Select the function

Similar Questions

• Grant permission to select the function but not executed in a PL/SQL block

  Hello.

  I know that there are only two permissions on procedures/functions - RUN and DEBUG.

  But I want to grant EXECUTE permissions for a user so that the user can Select the function to double or to any other request, but not to run(to prevent the user to trigger the update of LMD - insertion, etc.) inside a BEGIN-END block.

  I know that we can revoke access to tables etc. But that access has to give. The user must be able to perform the DML operation, but just not through a function.

  Can someone please help?

  I know that there are only two permissions on procedures/functions - RUN and DEBUG.

  Fix - so give one or both of those who depend on your use case.

  
  But I want to grant the EXECUTE permission to a user in such a way that the user can select the function using dual or any other query but not execute( to prevent the user from firing DMLs - Insert, update etc) inside any BEGIN-END block.
   
  

  You already know that there is NO "select" privileges for functions. a query such as "select the function of double" RUNS the function. That's all what you can do with the functions is execute them.

  I know that we can revoke access to tables etc. But that access has to be given. The user should be able to do perform DML operation, but just not through a function.
  

  Then revoke execute on the service. Then the user cannot run the service either directly or in the context of a dml statement.

• AppleScript: Select the audio files in the Finder, to create playlist

  So, I have modified this Applescript courtesy of WoodenBrain and tried to deconstruct to use. What I need to do, is to be able to select the audio 3-4 files in the Finder, then contextually, select the function "Add to iTunes Playlist", that iTunes ask me for the name of the playlist, create playlist and add files. The script below which realizes, but has an additional step that allows you to select available playlists. I want to remove and don't have iTunes adds the music files to the newly created playlist.

  I know that the solution is somewhere between the block of choice, but I can't seem to get the name of the created playlist and use the the_plvalue. Any ideas?

  on run {parameters}

  Try

  Activate application "iTunes."

  say application "iTunes."

  define newFile to the text returned by (display dialog box default response "Playlist name?" » »)

  make new user playlist with properties {name: newFile}

  set the_playlists to the of each user playlist whose name friendly special is none and smart is false

  the value the_playlists to iSort (the_playlists) to me

  (* to remove the next block *)

  say me to the value the_choice to choose from the list the_playlists with prompt "Add selection to this playlist:

  If the_choice is false then error

  the value the_pl to issue 1 of (every playlist whose name is the_choice)

  (* end choice block *)

  activate

  the value reduced to window 1 to false

  the value cn to (number of points in entrance)

  Repeat with I have from 1 to cn

  say application 'Finder '.

  game of the_item to (point as aliasentry, I)

  If I = 1 then set iname to the name of the_item

  end say

  Add the_item to the_pl

  end Repeat

  end say

  end try

  back entrance

  end run

  on iSort (_list)

  _length set to length of _list

  If _length > 1 then

  Repeat with I have since 2 to _length

  Set temp to the point I of _list

  set j to i - 1

  Repeat while (not (j = 0)) and (point of _list j > temp)

  set agenda (j + 1) of _list to the point of _list j

  set j to j - 1

  end Repeat

  set agenda (j + 1) of _list to temp

  end Repeat

  end if

  return _list

  end iSort

  on is

  Hello

  Put the output of the command of playlist make new user in a variable.

  No need of a loop, the add command takes a list of files.

  -----------------

  the term {parameters}

  Try

  Tell application "iTunes".

  activate

  the text returned by the value tNom (show the default dialog response 'The Playlist name?' » »)

  the value of the_pl to the new playlist user with properties {name: tNom}

  Add entry to the_pl

  reveal the_pl - show the new playlist

  tell the end

  try to end

  Back entrance

  end of race

• SQL: how to display the second string of the function in the Jobs table only if the function has more than one string.

  SQL: how to display the second string of the function in the Jobs table only if the function has more than one string.

  Hello

  You can use REGEXP_SUBSTR Oracle/PLSQL: REGEXP_SUBSTR function

  Select the function double REGEXP_SUBSTR('PUBLIC RELATION REPRESENTATIVE ','[^]+',1,2);

  Do you have any value of the column as no 2nd string?

• That should make the function groups when it is selected in the phone app?

  I see an option for selecting groups when you use the Contacts feature in the phone application.  What makes that?  I want to set up groups of my own, but don't see how to do it or if it is still possible.  Any ideas?  My app has a function of groups and I set up some groups here as family, teammates in our fantasy football league, etc..

