security provider Internet says my network under the attack of my 5520photosmart printer
can anyone help? I just got a new HP's Photosmart 5520 I use wireless. whenever I try and print my provider bullguard security shows my network is attacked and will not let me print. What should I do?
Call Bullgaurd and ask them because I really doubt that your printer is to attack you.
Tags: HP Printers
Similar Questions
-
I use the HP LaserJet 5100 printer.
I want to send the .ps file to the network through the on-board system postscript printer (the ARM Cortex microcontroller is used and the TCP/IP stack is worn).
I am able to send the file .ps for postscript using the windows system network printer and the file goes to the printer.
When the .ps file is sent to the printer by using the command line: copy test.ps\\printer_server\printer_port, is the driver is come into picture.
Please help me.
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
-
Setting up Airport Express to provide internet to existing network
Hello
I want to install the following configuration:
Router (ISP) < connection cable > Airport Express < Wifi > router primary < cable connection > Network Attached Storage / TV / Playstation
Is it possible to provide the internet connection to the main router via the express from the airport, that is connected to the Wan? Or the Airport express to be the main router, to use the WAN connection, it connected?
Hope you find what I want to do ;-)
Concerning
Michael
This configuration will not work... unless the main router is a sort of apple airport. Is it?
It is a very poor installation, even if you have as a main router apple airport... It's much better to the cable. I'm guessing that's not possible... If not then you another possible way around the problem is adapters EOP (ethernet over power).
They do not go to work in all situations depending on the power of its wiring in the House... but are better than wireless links when they do.
You show a (ISP) router to the starting point... what router is it? If that works as a router... None of the other devices must be configured as router... have a primary router means that you have no router in front of her.
Give us details and we can help you further.
-
Internet Explorer 8, bar under the menu bar, how can I make them disappear?
I have no use for this bar, and it takes half an inch of vertical real estate on my screen. How can I make it disappear?
See also:
Show bar Favorites Internet Explorer 8 cascading menu for more screen space
Ramesh Srinivasan . The Winhelponline Blog
Microsoft MVP, Windows desktop experience -
Internet Explorer is blocked under the program?
I can't use internet explore to access the web. it blocks a program on my computer. I have already tried to disable the firewall and windows defender and all antivirus software and I am still unable to move anything that blocks the program, please help!
Hi Lo442,
Thanks for posting your question on the Forums of Windows Vista.
If you receive the message indicating that a program error blocks Internet Explorer to access the web, I will recommend you to try to set up the machine in a clean boot state, and check which application is causing the problem.
You can follow the given article:
http://support.Microsoft.com/kb/331796
Hope the information will help. Please post back and we do know.
Thank you & best regards
Ashish Gupta
Microsoft Answers Support Engineer -
I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop
Hi MelissaBoltik,
· What is the exact error message?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start and then click Run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article to reset the TCP/IP settings.
How to reset the Protocol Internet (TCP/IP)
-
Error message below Re: I got the cumulative update for IE 9-64 - bit to fail repeatedly. The error code is listed below.How much of a problem is the following and, if serious, how can I get the system to install this update? I'm running Vista 64 bit and it is patched to date - with the exception of this one.
Update cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465) installation failed
Error details: Code C 8007371Help and Support: http://support.microsoft.comHello
Thank you for reaching out to the Microsoft Community.
According to the description, it seems that you have found a 8007371 C error code while trying to install update Cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465).
I understand the inconvenience you encountered. I will certainly help you with this issue.
I suggest you to refer to the advice given by Karena R on June 10, 2010 and check if it helps.
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
For more information, visit the following link and check.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.
-
I get an error that says unidentified network.
Hello
I'm running a very minor problem with my internet today. When I move my mouse over my wifi, it says 'Unidentified network' under my real wifi.
I still have the wifi, but I am little concerned. I'm not on a virtual private network.Thank you
-ChanHello
Thanks for the reply with the status.
I suggest you remove all wireless connections and re - configure Setup again.
http://Windows.Microsoft.com/en-in/Windows-8/WiFi-networking
http://Windows.Microsoft.com/en-in/Windows-8/connect-Internet
Hope this information helps.
-
WindowsUpdate_80073712""WindowsUpdate_dt000"will not install this critical update...
Hello
Thanks for posting in the Microsoft Community forums!
I understand that you are facing problem in installing Windows update. To fix the Windows update problem, try suggestions:You did changes to the computer before the show?
