See Agent running Linux?

Similar Questions

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.

• HP 17-g121wm: goes black screen, but the computer still running (Linux)

  I use HP 17-g121wm laptop. The screen turns off at random 2-5 minutes after the start, sometimes earlier. The computer will still run, but the screen will be black (the backlight seems to stay lit, however). Any buttons I press on, nothing makes the screen back on, so I have to press the power button to turn off the laptop and back on.
  
  This problem does not occur when I start in Windows, but when I boot in Linux (I tried Ubuntu and Arch linux), the problem persists.

  I tried to boot with the kernel parameter 'nomodeset' grub, but when I do that I can't enter a graphical environment, because the amdgpu driver is based on Kernel Mode Set (KMS) without nomodeset.
  
  I prefer to use Linux on this laptop for programming and development, preferably of Arch Linux. So, any help would be greatly appreciated.

  jreynaud1

  I run Linux distributions on my desktop PC and from your description, the problem is almost certainly the lack of video drivers, especially in the case of the AMD video chipsets.

  I'm not familiar with the Ark, but I don't know with Ubuntu, which I had problems driver AMD for several versions now, and the last, Xenial 16.04, fglrx drivers simply will NOT work because they are not supported with the new version of the kernel and will not be - as AMD is working on a new driver open source to replace fglrx.

  HP forums provides no support for Linux issues, if my suggestion is to check with the forums Linux appropriate for each distribution.

  In addition, as you use a video chipset AMD, you might find the info you need on the Phoronix forums: AMD/ATI Linux - Phoronix Forums

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• GPU on Satellite P100-217 fan never turns on running Linux Gentoo

  Hello

  I am running Linux (Gentoo) on my P100-217 (Geforce 7600). The graphic card fan never turns on, and the GPU gets to a temperature higher than 100 ° C when executing some 3d games. When I boot to windows, the graphics fan does not turn and the GPU is much cooler, running the same games.

  Can someone Toshiba please give me some information on how to solve this problem under Linux.

  Here is some additional information:
  Driver version: 1.0.9755
  nvclock version: 0.80.
  Nvclock message: you the fanspeed adjustment only is not supported on your video card type

  Thank you

  Chris

  Hello

  I'm not Toshiba, but maybe I can help you too.

  Type in the console:

  detection sensors

  and follow the instructions. Maybe you need to compile some kernel modules yourself.

• How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program.  There must be a way inside the adobe progra

  How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program.  There must be a way inside the adobe program to turn off because I turned it on by clicking with the right button on an image in the editor of the first, and then when you are prompted, he said he would run in the background and I said okay, now I can't stop it! .  It appears in earlier versions of first items under Edit-> Preferences-> media analysis you could uncheck it to turn it off.  But there is only a media section and in this tab, there is no automatic Analyzer to be seen.  Thanks in advance for any advice

  Rebeccah

  What computer operating system? You are in the first elements 13/13.1 editor preferences or in organizing elements 13/13.1 preferences?

  Where are you looking for in organizing elements 13/13.1 that you do not see Edit Menu/preferences /-media analysis that you do not see the options of AutoAnalzyer.

  Organizing elements 13/13.1 preferences...

  

  Please point out where you find a command to run AutoAnalzyer in the background in 13/13.1. If I right click a file, I see AutoAnalzyer perform what seems to be a time run command automatic Analyzer of a file.

  Please specify.

  Thank you.

  RTA

• See Agent 5.2 and Teradici Audio Driver

  
  Hello

  Anyone to see problems with the 5.2 view Agent and Teradici Audio Driver? It seems that the sound driver is not a signed driver. You include the Audio from VMware driver in the installation of the Agent from the view when you use the Audio of Teradici driver?

  I see some issues, but I use Unidesk, so I can't say if the questions are seen or associated Unidesk.

  Mike

  Mike,

  Looks like we are in a similar situation - Unidesk, view and the driver audio Teradici. I tried to deploy the version 1.2.0 pilots Teradici Audio with the Agent of the view (version 5.1.1 and 5.1.2 5.2.0), with any of these versions of the agent, the pilot would be not loaded on my virtual desktop PC and there is an error in the Device Manager. The detailed status message on which has been "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) ».

  I went back to version 1.1.0 of Teradici audio driver and was able to use it with problems on my layers agent 5.1.1, 5.1.3 and 5.2.0. Of course the downside of this, I can tell you I had the problem, but never understood whence he came.

  Your other question on deployment or deploy not drivers audio view Agent, I did install driver audio Teradici inside and without the audio driver see it installed. Currently I am doing all my installs the agent from view without the audio driver to see agent and just install the driver of Teradici. This is for two reasons: 1) I have seen cases where the default audio device is not always the Teradici driver (of course it's surface in places where I NEED it to be the default and 2) he works a few combintions view agent and the audio driver Teradici where install the audio Teradici causes the audio to view device is no longer so your end users end up with no noise at all. -Teradici or VMware had an article about it, I don't have casual not remember the exact version involved. So far with just the Teradici audio drivers installed, I didn't all sound related issue I reported.

