Select the flashback in my database from backup

Similar Questions

• Creating a database from backups of the production test

  Hello Experts,
  
  I'm a newbie with a lot new in Oracle. I got the backup inc0 (which includes even backup controlfile) (PROD) production base taken by RMAN and asked to create a new test database (TEST) by using the backup. Can someone please give me the steps on how to restore and create the new database?
  
  The 10.2.0.4 basic version
  I am aware of the concept of duplicated with RMAN database, but I was asked to do not connect to the target (PROD) database while duplicating. So, I need to create the test database using the prod database backup without being connected to the PROD database. Please guide me.

  Refer
  http://arjudba.blogspot.in/2008/05/restore-and-recover-database-to-new.html
  RMAN restore database from another backup of the different database name

  When you perform a restore using backup of the production database, the db_name would be same on the auxiliary database. Once you restore and recover the database in your test server, you can change the prod db_name to test by recreating the controlfile

• Bounce the database from backup

  Hello
  
  I use oracle10g with database pending. Here is the version of database.
  
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - 64bi
  PL/SQL version 10.2.0.3.0 - Production
  CORE Production 10.2.0.3.0
  AMT for Linux: release 10.2.0.3.0 - Production
  NLSRTL Version 10.2.0.3.0 - Production
  
  Now, I want to increase the number of processes in the primary database. Primary needs downtime. But in this case, do I bounce the day before?
  
  Let me ask my questions here.
  
  1 should I I bounce the day before to this scenario?
  
  2 here are the commands and the sequence of steps to stop and start the database. Please correct me if I'm wrong...
  
  2 (a) stop of the standby database first. (run this command at the secondary level)
  
  Connect / as sysdba
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  SQL > shutdown immediate
  
  
  2 (b) primary stop (run this command in the primary)
  
  SQL > ALTER SYSTEM SET PROCESSES = 999 SOPE = spfile;
  SQL > SHUTDOWN IMMEDIATE
  
  2 c) primary startup
  
  SQL > STARTUP
  
  beginning 2d) the secondary database
  
  Connect / as sysdba
  startup nomount
  ALTER DATABASE MOUNT STANDBY DATABASE;
  ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.
  
  
  (3) after starting the database, how can I make sure, primary is on sale the archivelog in high school?
  
  
  
  Any help is appreciated...

  The backup database can be upward as you restart the primary database - which is not a problem.

  Just compare V$ MANAGED_STANDBY standby with V$ log primary: sequence # process MRP with APPLYING_LOG status must be equal or close to the sequence # who is CURRENT in V$ LOG of primary.

  You must also set the parameter to the eve with scope database = spfile. So after a failover or a passage, the setting is the same on your new primary database.

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• RMAN Duplicate Database from backups without a target without a catalog.

  I apologize if this has been posted before, although I couldn't find in the forums.
  We are currently on 11 GR 1 matter of database and currently implementing RMAN backup and restore.
  We have databases of test periodically refresh us sources of production for our clients on a regular basis (exp / imp currently). As with general practice, these test reside on a different server.
  I have been through a lot of documentation on RMAN and I have several questions regarding the creation of a database of duplicate backup copies (backup of level 0 currently) without a target database and catalogue (No. Duplication Active)
  
  We have Oralce files managed, implemented.
  
  (1) RMAN requires a database for replication?
  The reason I ask this question, it is only
  http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270.PDF Chapter 23, 23-13/23-14. Alll indicate that need a target.
  
  (2) if there is No target, then setting SPFILE used the backup SpFILE?
  
  (3) what are recommended approaches.
  
  (4) what is the command for the simple reproduction of backup without purpose and without catalog
  
  Thank you

  'Target-free' RMAN duplication is a feature of 11 GR 2:

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17128/Chapter1.htm#FEATURENO06994

• Cannot open the database from backup

  Hello
  
  I use Oracle Database 10 g on Lunix and have a physical database ensures.
  
  I was check on the primary it shows
  
  Primary
  
  SQL > archive logs list;
  Database log mode Archive Mode
  Active AutoArchive
  Archive destination /database/oraapps/PROD/db/tech_st/10.2.0/dbs/arch
  More old sequence of journal online 568
  Log sequence archive 569
  Current log sequence 569
  
  
  Sleep mode
  
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Archive destination /database/oraapps/PROD/db/tech_st/10.2.0/dbs/arch
  More old sequence of journal online 568
  Log sequence to archive 0
  Current log sequence 569
  
  Whenever I run
  
  alter system switch logfile, that is happening, but when I try to open the database of Eve I get error like below;
  
  SQL > ALTER DATABASE OPEN;
  ALTER DATABASE OPEN
  *+
  ERROR on line 1:
  ORA-16004: backup database requires recovery
  ORA-01152: 1 no file has been restored from a sufficiently old backup
  ORA-01110: data file 1: ' / database/oraapps/PROD/db/apps_st/dddd/system01.dbf'
  
  Please advice.
  
