See Connection Server Timeout settings Kicking of active users on!

Similar Questions

• See Connection Manager 4.5 and federated Active Directory

  Hello

  We plan to federate two forests AD (two different companies) and by providing users in the other forest access to our virtual office below.

  My question is, is seen connection manager server 4.5 support federated accounts in a different forest AD?

  My guess is not because of ADAM not knowing about the Federation. But I would like a confirmation of the community.

  Thank you.

  Aaron B

  If there is a transitive trust relationship 2 lanes between the domains in the forest, view supports accounts in other forests.

• See connection to the Server 5 and Windows 2008 R2

  Hello

  I try to install view connection Server 5 under Windows 2008 R2, which takes place under VM on an ESXi 5 server.

  But I still got the error message that my operating system is not supported.

  I have read the system requirements and Windows 2008 R2 with SP1 is listed.

  Is there something I forgot?

  You cannot install the view on a server that is running as a domain controller active directory.

• Download link on the standard view connection server landing page no longer works (see 5.1)

  Hello

  We noticed a problem in the last week or so when clients attempt to download the client to view the launch of our view connection server page.

  The link is https://www.vmware.com/info?id=1109#win

  Who then is forwarded when it lands on the vmware site at

  https://my.VMware.com/Web/VMware/info/slug/desktop_end_user_computing/vmware_horizon_view_clients/1_0#win

  Unfortunately it is no longer available then you get pushed back to the root of the VMware download page.

  After doing a little digging, I discovered that the link to the download of the client page is now

  https://my.VMware.com/Web/VMware/info/slug/desktop_end_user_computing/vmware_horizon_clients/1_0#win

  So, it seems that VMware withdrew the designation of the download page view.

  No doubt other people have this problem too?

  Now, I know that I can change the link on the launch of the connect to Server page, but I'd rather have this fixed on the side of VMware so that I don't have to worry about updating the link when VMware change their website.

  Sincere greetings

  Matt Thurston

  To solve this, had to follow the part of this guide

  http://ituda.com/how-to-customize-the-view-portal-for-client-download-with-VMware-view-5-1/

  Only the part that details how to change the link on the download page.

• See installation connection server DO NOT on Server 2008 R2 Standard

  I can't connect to the server to install in a virtual machine of the Server 2008 R2 Standard.

  I get the same error every time:

  Product: VMware View connection Server - this product cannot be installed on Windows Server 2003 or 64-bit Windows Server 2008. Other operating systems are not supported.

  I use this:

  VMware-viewconnectionserver-x86_64 - 4.6.0 - 366101.exe

  Joint file shows the details of the OS.

  This can be something simple, and I hope someone has an idea for me. I did research much and impossible to find a solution. I'm at the stop on push towards our company forward.

  
  Thank you

  Tommy

  You try to install the view on a domain controller? You get the same error message in this case as well that can be a little confusing, a bug has been raised to improve the installation program to give a specific error for this scenario.

• See connection to the server can be installed on the server vCenter Server?

  Very simple question.

  4.5 View connection server can be installed on the same virtual machine as vCenter 4.1?

  I know that is not optimal.  He would only be in environments very small business (less than 10 users) where to buy two servers for VDI OS licenses would be unaffordable.

  Thank you.

  No, they cannot be installed on the same machine.

  ____________

  blog.eeg3.net | Useful links related to VMware

  If you have found this device or any other post useful, please consider the use of buttons useful/correct for award points.

• How to increase the speed of work and avoid the "Server timeouts" with VPN and?

  Hello!

  I am faced with slow work and delays in Thunderbird to my Linux.

  I have 4 accounts (3 are connected via IMAP) and two of them runs very slowly. Fear that every time I see annoying message at end of the period of the server and each message (same old) opens very slowly and sometimes doesn't open.

  It maybe the problem in services postal themselves, or illustrated by the 4th account is Exchange (which work much faster in fact), but I need to manage that somehow. I think I had a fast enough internet connection.

  I know that the server timeout could be increased, but I have not found this option in the settings. I have 31 TB, and all the settings, I found in Google seems to be linked to the old version with the old interfaces. I went to advanced settings, I'm not sure that it's settings and what value it must contain.

  In addition, has something like 'caching 'mail TB? I mean, during the reception of the new letter - it is "cached" locally, so when I try to read - local version is used until "cache" is cleaned. But when I delete or move the letter to another folder - happening also at the level of the server. I think that if TB could sync all mails and store their values locally this will work much faster.

  Thanks for any possible solution to this.

  It seems to me that I found the root cause of the problem)

  Problem is not in TB, but in these 2 mail services itself. They work poorly when vpn works.

  Will address this issue for messaging services.

