See the grouping using API BC recovery products

How can I retrieve products by the group using recovery API BC?

Thanks for the quick response.

It solves the problem by defining condition where 'GroupingDefault': 'true '.

Tags: Business Catalyst

Similar Questions

DN change for GROUPS using API
I have this code I have change the attributes of OID GROUP with:

ModPropertySet m = new ModPropertySet();
Group mygroup;
myGroup = new group (Util.IDTYPE_DN, groupName);
m.addProperty (LDIF. RECORDCHANGE_TYPE_MODDN, "distinguishedname", newDN); _
m.addProperty (LDIF. ATTRIBUTE_CHANGE_TYPE_REPLACE, 'displayname', newDisplayName);
m.addProperty (LDIF. ATTRIBUTE_CHANGE_TYPE_REPLACE, 'description', newDescription);
mygroup.setProperties (dirctx, m);

The piece above the code works fine if I exclude the line with distinguished name or DN.
Otherwise, it returns this exception:
NamingException met in ldapModify [LDAP: error code 65 could not find distinguished name in the list of mandatory or optional attributes]

Interestingly, if I put a bad newDN, such as 'Hello', (not in the form CN =...,...) it says:
NamingException encountered in ldapModify cn = Tester, cn = groups, dc = pooyaco, dc = com: [LDAP: error code 34 - DN syntax]

My question is that if I change DN using APIs like this or not? and how?

Thank you.
Michèle
Change the RDN or DN to a modRDN/modDN operation and not a direct LDAP modify.

For this, you can use the JNDI Java API, see:
http://Java.Sun.com/docs/books/tutorial/JNDI/LDAP/rename.html

ARO
Octavian

HP Envy 15-j139TX: the BIOS using external storage recovery does not work.

My HP Envy 15-j139TX got stuck (frozen) and I force closure by long pressing the power button. I tried to start by pressing the power button, it shows a black screen (display off) and the capslock continues to Flash.

I did research on the problem and discovered that the issue was "the BIOS corruption failure" according to the information on the link below:

http://support.HP.com/us-en/document/c01732674/

I tried to recover the BIOS using an external storage device by following the instructions at the link below:

http://support.HP.com/us-en/document/c02693833

But it did not work. The lights keep flashing. I have my files b.SC. thesis on the computer and their need for pronto. (If not my life is pretty well made)

I also couldn't find the files for version 10 of Windows (64-bit) to my laptop, so I tried with one I downloaded from another site and I got a BIOS of Windows 8.1 HP site.

Is there anyway I can fix it soon or get my files as soon as possible. Help, please!

Have you ever updated the BIOS before?

If you have, you should be able to recover the BIOS using the Windows key + key B method.

All holding the key Windows + B button down, press the power button and wait to see if the laptop responds with a message of recovery of the BIOS on screen.

As my wife continued his mastery, I insisted on his recording of his files periodically to our home network NAS.

You can remove the hard drive and connect it to a desktop computer to get the files from it. You can connect the hard drive to a USB to sata cable to connect it to a laptop. Instructions to access the disk by opening the back door are on page 42 of the maintenance and service guide. The hard drive is part replaceable by the user, so you don't have to worry about voiding the warranty.

http://h10032.www1.HP.com/CTG/manual/c03943414

Your notebook is new enough to have the recovery key enter BIOS update available. Use the F.65 version in the Windows 8.1 driver download section. the softpaq is at the following ADDRESS.

http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69886.exe

You will need at least 256 MB usb key to create a USB rcovery to recover the BIOS with. BIOS update softpaq will offer the opportunity of creating a recovery USB. I used the method on multiple occasions and it worked for me.

Can not see the mouse using projector

When I use my macbook pro 2015, I don't see the cursor of the mouse (I see the effects of it, though) when connected to a projector using an HDMI cable.

There are two ways of 'classics' to connect an external monitor. One is mirrored, the other is "Extended desktop", this picture of the Watch pane arranges extended desktop. Each blue rectangle is an icon for the location of the display on your bench. If you make them slide in the same order as they appear in fact, or remember that the area of the projector is "to the right/top/bottom/left" from the main screen, you can move the mouse across the border between views and drag items to follow correctly.

.

can not see the size / used for desktop HD icon

Then... I managed to get the main drive Macintosh HD appears in the sidebar of Finder and on my desk. So far so good.

And I managed to get the Finder View Options to show the size (and space still free if writable) to the drive and folder of the icons on the desktop. EXCEPT...

... Macintosh HD, disc master system, which is of course that I'm more interested! No text size or free space for that icon.

