See the establishment of a control on a tab

Similar Questions

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• Can not see the plan network and Control Panel

  Windows 7 64 bit, I can't show my control panel.  The window does not load.  First of all, I had trouble with page load network and Internet.  Now it crashes when I try to open it.  My most recent change was the installation of a new firewall.  I just wanted to see if I should add anything whatsoever to the title of the secure networks.

  I can now display the network map.  After the installation of the station, I stopped and restarted.  The system should have distinguished between that and a reboot.  Thank you.

• Updates, mainly updates, which are manually downloaded and installed see the square Windows XP - > Control Panel - > Add / Remove programs. ?

  Updates, mainly critical updates, which are downloaded and installed manually appear actually Windows XP-> Control Panel-> Add / Remove programs. I use NO automatic update of Windows. I run a batch file to install more than 20 + critical updates, but none of them are showing up for me in the list "Add / Remove Programs". Yes, I have the check box 'Show updates' checked. System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  Yes. They should display Control Panel Add or remove.

  TaurArian [MVP] 2005-2010 - Update Services

• See the establishment of a new line when an event is triggered

  Hello
  
  I have a requirement where I have to create a new line when you click on a button to add a line.
  
  In order to complete the requirement, I created a rowLayout region on the page and in the controller, I add the childs to the region in the PR.
  Childs fit into the same line... But I'm not able to add a child in the following line...
  
  Any body have any idea... so please help...
  
  It's urgent... any help will be appreciated...

  We should not change the properties of the bean in the processFormReuest method. It's this error message says.

  Bean Web properties can be modified in the processFormData or processFormRequest controller method. Web > bean properties should be modified in the processRequest only method.

  To create a new line, best option is to use the advanced table. That it has an option to create a button that will create a new row in the table.

  Refer to "Add rows" in the section "Advanced Tables" in the developer's Guide.

  -Anand

• When Mozilla online banking does not permit me to see the details of a transaction so that Internet Explorer will allow it. Mozilla has been done, but not now.

  I do my banking online with Bank of America, usually using Mozilla Firefox. Recently I noticed when I clicked on a banking transaction to see the "details" or print only this particular operation, it only allows me to see the details.

  Previously, whenever I clicked on a transaction, to see the image of a control I wrote for example, he always brought to the top of an image of the cheque. Now, he won't do it.

  If I use Internet Explorer, I can click on a specific bank transaction and see the details, exactly how I used to be able to do this with Mozilla Firefox.

  Therefore, the problem is with Mozilla and not the website of Bank of America, right?

  The suggestion to disable Adblock 2.4... "worked. "He solved my problem... Thanks a lot guys... problem solved with a click of the mouse. I can't tell you how much I appreciate the help... the technical support worked! Problem solved!

• See the development

  For developers of Adobe CC: would be very helpful to add the "Point of Focus see the establishment" in Photoshop and Lightroom. is this possible?

  repost you in the Photoshop forum.

  I highly recommend that you give your opinion and vote for the existing feature request in the Adobe official feedback forum, as suggested above: Lightroom / Camera Raw: view focus camera information. Photoshop community customer family this forum (and the corresponding Photoshop forum) are mainly developers including Adobe forums users rarely participate.  Adobe has asked that all product, bugs, comments and feature requests will be posted on the official feedback forum.   It is unlikely that the poster in the Photoshop forum will influence any on Adobe.

• Can't see the new Photoshop CC interface

  I use CC - audit "about Photoshop" in the menu file confirms that, but I do not see some new elements of CC interface.  In particular, I don't see the new layer comp controls.  Any thoughts?

  CC of Photoshop and Photoshop CC 2014 are two completely separate applications.

  If you choose Help - system information and see 14.x.x in the version field, you use the other oldest.

  He settled under a separate position in the creative cloud application.

  

  -Christmas

• can't see the front panel control

  I took over a program written in LabVIEW 2013.

  When I right click and select find control on a control path in the block diagram, the Panel is displayed, but I do not see the trajectory control.

  Control is not * hidden, because the choice for the control to hide to the shortcut menu is available.

  The façade is divided into two with a separator. -What is the cause?

  EDIT: The control is in the left pane. Y at - it a trick to know is where is the control?

  I guess that's outside the visible Panel. Maybe if you double-click on the terminal, the control is selected, and you can move with the arrows until you see.

• Can't see the terminal emulator port after all control with VISA

  Hello

  I created a LabVIEW VI to control cycle to PWM channels on a microcontroller FRDM KE02Z reports. The microcontroller, programmed in CodeWarrior, is set up to receive an an input of the terminal string and break it in two parts (the channel name and ratio), which are then applied to the PWM. The code works and I tested with the 2.9 Termite and a Logic Analyzer before ordering through LabVIEW. The problem I had, though, is that I have to completely close LabVIEW to see the port on the new Termite and vice versa.

