Black screen with Satellite P200-143

Similar Questions

• Satellite Pro A200 - black screen with a blinking cursor

  Hello

  I'm new to the forum and have a big problem.
  So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
  Also just as the screen goes black a beep can be heard which shows windows boot.

  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  Please go into the BIOS settings and check if the HARD drive is listed there.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

  Good luck

• Satellite L850 - 17 k - black screen with blue dots

  Satellite L850 - 17 k black screen with blue dots see photo
  It is THE video card, can't find it.

  See photos

  If you see the same on internal and external display LCD, I presume that the video card is faulty.

• Satellite X 205-SLi3 - black screen with the mobile mouse at startup

  I have a computer laptop X 205 - Sli 3 satellite, which is a little more than a month and running windows Vista. (let me know if the exact specifications make a difference)

  Yesterday morning my laptop was working fine, I arrested him at home because I need to take to work with me to get some files there. However, when I tried to turn it back on all I got was a black screen with cursor mouse mobile white dead center. I saw other posts with similar problems, but no solutions.

  Loads everything up as normal at the beginning: I get the Toshiba load screen (this allows me to make changes to the boot from there with F2, F8, F12 or, but none seems to have no effect) and I get the little green loading bar of Microsoft just before the screen blinks a few times and then turns black except for the white mouse. The touchpad, Capslock and scroll lock keys * are * admissible, but the function keys and Ctrl + Alt + Delete to do * not * work. There is no way to stop the laptop at this point without maintaining the power button.

  I tried to start in safe mode, safe mode with networking, safe mode with command prompt, only to get exactly the same result after Windows loading bar. (only a lower resolution on this beautiful Virgin high-def screen mouse cursor). I activated the boot record, nothing, I tried to start with the "last known good configuration", nothing.

  I tried windows repair options: repair system, System Restore (it * was * a windows update just before restore point in my laptop screwed up and I m wondering if that has something to do with it because it was the first time the computer was turned off since the auto update installed... but get an older restore point does not help) , as well as the windows memory diagnostic tool. Everything is displayed normally but still black screen after the loading bar Microsoft...

  I also tried the debug mode, and directory services restore mode just for the heck of it - each time the black screen of death.

  I even put in the Toshiba recovery disc and put my laptop to boot from the CD rather than the HD (it gives me the same options by pressing F8 and go to repair are starting only I didn't have to put my admin password)

  The only thing I can think that I n t done is format my whole hard drive, I know that this is not always a solution, and I prefer to keep all my school and work files if possible. Fortunately I am able to get into the command prompt BACK and some of the most important things am copy on a USB key, but I'll still probably lose all my programs and larger files.

  Someone had a similar problem?
  If so, what was the solution?
  I would call all technical support, but I won't have time until after the new year to spend on the phone and I have a feeling that their solution will be to format and use the recovery disc.

  Man, such an expensive machine and then all this work of wouldn because of some software sh... So, if you have backed up your most important files, then, I would _recommend_ you to recover your machine. Won´t solve you anything just trying to find the error, believe me, you'll go nuts.

  Just put the recovery in the drive and start the process of "delete-all-my-programs-but-protect-my-nerves-and-make-everything-OK".

  Welcome them

• All black screen with a mouse that is visible on the Satellite

  I have a toshiba satellite laptop 2 years old, and it works pretty well so far (battery replaced in July).

  Yesterday, I was using it as usual, then close the lid and went for a shower.
  20 minutes later, I came back, it works again, and he went to a black screen with a visible mouse.
  However, none of the keys produce any response and the mouse not to slam.

  I tried several times it works and stop.
  Twice he went to a white screen with all the icons of bottom bar of size reduced and grouped in the upper corner, as well as a few photos, that I had just downloaded.

  A few forums I saw answer other users have suggested using the vista disk to restart, but I'm on study abroad for a year in the United States and thus didn't drive.
  In addition, these users reported a collision until it happened.

  I'll keep on at the current time to turn off in the hope that it will come back to life after a stop appropriate through loss of power.

  I would be really grateful for any suggestions you can give me, thank you.

  Hello

  I put t know which model of laptop you have, but the first thing that you should try the new installation of the OS.
  You don t have any installation disc that's pity
  However, you can try to start Notepad using a Windows live CD.
  This system is called BartPE or WinPE
  Google for it

  This don t systems must be installed on the HARD drive, it works like a linux live cd you boot using such a disc and a few sec later you get access to the HARD disk

  I think it is good idea to check if the laptop is ok

• Satellite L550 - black screen with mobile cursor on startup

  Hello world

  I have a Win7 of Toshiba Satellite Pro l550-17u with a startup problem, black screen with a cursor, but not going beyond.

  Tried to reset the default values on initial F2 menu configuration
  Tried to boot in safe mode and the safe mode with networking
  I tried Repair computer option
  Tried the restore advanced user
  Tried to load the recovery disk
  Tried to boot the laptop directly from the disc
  Tried to remove the battery, but made no difference

  When I get the white screen with the cursor, I tried a few things mentioned.
  Ctrl + alt + delete to get the Task Manager, but nothing.
  Pushin' Win + R to open the Run dialog box, but it does not work.
  Click on SHIFT 5 times quickly to get ticky key opened to get to the Control Panel, but it did not work for me.

  Last night did not turn on my laptop turned off but when opened I received a message that my system has recovered from a serious error, you click on close and then it turned off my laptop had this problem since.

  Next step i think I can reinstall the memory but don't really want to start taking it to bits.

  I also have a large amount of data I really want out of the hard drive. any suggestions?