All recommend for anything - dock icon, mini app, pref setting - which would allow me to see the used/free space on the primary drive at a glance without having to launch the utility disc or cmd - I Info or another tool? I just want to see, in the text or graphic to sectors or at the bar of the gauge form, somewhere on my desk.

Right-click on the icon of the hard disk on your desktop. In the submenu that appears, select "Show view Options".

Then check "view point info.

If this does not work as a first step, relaunch the Finder (-> force quit-> Finder-> stimulus), then try again. You can also start your computer Safe Mode, follow the steps that I have described above and see if it works. If this is the case, restart your computer normally, and then try again.

Get the settings using API
Hi all

I can't get the settings of resource by using APIs. Please find the below code snippet.

tcITResourceInstanceOperationsIntf itOptf = (tcITResourceInstanceOperationsIntf) Platform.getService (tcITResourceInstanceOperationsIntf .class);
Long ITResourceKey = null;
HashMap ITResource = new HashMap();
ITResource.put ("TI Resources.Name", "EBS-HRMS-APPS12");
Logger.Debug ("IT resource parameters set");
String usr = null;
String password = null;
String url = null;
resourceSet tcResultSet = itOptf.findITResourceInstances (ITResource);
for (int i = 0; i < resourceSet.getRowCount (); i ++) {}
resourceSet.goToRow (i);
ITResourceKey = resourceSet.getLongValue ("TI Resources.Key");
}
Logger.Debug ("IT Resource Key:" + ITResourceKey);
tcResultSet resourceParameters = (ITResourceKey) itOptf.getITResourceInstanceParameters;

for (int i = 0; i < resourceParameters.getRowCount (); i ++) {}
resourceParameters.goToRow (i);
If (resourceParameters.getStringValue("IT_Resource_Type_Definition.IT_Resource_Type_Parametr.Field_Name").equals ("JDBC URL")) {}
URL = resourceParameters.getStringValue ("TI Resource.Parameter.Value");
}
ElseIf (resourceParameters.getStringValue("IT_Resource_Type_Definition.IT_Resource_Type_Parametr.Field_Name").equals ("password of Admin")) {}
password = resourceParameters.getStringValue ("TI Resource.Parameter.Value");
} else if (resourceParameters.getStringValue("IT_Resource_Type_Definition.IT_Resource_Type_Parametr.Field_Name").equals ("Admin ID")) {}
usr = resourceParameters.getStringValue ("TI Resource.Parameter.Value");
}
}

Please let me know if something is missing.

Thank you
Bhavana
Use:

Computer SCIENCE resources kind Parameter.Name

Instead of

Contact name the resource Type Definition.IT Type TI Parametr.Field

Satellite L500-1XL: catering on the day of the purchase using HARD drive recovery

Is this possible?

I'm trying to restore my laptop to this day of purchase (only a month today). From what I see on the forum, I'm just in a long line of us discovered that the version of our recovery DVD does not match the product we bought. This is why I would like to restore the 64-bit version (without the option out of order price of recovery media that is shockingly overpriced compared the offer from Microsoft to switch to DVD 64-32 / 32-64 bit more shipping costs).

() This brand of righteous 'aid' is subjective, condescending and above all and most relevant to this forum is useless. "I don't understand why you don't save up to 5,000 copies the day of purchase"... etc. We all make mistakes, and if you have done one, you're going to do on new. It's nice when the person we meet at this time is not pointing the finger of judgement)))

> So, I would restore the 64-bit version (without the option out of order price of recovery media that is shockingly overpriced compared the offer from Microsoft to switch to DVD 64-32 / 32-64 bit more shipping costs).

The laptop came pre-installed with Win 7 64 bit. In addition, you have the recovery disk Toshiba version of Win 7 32 bit.

Please take a look in the user manual.
He says that you can create a recovery in addition to the operating system which was pre-installed disk. means Win 7 64 bit.
There should be a Toshiba Recovery Disk Creator called preinstalled tool. This tool allows to create own 64 bit Windows 7 new recovery disc.
After you create this disk, you can use it to put the laptop in the same State as on the first day of purchase.

Welcome them

8.1 to Windows without the disk key or a recovery product recovery

Hey!

I have a HP 2207sg g6. After upgrading windows 8.1 and a new set of windows drivers AMD won't start anymore.

No not in safe mode, with different starting parameters. Recovery points do not work, restore 3 points (2 automatic 1 critical update (win8.1)), that none works.

I can't or refresh or reset windows, neither can repair windows at startup (it fails as well).

