BEFW11S4 version?

Similar Questions

• Problems to connect several devices to BEFW11S4 v4

  I have problems connecting my nintendo wii and laptop at the same time using my wireless router. I have restart my router and then I can connect with one of the devices, but then it cannot connect and vice versa. I have the latest firmware installed for router BEFW11S4 version 4. How can I do for my Wii and the laptop can be connected at the same time?

  Just reset your router...

  Press and hold the button of reset for 30 seconds...
  Then, unplug the Dungeon to be able to hold down the reset for another 30 seconds button...
  Plug the power back and hold the button of reset for 30 seconds...
  Release the reset button...

  If your Internet Service is cable follow this
  If your Internet Service is DSL follow this

• Reclassification of BEFW11S4 to WRT54G

  Hello...

  I have a router BEFW11S4 (Version 4).  Because I have received no response here on my problems with the card Intel WIFI Link 5100 AGN, I plan to migrate to the WRT54G (at least, I'm * fairly * assure that this is the model I) because I was told by someone else who has a similar setup to mine THE router worked correctly with the adapter.

  My question: migration of the 'old' to the 'new' router router, are there specific problems that should I worry about the?

  Thank you!

  Just to let everyone know.

  I found that I was able to set the security on the router WRT54G wireless settings

  WPA2 Personal AND then I put the ThinkVantage Access Connections to WPA2 and everything

  seems to work very well (I'm typing this while on the wireless).

  I'm assuming that the dial-up Connections supports WPA2 on Windows XP even though I

  do not upgrade to SP3, nor have I sought the "patch" WPA2 Windows.

  At this point, I want to thank everyone for their help and comments.

  Current configuration:

  Router: WRT54G

  Control the laptop (connected via an Ethernet cable): ThinkPad R52 running Windows XP SP2

  Security settings for the router:

  Disabled SSID broadcast

  WPA2 with AES for password security

  MAC address filtering.

  Portable receiver:

  ThinkPad W500 Windows XP SP2

  Using Access Connections Version 5.20 (latest version) set to use WPA2 and AES for the password

  Zvi-

• Problem after upgrading my version of firmware Linksys router BEFW11S4 t0 1.44.2z

  I have a using a Linksys BEFW11S4 router and have recently updated the firmware
  the version 1.44.2z but have experience the following problem.

  -When I want to make changes to the installation, the password and the DHCP tab, the
  router ask me the password. Pls refer
  to peak 1 for screenshot.
  -By entering the password "admin", the router keep prompting me to
  Re-enter the password. So I was unable to
  all of the changes.

  Could someone advise me the solution for this problem? Thank you.

  My router information are as follows,
  Model: BEFW11S4
  Serial number: G2711005225

  Hi, I managed to fix it by reinstalling IE. Thanks to the previous reviews.

• BEFW11S4 v.4 and Vista - firmware upgrade failure

  Hello

  I've had this router for about 5 years, it runs with XP without any problem. Since I got a new laptop with Vista, the wireless connects for an hour or two, and then falls back and I have to unplug the router for five seconds, then reconnect to reconnect (my other laptop with XP has not this problem).

  I understand that there is compatibility between the BEFW11S4 v. 4 and Vista problems so I tried to update the firmware of dartybox.com and kept getting a message that failed. I hard rebooted the router but button of restart 30 seconds and the upgrade has always failed. I so re-set to factory settings through the online admin to the router, re-uploaded the implementation level and still got the emssage failed (I am sure that the model number & version is correct and I download the appropriate firmware upgrade).

  Is there anything else I can do another one) buy a new router; (b) living with school drop-outs; (c) remove Vista and go back to XP?

  Thank you

  Bigdank

  Genius! I have changed the name of code.bin, went to the admin > tab upgrade firmware and the upgrade file. I had a wireless without interruption ever since, even after the awakening of the laptop to sleep.

  Thanks for your help

• Latest firmware for BEFW11S4 v2

  Can someone point me to a (working) link for the latest firmware for a BEFW11S4 v2, which I believe is the 1.45.10 version?

  I found some older posts associated with it, but nothing with a link that still worked.

  Thank you

  Download the BEFW11S4 v2 firmware.