  Thank you

  jbacinti

  Basically, the use of groups allows you to send an email or a message to everyone in the group.  You simply select the group you want to instead of each individual.  To configure groups, check out these links:

  Send a message from your iPhone, iPad or iPod touch - Apple Support Group

  iCloud: create a group and add contacts

  Can create you additional groups to your Favorites. iPhone 6 s

• Select the boot device appears to casual throw & computer freeze certain functions

  HP Compaq Pavilion 64 bit, windows 7 Home premium

  6 months ago replace hard drive with the drive hard seagate 1 TB 64-bit

  Computer functions started random freezing of microsoft works, don't access the start menu, task bar functions, classifications, etc. all random works poorly but still able to use count in browsing the web. I look at you tube for long periods seems to stimulate the problem. Computer being left pending. Computer freezes seems to disappear spontaneously during use or after sleep or restart.

  Commissioning shows a blue square in the middle of the screen with:

  Select the boot device

  ST 1000 DM003-1 ER162

  HP DVD - Ram GH40L

  F4 amorçage using default

  What boot device use.

  Unplugged the hard drive and turned on pc and hp dvd - ram gh40l was only peripheral boot

  Replaced the motherboard battery already.

  I did the command line; sfc/scannow, HDD and motherboard diagnostics, repair of disks does not.

  One alternative is to reinstall windows 7 with discs or install windows 10 as an alternative.

  Hello @zoboomafoo,

  Thank you for all the information!

  What have been the results of physical tests?  If all the past, then it seems that you encounter problems with the operating system.  If the problem is actually related to the operating system, then by reinstalling Windows will help you solve it.  This should help to address issues with malware.  Upgrade to Windows 10 is an option, however, you don't have full support of drivers.  I hope this helps.

  Kind regards!

• by selecting the max value of the rank function.

  Hi I have the following querry on the table use:
  
  Select user_id, e-mail,
  Rank() (PARTITION BY Email order by user_id) AS rank_l
  of users_tab;
  
  It gives me the result as follows:
  user_id E-mail rank_l
  1 1 [email protected]
  2 2 [email protected]
  3 [email protected] 1
  4 [email protected] 2
  5 [email protected] 1
  6 [email protected] 2
  7 [email protected] 3
  
  I need to select the user rank max id from the result set.
  in this case, the result should I get is:
  user_id E-mail rank_l
  2 2 [email protected]
  4 [email protected] 2
  7 [email protected] 3
  
  
  Help, please?

  Hello

  The "with" clause is only for the purppose test, use your own data. The solution is in the OLAP NTH_value function.

  select
  distinct
  nth_value(user_id,1) over (partition by email order by user_id desc) as id,
  nth_value(email,1) over (partition by email order by user_id  desc) as email
  from users_tab
  order by 1
  

  It works with your own data?

  Kind regards.

• Select Into statement in the function db - query issued schema table

  problem with "select into" in the function db to point 10.2
  
  
  There are two schemas. "mdbdev" is the master database, and 'devusr' is granted SELECT access table to run queries in the mdbdev schema.
  
  
  with devusr, in SQL, I am able to run the following query
  
  Select wm_concat (strConcatedCountryList)
  from (select country_name as mdbdev.country_master mdbcm strConcatedCountryList
  where mdbcm.country_ship_status = < param? >
  order of country_name)
  
  
  
  but when I use the same procedure/function with 'select into' motion, failed to compile with error * "table or view does not exist."
  
  
  FUNCTION GETCOUNTRYLISTTOSHIP (SHIP_STATUS NUMBER)
  RETURN VARCHAR2
  IS
  var2CountryList VARCHAR2 (1000);
  BEGIN
  Select wm_concat INTO var2CountryList (strConcatedCountryList)
  from (select country_name as mdbdev.country_master mdbcm strConcatedCountryList
  where mdbcm.country_ship_status = value < SHIP_STATUS >
  order of country_name);
  Return var2CountryList;
  END;
  
  
  Please advise/help/suggestion :)

  You don't have to ask for the DBA, you can run a query to find out:

  select *
  from  all_tab_privs_recd
  where owner = 'MDBDEV'
  and table_name = 'COUNTRY_MASTER'
  

  What give you?

• How to pass parameter in the function using the select statement?

  Hello
  
  I had a problem. I can't pass as parameter to the function by using the select statement. But it can pass as a parameter using the "code". How can I solve this problem?
  
  For example,.
  Select * from table (SplitFunction ('HS750020, HS750021')) < < < this work.
  
  but
  
  Select * from table (SplitFunction (select LOT_NO in the TRACER_SEARCH_SCHEDULE where JOB_ID = '36')) < < < do not work.
  