I don't have my win8 product key, because it is not in or on the g6 and I never read it on when the phone still worked.

I tried it reading with the help of several tools 3rd party through the command prompt started from a usb key, what does not work as there are features missing windows.

I can't download a fresh victory .iso windows 8 itself that I don't have the key.

Please help, I don't know what to do more and I need my computer for work.

Thank you!

Hello

The source of the Image Windows 8 system has implemented a download limit, but it will work normally if you keep trying for a few hours. The key will be automatically read from the bios during installation.

I don't am unaware of anyway you can decrypt the encrypted key via the command interface - only in the reading of his entered in the registry.

Unfortunayely, like operating systems, Microsoft or HP will be no trace of this key.

Another option would be to order a set of replacement recovery disks from the link below.

Order HP recovery disks.

If you have a problem with this link, order them directly from HP.

If you live in the United States, contact HP here.

If you are in another part of the world, begin here.

Kind regards

DP - K

doubts in the database using backup controlfile recovery.

Hi gurus,
I have a doubt in database recovery using backup controlfile.
I do not speak of "ORA-01207: file is newer than the control file - old control file.
Here, any of our files archive / redo log have been lost and the problem of lack of update in the control file.
So why open the database in resetlogs option, after recovering the database by using a backup controlfile. ?
Thanks in advance
Mahi

In order to maintain the consistency of the data, the RCS should be the same in all the files of the controlfile & file REDO data current.

By definition when you use 'backup controlfile' there a SNA expired in it.

RESETLOG requires the RCS to 1 in order to get consistency across all files in the database.

CREATE CONTROLFILE fills this new file with the most recent SNA that exist in the data files.

It's just the way Oracle has been implemented.

Is there a way to see the groups of pages within the easier muse?

As you can see below in muse, I have quite a few pages each, and I moved into different groups and stack under each
I was wondering if there is a way to encode the colored boxes, lets say have as a green, red, blue etc box around those grouped, either that or labels.
What it is currently (below)
Change to do something like this (below)

wi1dtree,

Unfortunately, this feature is not available in Muse currently. You are invited to submit this idea in the present in the community of ideas for features in Adobe Muse so it has a better chance of being seen by the developers of Muse and subsequently implemented. Thank you.

List of accounts users (Instances of the Application) using API

Hello
I'm developing an EventHandler that is triggered when a user is changed. Before you run some of its logic on a user, the event handler needs to know if the user has an active AD account. I've been looking through the API to find a way to recover the bodies of Application assigned to a user, but I can't find anything useful. Is the API provides these facilities?
Thank you
-jtellier

ProvisioningService. getAccountsProvisionedToUser (java.lang.String userId)

Take just in the above method

Check a given password against the password using API policy
Gurus,

I have an obligation to check the password given against IOM polci password using the API.

Can you please share some nippet code.
Try this.

String userLogin = "Oracle123";
String newPassword = "Welcome1";

PasswordMgmtService pwdMgmt = (PasswordMgmtService.class) oimClient.getService;
UserManager usrService = oimClient.getService (UserManager.class);
User searchedUser = usrService.getDetails (userLogin, null, true);

ValidationResult validationResult = pwdMgmt.validatePasswordAgainstPolicy (newPassword.toCharArray (), userLogin, searchedUser.getLocale ());

If (validationResult.isPasswordValid ())
System.out.println ("valid password");
on the other
System.out.println ("password not valid");

How the group using SQL for the desired output.

Hi all

I am currently using oracle 10.2.0.4.0

Create a table script:

CREATE TABLE FORTEST
( gpno VARCHAR2(10 BYTE),
  classnumber  VARCHAR2(10 byte),
  age_min NUMBER,
  age_max NUMBER,
  amount NUMBER)

INSERT statement:

insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 01,0,29,1) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 01,30,35,2) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 01,36,40,3) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 02,0,29,1) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 02,30,35,2) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 02,36,40,5) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 03,0,29,1) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 03,30,35,2) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G123' , 03,36,40,3) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G124' , 01,0,29,1) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G124' , 01,30,35,2) 
insert into fortest  (GPNO,classnumber,age_min,age_max,amount) values
('G124' , 01,36,40,3)

power required:

gpno    classnumber    age_min    age_max    amount
G123    1,3                0        29        1
G123    1,3                30       35        2
G123    1,3                36       40        3
G123    2                  0        29        1
G123    2                  30       35        2
G123    2                  36       40        5
G124    1                  0        29        1
G124    1                  30       35        2
G124    1                  36       40        3

as for gpno g123, classnumber 1 and 3, the rates are the same in all the age_min and age_max they need to be grouped.
even if gpno 123 classnumber 2 has the same rates as the classesnumber 1 and 3 for the age groups 0 to 29 and 30 to 35,
rates are different for ages 36 to 40. so it should not be placed together. How can I do this in SQL

any help is appreciated.