• BEFW11S4 use as Repeater smoothly in a 3-storey house

  I have a BEFW11S4 I try to use a Repeater seemless connected to another router wireless on the 3rd level of the House.   I have both value Static IP, DSL modem is 192.168.0.1, the Router 1 value # value 192.168.0.2 and 192.168.0.3 to the BEFW11S4.  Two routers have enabled with the same SSID, wireless router #1 on channel #1, BEFW11S4 on the #2 channel.  Router # 1A active DHCP, with encryption of 128 bit WEP and MAC address filtering.  BEFW11S4 has same SSID, WEP 128 encryption even / filtering by MAC, but the disabled DHCP address.  They are connected on a CAT 5 cable that connects the basement plugged into one of the connections four port Cat 5, running to one of the connections on the Router 1 # four 25 foot CAT5 port.   Router 1 # is a wireless 54 Mbps, while BEFW11S4 is 10 Mbps.  Network works fine, but the BEFW11S4 is constantly need to be recycled and it falls into a mode where it can no longer be detected.   Can you help me understand how to set the BEFW11S4, so it doesn't cut.  A simple power cycle corrected the problem.

  Thank you

  OK, I tried using the tftp.exe ftp://ftp.linksys.com/pub/network/ program and renamed befw11s4_v4_v1.52.02 in a short name, bef.bin. and I have had the exact same failures.  I was able to download the tool BEFW11S4_v15014_tftp.exe and befw11s4_v4_v1.50.14_code and update to the 1.50.14 level of the firmware.  I thought that maybe the level of intermediate code could be required.  Then tried the steps you suggest again, it does not always work with an INVALID FILE NAME.  While the tool is looking for something specific, other than this level of code.  Can you please place a version of the FLASH TOOL, which will work with the 1.52.02 firmware.  Thank you...

• Can you download OLDER versions of firmware site Web of Cisco?

  Hello

  You just bought a Linksys E2000 to replace a golden oldie Linksys BEFW11S4 Wireless-B.  Yep, Wireless-B, a little outdated.

  Happy to say that the E2000 works very well and is a significant improvement.

  Question: my E2000 has firmware version 1.0.03 (Sep 2010) installed.  I downloaded the latest version 1.0.04)is (Dec 2010), but not him have not yet installed.  Is it possible to download my CURRENT firmware version 1.0.03 on the Cisco site.   I'm sure that the latest version of the firmware is "new and improved", but just in case, I would like to know if it would be possible to download my current version as a "_code.bin" just in case I want to restore the file upgrade.

  In other words, is there a 'Archives' section where you can download older versions of firmware?

  A big thank you for any help you can provide.

  Marty

  Amarillo, Texas

  I don't think they have an archive available to customers. I asked this before, and technicians had no knowledge of an archive. I think you'd have to get in touch with the developers of the firmware, but that would take a while.

• Network of abandonment (intermittent and consistent) - Dell Inspiron 7347, Win 8.1, Linksys BEFW11S4, adapter Intel dual band wireless AC 7265

  History: I just bought a laptop / Tablet Dell Inspiron 7347 (exchanged for another unit, see below).   Problems to maintain a strong connection and when connected, it is very slow.   When it is connected to the wireless router, it maintains a (slow) connection for 3-5 minutes and then craps out (restrict the connection with the yellow "!" on the WiFi in the taskbar).  He then returned to the top of 1 3 minutes later.  It's a coherent continuous cycle.  I tried to reset the default router with no luck.

  All the other devices on this router (office, phone, IPad) all hold the connection without problem at the same time, this device is not.

  Notable: Before I bought this tablet/laptop I bought an Acer Aspire tablet / laptop which had exactly the same problem on my network.  I returned the unit for other reasons (quality of construction etc.), but he had the same OS (Win 8.1).  I don't know if she had the same network adapter.

  What I tried: cycling the router - cycling the modem - router the default factory reset of small animals - U-APSD deactivation on the network card - slapping me hard - offering to the gods...

  What I tried to try: tried to update the drivers for the Intel card using the Intel drivers update (adapter drivers for Win 8.1 and Intel PROset wireless), but he kept time during download because... THE NETWORK IS NOT STABLE! (ugh!)

