The basic service of the TPM secure in Windows 2003
The basic service of the TPM secure in Windows 2003 is configured to run automatically, but it stops. When you try to start it, I get the message "the TPM Base service on
Hello The question you have posted is related to the Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support. http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home Thank you. Tags: Windows ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility We have a range of devices, computers HP desktop and laptops in our environment. Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted. So I am trying to set up a remote BIOS and Bitlocker config activate software that we can get out via SCCM and then embed in a task sequence image for new machines. I use the Bios HP Configuration utility to check a BIOS password is set and then activate the TPM chip. I took a BIOS config output of each of our models and created a settings file that has all of the TPM associated parameters of all models. At the moment I run Setup BIOS utility manually for testing. On all models I tried that works very well, except for the 600 ProDesk G1 SFF. When I run the utility on the ProDesk 600 G1 MFS, it says that I have managed to update the settings, and when I check the BIOS, the TPM secure has been unhidden and the TPM Management was given to the operating system (two settings I change), but the TPM itself remains hidden. It's the release of the BIOS configuration utility (it uses the 2.60.13.1 version, which uses plaintext passwords. I also tried with the 3.0.13.1 later version that uses password files - same result) And after a reboot (where it should activate the TPM), BIOS shows as disabled built-in safety device (see attachment for the image). I have tried everything I can think of to get this to activate, including: I also tried to add the utility and the commands for an SCCM package and it works directly and as part of a sequence of tasks to see if that makes a difference, but nothing I've done has activated the TPM module. I know that the TPM module works, as you can turn it on manually and then Bitlocker can be applied to the machine, but with thousands of devices in our environment, I need to get this job without the need for manual intervention. Has anyone else had this problem and found a solution? Or has someone at - he managed to activate the TPM on the SFF of 600 ProDesk G1 using the BIOS Setup utility? Any ideas / suggestions would be very appreciated! P.S. This thread was moved from the company PC - Compaq, Elite, Pro for HP PC Client management. -Hp moderator of the Forum This problem has now been resolved by HP. T400: Error Message - there was a problem connecting to the TPM secure Hello I am a new user of ThinkPad. I just got my T400 a week ago, and I'm a fan of him immediately. But there's this little thing that really bothers me. The second day I used my laptop, I got this error message: "There was a problem connecting to the module of TPM (safety device) on this computer", and I got this message since that date, every time I turn on my laptop. What it means? And how do I get rid of this error message? Thank you! Moderator Note: Type + error message added to the line object for clarity. go into the bios and check if the TPM secure is enabled or disabled in the BIOS. Make sure it's on. If the problem persists then call Lenovo, could be a hardware problem. SQL Server 2005 unattended install using the script fails on Windows 2003 Cluster We strive to perform the installation without SQL Server 2005 via the script assistance, but the installation fails on Windows 2003 Cluster, we use Windows 2008 with HyperV running a DC with two nodes (all Win 2003). Script is... Start/wait setup.exe/qb VS = INSTALLVS SQLTEST = SQL_Engine INSTANCENAME = SQL123 ADDLOCAL = SQL_Engine ADDNODE = sqlnode-1, sqlnode-2 GROUP = SQL1 IP = 192.168.1.85, SQLNetwork ADMINPASSWORD = Windows8! SAPWD = Windows8! INSTALLSQLDIR=%ProgramFiles%\Microsoft SQL Server\ INSTALLSQLDATADIR = G:\SQLDATADIR\ SQLACCOUNT = SQLPASSWORD lab\sql_svc = Windows8! AGTACCOUNT = lab\sql_svc = Windows8 AGTPASSWORD! SQLBROWSERACCOUNT = SQLBROWSERPASSWORD = Windows8 lab\sql_svc! SQLCLUSTERGROUP = "lab\sql_grp" AGTCLUSTERGROUP = "lab\sql_grp" FTSCLUSTERGROUP = "lab\sql_grp" ERRORREPORTING = 1 SQMREPORTING = 1 SQLCOLLATION = SQL_Latin1_General_CP1_CI_AS Errors on the nodes: SQLSetup0008_SQLNODE1_Core (Local) Running: InstallSqlAction to the: 4/14/2012 22:56:39 Installation: sql on target: SQLNODE1 Waiting for remote setup (s) to prepare Remote Setup (s) is ready Problem of determining the State of the virtual server for the package: '1' because of the exception of data store: Source the name of the file: datastore\cachedpropertycollection.cpp Compiler timestamp: Fri 29 Jul 01:13:49 2005 Function name: CachedPropertyCollection::findProperty The source line number: 63 ---------------------------------------------------------- Could not find the property 'VsDataPath' {'PackageIdStateScope', ' ', '1'} in the cache. Source the name of the file: datastore\packageidstatescopecollector.cpp Compiler timestamp: Wed