[Security problem?] RV0xx vlan &; VPN
Hello
I have a problem with the latest RV042 firmware (I'm not for previous as this is my first).
I have a lan interface that is connected to a network of offices (192.168.2.0/24).
On the wan interface (only 1 is used), I have the internet connection.
Office network is connected to another site (192.168.1.0/24) using site to site vpn. So through the interface web, LAN (192.168.2.0/24) is authorized to communicate with (192.168.1.0/24) and also the other way around.
Everything all right at this stage.
I have to configure a vlan comments. So I assigned a vlan unused to an unused port lan. I added a "multiple" for this new subnet VLANs. (192.168.4.0/24)
When I set up a computer with ip static/dhcp (192.168.4.1, for example), I can't access local office lan and I can connect to the internet (which is OK).
The problem is when one set of comments is 192.168.2.x ip. The RV0xx is 'listening' with ip 192.168.2.1 and then send the package in the vpn tunnel if the destination is 192.168.1.x.
So is there a way to stop this flow, because I don't want you will have access to the network through VPN? As you can understand, this issue is not limited to comments, but rather of vlan with VPN. What I am doing wrong?
Someone has the same problem?
Thank you
Jerome
PS: If there is a bug, can it be resolved in the next firmware soon.
To prevent a client from changing its IP address assigned, you would need an additional switch to enforce security.
Tags: Cisco Support
Similar Questions
-
OfficeJet Pro 8610: Get the Permission of HPeprint or security problem error
I used printing wireless for several months successfully to print from my work computer, but am now able to print to the e-mail address provided.
The error reads 'your message was not delivered because of a permission or a security problem. It may have been rejected by a moderatory, the address can only accept email from certain senders, or another restriction to prevent any delivery.
The Organization rejected your message: hpeprint.com. »
I've reconfigured my printer to my router. Any suggestions?
Hey @LoreeW,
Welcome to the Forum from HP Support. I hope you enjoy your experience here.
I understand that you have a few problems with ePrint using your HP Officejet Pro 8610 e-all-in-one printer. I want to help you with this.
I recommend that you first check your printer to verify its intact ePrint connection:
- Touch the icon (webservices)
- If you see an address @hpeprint.com, I recommend that you try to send a test ePrint from a different email domain than what you use on your work computer. If it prints correctly, we can rule out your printer as being a factor in this particular issue. If your printer's Web services is enabled is more, re - enable. Any problem would occur with this, click here to access another relevant post I created. Scroll to my suggestion re: setting a manual DNS as this tends to help by allowing the webservices where fail the normal steps.
If you were able to send your printer work ePrint of any e-mail domain other than the one you use at work, read on. Click here to see an HP ePrint article that focuses on the various factors that can contribute jobs ePrint not printing not. Note that some areas of corporate email may become incompatible with ePrint due to the presence of a digital signature in the outgoing message template. EPrint jobs you send work meet these criteria?
Please let me know the result of your troubleshooting by responding to this post. Thanks again for reaching out in the Forums - we are always happy to help you. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below.
Have a great day!
-
Security problem with hidden extensions checked.
I said I should uncheck "Hide extensions of the file types that you want to know" in Windows 7, because I could inadvertently download a document with a double extension like 'Memo.txt.vbs. If the extension is hidden, then it would appear like 'Memo.txt. It would be a security problem. Is this true?
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
The first few times we call I refused to listen to because it sounded wrong, but this time I heard him out and that's what they said. First, he was of the India, I think his accent and he said he was calling to inform me about a security problem with my PC, it is said to "Best Windows Help" and that my network was showing at its end with a red light indicating a problem. He had opened the Run command and type of command bar to display the observer of events and go to the newspapers of Win and click Applications, then he wanted me to scroll the Application events and see how many errors was there. Between 20 and 50 I said, he said oh yes you have a problem and that he could fix in a few minutes, then it puts me in a collaborator of his that says display the control bar run then type "Iexplore www.support.me" which led me to a "Logmein Rescue page to https://secure.logmeinrescue.com/Customer/Code.aspx. At this point, that he asked me to give him full access to my PC in which I said, "you're crazy, no way" and he said OK then your PC will freeze and crash and I said a few words very friendly back and hung up. They seem to call every month or two and it looks like the same guy. Is it a Con? Who is this company "best Windows Help and how are they finding me? They say the information they hold comes from Microsoft. My caller ID lists like V052409070106, phone # (202) 011 - 3341. What is everything. Also, my PC is not crash or freeze because I installed it 2 years ago. I am running Win 7 Pro with Microsoft Security Essentials and windows Firewall behind a Cisco router.