  Thank you for trying to help him. Thank you.

  Select * from table (SplitFunction (select LOT_NO in the TRACER_SEARCH_SCHEDULE where JOB_ID = '36'))< do="" not="">

  Try like this

  select * from table(select splitfunction(lot_no) from tracer_search_schedule where job_id='36')
  

  Just make sure that your subquery returns only 1 row.

• can we write the function in a select statement?

  I have function and there Out parameter, so in this case I can write a select statement to my function to retrieve the value?

  user11195165 wrote:
  I have function and there Out parameter, so in this case I can write a select statement to my function to retrieve the value?

  Never mind that it's bad! for a function to have an OUT parameter. That's not how the functions should be designed and written.

  It's like with a knife like a spoon to eat porridge. Of course, it can work in a way. But why? A knife was never designed to be a spoon - and while it may work of porridge to eat, you'll have a hell of a time trying to use it to eat the soup. So, use the right tool.

  In other words, a function is the wrong tool for the job. Use a procedure.

• When I use the control panel and select programs 'enable or disable the functionality of windows' list appears ever all I get is a blank window, no list, so I press ok or cancel, im getting nowhere

  I tried to fix the spooler sys error app in question, that I asked previously about Adobe flash plugin crash

  When I go to control panel and select Programs - turn off features the window if poster where the list would be, says wait then nothing appears

  I can't select the LDP and the LPR I read as the solution, I can also change the Internet printing Client because the list of options does not appear

  Hi Falcon,.

  I came to find this article pertaining to your question. There may be suggestions that you have already tried, try again with the others and an update on the same. Let's see if it helps.

  I hope this helps!

• How to activate the function "select similar" in CC?

  This may sound stupid, but it is grayed out currently. I just want to select a portion of the white background and go to "select" drop-down list, click on 'similar' and have it select each single white pixel in the page, so I can remove it.

  That is all I want.

  Are sure you that you have chosen you are working on the layer? Because if you have not selected it grayed out will look like this. But when you have selected the layer it should work even if the layer is a dynamic object.

• Select the layer function in action

  I have three layers with text in different languages. I want to record in three different PNG files.

  I tried to do action, select the layer, hide it and save it. Select another layer, then do the same thing. But the selection of layers is not saved to the action.

  Is there a solution?

  big thank you

  No, I don't think. The selections are what they mean - interactive decisions which provide a context for a tool or a command. What you would require a script, and even in this case, you have to take care to name the layers properly in the first place...

  Mylenium

• How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.

  How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.  If it has been deleted to "improve" the Photo experience?

  Lot, what exactly will change?

  Titles, Descriptions and capture date - Yes.

  Select the images you want to change the title or the description and to set-up the info (command-i) pane.  Enter the title or the description in the appropriate field and he will be assigned to all selected pictures.

  

  If you want to batch, change the title with sequential use attached many Applescripts provided by users in the Photos for Mac user tips section.

  Batch change/correction of dates is provided by the Image ➙ setting Date and time menu option:

  

  

• Please correct the function map for photo albums in Photos

  Dear Apple people - difficulty please please the function map for photos in photo books. I loved the features of cards in iPhoto, so why go to all the trouble of screwing up so royally in Photos v1.5? A few examples at random: instead of being able to type a place name and have the program to find the place for you, must now click on the + sign, then a red dot appears in a place at random (as in the middle of the Tasman Sea), and we can then move the red dot at the location you want (after first checking a different map to determine the correct location of the place you mean - Port Douglas Australia for example). A colossal waste of time. Or how about this: it takes an hour to put the plan in place so, then closes the program. At the next opening it, found the red dots have all migrated to odd locations around the map, bearing no resemblance to where they were placed at the origin. Once again, a huge waste of time. And it's only two of many examples.

  Please, I beg you, bring back the features of cards in iPhoto!

  1 - Apple isn't here - it is strictly a user to user forum

  2 - person here can fix anything

  3. you can certainly type the names of places with pictures - using Photos (a great place to get help with Photos)

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
  • Add or edit information:

  • Change the following.
  • Title: Enter a name in the title field.
  • Description: In the Description field, type a caption.
  • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
  • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
  • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
  • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet

  4 - If you want to discuss the Photos it is best to post in the forum Photos rather than the abandoned iPhoto product forum - I would ask that this be moved

  5 - If you mean apple use the correct form - http://www.apple.com/feedback/photos.html

  LN