• Simple question on Essbase Server security settings

  I have a question on the essbase Server security settings. There are three values that I can put here the connection attempts, password and inactive days discount days. My server is not in safety mode of Shared Services. However, the authentication of users is even outsourced. that is, when you create a new user, I select the "use external authentication.

  
  Question, if I put the password reset days for say 30, does mean that my external authenticated users will have to change their passowrds? My stomach says no and this setting applies only in native mode for authenticated users, but I have to confirm that before I mess with it. Throughout the documentation, he said these settings do not apply to SS security mode, but nowhere does not external authentication option.

  If someone could give me this answer or report where in the documentation corresponding to the answer I will appreciate it a lot.

  Then no problem...

  Essbase have not the ability to change the user Active Directory settings, this setting is applicable to native accounts created in essbase.

  See you soon!

  SH! going

• No Internet connection - Gateway Timeout

  VMware Fusion Version 2.0.2 (146107)

  New MacBook w/Mac OS X 10.5.6

  2.4 GHz Intel Core 2 Duo processor

  4 GB 1067 MHz DDR3 memory

  Startup Disk INTEL X 25-M

  Guest operating system is Windows XP Professional with Service Pack 2

  I purchased and downloaded the merger a few nights ago. As a new mac user, I managed to install VMware Fusion, and then the guest operating system apparently without a hitch. Windows has been activated successfully. The first thing I tried to do was open Internet Explorer to update the operating system. Unfortunately, I'm unable to connect to internet. After spending some time trying to load all the default is homepage, I see:

  Gateway Timeout

  The following error occurred:

  A gateway time-out occurred. The server is inaccessible.

  Raise demand.

  I read 'Understanding Networking in VMware Fusion' and tried to change the network mode from NAT to Bridged, while release and renew the IP address each time. I also disabled the Windows Firewall, which made no difference.

  All I want to do is updated from windows, and did nothing else. So far, my user experience was quite disappointing. If you guys have any advice or suggestions, I would really appreciate it. Thank you.

  AJ

  EDIT: In OS X, I installed Firefox and the official Logitech drivers, and the internet connection is fine.

  What you have relayed by now, we know that this isn't just a merger cause and resolution will come from preforming the same diagnosis and methods as if it were a physical machine.

  What version of Internet Explorer are automatically using and if IE 7 have you tried to uninstall/reinstall?

  Also, there are half a dozen or several DLLs that can be re-recorded to try to correct the problem, but I don't have the list at hand and I would be Microsoft and Google looking for infmation to solve the problem anyway.

  Also I would seek to control panel Internet Options to see if any setting is part of the issue.

  Also if you try to use Windows Update with Firefox here is part of what is being said so automatic updates is an option until the browser IE problem is resolved.

  If you prefer to use another web browser, you can get updates from the Microsoft Download Center , or you can stay up to date with the latest reviews and updates using automatic updates. To activate the automatic updates

  1. click on Startand then click Control Panel.

  2. view function Panel you use, classic or category, do one of the following values:

  Click System, and then click the automatic updates tab.
  Click performance and Maintenance, click System, and then click the automatic updates tab.

  3. click on the desired option. Make sure that automatic updates is not turned off.

• Where information on the complexity of password expiration frequency, timeout settings, etc.?

  My audit people are looking for answers to these questions about creative cloud products (we have Acrobat Pro DC and all Apps):

  (1) Composition of password requirements

  (2) frequency of Expiration

  (3) response to the attempts of unauthorized access

  (4) the system timeout settings

  (5) access restrictions (Time-of-day) (day of week)

  I spent a few hours trying to locate this information without result.

  Can someone at Adobe please provide answers for these questions above?

  We need as soon as POSSIBLE.

  Thank you!

  Composition of the password requirements are visible from the account settings under change password.

  

  The password expires after 24 hours when connected to a Web site. The password does not expire when the desktop application creative Cloud (what you use to install desktop applications Adobe) has signed, but a license check is required every 90 days for an annual subscription and every 30 days is one month subscription.

  Any unauthorized attempt is more complex. If a person has forgotten his password there is a password change process. Repeated attempts to sign will trigger a dialog box asking you to contact Customer Support.

  Not sure what you mean by system time-out settings. I mentioned earlier how the Web site and desktop application Cloud creative work.

  There is no access restrictions.

  Update:

  If you are going to create an Adobe ID and click in the password field, you can see a short list of password requirements.

  

• Disable the protocols and encryption algorithms in VMware View connection server and security

  Hello

  In my recent deployment, I had a customer request to disable some protocols and encryption at the Server VMware View connection and security. I read some articles and found that this has been achieved by editing the locked.properties file. But when we have edited and replaced the file, users could not connect to the virtual desktop, so came back to us backwards and desktop computers worked fine.