Scam. They said that my computer was downloading malicious code and therefore transmit signals the error on their server.
They have a Web site, as afar as I can tell. I asked the guy at the phone for his site. He couldn't give me a Web site URL or couldn't pronounce correctly. He was frustrated and hung up. Scam.
-
Problem with Tunnel VPN L2L between 2 ASA´s
Hi guys,.
I have some problems with my VPN Site to site tunnel between 2 ASA (5520/5505).
I watched a lot of videos on youtube, but I can't find out why the tunnel does not...
Both devices can ping eachothers WAN IP address (outside interfaces), but I don't see any traffic between the 2 sites. It seems that the tunnel is not open to everyone. When i PING from the local to the Remote LAN (which should be an interesting traffic for the tunnel...), the its IKEv1 remains empty...
Am I missing something? I can't understand it more why same phase 1 is not engaged.
You NAT won't. In your config file traffic is NATted initially and then does not match any more crypto ACL. You must move the rule dynamic NAT/PAT until the end of the table on two ASAs NAT:
no nat (INSIDE,OUTSIDE) source dynamic any interface nat (INSIDE,OUTSIDE) after-auto source dynamic any interface
-
Security problems. Adobe connects vires of intellectual property. and if so recognize who visited my recordings. Thank you
Connect does not collect IP addresses. Records can follow who saw them if viewers are journaled in Connect.
-
File restrictions not met does not, major security problem with Reader shared.
Summary: it is possible to transfer files freely between host and virtual machines, but are not limited to declared Shared Folders.
I'm under VMWare Player 6.0.3 + tools under Win7/32, generally without problems. However, I just found out what seems to be a major security problem; It may have been there for years, I never checked. On a CentOS Linux VM and a Windows XP VM, I put folders always active; two folders are shared, C:\Users\ < name > \Desktop\VMWare (a subdirectory on the desktop) and R:\ (a RAM drive). "Card as a drive in Windows network, you can" is checked in the virtual Windows machine. There is no option for a folder always be not shared, the other only until the next poweroff (re point 2 below). I did some tests and was able to easily drag and drop files from the two virtual machines (running at once) to the host WITHOUT RESTRICTION FOR THE SHARED FOLDERS; I copied the files of the computer desktop virtual on the desktop of the host (not the directory said 'VMWare'), the office of the host on the desktop of the virtual computer and directory host random (C:\TMP) on the virtual machine, and then again to the desktop of the host.
1. serious, important question: the VM seems to have free run of the host, not only in the shared directories.
2. point minor: indicates the VMX (all below dossier_partage) file < sharedFolder0.expiration = "session" > but < sharedFolder1.expiration = "never" >; should not be the same thing, 'never' as records of actions are always enabled?
I have shared folders only through settings, no direct VMX edition. The VMX has:
sharedFolder.maxNum = '2 '.
sharedFolder0.present = 'TRUE '.
sharedFolder0.enabled = 'TRUE '.
sharedFolder0.readAccess = 'TRUE '.
sharedFolder0.writeAccess = 'TRUE '.
sharedFolder0.hostPath = "C:\Users\ < name > \Desktop\VMWare.
sharedFolder0.guestName = ' transfer to '.
sharedFolder0.expiration = "session".
sharedFolder1.present = 'TRUE '.
sharedFolder1.enabled = 'TRUE '.
sharedFolder1.readAccess = 'TRUE '.
sharedFolder1.writeAccess = 'TRUE '.
sharedFolder1.hostPath = "R:\". »
sharedFolder1.guestName = "RamDrive.
sharedFolder1.expiration = "never".
That concerns me; I sometimes deliberately tried to expose virtual machines to viruses, in the hope that there is a Chinese wall between the host and the VM, except for shared directories.
I am dong something wrong, is this expected behavior or is it an error in VMWare Player?
Best wishes
Looks like you're confused shared with drag-and-drop folders. With shared folders, the host files are mapped in the comments (possibly as a Windows network drive). Navigate in the comments under \\vmware-host. Drag-and-drop is a completely independent feature. There is no restriction on access to the drag-and-drop. To disable drag-and - drop in VMware Player, power off the virtual computer and add the following to your virtual machine configuration file:
insulation. Tools.Copy.Disable = 'TRUE '.
insulation. Tools.dnd.Disable = 'TRUE '.
insulation. Tools.Paste.Disable = 'TRUE '.