  Thank you.
  
  Published by: user8676543 on October 16, 2012 03:55

  recreate your Eve yet once, you did something wrong in creation.

  http://oracleinstance.blogspot.com/2010/01/step-by-step-document-for-creating.html

• The lines where him deleted using the databases from backup triggers

  Hi all

  1) CREATE TABLE student1

    (

       no    NUMBER,

       name  VARCHAR2(10 byte),

       marks NUMBER

    )

  
  

  I inserted the 10 records (1,2,3...10)

  
  

  (2) Created student1_history Table create table student1_history in select * from student1.

  (3) removal of Student 1

  When n = 10

  4) CREATE OR replace TRIGGER after_student1

    AFTER DELETE ON student1

    FOR EACH ROW

  START

  INSERT IN student1_history

                  (no,

                   name ,

                   marks )

      VALUES      (:old. no ,

                   :old . name ,

                   :old . brands of );

  END ;

  
  

  (5) select * from student1_history

  no row is returned.

  
  

  I have 2 tables as indicated above, I deleted a row in the table of Student 1 and I compile the trigger, I want store the deleted row in the Table student1_history

  
  

  Can you please help
  

  
  

  Hello

  Have you tried using the delete trigger BEFORE? Please try if you do not have

  Warm greetings,

  Jjun

• Select the default tray when printing from MS Word or any other application HP OfficeJet 8610

  Hello

  We have HP OfficeJet 8610 with additional tray. So, we have Tray1 and bac2. That's what I read in the specs of the printer about how we can use the bins:

  • Loaded into all of the paper trays and use paper from a tray if the other tray is empty
  • Loaded into all trays and paper of one of the bins first use
  • Be able to choose plain paper and another type of paper that you use occasionally

  My question is:

  Let's say that we have put the tray 2 as the default tray.

  In MS Word or any other application in layout, you can define special tray (say 1 tray) paper source. This means that the document should be printed on paper from the selected tray (Tray 1). But in our case, the document is always printed using paper from the default tray (tray 2).

  Could you please confirm that this is the expected behavior?

  Thank you so much, Ana.

  Hi @AnaGligorijevic,

  I understand that you want to be able to print the same document at different trays and change the setting via the Word software. This printer is not able to change the settings of the tray for different pages in the same document to multiple pages.

  To work around this problem, you can use the parameter to "print pages." "Select it print pages selected, then for other pages ' print pages" yet once and then change the parameters of the status bar of the application.

  The application, you can change the settings of the tray for 1 page or a multiple page document. But it will print all pages of the specified tray.

  Hope that makes sense. Thank you!

• How can blackBerry smartphones, I open the file on my computer from backup

  Outlook 2007 synchronization with bold 9780 no, y at - it another software, we can open the back contacts of my version of bb upfile 9780 6.1 on the pc. kindly Guide

  Yes, you can you please use the following links to download software

  Sound is ABC Amber Blackberry Converter and is not free

  http://www.downloadatoz.com/ABC-amber-BlackBerry-converter/open-BlackBerry-backup-IPD-file-on-PC.htm...

  His Magic Berry is and its free to use

  http://www.AddictiveTips.com/Windows-tips/magicberry-extract-content-from-Backberry-IPD-backup-file/

  It will solve your problem

  Make sure any other things please lte me know

• Restoring a database from backup

  Hi guys,.
  
  
  If I'm trying to restore my oracle 9i database (250 gb) with the backup of the BCV, how long can be need to restore me with BCV.
  
  After that, I want to update my database to 11g. WHT will be my down time for these two tasks.

  Hello

  Make a copy of the DB and upgrade test and check the time it takes, and verify that the upgrade was successful

  -Pavan Kumar N
  Oracle 9i / 10g - OCP
  http://oracleinternals.blogspot.com/

• Select the Flashback

  Hello
  
  
  first of all

  Happy new year to one and all 

  I use 10.2.0.1.0 oracle. I dropped a table by mistake and need to return to the table. How can I activate the Flash back to my a/c.

  804282 wrote:

  I use 10.2.0.1.0 oracle. I dropped a table by mistake and need to return to the table.

  Question:

  FLASHBACK TABLE table_name to before drop;

  to recover deleted table.

  SY.

