BlackBerry Z30 very slow receiving and placing calls

Similar Questions

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• Missed, received, cache placed call logs

  Hi all

  I'm having a time difficult trying to find the documentation that describes the limitations/parameters for the call connects IP phones themselves.  I think missed calls for example are stored locally on the device, and if you have configured the extension mobility you can clear the logs on logout.  In addition, if the DN is a shared line, then the calls will not record.  I see also of the side CUCM where you can configure on line or via the options of the user the option to disable logging of the calls.  But what I really want and need to know how many missed calls will be in the log by default (or placed and received).  He is 100, then he begins to replace?  What motivates the time-out, a numerical limit or a time limit?  These parameters are adjustable in all?  The settings or parameters differ by type of device?  I'm looking like crazy to find answers to these questions and I can not find them.

  Hi Jeremiah,.

  Call logs are hard-coded depending on the model of phone in question

  Cisco IP Phone 7960 G and 7940 G featured

  Maximum supported entries 32 each for the calls missed, received,
  and call lists.

  Cisco 7961G IP phone / 7961G - GE and 7941G / 7941G - GE

  100 each for the calls missed, received,

  and call lists.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/7961g_7961g-ge_7941g_7941g-GE/4_1_3/English/usr_adm/enhancements_guide/6141ftrs.PDF

  This information is included in the phone specific IP "User's Guide" for each model. Here is the example for the 7942/7962

  Missed calls, received calls or calls placed. Each stores up to 100 records.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/7962g_7942g/7_1_2/English/user/guide/62enu712.PDF

  And 7945/7965;

  Missed calls, received calls or calls placed. Each stores up to 100 records.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/7965g_7945g/7_0/English/user/guide/65enug70.PDF

  This can be mitigated to "Missed calls" on the lines of sharing IE; You can enable/disable;

  Logging of the calls for shared lines

  --------------------------------------------------------------------------------

  Edge of the information contained in this section does not exist in the online help for Cisco Unified Communications Manager Administration or in any other document 6.1 (x) Cisco Unified Communications Manager, in addition to the release notes.

  --------------------------------------------------------------------------------

  Description

  With the missed call logging for the feature of party lines, the administrator can configure Cisco Unified Communications Manager Administration, or the phone user can configure Cisco Unified CM User Options, so Cisco Unified Communications Manager saves the missed calls in the call history list to one aspect of shared specified on a phone line.

  Missed calls

  The missed calls feature allows the administrator to phone specify if missed calls will be get saved to the directory of missed calls for an appearance of the given line. The following properties apply to the function of missed calls:

  The line can represent a shared row or a number from the phonebook. The default behavior records all calls missed on all lines.

  Missed calls log operates on a basis of the line. The line can represent a number from the phonebook or a shared row.

  If the phone administrator configures a line appearance (share or not shared), therefore not missed calls get connected, calls to this line never get connected in the directory of journal of missed calls, even if the calls end get forwarded due to no response.

  If more than one line key is configured on a phone, logging of missed calls is based on missed for each row call log.

  Logging of missed calls is controlled by a configuration switch parameter sent to the phone in the configuration file.

  The missed call log configuration does not affect the existing or previous call log items.

  Calls on lines that are not registered do not affect the Missed Call new status message.

  If phone administrator disables the functionality of missed calls on the appearance of the configured line, missed calls get not appear in the call history missed on this aspect of the line.

  In addition to these properties, the following properties continue to apply to all calls:

  All phone calls appear in the log of calls received, regardless of the line on which they were received.

  All calls made from a phone appear in the log of the calls, regardless of whether they have been placed from a primary or shared line.