-
If (!.) IsDocOpened (docConst.HelpFile)) { Try { oDoc = openDataObject (docConst.HelpFile); var szFilePath = oDoc.path; } catch (e) { ShowError (e.message + "\c path was \'" + szFilePath + "\" ", 0"); } try {} oDoc = app.openDoc ({cPath: szFilePath}) ({acachees: false}); Security this access problem
} catch (e) {} App.Alert (' error in app.openDoc: "+ e.message); } } I am gettting a security problem when you try to open an attachment. What I forget?
Perhaps, this must be a function of trust at the level of the folders?
As a professional, there is an option for document level scripts. With the standard, you must use the JavaScript console to add the script.
Did you look at example 2 for disclosed? It can be run from the JS console.
-
Hello
I discovered when I'm in Internet Explorer and go to the page "artists."
and I click on a name, for example: "Abel team ELA / I ai Gomes
I get this warning:
MuseJSAssert: Error calling the function switch: error: a security problem has occurred.
It is only in IE, not when I use Safari or Chrome
Any ideas how to solve this problem?
There is an invalid hyperlink on the Abel Equipe ELA / I've got Gomes page on a piece of text which reads "with"your entry. You must find this text in the Muse, delete the hyperlink and enter a valid.
-
Security problems of Windows 7 connecting to the VPN to a ras server
We run a domain for most of our users - but not all - due to the merger of companies
We use vpn connections from Windows at the standard address to access remotely via a no domain Server 2003 running RSA
Windows name nigel.hunter@domain-name
VPN username nhunter
When runnin Windows xp users can get access to the files on the servers
When you run Windows 7, they can
have found that the system windows 7 are passing the VPN user name and credentials instead of the credentials of domain
This does not prevent access
Anyone know how I can get to pass the credentials of the doamin during access to the VPN servers
Thanks in advanced for any help
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Hope this information helps.
-
Problem with ping VPN cisco 877
Hi all!
I have a working VPN between a fortigate and a Cisco.
I have a problem with ping network behind the cisco of the network behind the forti.
When I ping to vlan2 cisco without problem (192.168.252.1) interface, but I can't ping a server in the vlan2 (192.168.252.2) behind the cisco.
However the Cisco I can ping the server. In the forti, I see that ping to the interface vlan2 and server in vlan2 take in the same way, and I can see package.
I post my config could see it it as blocking the ping from 10.41.2.36 to 192.168.252.2 while 192.168.252.1 ping is OK?
IPSEC #show run
Building configuration...Current configuration: 3302 bytes
!
! Last modification of the configuration at 14:42:17 CEDT Friday, June 25, 2010
! NVRAM config update at 14:42:23 CEDT Friday, June 25, 2010
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime localtime show-time zone
encryption password service
!
IPSEC host name
!
boot-start-marker
boot-end-marker
!
logging buffered 1000000
enable secret 5 abdellah
!
No aaa new-model
clock timezone GMT 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
!
!
dot11 syslog
IP cef
No dhcp use connected vrf ip
DHCP excluded-address IP 192.168.254.0 192.168.254.99
DHCP excluded-address IP 192.168.254.128 192.168.254.255
!
IP dhcp DHCP pool
network 192.168.254.0 255.255.255.0
router by default - 192.168.254.254
Server DNS A.A.A.A B.B.B.B
!
!
no ip domain search
name of the IP-server A.A.A.A
name of the IP-server B.B.B.B
!
!
!
!
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 5
ISAKMP crypto key ciscokey address IP_forti
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac vpntest
!
myvpn 10 ipsec-isakmp crypto map
defined by peer IP_forti
Set transform-set vpntest
match address 101
!
Archives
The config log
hidekeys
!
!
!
!
!
interface Tunnel0
IP 2.2.2.1 255.255.255.252
source of Dialer0 tunnel
destination of IP_forti tunnel
myvpn card crypto
!
ATM0 interface
bandwidth 320
no ip address
load-interval 30
No atm ilmi-keepalive
DSL-automatic operation mode
!
point-to-point interface ATM0.1
MTU 1492
bandwidth 160
PVC 8/35
VBR - nrt 160 160
PPPoE-client dial-pool-number 1
!