Thanks in advance.

Hello

Thorny problem!

Unfortunately, LISTAGG was created to the Oracle 11.2. About half of the complexity here is the aggregation of chain, i.e. forming the list of the classnumbers, as '1.3', using only functions available in Oracle 10.2.

Here's a solution:

WITH     got_gpno_classnumber_cnt   AS
(
     SELECT     gpno, classnumber, age_min, age_max, amount
     ,     COUNT (*) OVER ( PARTITION BY  gpno
                                  ,            classnumber
                      )   AS gpno_classnumber_cnt
     FROM    fortest
--     WHERE     ...     -- If you need any filtering, this is where it goes
)
,     pairs          AS
(
     SELECT    a.gpno
     ,       a.classnumber
     ,       MIN (b.classnumber)
                OVER ( PARTITION BY  a.gpno
                          ,                    a.classnumber
                  )     AS super_classnumber
     FROM       got_gpno_classnumber_cnt  a
     JOIN       got_gpno_classnumber_cnt  b  ON   a.gpno     = b.gpno
                                  AND  a.age_min     = b.age_min
                                AND  a.age_max     = b.age_max
                                AND  a.amount     = b.amount
                                AND  a.gpno_classnumber_cnt
                                        = b.gpno_classnumber_cnt
     GROUP BY  a.gpno
     ,            a.classnumber
     ,       b.classnumber
     HAVING       COUNT (*)     = MIN (a.gpno_classnumber_cnt)
)
,     got_rnk          AS
(
     SELECT DISTINCT
             gpno, classnumber, super_classnumber
     ,     DENSE_RANK () OVER ( PARTITION BY  gpno
                               ,                    super_classnumber
                               ORDER BY          classnumber
                       )         AS rnk
     FROM    pairs
)
,     got_classnumbers     AS
(
     SELECT     gpno, classnumber, super_classnumber
     ,      SUBSTR ( SYS_CONNECT_BY_PATH (classnumber, ',')
                   , 2
                 )     AS classnumbers
     FROM     got_rnk
     WHERE     CONNECT_BY_ISLEAF = 1
     START WITH     rnk             = 1
     CONNECT BY     rnk             = PRIOR rnk + 1
          AND     gpno             = PRIOR gpno
          AND     super_classnumber  = PRIOR super_classnumber
)
SELECT DISTINCT
       g.gpno
,       c.classnumbers
,       g.age_min
,       g.age_max
,       g.amount
FROM       got_gpno_classnumber_cnt  g
JOIN       got_classnumbers         c  ON   c.gpno        = g.gpno
                             AND  c.classnumber  = g.classnumber
ORDER BY  g.gpno
,            c.classnumbers
;

Out (just as you requested):

GPNO       CLASSNUMBERS       AGE_MIN    AGE_MAX     AMOUNT
---------- --------------- ---------- ---------- ----------
G123       1,3                      0         29          1
G123       1,3                     30         35          2
G123       1,3                     36         40          3
G123       2                        0         29          1
G123       2                       30         35          2
G123       2                       36         40          5
G124       1                        0         29          1
G124       1                       30         35          2
G124       1                       36         40          3

Need help with deprovision as a single resource to the user using API profile
Hello
I need to write a little code, where I can layout only one resource profile of the user via the API of the IOM. Please help me to start coding.

Thank you
Kalpana.
Change your code to do this

String oiuKey = resultset.getStringValue ("User-Object Instance to User.Key");

You must pass the oiuKey method revokeObject no Object Key

See more details here revokeObject method [IOM] - howto?

Change the password using API web services?

I can create and update users using Adobe Connect API web services, but how do I change the password of a user?
I use the API "principal-update" that has a setting of password, but according to the documentation, it is only used for new users... not the users.
So exactly how to change user password using the web services?

Hello

There is an API that can be used to change the password: user-update - pwd

Format of the API :

http://server_name/API/XML?action=user-update-pwd&user-ID=integer&password-old=string&pass = word string - string verify password = & session = BreezeSeesionCookieValue.

Hope this helps!

Thank you

Nikhil

See the grouping using API BC recovery products

Similar Questions

ProvisioningService. getAccountsProvisionedToUser (java.lang.String userId)

Maybe you are looking for