8.1 to Windows without the disk key or a recovery product recovery

Similar Questions

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• Mouse and multimedia keys does not work without the fn key

  Lenovo G500

  model without 20236

  Windows 7 sp1

  the mouse and the multimedia keys does not work without the fn key. Help, please

  [Original title: Lenovo g 500]

  Hello

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/ I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• If I have to start windows from the disk to do a repair, I lose all my data backed up?

  Computer will not complete boot. Happens to the black screen with green progress bar and stay there. The computer invites me to start from the windows disk. However, if I have to start windows from the disk to do a repair, I lose all my data backed up? Thank you.

  Computer will not complete boot. Happens to the black screen with green progress bar and stay there. The computer invites me to start from the windows disk. However, if I have to start windows from the disk to do a repair, I lose all my data backed up? Thank you.

  Hello

  in Vista, if using a Microsoft Vista DVD(NOT a Manufacturers recovery Disk), the "boot" disk repair process, you ask about, it's only a "Startup Repair", not a repair of the operating system installation; population

  You must have an operational Vista operating system to do a repair installation of the files using a Microsoft DVD of Vista system

  BUT, if the use and start from a manufacturers recovery disk, which guest from the disk is likely to reinstall the OS and lose all your data

  Please explain with more information

• without the license key can we get all the features of the ips

  Hi all I have a sensor ips 4215. I don't have the installed license key is to have the 5.0.1 image inside. Thus, it comes with the default signature. I want to know I will get all the features of IP 4215 even without the license key. can u pls someone help me with that.

  concerning

  Assane

  Yes, you will get all the features of IPS sensor - its fully functional devices, you don't only have latest signatures (against the latest attacks - but anyway IPS uses also heuristic analysis to detect attacks)... and 5.0.1 contains a lot of signatures in order to have the right IPS device

  Signatures can be downloaded from EAC, if you smartnet - location even agreement as with IOS... :))

  M.

  Hope that helps the rate

• My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

  As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

• I bought windows 8 (blue cover) no license and the disk key is writtin NOT for RESALE. It comes

  I bought windows 8 (blue cover) on eBay at the price of 50 euros, and when I tried to install it, I discovered it's a backup disk and it comes without a license key.

  Also on the center of the disc is written (NOT for RESALE).

  The question is the seller have the right to sell an only not for resale Microsoft product?

  Thank you

  I bought windows 8 (blue cover) on eBay at the price of 50 euros, and when I tried to install it, I discovered it's a backup disk and it comes without a license key.

  Also on the center of the disc is written (NOT for RESALE).

  The question is the seller have the right to sell an only not for resale Microsoft product?

  Thank you

  No, it doesn't have the right to sell you software NFR and if he hid this information, then its wrong.

  Your best decision is to try to get the refund by the dealer, then report him. If it doesn't, don't threaten them. Simply report them to ebay and report to Microsoft Piracy.

  Make sure that you have received as proof of purchase.

  Replica, counterfeit and unauthorized copies policy objects

  Statement of Microsoft piracy:

  Protect yourself against piracy

• Re-install Windows without the original disk Windows 8.1

  Hello

  I use windows 8.1 right now, I need to reinstall the windows and doing it is another. I don't have the original windows disc. Is it possible to reinstall without the disc?

  In this case, you can reinstall Windows 8.1 by downloading and using ISO images from the link below provided that you already have the product key for your version of Windows:
  https://www.Microsoft.com/en-us/software-download/windows8ISO

  Once you have downloaded ISO image and created the installation disc, you can reinstall Windows following the instructions mentioned on the link below:
  http://Windows.Microsoft.com/en-us/Windows-8/clean-install

  Hope this will help you.

• How to validate windows after the disk crash hard with or without pay for a new disk

  Hello

  Thanks for any help. My hard drive crashed after it overheated. Each attempt I used to reinstall or use a backup version failed because my hard drive could not be found. This disc that came with my computer was so useless. I had to go to a computer repair shop & buy a new CD with Windows 7 on their part. Now, when asked to reactivate it, it says my code is not genuine and is not even from America. I read in another message that a person would buy a CD to their computer manufacturer. I do now? I have the dang code for my original windows installation. It is right on the side of my computer Tower, but obviously it does not work as disc of the repair shop has a different code.