  Jeremy Ey

• What is the best way to upgrade versions of the agent on linux remote or solar

  What is the best way to upgrade versions of the agent on linux remote or solar systems.
  
  Is it possible once new versions of the agent software is downloaded to clients to upgrade
  customers without logging in each of them.

  automate, automate, automate.

  I would use SSH keys and a quickie shell script to do the job for me.

  #! / bin/sh

  HOST = ' 'host_list cat.
  for host in ${HOST}
  do
  echo ' SCP'ing to ${host} ".
  SCP o ConnectTimeout = 5 . tar.gz hyperic@${host}:/home/hyperic/
  echo ' work on ${host} ".
  SSH o ConnectTimeout = 5 hyperic@${host} ' / home/hyperic //hq-agent stop'
  SSH o ConnectTimeout = 5 hyperic@${host} ' cd/home/hyperic; "tar - zxvf . tar.gz.
  SSH o ConnectTimeout = 5 hyperic@${host} ' / home/hyperic //hq-agent start'

  If [$?-no 0]
  then
  echo "${host} - agent was able to start.
  FI
  fact

• running Linux rather than Windows as host

  Hello

  I'm trying to start learning of VMware and I wonder which version of the operating system, it is best to run it as a host for VM workstation? Inside of the workstation, I'll run 2 instances of ESXi machines so I'll try to save some resources with Linux. Don't you think it's just if I install Linux instead of Windows 7? I really save you 1 GB of RAM, or not? (theoretically for 64-bit Linux, it's 384-512 MB of RAM and Windows 7, it's nearly 2 GB of RAM)

  The bottom line is made the effort running Linux rather than Windows is worthing? Because it's a pain even with Linux.

  Thanks in advance for your advice!

  Catalin

  I think that you run your host operating system with what you are comfortable with.  My choice would be Windows 7 x 64.  ESXi running as a virtual machine in my computer would work fine, just follow a few best practices recommendations.

  Nested VMs running

  The VMware products and material assistance to virtualization (VT-x/AMD-V)

  Troubleshooting problems Intel VT - x

  http://KB.VMware.com/kb/1030283

  http://www.Vladan.fr/how-to-install-ESXi-4-1-inside-of-VMware-Workstation-7-1/

• Run an agent on Linux error

  Hi all
  
  We are trying the install and Scheduler agent in a box of linux using an existing installation of ODI.
  
  We copied the file jre and oracledi in the unix box and Setup $ODI_HOME
  
  Missing something?
  
  Thank you
  
  [oracle@vodbs015 bin] $ export ODI_HOME = / u00/app/oracle/ODIHome/oracledi
  [oracle@vodbs015 bin] $. agentscheduler.sh - name = VODBS015_20910
  : command not found
  : command not found
  : command not found
  : command not found
  -bash: /u00/app/oracle/ODIHome/oracledi/bin/odiparams.sh: line 134: syntax error near a 'pected token' do
  -bash: /u00/app/oracle/ODIHome/oracledi/bin/odiparams.sh: line 134: "because I in $ODI_HOME/l'b/*.zip; do
  -bash: oracle.odi.Agent: command not found

  Hello

  You must use the correct installation for the platform you are using. I would like to download the right version of oracle:

  http://www.Oracle.com/technetwork/middleware/data-integrator/downloads/index.html

  delete what you have copied to linux, ftp and unzip the correct installation of linux. Then change the odiparams.sh in function.

  Thank you

  BOS

• See Agent on Win 2003 R2

  I'm trying to add some of my servers to see to make them easily accessible through my client to view.  I installed the agent of the view on the first server and restarted (windows 2003 r2).  When I go to create the pool and get to the point where I select the VM and I get a blank page.  If you click Show all, you see the machines and if you click on the 3 points you receive a message that says operating system not supported.  Please see the screenshot below.  Not sure where I'm wrong.  The server doesn't have a firewall running, no errors in the logs, and the view agent is running.

  Any thoughts?

  Brad

  

  I'm not confused.  What you want to do is not supported as seen on page 15 installation guide, http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf.    The agent is only supported when it is installed inside a server with the terminal server role server and configuration as well in a pool of TS.

• Why can't I download creative Cloud applications when running Linux?

  With the help of Linux (Mint), when you try to download any application CC, for example Photoshop CC says:

  "You are using an operating system that Photoshop no longer supports. See system requirements below for a complete list of the supported platforms. »

  I have an active subscription, why do you care what operating system I run? (I'm not talking about installation or something else)

  In my opinion it is a bad habit to exclude the download of the products they paid for your customers!

  Looking forward to an explanation! Thank you.