  The function of missed calls gets supported on the following phones running SCCP and SIP:

  Cisco Unified IP Phone 7906G

  Cisco Unified IP Phone 7911G

  Cisco Unified IP Phone 7931 G (SCCP only)

  Cisco Unified IP Phone 7941 G/GE

  Cisco Unified IP Phone 7942G

  Cisco Unified IP Phone 7945G

  Cisco Unified IP Phone 7961 G/GE

  Cisco Unified IP Phone 7962G

  Cisco Unified IP Phone 7965G

  Cisco Unified IP Phone 7970G - GE

  Cisco Unified IP Phone 7971G - GE

  Cisco Unified IP Phone 7975G

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/rel_notes/6_1_3/CUCM-rel_note-613.html#wp475040

  See you soon!
  Rob

  "Everything is broken" - Bob Dylan

• BlackBerry Smartphones very slow CPU speed.

  We have two BB bold 9900, we're working very well the other has very slow response to each action. even using the touchpad to navigate a huge delays. We also get the small icon of black clock all the time. There are many cases when the process is never ending and he must remove the batteery to reset the phone. Any thoughts? Thank you.

  A battery pull is always recommended to take the first step.  You have done this, then I would jump straight to a reload of the OS.  Why are we so slow 9900 and the other is not?  I really have no reason for that, but the reload of the operating system is a good step to take.  Not to worry even upgrade to a newer version, sometimes the same reload OS will do (update if a new version is available is however also recommended).

  To do this, connect your phone to your PC and open BlackBerry Desktop Software.  Click on the device at the top of the software, then click on restore.  Load the last restore point.

  Let us know if that helps you.

• Very slow contacts and to open and contacts being deleted

  I found that my contacts are very slow to load and change and that contacts are being deleted without my knowledge.

  Hi svenvy,
  I don't know where you keep your contacts but maybe it's that you need to condense their or check if the Web page contains errors. If it's Firefox, please visit: Firefox is slow - how to make it faster

• Very slow start and run for Dell Inspiron 6400 XP times

  "I have a problem with an Inspiron 6400 brought to ' horribly slow start and run time.  XP Pro 32 bit SP3 patched up to date.  Cleaned up a lot of "undesirable", as the partially uninstalled programs, cleaned the files temporary etc. with CCleaner, cleaned and optimized the registry afer all the cleaning has been done, defragmented, tried to start without any of the boot files, disabled all unnecessary services and uninstalled virus checking software, (but ran several anti-virus controls) etc. - no help.   Safe Start Mode is faster, but... not at all normal - 1 1/2 minutes of screen to logon instead of close to 3 minutes.  A lot of memory (2 GB), which rises to 600 to 700 MB runnng all the stuff I've tried.  Hard drive is 1/3 used out of 120 GB with a 2 GB swap file.

  One thing I'm still scratching my head over - beyond the horribly slow boot - is very slow access to files even though everything seems to work normally, but as molasses in January.  Looking at the performance of the Task Manager tab when I run a copy of a file (whether via a cmd window or with Windows Explorer), I see a near max processor would be and the other with a small business.  Even if the customer says he had been getting worse for some time, after checking and cleaning of all things 'normal', my next thought was perhaps a bad disk or disk controller driver, but chkdsk ran very well (although it took hours) even if I ' d I have already updated all drivers (and even the DVD firmware and BIOS) on the Dell web site.  Oh, and I ran Dell Diagnostics (from bootable CD) updates all with no errors found.  And access to the slow file even with symptoms had max-processor occur with a copy of the file on a USB key that seems to eliminiate the hard disk, the disk controller and the pilot.

  The other interesting part of the display for a file copy task manager is that the processes tab simply shows System Idle 97 to 99%, with a percentage of casual for other processes as Explorer while I see 1 max out procesor on the performance tab.  That the same copy on your desktop shows 3-4% of the CPU usage and who is with active antivirus software.  I'm almost ready to fall toward a Windows reinstall, but would like to find the real reason behind this problem of puzzle...

  It of almost as if he's using PIO instead of DMA disk access, but... don't know how/where to test this.

  Look at:

  http://Windows-XP-tricks.com/direct-memory-access-DMA-on-IDE-hard-drive.php

  and

  http://winhlp.com/node/10

  Solved!   Thanks for the links, especially to each other.  An old but still a goodie!

