See the Message of Notification area using javascript...

Similar Questions

• I'm working on the end of Vista this message comes when I tried to download creative cloud: "the operating system you are using is no longer supported by InDesign.» See you to the minimum required pour full list of

  I work under Vista and this message comes when I tried to download creative cloud: "the operating system you are using is no longer supported by InDesign.» Refer to the minimum requirements for a complete list of the supported platforms. "How can I do install creative cloud and use Indesign?

  Thank you

  Hi Laurent,.

  Please refer to the data sheet below:

  System requirements | Creative cloud

  Kind regards

  Sheena

• Try to download the trial and the system says "you are using an operating system that is no longer compatible with Photoshop. See system requirements for a complete list of the supported platforms. What can I do?

  Hi, I am looking to download the trial and the system says "you are using an operating system that is no longer compatible with Photoshop. See system requirements for a complete list of the supported platforms. What can I do?

  My laptop is a MAC Pro

  Well, what IS your version of operating system?

  MINIMUM requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

• Hello - ideas as to the "cloud" icon why opens as a blank white screen - I can see the craft, but is not useful, cannot open apps - see if there are dates, add to my plan (to acquire more apps)-

  Hello - ideas as to the "cloud" icon why opens as a blank white screen - I can see the craft, but is not useful, cannot open apps - see if there are dates, add to my plan (to acquire more apps)-

  White screen

  https://forums.Adobe.com/thread/1249756

• Please tell where I can see the message that are available in the TransportServlet

  My Trading partner sends the messages to the TransportServlet and the away end it says message is delivered. Please tell me where I can check messages or do I need something to save installation messages.

  Any message that comes to B2B trading partner, will record at wiremessage. Please see the message from the wire report. If the message is processed successfully, then will be all Business, message App Message entries

• Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.

  Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.  This happened for several months, but I just ignored him.  Don't know if it's related, but a user cannot disconnect without pressing the Windows key and the "L" key at the same time.

  Tonight I ran a registry repair program, and it fixed a lot of errors.  But, always, the message came after a reboot.  I don't know what it is, what it does or how to remedy the situation. Can anyone help?

  Thank you!

  You may have damaged even more by running a registry cleaner for Windows. The best registry cleaners are snake oil, and at worst they will damage MS Office and sometimes Windows itself. Details:

  http://aumha.NET/viewtopic.php?t=28099

  For the problem, Googling for this file appears your post. When you get no hits for a filename on Google, chances are high that it is a malicious program file. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• My MSN messenger no longer records the message history. It used to, but have no more. Why not?

  My MSN messenger no longer records the message history. It used to, but have no more. Why not?

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.

  See you soon.

  Mick Murphy - Microsoft partner

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• Impossible to make it appear in the volume icon notification area. Have you tried all the procedures of sugested suggested on Microsoft Help.

  Impossible to make it appear in the volume icon notification area.  Have you tried all the procedures of sugested suggested on Microsoft Help.

  Try this:

  In the run box type: regedit, click OK
  Navigate to:

  HKEY_CURRENT_USER
  \SOFTWARE
  \Microsoft
  \Windows
  \CurrentVersion
  \Explorer
  \TrayNotify

  Right-click on icon stream, click on remove, restart your computer.
  The icon stream all will return.
  This works on most of the configurations.
  You may need to do a few times.

• Is it possible to get the appid, pageid and sessionid using javascript?

  Hello world

  I need to get the appid, pageid, and sessionid using javascript, is it possible to do this?

  Hello

  If your JavaScript is in file:

  $v ("pFlowId") = application id

  $v ("pFlowStepId") = the page id

  $v ("pInstance") = session id

  Kind regards

  Jari

• How do I see the message I sent a file?

  When I send files, the screen comes up with regard to whom you send the file to and has a box to send a message... after it was sent, you can view this message?

  Hi rscac,

  If you click on the "eye" on the far right of the file tab files sent to https://cloud.acrobat.com/and click on transfer, you can see the message that you entered.

  Best,

  Sara