!
interface FastEthernet0
switchport access vlan 2
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
switchport access vlan 2
!
interface Vlan1
IP 192.168.20.253 255.255.255.0
IP nat inside
no ip virtual-reassembly
!
interface Vlan2
IP 192.168.252.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface Dialer0
bandwidth 128
the negotiated IP address
NAT outside IP
no ip virtual-reassembly
encapsulation ppp
load-interval 30
Dialer pool 1
Dialer-Group 1
KeepAlive 1 2
Authentication callin PPP chap Protocol
PPP chap hostname [email protected] / * /
PPP chap password 7 abdelkrim
myvpn card crypto
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 Dialer0
IP route 10.41.2.32 Tunnel0 255.255.255.240
!
no ip address of the http server
no ip http secure server
The dns server IP
translation of nat IP tcp-timeout 5400
no ip nat service sip 5060 udp port
overload of IP nat inside source list NAT interface Dialer0
!
IP access-list standard BROADCAST
permit of 0.0.0.0
deny all
!
NAT extended IP access list
IP enable any host IP_cisco
deny ip 192.168.252.0 0.0.0.255 10.41.2.32 0.0.0.31
!
access-list 101 permit ip 192.168.252.0 0.0.0.255 10.41.2.32 0.0.0.31
public RO SNMP-server community
3 RW 99 SNMP-server community
SNMP-server community a RO
SNMP-Server RO community oneCommunityRead
not run cdp
!
!
!
control plan
!
!
Line con 0
password 7 abdelkrim
opening of session
no activation of the modem
line to 0
line vty 0 4
password 7 aaaaa
opening of session
escape character 5
!
max-task-time 5000 Planner
NTP-period clock 17175037
Server NTP B.B.B.B
Server NTP A.A.A.Aend
Alex,
It's your GRE tunnel:
interface Tunnel0
IP 2.2.2.1 255.255.255.252
source of Dialer0 tunnel
destination of IP_forti tunnel
myvpn card cryptoYou also have routing set by it.
You don't need a GRE tunnel, nor do you need the road to tunnel if you want just IPsec tunnel.
-
Problem with the VPN site to site for the two cisco asa 5505
Starting with cisco asa. I wanted to do a vpn site-to site of cisco. I need help. I can't ping from site A to site B and vice versa.
Cisco Config asa1
interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 172.xxx.xx.4 255.255.240.0
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.60.2 255.255.255.0
!
passive FTP mode
network of the Lan_Outside object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
Access extensive list ip 192.168.60.0 Outside_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_2 of object-group a
network of the Lan_Outside object
NAT (inside, outside) interface dynamic dns
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 172.110.xx.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.60.0 255.255.255.0 inside
http 96.xx.xx.222 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 96.88.75.222
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
inside access managementdhcpd address 192.168.60.50 - 192.168.60.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_96.xx.xx.222 group strategy
attributes of Group Policy GroupPolicy_96.xx.xx.222
VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 96.xx.xx.222 type ipsec-l2l
tunnel-group 96.xx.xx.222 General-attributes
Group - default policy - GroupPolicy_96.xx.xx.222
96.XX.XX.222 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cisco ASA 2 config
interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 96.xx.xx.222 255.255.255.248
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.1.254 255.255.255.0
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the Lan_Outside object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_4
ip protocol object
icmp protocol object
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_2 of object-group 192.168.1.0 255.255.255.0 192.168.60.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_4 of object-group a
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.60.0_24 NETWORK_OBJ_192.168.60.0_24 non-proxy-arp-search of route static destination
!
network of the Lan_Outside object
dynamic NAT (all, outside) interface
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 96.xx.xx.217 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 172.xxx.xx.4 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 172.110.74.4
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0dhcpd address 192.168.1.50 - 192.168.1.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_172.xxx.xx.4 group strategy
attributes of Group Policy GroupPolicy_172.xxx.xx.4
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 172.xxx.xx.4 type ipsec-l2l
tunnel-group 172.xxx.xx.4 General-attributes
Group - default policy - GroupPolicy_172.xxx.xx.4
172.xxx.XX.4 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
inspect the httpFor IKEv2 configuration: (example config, you can change to encryption, group,...)
-You must add the declaration of exemption nat (see previous answer).