  For those who have enquring spirits (and anyone else who stumbles across this thread), the primary IDE controller has been set to PIO and locked it.  Who would have thought that Windows slowly reduced the transfer speed, whenever he saw 6 errors on an IDE device until it has been reduced to PIO and then he locked it?  But the procedures described in the link of winhlp.com showed how to solve the problem.

  There are actually several problems that led to the final symptoms.  According to KB817472, the Atapi.sys has been improved in XP SP2 only degrade the speed of transfer on 6 consecutive errors instead of 6 cumulative errors.  And even though everything I have (Microsoft update) was seen and showed that this area was to SP3, I found that the driver for the controller layer IDE was the SP2 version.  Someone ran sfc previously perhaps?

  Oh, and I know now that the Task Manager process tab does not time processor kernal, but the performance tab.  Good to know...

  Thanks again to all who have responded.  Starting at the time of connection-question now is 40 seconds.   You'll love Untra DMA mode 5.   There is still a lingering question in my mind, since I've had the same symptoms of slow copy of a file on a flash drive.  Perhaps a link in some way to the way that Windows treats a flashdrive as a "drive"...

• Since installing Windows 10, Thunderbird very slow load and run. Is there any solution for this? RESOLVED itself. cause: unknown

  It is not the only slow feature on this PC since installation W10. Internet Explorer is also very slow to load.

  Start * Windows * safe mode with active network
  -win10 http://windows.microsoft.com/en-us/windows-10/change-startup-settings-in-windows-10
  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?
  Just reply to inform us of the results.

• BlackBerry Smartphones Seems this receiver and mike do not work

  Hello

  I got a new BB Torch 9810 two days back. It was working fine so far. All of a sudden today morning, I realized that when someone calls me and I take the call, I don't hear anything. If I say something that does not reach the other person. It seems that the receiver or the microphone on the phone has stopped working since today morning. It was working fine until yesterday.

  When I call comeon, the call goes through but I am not able to hear the sound intensity or the person... After doing some tests, it seems that when I press the button "Mute on / off" a few times, the other person is able to hear my voice during a very short interval...

  I checked the speakers are working correctly, eamil is fine, notification sounds are very good...

  It seems to me a H/W issue, but given the quality of BB (main reason from the Nokia E72), I tend to not believe.

  Anyone seen this before? If so, any suggestions are very much appreciated...

  Thank you in advance!

  Kind regards

  Vikram

  Ok.. After a few game, I re-sitting the SIM card and now the phone seems to work very well. Although that do not know if this is the real problem... However after re-making the SIM card, the desktop folder (where I used to get my corporate mails) went... Is it possible that I can get that back?

• Satellite L300 - very slow start and freezes

  Hi all

  I have a Satellite L300, who treated me well - but more 2 months ago really slow and freezes quite often. I have anti virus, spybot etc and come up with nothing.

  Last night I tried to reformat the system by pressing 0 did not work so tried with F8 which I would like to make a longer scan but no reformatting. I am now very happy that I failed to do the reformat because I bought windows 7 after the initial purchase of the laptop.

  Any ideas anyone - or any person with same/simular problems?

  Hey,.

  This means that you have installed right now and not preinstalled version of Windows Windows 7?

  Well, in this case HARD drive recovery option is no longer available. You can do it on preinstalled only Windows.

  To format your laptop, you need Toshiba recovery disc.
  Did you create it?

• BlackBerry Z30 very Urgent

  Dear concern,

  About 7 hours back I did reset my BB Z30 smartphone. However, the green line stuck on 80% and no movement sanymore. I don't have a lot of data on my phone and also I removed the SD card before factory reset.

  Don't know what to do now. Please help me. I need my phone tomorrow, emergency.

  Thanks /.

  I read some cases of an erasure of security taking 48-72 hours.

  1. you can try rebotting the Z30, and who could argue the wipe.

  2 - or you can meet BBerror0015.