  I found a few articles that we don't need to edit the locked.properties file in VMware view Horizon 6. If someone has done this please guide me through. Here are the details of the protocols and encryption algorithms that should be disabled

  Diffie-Hellman key

  Enable SSL v2/V3 and TLS 1.1 and 1.2

  Disable the RC4 encryption algorithm

  Select the secret of transfer (if possible)

  
  

  VMware view 6 is the connection to the server and security server.
  

  
  

  Thank you.
  

  Hello

  I implemented the following steps (from the manual):

  1. update the JCE policy files to take in charge the high-strength Cipher Suites

  You can add some cipher suites of high resistance for greater assurance, but first you must update the local_policy.jar and US_export_policy.jar files to each server instance and the security strategy for JRE 7 see connection to the server. You update these policy files by downloading the files to extend JCE (Java Cryptography) unlimited strength political jurisdiction from the Oracle Java SE download site 7.

  If you include some high-strength cipher suites in the list and you do not replace the policy files, you cannot restart the VMware view Horizon connection to the Server service.

  Policy files are located in the directory C:\Program View\Server\jre\lib\security from VMware.

  For more information on the download of the JCE unlimited strength jurisdiction policy 7 files, see the Oracle Java SE download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

  After you update the policy files, you need to create backups of the files. If you upgrade the instance of the view connection server or security server, any changes you have made to these files can be replaced, and you may need to restore the backup files.

  2. the changes that policies of global acceptance with ADSI Edit

  • Start the ADSI utility on your computer see connection to the server.
  • In the console tree, select Connect to
  • In the selection or type a unique name text box or a naming context, type the unique name
    DC, DC = vdi is vmware, DC = int.
  • In the type or select a text field or the server box, select or type localhost: 389 or the name of a fully qualified domain (FQDN) of the server computer to connect to port 389 followed view.

  For example: localhost: 389 or mycomputer.mydomain.com:389

  • Expand the tree of the ADSI Editor, OU = properties, select OU = Global, then select OU = common in the right pane.
  • On the object CN = common, Global = UO, UO = properties, select each attribute that you want to change and enter the new list of security protocols or cipher suites.
    I used the following settings:

  EAP-ServerSSLCipherSuites: \LIST:TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA256

  EAP-ServerSSLSecureProtocols_ \LIST:TLSv1.1,TLSv1.2

  It is not the highest possible, but they work with all the features of our customers.

  • Restart the service of VMware view Horizon connection server (server connection and security).

  This is not Activate secret transfer (if possible) , but other points are covered.

  If anyone can give a tip to activate the transfer secret, I would be grateful.

• Faced with Windows 2008 R2 PKI, self-signed certificates & view iPad customer Secure Authentication to view connection server: UGH!

  Background: I was instructed to create a VMware View isolated laboratory test so that HIGHER-UPS can see how they could access the VM dedicated as well as how their developers could put related clones on-the-fly. The project was successful! Yay!

  Addendum: A boss wants to see how VMware View works when accessing his computer virtual dedicated via his iPad on the internet... And who needs a secure SSL connection.

  The problem is: the domain name I chose casually because the lab did not belong to me... So I can't have a real certificate from a trusted commercial certification authority.

  So I'll try to roll my own public Windows 2008 R2 PKI and... All that forcing the iPad to use DC/DNS server in the lab... Get only the single get iPad trust view connection server by importing a sort of certificate.

  Can I export/import a certificate of the CA of DC to the iPad via an attachment... And it happens with confidence. But how to create a login to view the server certificate and electronic-mail/import in the iPad so it happens with confidence? Whenever I try to export the certificate of the certificate of the view connection server store, send it to the iPad and install... The connection server certificate appears as 'not reliable' and the VMware View client will not connect.

  (Of course, I could get sloppy and set the iPad Client to accept untrusted connections... "But I want to solve the problem of approved connection).

  I could be missing something royally on the self-signed certificates and certificate chains.

  (It is a first for me dealing with Active Directory Windows Certificate Services. In the past, I always just installed expensive commercial SSL CA certificates in the certificates Windows Server stores before.)

  Any help or direction, you can provide would be appreciated. I'm rather confused.

  See you soon!

  Keegan

  Hello

  Maybe was your initial problem that the provided certificate must be a descendant of a trusted root, such as Verisign cert or

  the root certificate must be installed and all the intermediate certificates in the trust chain down to the one you use?

  Concerning

  AndyR

• the connection of WebLogic connection pool timeout issue too soon

  We are having a problem with the connection to weblogic pool. Our web application is based on the Spring Framework, deploy to Weblogic using the data source to connect to Oracle. We use a duration of 1 min and max setting of connection pool 15 on weblogic. But the problem that we face is that the pool does not manage any connection as a pool. Each request makes a new connection to the Oracle server and right closed within a few seconds of connection. The number of new connections could be easily up to more than 100 within 10 minutes.
  