Aug 24 13:40:04 2005 Function name: PackageIdStateScopeCollector::collectProperty The source line number: 115 ---------------------------------------------------------- dataPathValue is empty Cluster functionality detected: SQL_Engine Loaded DLL:C:\Program SQL Server\90\Setup Bootstrap\sqlsval.dll Version: 2005.90.1399.0 Source the name of the file: datastore\cachedpropertycollection.cpp Compiler timestamp: Fri 29 Jul 01:13:49 2005 Function name: CachedPropertyCollection::findProperty The source line number: 130 ---------------------------------------------------------- Unable to find property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} in the cache Source the name of the file: datastore\cachedpropertycollection.cpp Compiler timestamp: Fri 29 Jul 01:13:49 2005 Function name: VirtualServerInfo.IPResources The source line number: 113 ---------------------------------------------------------- Could not collect the property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} Transact package threw an exception. Error code: 0x8007000d (13) Windows error text: these data are incorrect. Source the name of the file: sqlchaining\highlyavailablepackage.cpp Compiler timestamp: Mon Aug 29 01:18:42 2005 Function name: sqls::HighlyAvailablePackage:manageVsResources The source line number: 490 ---- Context ----------------------------------------------- SQLs::HighlyAvailablePackage:preInstall SQLs::HighlyAvailablePackage:manageVsResources m_dataDirPath is empty Cluster API threw an exception during operations of virtualization. Package first notify: 13 Error code: 0x8007000d (13) Windows error text: these data are incorrect. Source the name of the file: sqlchaining\highlyavailablepackage.cpp Compiler timestamp: Mon Aug 29 01:18:42 2005 Function name: sqls::HighlyAvailablePackage:manageVsResources The source line number: 490 ---- Context ----------------------------------------------- SQLs::HighlyAvailablePackage:preInstall SQLs::HighlyAvailablePackage:manageVsResources m_dataDirPath is empty Cluster API threw an exception during operations of virtualization. SQLSetup0008_SQLNODE2_Core (Local) Local configuration can complement Running: InstallSqlAction at: 4/2012/14 23:23:57 Installation: sql on target: SQLNODE2 Informs the package is ready to start: 0
Waiting for notification start installation Local configuration can begin installation Error code: 0x8007000d (13) Windows error text: these data are incorrect. Source the name of the file: remotepackageengine\remotepackageinstallersynch.cpp Compiler timestamp: Wed Aug 24 13:40:17 2005 Function name: sqls::RemotePackageInstallerSynch:preInstall The source line number: 128 ---- Context ----------------------------------------------- SQLs::InstallPackageAction: perform SQLs::RemotePackageInstallerSynch:preInstall Abandonment of the package: "sql", due to an error from the configuration of the host: 13
Notify all ready to commit: 13 Notify all ready to put end to: 13 Waiting for notification complete installation Local configuration can complement Packaging return code: 13 Complete: InstallSqlAction at: 4/2012/14 23:23:59, returned false Error: The 'InstallSqlAction' Action failed during execution. Error during execution information: Target collection includes the local machine. ----------------------------------------------- Error: The 'UninstallForRS2000Action' Action failed during execution. Error during execution information: Action: "UninstallForRS2000Action" will be marked as failed due to the following condition: The condition 'rs has been correctly upgraded level.' returned false. Package installation: 'patchRS2000' failed due to a precondition. Running: ReportChainingResults at: 4/2012/14 23:24:1 Error: Action "ReportChainingResults" threw an exception during execution. One or more packages could not be installed. See logs for details of the error. : 13 Error code: 0x8007000d (13) Windows error text: these data are incorrect. Source the name of the file: sqlchaining\sqlchainingactions.cpp Compiler timestamp: 1 Thu Sep 22:23:05 2005 Name of the function: sqls::ReportChainingResults: perform The source line number: 3097 Please notify. Assani Hello The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question: http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923 Hope this information helps. Expand the C drive in Windows 2003 Sp2 Hello I need to expand a VM windows Server 2003 R2 C: drive using VMware vcenter convertor, fight, it doesn't did me not the possibility of increasing the C: drive. What is the alternative? or I've missed using the V2V? Thank you. kamran7446 wrote: Thanks for your reply. Yes, it's showing as unallocated, but because it's a system (C:\) drive I can't extend it by using Diskpart utility I can do for other readers. There are different ways to do this for Win 2003 (easy in 2008, has expanded in the GUI). For Windows 2003 you could close the virtual machine, get the VMDK on another Windows Server, use Diskpart or another tool to extend partition here - since it is not the system partition / boot. Then mount it in the original virtual machine. Official VMware training, they recommend a free tool