  Now that my computer is totally fixed, is it possible for me to try and reinstall my windows with the repair disc supplied with my computer when I bought it? Alternatively, I can reset my computer to its factory installation? Are these files on my computer since I have used another drive? I'm guessing that probably not. Thanks again for any help.

  Statistics of the computer:

  Windows 7 Home Premium 64-bit

  Hard drive: 1 TB

  Memory: 3 GB

  Processor Intel Pentium E58

  I'm pretty computer illiterate, so if you tell me to go to a certain place and type a number of keys, I won't be able to understand it, even with the simplest explanations... I'm sorry.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Is it possible to reinstall Windows without a disk?

  original title: reinstalling Windows without a login

  Hi all

  My brother has changed his password on his computer (Windows Vista Home Basic) and now he don't remember it. He didn't have a password reset disk.

  We tried to make a password reset disk to another computer and try to use it on his, but he failed.

  I read that there is also an administrator account on the computer in safe mode. This has been proven false on his computer, as well.

  Finally I found that if you re-install Windows then it would work. This has not been tried still for reasons given below, hense why I ask here.

  We do not have a Basic Windows installation disc, because we have not improved. It's a phone, too good.

  Is it possible to re - install Windows another way, and if so, how do you do that?

  Please keep in mind that we do NOT have the installation disc, and we can NOT connect to any.

  See you soon

  Luke

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• In ultimate windows 7, when I want to paste or create a file on USB, windows says: the disk is write protected. ?

  in Window 7 Ultimate. When I want to create a file or paste a file copied to a USB port or flash memory, windows cannot perform this action and the message: the disk is write protected.but when I used the same USB Win XP, disc is OK and not write-protected.
  I tried this question on several USB key, but the result was the same.
  anydody can help me?

  Hi Saleh2506,

  You can try and remove the disc, remove the write protection (by reversing a tab on the disk), and then try again.

  If you do not have the valve on the USB, try the following steps to resolve the problem:

  1. Click Start , type regedit.exe and press ENTER.

  2. navigate to the following location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrrentControlSet\Control

   

  3. control with the right mouse button and select new and key.

  4. call it as StorageDevicePolicies.

  5. click on StorageDevicePolicies and on the right pan right click and select new > DWORD and name it as WriteProtect.

  6 double-click it and set its value to 0.

  This will disable the write protection on USB/flash drives.

  Restart your computer and check to see if that fixes the problem.

  Important The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  I hope this helps!

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Satellite R630 were delivered without the disks

  Hi guys,.

  I bought a laptop R630 and it came with Windows 7 pre-installed but no CD / DVD installation.

  I wonder what what do I do if I have to re - install a new copy of Windows 7 after a year or more.

  Where can I get the installation CD of?

  Hello

  I recommend reading the manual first.

  Additional I recommend checking a thread here in the forum; in particular the Toshiba product recovery forum.

  The disks were not provided because you can create this disk using Toshiba reocveyr disk creator.

  Welcome them

• Satellite Pro L40 - after upgrade to Windows 7, the FN keys do not work

  Hello world

  I have a Satellite Pro L40 PSL4BE and have just upgraded to Windows 7. Since the upgrade I can no longer use the function key and the top and down arrows to control the volume. Keys F6 F7 & still control the brightness so I don't know the function key still works.

  Anyone know if it is a driver problem or nobody knows how to solve this problem?

  Thank you

  Drew.

  Hello

  You need to install the package of value added for Satellite Pro L40. This package contains all the necessary drivers for the FN keys. Then please install or update VAP if you have already installed an earlier version.
  Here you can download: http://eu.computers.toshiba-europe.com > support & downloads > download drivers

  Can you confirm that FN keys work with installed VAP?