• Windows restarts when I select the option to remove the program from the Control Panel files

  Windows 7 Home Premium 64-bit installed. System of the down stops and restarts whenever I select the option to remove programs from the control panel. First of all, the problem occurred when I upgraded the version of iTunes. Restoration has solved the problem. Same thing happened when I upgraded my version of PowerDVD. Restored again to solve the problem. Just installed Office 2010 and the problem came back. I don't seem to be able to install software without this problem. Any help gratefully received.

  Hi Rugger,

  Welcome to the community Microsoft and thanks for posting the question.

  This issue could be happen if system files have been corrupted or any third party application conflicts.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  I suggest you perform a SFC Scan and check if it helps.

  Steps to perform a scan SFC:

  a. click Start, click principally made programs, Accessories, and open the command prompt.

  b. type the following command and press ENTER:

  sfc/scannow

  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]

  Once the scan is finished, close the command prompt window, restart the computer and check.

  Reference: http://support.microsoft.com/kb/929833

  Method 2:

  I suggest you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Windows 7 for Lenovo G50-70 - the computer will not boot from the CD

  Hello world

  I hope that someone here will be able to help

  I bought a new laptop with Windows 8.1. I want to install Windows 7 on that I know well because I can't use the new windows. I changed the settings in the BIOS to get the machine to boot from the CD, but it won't be fair. I also tried to restore the system to boot from the CD, but it installs just the Windows pre-installed, new instead. Also, I can't access the CD from the drive while all my other computers are capable of (what is strange)

  Can someone help, please?

  See you soon

  PS. : I can turn on the computer through the small "boot botton" on the side and select the DVD drive to boot from. But this is not followed by the message "Press any key to boot from CD" and the computer starts just W8 yet;

  I contacted customer service and followed your advice. They refused to help him on the ground that there nothing wrong with the machine in their opinion, and since I wanted to change operating system. All preinstalled spyprogrammes Lenovo has been erased with this downgrade. So far, I've owned a laptop computer brand new and expensive for a year I used only to waste my time, trying to make it work, that was not why I bought it in the first place. What a RIP-OFF!

• by selecting the max value of the rank function.

  Hi I have the following querry on the table use:
  
  Select user_id, e-mail,
  Rank() (PARTITION BY Email order by user_id) AS rank_l
  of users_tab;
  
  It gives me the result as follows:
  user_id E-mail rank_l
  1 1 [email protected]
  2 2 [email protected]
  3 [email protected] 1
  4 [email protected] 2
  5 [email protected] 1
  6 [email protected] 2
  7 [email protected] 3
  
  I need to select the user rank max id from the result set.
  in this case, the result should I get is:
  user_id E-mail rank_l
  2 2 [email protected]
  4 [email protected] 2
  7 [email protected] 3
  
  
  Help, please?

  Hello

  The "with" clause is only for the purppose test, use your own data. The solution is in the OLAP NTH_value function.

  select
  distinct
  nth_value(user_id,1) over (partition by email order by user_id desc) as id,
  nth_value(email,1) over (partition by email order by user_id  desc) as email
  from users_tab
  order by 1
  

  It works with your own data?

  Kind regards.

• ORA-38760: this database instance could not turn on the flashback database

  Hi guys

  Without knowing it, I deleted all the files in the directory "fra" where "flashback" folder was there because of space issues. Now am facing the error.

  It's my practical database.

  SQL > startup

  ORACLE instance started.

  Total System Global Area 608174080 bytes

  Bytes of size 1268920 fixed

  184550216 variable size bytes

  419430400 of database buffers bytes

  Redo buffers 2924544 bytes

  Mounted database.

  ORA-38760: this database instance could not turn on the flashback database

  SQL > alter flashback database;

  Database altered.

  SQL > SHUTDOWN IMMEDIATE;

  SQL > STARTUP MOUNT

  SQL > select flashback_on from database v$.

  FLASHBACK_ON

  ------------------

  RESTORE POINT ONLY

  Am not able to extinguish the flame.

  SQL > select * from v$ restore_point;

  Select * from v$ restore_point

  *

  ERROR on line 1:

  ORA-38701: Flashback database log 1 seq 1 wire 1:

  "/ u01/fra/PROD/flashback/o1_mf_c1l5n3lq_.flb".

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select flashback_on from database v$.

  FLASHBACK_ON

  ------------------

  RESTORE POINT ONLY

  I also tried to create a restore point and the flashback there.

  SQL > create restore point guaranteed rspt1 flashback database;

  Restore point created.

  SQL > select * from v$ restore_point;

  Select * from v$ restore_point

  *

  ERROR on line 1:

  ORA-00600: internal error code, arguments: [krfg_get_keepseq_2], [1], [0], [0,]

  [0], [0], [0], [0]

  SQL > flashback data base to restore the point rspt1;

  flashback database to restore the rspt1 point

  *

  ERROR on line 1:

  ORA-38729: not enough flashback database data log do FLASHBACK.