Method 1:
You can try the steps in the link and check if it helps:
Windows Update error 80073712http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712
Method 2:
Try to manually download the update from the link:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=36593Method 3:
If the steps above don't you then try the steps in knowledge base article:
Error code 0 x 80073712 when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/957310Note: before performing an upgrade on the spot, you can perform the clean boot.
Disabling Anti Virus software.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Also save the data as a precautionary measure and disconnect external devicesAnswer to us if you have problems with Windows Update or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
-
Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.
Original title: launch of the problems of checkers:
Hello
If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.
Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software
Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off
IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
-
Migration in WebLogic security provider
Hello
I want to migrate the dev security provider to test and I experience the following behaviors: new users and their groups are inserted correctly, but existing users and their group memberships are not being updated or crushed. Is this expected behavior? Do I need to set some parameters when I import or export security provider in the Console of Administration WebLogic?
Thank you!Kind regards
StijnStijn of morning,
WLS integrated LDAP migration mechanisms are not really made for a properly structured deployment process. I assume that this is due in part to the fact that Oracle is not really a lawyer allows you to use the Protocol LDAP WLS is the main tool of management of authentication and permissions in a productive environment, but rather by an appropriate OID, MSAD or another LDAP. All that you are migrating 'normally' are the configurations of LDAP and group/AppRole rather than physically importing assignments users.
Certainly, that 'normally' comes with large enough citations because you may need to use LDAP WLS because there is nothing else. But I would say your solution is one of the valid solutions to deal with this problem, and as you can script these steps, it should not be too difficult to use.
See you soon!
-
"User intervention required" network OfficeJet 6500 E709a on Windows 8 print
I have an OfficeJet 6500 all-in-in-one E709a connected to my router wireless via an ethernet cable. 2 computers (Win XP and Windows 8 64 bit) connected wireless to this network. The Win XP computer can print without problem, but the Win 8 computer print jobs in queue and says "User interaction" required
A few notes:
* It seems that Windows already installed drivers for this printer. It is available in the window "Devices and printers", having the status of "user Intervention."
* I don't want to install the complete software if I can avoid it
* I checked that the printer is NOT in offline mode / pause
* I tried stop the spooler service, delete the temporary files, and then restarting the spooler, as suggested, on a MS windows forum
* Windows 8 is a new computer; It has never worked before
* I tried to restart the printer, but that did not help. Windows detects when it it turned off and rebooted, but when it is restarted it goes straight to mode "user Intervention."
* The software HP to select the "good" pilot says that it cannot find the drivers for my printer
* HP does not seem to offer a download drivers only for my combination printer/Win 8
Help, please.
Thank you
Skinny, looks to have a configuration issue with the printer. What we will do is to uninstall the printer completely and reinstall following in my footsteps. This will give use a shift even to work from.
First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer. -
Had a big storm - got the new modem. but they said that my drivers where missing or damaged. Downloaded Marvell Yukon of gateway - to the GT5432 model. Always says cable unplugged network. However, Bishop says peripheral device works correctly. Don't save: no update-unable to connect to the internet. I uninstalled and reinstalled; rebboted, etc. - still nothing. It has a problem with the PCI connection - no driver, but I don't see anywhere to down load or know what to download. Oh and another adapter on - think 1394 - when I turn that on and off the wonder; It shows the signal for the 1394---400 and does not say his unplugged, but still can not connect to internet.
The "old" computer to try to find information; noticed that said, unplugged network cable but it allowed me to connect to the internet. When I disabled the 'extra' adapter message there went, speed signal only at 100 than at the 'old' calculation is not any other PCI devices connection listed.I'm not sure of what continues.
The 1st computer was working fine - then picked it up to move it to where it belonged to my office and that's when he went out-made no sense to me!
Because you seem comfortable opening your computer, have you tried re - a corner of the map (with power off, remove the card and reinsert it into the slot, be sure to exercise static precautions if you are in an environment of low-hu7midity). If there is an empty slot, you can also move the map Marvell to another location. See the comments below.
It's a long shot, because even if you did not provide the complete ipconfig output, the data that you have provided appeared to be normal, but...
Open network connections (start > run > ncpa.cpl > OK)
Right-click on the icon for your network adapter, and then select Properties
You should see a screen like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Local_Area_Connection/Properties/General/Index.shtml
Issues related to the:
In the upper area, under 'Connect using' said 'Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller? If this is not the case, what does say?In the second box, what are the items are listed under "this connection uses the following items"?
The only other thing I can think is that the Marvell Ethernet card was damaged in the same storm that got your original modem/router.