  Is there a timeout parameter to check the living connection? Could someone please share your thoughts how to solve the problem? Your help is really appreciated.
  
  Framework Spring (2.5.3), Weblogic (10.3), Oracle (11 g 2)
  
  This is the setting on our data source:
  
  -----------------------
  Driver class: oracle.jdbc.OracleDriver
  
  Initial capacity: 30
  Maximum capacity: 30
  Ability to increment: 1
  Type of instruction Cache: LRU
  Statement Cache Size: 10
  
  Test the connections on the reserve: checked
  Test frequency: 120
  Name of the test Table: SQL SELECT 1 FROM DUAL
  Seconds to trust an idle connection pool: 10
  Reduce the frequency: 900
  The login retry frequency: 0
  Connect time: 0
  Timeout:0 connection inactive
  Maximum pending connection: 2147483647
  Timeout:10 store login
  Reporting deadline:-1
  Ignore the connections in use: checked
  Pins-wire: unchecked
  Remove Infected connections Enabled: checked
  ---------------------
  Of the tracking tool, we have seen the following statistics:
  
  Average number of active connections: 0
  Current number of active connections: 0
  High number of active connections: 1
  Total number of connections: 1523
  Current capacity: 1
  Doesn't have a number of requests for reserve: 46
  More high Num available: 30
  Number of connections leak: 0
  Wait for the high number of seconds: 0
  Number of requests for reserve: 1531
  
  Other parameters are all 0.
  
  --------------------------
  For the adjustment of the spring:
  
  < bean id = "ourdatasource" class = "org.springframework.jndi.JndiObjectFactoryBean" >
  < property name = "jndiName" > < value > weblogic.datasource < / value > < / property >
  
  <!-adds the following to the question if debugging caused by cluster or not->
  < property name = "cache" value = "false" / >
  < property name = "lookupOnStartup" value = "false" / >
  < property name = "proxyInterface" value="javax.sql.DataSource"/ >
  < / bean >

  Try to uncheck ' delete infected enabled connections "and let me know...

• Trying to understand HT203325: cannot connect to the server with the account of the user of a network

  It is a kind of home network issues.  Basically what I want to do is set up a unified environment with the profiles of school boards.  I have a couple of iMacs, a couple of the MacBook and some iPods, iPads and iPhones.

  I would like to run the server on one of my iMac, but this note from Apple shows that I'm having problems.  I don't have a machine that I can run like a dedicated server, I need all machines to be accessible by all users of the Open Directory.

  More I read the note, less I seem to understand.  Forgive me, I'm not an IT professional.  I put in place quite a while Apple (10.4 & 10.5) servers and we had no problem with network users that connect on the real server.

  It was that home directories have been shared with AFP or NFS.  I thought that I saw that they are now shared with AFP or SMB.  Note trying to tell if the server is editing on the one hand, that no other client can mount and access a share until the server has removed it?  This seems to contradict the network share point.

  Is there anyway to overcome this problem?  I tried google, but I see a lot of messages that point to the note from Apple, but not really one that helps solve the problem.  Could I run the server on the two iMacs, put on an OD and share the home directories of the other?  So I think that it would be the base directory is never hosted on the same computer where the authentication takes place.

  Any clarification would be appreciated.

  Thank you

  Brett

  PS: My Mac is fairly new, so I can update all 10.11.2 & I didn't buy server, so I would get the most recent and for that, too.

  Try it.   But I wouldn't expect that you are trying to do will be reliable, and I would not recommend using a server as an interactive workstation - the two tasks are usually in opposite directions.

  If you want to store shared files, that activate the OS X client, or install and use a NAS box.   There is no server need, if networked storage is the goal.

  Running a server means implementation of DNS services locally and many other tasks.   It was possible to get out for the most part without doing that, but 10.5 started to get flaky without services local DNS and security and network authentication are now commonplace, and this does not at all well without local DNS.

  Servers should also be available at all times, and - as often happens - shared systems may be rather less stable that software is modified, the systems are closed down, or otherwise.

  NFS is available on OS X for several years, and some people have manually configured access remotely via NFS.   It is much more common to see the AFP and increasingly used CIFS/SMB, however.

  Of HT203325: users can be local, as is typical of most of the OS X client configurations, or they can be so-called network users - users with their connection directory located elsewhere and often with access and the same password on multiple systems.   If users are configured as users of the server network, then do not allow users to connect directly to the server.   Who - is the server that serves files and directories of itself to itself - is not reliable.  Not in this technical note, and not by what I saw.

• Cannot see and navigate to "settings".

  My sanza clip + can only see and navigate to 'settings', I do not see the other parts of the menu. To try to restore by holding down the right power button turns the unit off. Any ideas?

  Connect it to your pc and reload the firmware.