-set your encryption domain ACLs:
access-list-TRAFFIC IPSEC allowed extended LOCAL REMOTE - LAN LAN ip
-Set the Phase 1:
Crypto ikev2 allow outside
IKEv2 crypto policy 10
3des encryption
the sha md5 integrity
Group 5
FRP sha
second life 86400-Set the Phase 2:
Crypto ipsec ikev2 ipsec IKEV2-PROPOSAL
Esp aes encryption protocol
Esp integrity sha-1 protocol-set the Group of tunnel
tunnel-group REMOTE-PUBLIC-IP type ipsec-l2l
REMOTE-PUBLIC-IP tunnel-group ipsec-attributes
IKEv2 authentication remote pre-shared-key cisco123
IKEv2 authentication local pre-shared-key cisco123-Define the encryption card
address for correspondence CRYPTOMAP 10 - TRAFFIC IPSEC crypto map
card crypto CRYPTOMAP 10 peer set REMOTE-PUBLIC-IP
card crypto CRYPTOMAP 10 set ipsec ikev2-IKEV2-PROPOSAL
CRYPTOMAP interface card crypto outside
crypto isakmp identity addressOn your config, you have all these commands but on your VPN config, you mix ikev1 and ikev2. You have also defined political different ikev2. Just do a bit of cleaning and reached agreement on a 1 strategy for the two site (encryption, hash,...)
Thank you
-
switchport port-security problem
Hi all
I wanted to test using the switchport port-security with mac address fixed for voip and sticky for the vlan access.
to do this, I created the following configuration:switchport port-security maximum 2
switchport port-security
aging of the switchport port security 5
switchport port-security-address mac sticky
voice of vlan switchport port-security-address mac e8ba.7006.59a4the problem is the mac address that switch learns to access vlan, never goes away even if the device is no longer connected.
switchport port-security maximum 2
switchport port-security
aging of the switchport port security 5
switchport port-security-address mac sticky
switchport port-security-address mac c434.6b24.5db9 sticky vlan access
voice of vlan switchport port-security-address mac e8ba.7006.59a4Can you help me?
This should make them disappear without having to use any statement when the switchport learns a new mac again if his manual, you have to bounce the port as well
Disable them sticky interface port-security
-
All,
The situation is that I'm trying to initiates a connection outside a Firewall ASA, to a destination IP address that is on the remote end of a VPN tunnel looked SAA even on the external interface. So logically slow traffic is outside to outside.
The SAA is to deny the traffic that the conversation shows the source as the destination and the outside outside.
Is there something smart, that I can do on the SAA to solve this problem?
Thank you
D
Hello
Use the following command on the ASA:
permit same-security-traffic intra-interface
Kind regards
Aditya
Please evaluate the useful messages and mark the correct answers.
-
Possible to assign security levels in the VPN tunnel?
Currently I have a PIX-2-ASA VPN tunnel works without any problem.
Here's my problem, I want to know if there is a way to configure one side of the tunnel as an interface "drop safety" of sorts. I want only one side to be able to open traffic.
ACLs are not useful on one side at least as return traffic generated on the random ports. I want only one side to answer Insider sessions, but not be able to start a session on its own.
Since the terminiates of VPN tunnel on the external interface, the security level of each side is '0 '. If all traffic behind on part and on the other the tunnel can innitate sessions.
Any ideas?
Thank you
Edit: One side is a v6.3 (5) of PIX515E, another ASA5510 v7.2 (1)
Hello
On your ASA, you can specify the following 3 connection types in your crypto card:
1 crypto map set type of connection are created only
2 crypto map set connection type response only
3 crypto map set-type of two-way connection
This should allow you to control what end can initiate the tunnel.
Concerning
Pradeep
Maybe you are looking for
-
Search address bar still search via the engine chosen in the search bar
I think it started right after the installation of Firefox 23.0.1, before which a search in the address bar would always search Google. Basically enter a string in the address bar will do the same thing as the search bar. If the search bar is defined
-
Satellite A300 - does not connect to the secure network to WPA
Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver 7.6.0.200) wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks? I can connect
-
Hello I've had my Toshiba for over 3 years and today when I tried to turn it on it came with a black screen that appears when the laptop has been incorrectly stopped. It gives two options; to open windows as usual or an audit recommended before start
-
Wizard Boot Camp can not be used. The Mac doesn't support Boot Camp.
"Cannot use boot Camp Assistant. The Mac does not support Boot Camp. "What's the problem?
-
HP pavilion 15-n001: all 3 USB ports not working not
my new hp Pavilion 15-n001, suddenly all 3 USB ports do not work. Help me solve this problem