  Previously, I had problems with VI after I something else in it, even a VI almost identical, more open as he was using the same port. I get errors and be unable to get my VI to work again unless I restarted LabVIEW. I was able to fix by adding a VISA flush the IO buffer according to a discussion earlier (http://forums.ni.com/t5/LabVIEW/Timing-issues-with-Serial-Read-Write-can-t-achieve-terminal/m-p/2636... once the configuration of the Port series and at least now I can jump between the screws I am still unable to see the port jumps between LabVIEW and termite, unless I close one;) Close VISA and the closure of the VI are not enough, I must close LabVIEW himself. Is it possible to achieve only within the VI? For example using a VISA or VISA clear Flush at the end (after closing VISA)? If Yes, what is the difference/preference between them?

  As I mentioned previously, the VI is functional, but I would like to know what is happening for future considerations. Would appreciate any advice.

  Hope to hear from you,
  Yusif Nurizade

  You have not wired resource VISA through the stop event name so it doesn't close anything.

• You see the IP addresses of the devices listed on the parental control?

  Is - it there anyway I can see the IP addresses of my family security "devices" devices list?

  Previous title - your devices

  Hi Ruben Soltren,.

  Please submit your query. I understand how it was to have this feature in parental control, but currently, we have no option. What we can do is to send this as a feedback through this link so that our product team will be aware of the suggestions of our users of the product.

  If you have other concerns, feel free to post back.

  Kind regards

  Richard

• I don't see the internal microphone on the control panel

  I clicked on do not use the microphone inside. It was supposed to be a temporary measure. Now the internal mic has disappeared from the Audio tab on the control panel so I can restore.

  I would like to come back to the internal mic. I have a Sony VGC-JS1e

  Thanks for any help

  Hello
   
  Try these steps and it should allow the listener to the back:
   
  1. open the control panel. (Classic view)
   
  NOTE: Open the start menu and click on the menu button of the control panel.
   
  2. click on the audio icon.
   
  3. click on the recording tab.
   
  NOTE: This also works in the reading tab, but there are usually no hidden audio devices there.
   
  4. right click on an empty area and click Show disabled devices.
   
  5. you will now see the audio devices disabled with the arrow pointing down on them.
   
  NOTE: These audio devices may vary according to the audio card installed or chip you have.
   
  6. right-click on each listed off audio device that you want to activate and click Activate.
   
  7. you will now see this when the audio devices are enabled.
   
  NOTE: You can now change the property settings on these audio devices in the way you want.
   
  8. click OK to close the sound window.
   

• Windows 7 can not "see" the files on my external hard drive all of a sudden after I used ICACLS to give me full control.

  I used ICACLS in a command prompt high to give me all permissions for all on the external hard drive. I do not share the disk or remove permissions from any other 'user' but all of a sudden the guest not to see the files on the disc and I don't know what to do about it. But when I open a window and go outside, the files are there, I can access it, use them in all cases, I would normally.

  Anyone has an idea why an elevated command prompt would not be able to see the files that are clearly on the external hard drive? There is just something not right on command prompt, you see only not the files that are there.

  Thanks in advance

  Update: it turns out that there seems to be some kind of conflict between the UAC and the Administrators group. Don't know how I was touched, but I finally finished refusing authorization in writing system on my external hard drive. Suddenly Builtin Administrator, users of Builtin and NT Authority stood, one of them, or another group, resumed training, locked read-only access to all files, and then he took it a little further and removed my ability to write attributes or read them. I was forced to use a back up 'Admin I have on standby with a third I reapplied my main administrator permissions, but still denied access. After doing things with ICACLS, I was able to get a partial control, but I still couldn't save.

  At the end of the road, it turns out that an external hard drive formatted in NTFS is recognized by the computer as a disk fixed, as if it were part of the computer, and there it was treated as such, given my file system files by locking the.

  Even with the hidden Builtin Administrator I activated, I couldn't access the files. I finally had to move all the girls to the drive c:\ and format the external drive with exFat so that the system do not think that he was part of the computer. Unfortunately, I can never depend on having a System Image backup because exFat cannot have a writing for her.

  I have full access, as well as anyone and everyone, there is no permissions on exFat, so it's a compromise, better than the system for the control of my own computer ruined combat...

  Luke

• To see the files in your repository to define Version control settings.

  I use Dreamweaver CC every day (Windows 7). Dreamweaver is updated. Today, I receive the following message if poster for all the sites that I try to work. "See the files in your repository, you must set its Version control settings."

  When I go into the settings of Version control, access is set to 'NONE' and the rest of the controls are grayed out.

  Any ideas why it would start now?

  How can I fix it.

  Ok.  Do a clean reinstall with the cleanup of CC tools.

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Nancy O.

• see the online page size is too large to reach the controls of the pc

  looking at a site for a gallery of art via a google search, I pushed some button to enlarge a visual image and got a full page covering all the mounting bars on the top and the icons at the bottom of my pc screen. even after the computer has been transformed and turning several times this persists with gmail and other sites. If I use internet explorer, the page size is normal. Thanks for this help.

  'F11' to switch in or exit full screen mode.

  If you do not see the scroll bars or miss the ends of the toolbars, see

  • http://KB.mozillazine.org/Resizing_oversize_window