  Most of the Adobe applications runs only on Windows and Mac OS. You can see the system requirements by going to https://creative.adobe.com/products and choose a product. Then choose the system requirements tab. So for Photoshop, you will see:

  

  There is the Soft Touch moving mostly on iOS with PS Touch market on Android too.

  No applications that didn't run on Linux.

• running linux mailserver as guest-networking-bridge

  you try to run a mail server in a linux comments xp bridge Configuration ip address of host

  192.168.1.1 if someone telnet from my static ip how they can see my mail server on port 25

  a bridge network configuration has the State ip address as the host?

  Tim

  If you want to run a mail server in a guest who will accept inbound connections you most likely want to set up with Bridged networking.  This will actually put the prompt on the same network as your host is on.  After this, the same installation rules would apply to a physical system running a mail server:

  Configure the host with a static IP address on your home network.  Verify that you can telnet to port 25 of the guest of a system on your home network.

  Next, configure your box home firewall/NAT to redirect incoming connections on port TCP 25 for the static IP address that you have given your comments.  Then test that you can telnet to port 25 of a system outside your home network.

  After that, you must configure the DNS records that are appropriate for your domain so that external hosts know how to communicate with your e-mail server.

• FF does not start yesterday; running Linux Mint 14 in VirtualBox; updated to 39.03

  Since yesterday, Firefox does not start when I click the icon. There seems to be some activity, but the window never opens.

  I use the version of Linux Mint 14 in Virtual Box.

  In the terminal, I tried firefox-safe-mode

  I get:
  "Error: platform version ' 39.0.3 ' is not compatible with
  minVersion > = 39.0
  maxVersion < = 39.0

  I would appreciate help with this.

  PS Since I can't start Firefox data below is not the version I have the problem with.

  This is the latest information that I could find on the version of hotfix for your version of Linux:

  • http://linuxg.NET/install-Firefox-on-Linux/

  I understand that Firefox will not start, please also see these troubleshooting steps:

  • Firefox does not start - solutions

• Satellite P100-120 overheating running Linux Ubuntu 9.10

  Hello world

  I use Ubuntu 9.10 running on a laptop Toshiba Satellite P100-120; I have a problem of overheating and the fan never put to cool my laptop.
  Looking around, I found that several models of Toshiba Satellite have the same problem and I found that the only solution work seems to update the DSDT file by exploiting this feature on Linux kernels (kernel argument acpi = off is not a solution).

  The problem is that the current Linux kernel of Ubuntu distributions can't take no more (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/395239).
  Given that this problem seems to affect many models of Toshiba/people, I don't know that Toshiba has corrected it to a patch of BIOS; is there a reliable to tell me how I can find this patch?
  I think that we need a BIOS patch because I tried to read the DSDT and indeed it includes bugs (if compile you it with the compiler Intel as described, you can find them).

  Commands to show bugs:
  sudo cat/proc/acpi/dsdt > dsdt.dat
  sudo iasl d dsdt.dat
  sudo iasl tcs - a.dsl

  In the case that Toshiba does not provide a patch, can someone suggest me the reasons (I know that Toshiba is not officially compatible with Linux, but today the Linux community should be accompanied by resellers of computers)?

  Thanks in advance
  Simone Campanoni

  Post edited by: SimoneCampanoni

  > In the case Toshiba does not provide a patch...
  That of the problem. Toshiba doesn't support Linux, especially not for this model of laptop, so you have to search solution elsewhere.
  Support Linux costs money, and why do we have if the books are not delivered with Linux.

  In my opinion the best place to find solution or pickup a few tips useful and info is specialized Linux forums and communities.
  What Toshiba about Linux, you will find under:
  http://Linux.Toshiba-DME.co.jp/Linux/

  Good bye

• 500 - 516nc Pavilion: Pavilion that keep me from installing and running Linux

  Hello

  I recently bought the Pavilion 500-516nc with preinstsalled of Windows 8.1. I was intending to set up a dual-boot for the computer, as the seller claims that this machine is suitable for a number of operating systems.  However, I can't install and run the operating system I want.

  UEFI mode, the computer is not USB, or the DVD-ROM and does not offer to start from other sources, with the exception of the Windows boot loader, even after I disabled the 'secure' boot When I go to the legacy, I can actually run the other OS live USB or DVD and I can install it. However, the legacy would not boot from the HARD disk for some reason any (perhaps because the disc capacity is too large?). And I can't find a way to make the system work, I installed through legacy mode UEFI.

  I would not return the unit to the store, because it suits me almost all the other senses, but this issue is a big problem for me. What can we do about it?

  Best regards.

  No452, welcome to the forum.

  I ran the systems dual boot for years using Windows and Ubuntu, Linux.  The best way to do this, it uses two hard disks.  Windows do not play nice with the other OS' are on the same hard disk.

  That said, if you want to install Ubuntu on the same drive, here's a guide that should help you:

  https://help.Ubuntu.com/community/UEFI

  I tried several Linux distributions and found Ubuntu to be the easiest to use.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.