from Dell, called extpart.exe. Simple tool command-line which allows to extend the system partition / boot when the virtual machine is running. Check it out and try if you wish. It is on the FTP of Dells site at ftp.dell.com/app, any logon not required. WDS gives error of the last stage on Windows 2003 R2 (64-bit) Hello We have planned for our DHCP server to use as the WDS for Installation on computers in bulk. The operating system is Windows 2003R2 Standard SP2 (64-Bit), WDS added in Add/Remove components successfully > then run Administrative Tools Windows Deployment Services Legacy Option form. In the last step of his Message watch unique Instance of regularization of storage (the Service has not been started) In the event generates the ID 7023: The regularization of single Instance Storage is completed with the following error: For more details, I enclose snapshot. Please help again. Hello The question you posted would be better suited in TechNet community that you are using Windows server 2003. Hello Anyone know if the Windows 2008 R2 with Windows 2003 forest functional level domain controllers will be always supported after Windows 2003 support ends in July 2015? Thank you This issue is beyond the scope of this site and must be placed on Technet or MSDN dident see enter the user page in windows 2003 Hello I have a Windows 2003 Server Orginal which work very well until today. But now, what my Page Progressbar enter Convert password on a Blank Page which Cener seen Windows Server 2003 Logo and Place enter username and password and other button Dident see. But I can with the Tab key access to these places and enter my User and Pass. But I don't see other things and I can't work my Windows 2003. In Safemode State in equality with Normall State. This state because I very strong and I never connect my server to Internet and USB key and all other things. Now how to solve my problem Hello Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question: The VMWare Tools on Windows 2003 Svr Setup error Hello I'm using VMWare Workstation 9.0.1 build-894247 under Win 7 x 64 and and try to install VMWare tools on a WIndows 2003 Svr Standard guest but keep getting the error "Error 1335 the cabinet file 'Toolbox.cab' required for this installation is damaged and cannot be used...". "The installation of Win 2003 SP2 and all updates from MS, I got this error several times. A screenshot is attached. Any suggestions? I have no problem with installation/update of the VMWare tools for other Windows guests that I recently installed. Thank you John Davis Verify that the checksum MD5 or SHA1 of the file windows.iso in the working directory of VMware Workstation is as indicated below. For version windows.iso of VMware Tools file 9.2.2.894247: These values have been generated, based on the extracted windows.iso file of Tools-windows - 9.2.2.exe.tar should be the same one included in the WS 9.0.1 installed. Note: The checksum SHA256 for the file windows-tools - 9.2.2.exe.tar has been verified against its value published prior to extraction. Cannot install the vCenter 5 on Windows 2003 Ent 64-bit Hello Anyone know what I can not install vCenter 5 Windows 2003 Ent 64 bit? I get: vCenter Server is not supported on this platform. Refer to the installation guide for the supported platforms list. Make sure that Windows is running not as a domain controller. I can confirm that is not running on a domain controller. Sen Option "Reconfigure" in vCenter 4.1 to enlarge the size of the partition system on WIndows 2003 I had just noticed this and I was wondering if I could use this option to expand the system (c) on a Windows 2003 Server partition. I know there are several ways to do this but, in the past, I was always a V2V, change the size of the C: volume during conversion and once checked... delete the original virtual machine. The "reconfigure" appears it can accomplish the same thing faster. Is this true? vmproteau wrote: I know for the VM helper method but use the V2V method because it offers a simple uninstall. Had not used the GRET, but I'm not like all the other suggestions, it works fine. I think that it is not well supported by Microsoft. Here's how a good to use a helper VM. Hower, be very careful that your VM is not no matter what instant assets. http://vmprofessional.com/index.php?content=2k3resize To my question, 'reconfigure' offers another option for extension of partition for the WIndows 2003 System. I'll try it in the lab, but I was wondering if someone has already done this successfully. No, it reconfigures option does not increase the volume in the guest operating system. Activate the oracle 10g on windows 2003 R2 X 64 edition to address the memory 8 GB What you actually do is since you're 10gr 2, you can use the spfile. Increase the SGA_MAX_SIZE SGA_TARGET (if you want to give control to the Oracle itself) in the spfile and bounce the database. 