• Reinstalling Windows without installation disks

  Let me clarify some things that I think are made:

  Laptop = ideapad z575 which is a windows 7 64 bit computer.

  Windows wouldn't boot because it has an error since avg and update wondows - avg seem to be ashamed that their driver is the last show at startup but remove avg then showed another driver and it all points to a depth of problem.
  In short, I feel that a reinstallation is the best way forward.

  I saved my data sisters so happy to do a quick format and reinstall of windows 7 - have the serial number sticker, but no disk I do not think that it shipped in all.

  I didn't modify all partitions, but using a utility disk in the back that I was able to access it via the standard boot drive I can put another active partition... now to return back I had to create a bootable utility that I made from USB, it also allows me to inspect the readers through a windows interface.

  So I am here and able to do a lot in the back through my USB. I saw and was able to run a recovery program that is located on one of the partitions. But he told me that something was friends with readers and I think it's because of my defining a different partition as the only active.

  What is the next best step for me it feels exaggerated do not use partition lenovo gave to reinstall windows, hoping I wouldn't need browse and find/download all the drivers, etc... and not to mention updates of bios etc...

  I can say that I have the following discs and back access and access through GUI.

  When I say access via the GUI I found that I was able to do this system revoery options screen when he says click to search the drivers an interface will appear and where I can the eyebrows of all partitions and USB - which was pretty cool. The button says "Load Drivers" and from there, I can choose the partition and try and run one touch back.

  When he first boot from USB it looks like as it is by default and selects a Boot called drive (X and the default folder is the Windows/System32 folder.)

  Here are the disks or partitions I can see and explore

  Lenovo (C 27.5 Free GB GB 28.9 contains just request files and drivers.)

  Local disk (E it looks like there's a Windows installation on it that I can see my sistsers files in the my documents (I got these by using XCOPY to get the complete recursive directory and do be careful if you use just "copy" as it will ignore folders and files inside!)) For me, it's the normal bootable disc and one that is broken.
  349 GB free of 421 GB so this seems to confirm that it is the main trunk and use the partition.

  Local disk (D only 166 199MB MB no said no files and folders at least since the GUI - perhaps back can show me something...)

  Start (X 29.1 MB of free space of 31.5 MB I don't think it's my USB (NOT confirmed) the last modified date is 2009! he seems to have a windows installation - is possible to reinstall from that?) I tried to click on a setup.exe found here but it does not work via the GUI as it comes to find specific drivers is not not a general file Explorer.

  I have 2 drives USB also visible to help me. I got the above files to another on the ERD. And the 3rd is the CD. If these are known as CDROM (F, Reapir disk (G: I did that) and 32 GB Flash (H)

  Maybe I need to burn an iso install wondows in the latter. Who can be a last resort.

  What is perhaps a few right steps to take right now. I think I should be able to change my active partition and get a contact working again by reversing what I was doing back disk partition - don't remember the name... a few trial and error required.

  But I hope that with this info I can get my sisters laptop that works again. I think also that if I took it to a local shop they will simply be to format and reinstall windows 7 and drivers do not care to take the time to maybe get to a situation of factory. It is because the baisc economy. I don't want to go that route because I know I can do what I want to just make the best way.

  Knew nothing about this function - will keep in mind for the next window of time slows down or does not start - throw his toys out of the pram etc... suffering from windows computer slow? You are not alone

  In any case, I think I've sorted it. Hope that C is not too fragmented because I chose to not be complicated with a format and keep the original scores. In this way its just easier.

  Wifi that I had remembered to disable in the BIOS.

  If you want help about this, then please contact on twitter @cambsdigital

• How do I Fix error code 43 CD. Windows disconnected the disk do not know how to reconnect.

  My Pavilion g7us Notebook Pcs Cd-Rom Drive showed a 43 error code and my computer has disconnected the Cd-Rom drive, and he said: it will not reinstall because there is a problem with the drive, how to fix my cd-rom so that I can start my backups and use my Dvd Player and burner.

  In addition, depending on the operating system, try following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.