  The installation program:

  Dell Inspiron 7347
  OS 8.1 win that perform all updates

  Network adapter: Intel dual band wireless AC 7265

  Router: Linksys BEFW11S4 Wireless-B to wide band
  Parameters:

  Host name:	(Required by some ISPs)
  Domain name:	(Required by some ISPs)
  Firmware version:	1.45.7, October 8, 2003
  LAN IP address:	(Address: 00-0C-41-C6-49-B1)
  	.  .  .  (IP address)
  	255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252 (subnet mask)
  Wireless:	(Address: 00-0C-41-C6-49-B1)
  	EnableDisable
  	SSID:
  	SSID broadcast: EnableDisable
  	Channel: 1 2 3 4 5 6 7 8 9 10 11 (field: us.)
  	WEP: MandatoryDisable
  Type of Internet connection:	(Address: 00-0C-41-C6-49-B2)
  	Obtain an IP automatically Static IP PPPoE (for users of SingTel) RAS PPTP Heart Beat Signal select the type of Internet connection that you want to use

  Router password:	(Enter the new password)
  	(Re-entry to confirm)
  UPnP services:	EnableDisable
  Restoration

  
  Default settings:YESNO

  Host name:
  Firmware version:	1.45.7, October 8, 2003
  Login:	Disable
  LAN:	(Address: 00-0C-41-C6-49-B1)
  	IP address: 192.168.1.1 Subnet mask: 255.255.255.0 DHCP server: Activated
  Internet:	(Address: 00-0C-41-C6-49-B2)
  	IP address: 67.249.54.246 Subnet mask: 255.255.224.0 Default gateway: 67.249.32.1 DNS: 209.18.47.61 209.18.47.62 0.0.0.0 Time remaining of the DHCP: 22:33:53

  DHCP server:	Turn off
  From the IP address:	192.168.1.
  Number of DHCP users:
  Client lease time:	minutes (0 means a day)
  DNS 1:

  
  .  .  . 2: .  .  . 3: .  .  . VICTORIES: .  .  .

  I'm puzzled.   Makes me CRAZY!

  FIXED!   Check it out guys.   I'm bothering with deactivation of all the resources of the card network, add-ins etc in the hope of this narrowing... including Bluetooth.   I have a Microsoft Bluetooth mouse for the comfort sculpt ([View:www.microsoft.com/.../sculpt-comfort-mouse:550:0])

  I turned off and BOOM... everything was fine.   Also, I noticed when it was powered up, the speedtest would plunge drastically when I actually moved the mouse during the test.   See below for the result of the test with the mouse.   I can't post a with the mouse on because the test wouldn't even with it on.

  

  Hmmmm... so it turns out that it could be a problem with a product from Ms... go figure.

• Cannot move Mac OS BETA to final version

  I am currently Mac OS version BETA Sierra 10.12.1 Beta (16B2338c)

  I downloaded the final version of macOS Sierra on the app store and attempted to install in addition to the BETA version.

  The error I get is:

  "Impossible to pass this version of macOS because a newer version is installed."

  Which I don't think it is unless the beta continued after launch. If yes how to install the version on it.

  It is a late-2011 macbook pro, but I doubt it makes a difference.

  Thank you

  Ash

  The beta version is interrupted, and there apparently on your Mac because it is 10.12.1.

  No matter when you want to go to a previous version of the OS, you need to wipe the drive and reinstall. It's not a way to install on a later operating system.

• How can I download new version of iwork

  I need help downloading the new version of iwork with enforcement pages

  Downloading applications is done via the Mac App Store. New versions of iWork applications require Sierra, this is why you must first update your operating system to Sierra if you have not already done so. Upgrade to sierra is also done via the Mac App Store.

  Thus, it would be useful to know what version of Mac OS X you are using and what version of Pages that you use.

• remove the MacOs Sierra and restore to an earlier version of the operating system

  How can I delete Mac OS Sierra and restore my computer to an earlier version? I have the time machine

  You need to wipe your hard drive and restore from a backup that you did before the upgrade.

  OS X El Capitan: revert to a previous version of OS X

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.

• can I update safari to a later version without upgrading the operating system?

  My question asks everything!

  Please provide more information. What OS are you using now and which version of Safari?

• How can I install iOS 7 more later iOS version 5.1.1

  I want to install iOS 7 on my current iphone 4 iOS 5.1.1 version.

  my free space is 1.1 GB available.

  How can I install? pls help.

  An iPhone 4S can only be updated directly to 9.3.5.

  (145095)