6G could be changed depending on what type of applications which allocates RAM for the operating system, you already have on your operating system. Hope that helps. Ogan How to set up primary Oracle & Eve on the same host on windows 2003 other general procedures LOCK_NAME_SPACE will be necessary. Unable to connect to the internet, the TPM secure All of a sudden from this afternoon, I get the message below: "There was a problem connecting to the module of TPM (safety device) on this computer. It is possible that the software anti-virus or firewall is blocking the connection. A missing or disabled device driver can also cause this problem. Please refer to the online documentation for more information. » I checked my antivirus, it does not block anything, I tried to check the firewall, but a message indicating that "cannot be dΘmarrer windows firewall/internet connection sharing. So, I reset winsock and the firewall, but still cannot open my firewall. I read somewhere to get into the BIOS and disable the "security chip", still, no luck! And now all that some how became very slow... Help, please! Thank you!!! I am running XP Pro (downgraded from Vista Pro) on X200s vijaysaradhi: Sorry, don't know what you mean, but thanks for the offer of help! It's really frustrating and desperate when nobody gives a presentation ^-^ in. thank you In any case, I think I solved the problem by not really knowing how. After everything I tried, I finally hit the botton vintage blue thinking about startup and used rescue and recovery. Now the internet is in place, and the firewall running, no more issues either. Hope this helps someone who has encountered the same problem. But note that I followed through everything first. I was checking the updates installed and came across this: Windows Vista cannot install cumulative security updates Error: 80200010 Give this triple McAfee fix, a tourbillon: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft No access to 250 GB external 3.5 "USB HDD PX1266E - 1 25 Hello I couldn't access my HHD, AVG antivirus found SwitchFK.exe tread.I tried to delete this file and SWITCHFK. INI located in the driver card.Unhappy due I have to without the permission of this file, I could not get rid off them. Virus scanners wo Try to free up space in my O.E., is go to add/remove and apparently removed something that was necessary in order to O.L.E. Would reset back a few days but cannot find the calendar to do. Any help is apreciated. chattycat Need to find code product key for a trial version of Microsoft Word 2010 I need to find the code of product key for Microsoft Word 2010 so I can travel with my homework in my online college class. This is a requirement for it, but I can't afford it right now. If I don't get this product key, I'm afraid I'm going to miss m Desktop HP Compaq Elite 8300: stolen PC Hello My PC HP Compaq Elite computer 8300 was stolen yesterday from my apartment!I checked the specifications of product, and he says there is an anti-theft Intel processor installed on my PC. I wonder if there is anything that I can track my PC! PS can wireless signal is strong, but I can't connect to internet Wireless has been lost, what it means, no legacy wireless is not availableSimilar Questions
C:\ > BiosConfigUtility64.exe /cspwd: "password" set: "TPM_Config.REPSET"
< BIOSCONFIG Version = "2.60.13.1" Computername = 'HP600G1' Date = "24/07/2014" Time = "13:01:37 ' UTC '1' = >"
< SETTING changeStatus = "pass" name = "Embedded Security Device" reason = "' returnCode '0' = >"
< OLDVALUE > <! [CDATA [hidden device]] > < / OLDVALUE >
< NEWVALUE > <! [CDATA [device]] > < / NEWVALUE >
< / SETTING >
< SETTING changeStatus = "pass" name = "Enable security on the next boot" reason = "' returnCode '0' = >"
< OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
< NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
< / SETTING >
< SETTING changeStatus = "pass" name = "The BONES of on-board safety management" reason = "' returnCode '0' = >"
< OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
< NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
< / SETTING >
< SUCCESS msg = "Successfully set BIOS config." / >
< information msg = 'BCU return the value' real '0' = translated = '0' / >
< / BIOSCONFIG >
C:\ >
They provided a replacement motherboard for the test machine I was using that solved this problem. I don't know what kind of motherboard failure could prevent the activation via the script TMP chip but not prevent activation through the BIOS menu, but as a replacement solved the problem, then it must be a hardware failure.
The service has not been started.
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
MD5 = 8d9a47fddf3988bb1fcb62bb21d3fa8f
SHA1 = 6a55b0d276a3442589d6a4892fa8759e8ca42712
If you are running Windows 2003, it should be possible that your machine does not meet the req min for vCenter5 and could be less than 3 GB of vRAM and 2 vCPU as what Andre said.
Best regards
Murat CAKIR
alter system set SGA_MAX_SIZE = 6G scope=spfile;
alter system set SGA_TARGET = 6G scope=spfile;
shutdown immediate;
startup;
show parameter sga;
Please could someone give the steps to configure oracle 10g primary and standby database on the same host with windows server 2003.
Thanks in advance...
See you soon.
Anil
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams096.htm#REFRN10083]Maybe you are looking for