  1 reboot: with the BlackBerry device turned on, using the keys of volume of the edge side, press and hold the volume keys for about 20 seconds and the time of the Up, ignoring the initial message of screenshot... the screen go black, reboot.

  2. read the troubleshooting tips for error Knowledge Base BB10-0015
  0015 - file unrecoverable system error has been detected.
  More information can be found here: http://support.blackberry.com/kb/articleDetail?ArticleNumber=000034545

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/error-BB10-0015/m-p/2685103#M45693

  I recommend you use a charger automatic file to restore the operating system on your device:
  https://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/upgrading-OS10-devices-using-aut...

• Classic phone holder blackBerry SUCKS! Poor training and the call centre in the Philippines!

  I bought a classic there is about 1 1/2 weeks and had not yet found the user guide. I called their phone support several times with simple questions and most of the time, they could not answer questions or gave me completely false answers. For example, I didn't know how to access the FM radio function and support BB told me to contact the carrier to bring them to market. I knew that the answer was wrong and once I found and read the guide to the user discovered how access FM radio. My point is that these representatives have a knowledge on the classic. They are located in the Philippines and their English skills are limited and it is difficult to communicate with them. If anyone has had this experience and anyone could explain why the BB spend the resources necessary to make these fine products and then skimp not big time on the customer support? And if BB company listen to MOVE YOUR PHONE SUPPORT EITHER to THE UNITED STATES or CANADA for YOUR CLIENTS IN THE UNITED STATES AND MAKE SURE ENGLISH IS THEIR mother TONGUE. And please do not hire someone who has lived in the United States or Canada for a short period of time and has recently learned to speak English.

  That support number is added to the support you get from your provider. The way it is supposed to work is that att with your phone number. Either they don't solve your problem, or that they degenerate to BlackBerry supported which is the same as the paid support, but if they skyrocket you, you do not pay anything. The problem is that carriers are too lazy to do the climbing when / if necessary.

• BlackBerry Z30 BlackBerry z30 very hot when you play games

  I play games call iron man 3. I play 5 min, then hot. Sorry for the bad English.

  It's normal. Even with all devices, be it an Apple, Samsung and BlackBerry.

  Games will consume much more energy than typical applications. Because he needs more graphics processing, therefore, more power is consumed. So that power to be fed, more electricity is used, therefore, battery will empty faster. As well the battery more quickly drain and increase the heat generated in the results of calculation and more

• BlackBerry Z10 GPS with Blackberry Maps, very slow work

  Hello. I use Blackberry Maps often, but have noticed that the GPS on my phone started to work very slowly.

  When I turn it on it takes a few minutes to find my position. And when I enter a destination for navigation, he made several attempts to trace road and especially returns with the message: "cannot find your GPS position. Move to a location with a clear view of the sky view, and then try again (1013). Even when I'm standing outside, under a clear sky and open, I always get this message...

  Does someone can give some indication of what can be the problem and possible solutions.

  Including J Sanders... Thanks for your help.

• IPad2 very slow apps and condensation.

  IT seems that after each upgraded my Ipad IOS slows down more and more.  Now he begins to drop apps while I'm in them and return to the home screen.  I tried to restart the system, but apparently not helped at all.

  Not enough storage space available can cause the symptoms you describe.

  Tap settings > general > then drag down to available .

  If it is less than 500 MB, you must free storage of at least 1 GB.

  Make sure you restart your iPad After erasing data to see a difference in available storage space.

• Very slow grip and HP pavilion dv6

  Help me pavilion computer HP dv6 bought 1 and there is a year and a half, and these days in the first 5 minutes after the start, he crashes and is also slow. I have to force reboot holding the power button in front of stop suspension. I did a full scan on the titanium trend micro but he says everything is fine, and today it maintains suspended anything, could not get the computer to work and cannot access the verification of reliability because it loads for a long time and then crashes my computer. Right now my computer says one of my disks needs to be checked for consistency and scans now. How can I fix hanging and slow?

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Kind regards

  DP - K