

    You have made any changes to your computer recently?

    I suggest you to follow the steps and check if it helps.

    Method 1: Perform a clean boot, and then check if it helps.

    How to configure Windows XP to start in a "clean boot" State

    Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

    Method 2: Follow the link and run Microsoft Fix - it, and then check if it helps.

    Diagnose and automatically fix common problems with Windows Update

    Method 3: Install manually updates, then check if it helps.

    To install updates manually by following the steps mentioned below.

    (a) go to http://www.microsoft.com/download/en/default.aspx

    (b) research updates using the KB number for the update.

    (c) download and install it.

    Method 4: Reset Windows update components, and then check if it helps.

    How to reset the Windows Update components?

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

Maybe you are looking for