*******************************************
According to Gateway, the GT5432 has 4 card slots:
A PCI Express x 16 (GUI)
A PCI Express x 1
Two PCI ConventionalYour motherboard should look like this:
Orange, top, connector is the PCI Express x 16. You probably have a video card in this slot.
The short white connector is the PCI Express x 1 connector.
Two more long white connectors are the standard PCI slots.
If I understand your installation, you should have the Marvell Yukon map into the slots of two down and your Agere modem on the other. As long as you have the SMC1244TX PCI card, why don't just remove you the Agere modem or the card Marvell and insert the card CMS in one of the two PCI slots? You are not using the modem and the working hypothesis is that the Marvell card does not work, so there is not much to gain by leaving a card in your computer.
Download the user guide and drivers for the SMC here--> http://www.smc.com/index.cfm?event=viewProduct&localeCode=EN_TUR&cid=9&scid=51&pid=238 map
Moreover, assuming that your open slot is the short PCI Express x 1 slot, you can buy another Ethernet card that will work in this niche: see--> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100010064%20600016290&IsNodeId=1&bop=And&Order=PRICE&PageSize=100
If I were you, I blow up the cheaper models and get the Intel EXPI9301CT $ 36 10 / 100 / 1000 Mbps PCI Express Desktop Adapter Gigabit CT. Note that this is the same card with a similar name (with close to 400 customers) which sells for $29,94. The price difference is because the cheaper "BLK" letters in the description, which means that it is "sold in bulk" and has no drivers, user guide CD or anything else in the box. There are several negative comments from people who do not understand this difference and then had trouble finding the driver for the card on the Internet.
-
I have problems to connect to any wireless internet - home, library, coffee shops. He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.
Only connects to the network saying "local only". And I'm lucky even get that much. Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).
I use a HP G60 laptop (maybe?), I don't remember the model exactly. Windows Vista. I am frustrated beyond belief. I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".
In summary: is it a hardware or a software problem? It seems to be a software problem that can have an impact on the material. Nevertheless, what can I do to fix this? Y at - it a software update, I need to try for my wireless card?
This computer is not yet a year old, and already I am unable to use it for the internet. Not very well I plug my ethernet cable router wireless in the library. I bought a laptop for a reason, but it is on track to achieve more like a desktop. Very disappointing.
Someone, please help!
I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".
Is this a hardware or a software problem? It seems to be a software problem that can have an impact on the material. Nevertheless, what can I do to fix this? Y at - it a software update, I need to try for my wireless card?
Hello
When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...
First step, log on to the HP support and download the latest drivers for your wireless card.
The HPG60 is a very good phone but its wireless card has problems with old drivers.
In which case it's a hardware problem, contact HP support.
In general, you can use this process to find out what's wrong with the wireless.
Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.
Check the Device Manager for the wireless card valid entry.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.
Make sure you firewall No. preventing / blocks wireless components to join the network.
Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.
When the work turns on the Wireless security.
Note * people sometimes make mistakes in writing and retype the password for security.
Another way is to copy in the menu of the router and then paste it when asked of the wireless card.
--------------------------------------------------
I really checked and configured every thing and it doesn't work.
Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .Jack-MVP Windows Networking. WWW.EZLAN.NET
-
I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
and I also try to fix or diagnose, but its still not not workin...
Please help idk what 2 do more...Hello
Good luck, you need technical support for a real computer store or system manufacturer is supported.
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon. You can download these on another
computer if you need to and transfer on removable media.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
How downgrade to ios to 9.1.2
I have downgrade my iOS to 9.1.2. Please guide me the procedure
-
Unable to limit tracking Announces iPhone 6 s more. Switch dimmed.
Unable to limit advertising
-
Defining the different top and bottom margins in each section of 5 Pages
I was able to define different left/right margins in the various sections of a document of 5 Pages, but when I put a new top or bottom margin, it changes all the sections in the whole of the document. Can anyone describe how to get up and down differ
-
WHAT HAPPENED TO MY CALCULATORICON THAT APPEAR AT THE TOP ON THE TOOLBAR
HE CAN'T FIND ANYWHERE
-
BLACKBERRY 8900 blackBerry smartphones... sending e-mails
It's probably a very simple explanation here... Sorry if I'm stupid. Just upgraded with ORANGE and am really pleased with my 8900... My first Blackberry ever. I want to send an E mail... I'm going to "compose E-mail" and put a name... prefils with a