  Please help me in this regard.

  Alert log file:

  ...

  ...

  ...

  Mount of redo thread 1, with mount id 305866694

  Sun 25 Oct 10:13:30 2015

  Bytes allocated of 3981204 in the shared pool for the generation of flashback buffer

  From RVWR background process

  RVWR started with pid = 16, OS id = 15486

  Sun 25 Oct 10:13:30 2015

  Errors in the /u01/oracle/product/10.2.0/db_1/admin/prod/bdump/prod_rvwr_15486.trc file:

  ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  Sun 25 Oct 10:13:30 2015

  Database mounted in exclusive Mode

  Completed: ALTER DATABASE MOUNT

  Sun 25 Oct 10:13:30 2015

  ALTER DATABASE OPEN

  ORA-38760 marked during: ALTER DATABASE OPEN...

  Trace file:

  ...

  ...

  ...

  :() 2015-10-25 10:13:30.087 SERVICE NAME

  SESSION ID: (156.1) 2015-10-25 10:13:30.087

  ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  1. Thank you.

  you experience serious problem... because usually it works very well.

  Try the following:

  SQL > shutdown immediate;

  SQL > bootable media.

  SQL > alter flashback database;

  SQL > alter database backup controlfile to trace noresetlogs;

  SQL > shutdown immediate;

  go to the trace file generated from running (alter database backup controlfile to trace noresetlogs ;)

  location of the trace file is located in the query:

  SQL > select * from v$ diag_info;

  It will contain the script with the SQL commands, you can rename the file with the extension ".sql".

  SQL > startup nomount

  SQL > @trace_file. SQL

  SQL > restore database;

  SQL > alter database open;

  So basically you are going to recreate the files of control again...

• Files without a NAME during the Flashback Database

  Hi all

  Why, in flashback, database, retrieve a tablespace has dropped the datafile (s) consisting of within table get renamed to UNNAMEDnnn? I was going through some examples on the internet but did not find any concrete reason as to why this happens during the flashback recovery. If the tablespace can be recreated during the process, why not data files that compose?

  Could someone help me please in my understanding.

  Thank you.

  Prithwish Adhikari wrote:

  Hello

  I was talking about the flashback database to retrieve a tablespace has fallen. Please find below the link

  http://www.DBA-Oracle.com/t_rman_159_restore_dropped_tablespace.htm

  My question is

  "

  flashback

  database to the SNA 460217.

  database of flashback to the SNA 460217

  *

  ERROR on line 1:

  ORA-38795: WARNING: flashback has managed but open resetlogs would get error

  below

  ORA-01245: offline file 5 will be lost if resetlogs is done

  ORA-01111: name for the data file 5 is unknown - rename it to the correct file

  ORA-01110: data file 5: ' / u01/oracle/product/10.2.0/db_1/dbs/UNNAMED00005'

  "

  Why, in flashback, database, the data file associated with the storage space gets renamed to unnamed?

  Thanks for the link and new info.

  The reason is the same as in these quotes from doc that I have provided. As ORA-01111 indicates the name of the actual file is unknown so Oracle creates a unique name, then stops recovery so that you can provide the name and location.

  Why, during the flashback database, retrieve a tablespace has fallen...

  This formulation and the wording of the article, is probably what is mislead you. You cannot recover a tablespace using FLASHBACK DATABASE:

  Here is the doc for FLASHBACK DATABASE

  http://docs.Oracle.com/CD/B28359_01/backup.111/b28273/rcmsynta023.htm

  Notes A Flashback Database use operation applies to the entire base. You cannot flash back, individual storage spaces. A Flashback Database operation is similar to a point-in-time data recovery (DBPITR) with RECOVER , but RMAN uses flashback logs to undo changes to a point before the time runs out or SNA

  See that second sentence? You NEED to recover the entire database and, as this quote from doc says, made it like CAMILLE by RECOVER.

  In this example, the storage space AND data files were dropped. So please check the doc to DROP TABLESPACE

  https://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9004.htm

  Oracle database deletes all metadata about the space of storage data files and all the data dictionary tempfiles in the tablespace. The database also automatically removes the operating system all data files managed by Oracle and tempfiles in the tablespace. Other data files and tempfiles are not removed from the operating system unless you specify INCLUDING CONTENTS AND DATAFILES .

  See? No additional data in the dictionary for the tablespace or data files. Real datafiles is more if they were managed by Oracle. But there MAY be data files of the operating system if you do NOT use this last clause.

  If Oracle recreates the files using unique names and then allows you to CONFIRM that the name and location should really be.

  You have a problem with that? Or just try to understand?