  Any help or suggestions much appreciated

  Hello

  To be honest, for me it looks like a Windows problem. Maybe something messed with the registry and Windows can start t more

  I think that you must restore windows recovery disk Toshiba you wrote that you have tried to load the restore disc but what happened after that? Can start the installation of recovery? If so, you should do this.

  Backup, you can do if you buy an external HARD drive enclosure. Remove the HARD drive and install in the case of HARD drive. Now you can connect to another computer.

• Satellite A660 boots up to the black screen with blinking cursor not upper left

  My new Satellite A660-10W sometimes (not always), when turned on, boots up to a black screen with a flashing cursor in the top left. If I stop by pressing the power button, it stops immediately. I then wait a few seconds and press the power button again and then it usually starts very well.

  Could it be updated during this process and I'll be more patient (usually wait a few minutes) before shutting down when this happens?

  Usually something like that shouldn't happen. Satellite A660 is no different from all the other models and OS must be loaded shortly after Toshiba welcome screen appears.
  Do you use your laptop with factory settings or you have changed something?

• Satellite A100-906 - black screen with a cursor

  Hi all

  There is a problem with my Satellite A100-906:

  After having lit - Toshiba page appears - that the loading Windows XP page - more than a black screen with a cursor (the touchpad moveable)... and nothing more.

  That's what I tried without success:

  Detach the battery for over an hour
  Start the computer with battery detached
  Change the default BIOS settings
  Start in Safe Mode - the same black screen with 'safe mode' legends in the 4 corners of the screen.

  Please help with this.

  Hello

  According to your message, the screen of the laptop BIOS is visible and also the Windows screen.
  I think that it s not a hardware problem but a software problem.
  Maybe your operating system is confusing until you think about using the Toshiba Recovery disk and to restore the system?
  I mean you already tried the passage without danger and she didn't so in my opinion, the next step should be the new installation of the OS
  Check it out!

• C50D satellite - black screen with code series

  I just changed on my computer and it came with a black screen with a series of code

  series of code?
  What is the text that you see?
  If you google code, you can find the solution.

• Re: Satellite L300 - black screen with flashing white cursor

  All of a sudden my laptop won't start more. It turns on, displays screen toshiba for a second and then goes to a black screen with a blinking white line in the upper left corner. I can't type something here! The last time I used it it was 100% very well, I have not downloaded anything so I'm very curious to what it might be.

  Help, please!

  Hi mate,

  Maybe something messed up to the top of your Windows installation and if the computer may start t more or your HARD drive becomes faulty...

  You can access the BIOS? If so, check if your HARD drive is recognized. If so I think that it of necessary to reinstall Windows. Therefore, take the Toshiba recovery disc.

• Question on drive recovery on Satellite P200-143

  Okay, guys, I bought a Satellite P200-143 at the start, and I have to get it back today, just to get rid of all the junk on this subject and when that I start, press F12 and it's fine. When the small black screen appears and it says "progress [insert here the percentage]' he always sticks to 54%.» I think it's because the disc has scratches on it.

  Does anyone know where I could download the installer of recovery of online? I am running Windows Vista by moving over it.

  Any help appreciated.

  Unfortunately, you can not download the image of Toshiba of all Toshiba websites.
  If you want to recover the laptop with the image, then you need to use the Toshiba Recovery CD.
  If your CD-ROM is defective then you can order it from the ASP in your country. To my knowledge it s not expensive.
  Talk to the technicians ASP and ask that compatible.

  Best regards

• Need to go XP Display Driver Nvidia GeForce 7600 for Satellite P200-143

  Hello

  I started my P200 - 143 Toshiba Satellite Vista double. But I can't find the NVIDIA drivers on the site Web of Toshiba. I tried many downloads of the nvidia Web site, but no one has been installed properly resulting in the flicker of screen on XP.

  Kindly let me know the location of the driver to download the existing drivers from nvidia works perfectly or there is no particular sequence in which the drivers will be installed.

  Any quick response is highly requested, please.

  Kashi

  Sorry, buddy, but I don't quite understand you.
  You have P Satellite P200-143 with model number PSPBGE-xxxxxxEN.

  So what you need to do is to visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So what you need to do is to choose the right laptop model:

  Type of portable computer product
  Familly Satellite
  P series Satellite products
  Model 0 Satellite P200 (PSPBG)
  Model short No. PSPBGE
  Windows XP operating system
  Type display driver driver

  SEARCH

  Nvidia 8.4.0.0 display driver version will be listed as a result.
  I think that Toshiba has tested this driver and it should work properly. Of course, if you install the correct version of Windows XP Home (SP2 of Windows XP Home edition) and other things following the Instructions of facilities document.

  Good luck!

• Vista Home starts with black screen with blinking cursor

  Hi, I have a toshiba satellite with Vista home, he stopped last Sunday, when I turn it on, start it start sbooting normally but then I get a black screen with cursor and is not go further. I tried last good known, tired, safe mode, I have same TOSHIBA recovery disk and does not either, when I boot from the CD, it seems that it is loading files, then the yellow bar on the work screen appears, but then I get the black screen with cursor, nothing after that.

  I took out HD and a Sata drive via the usb port to connect to my HP laptop. I was able to open the F and G, but C drive (where the OS is installed which has changed the letter e) could not open, he told me I need to format it.

  I have the original recovery disk for Toshiba, which works when the hard drive is not in the Toshiba, but when I put the hard drive back, I never the option where it asks me to repair or reinstall all.

  is it possible that I can use my laptop HP after the toshiba drive connected via USB, to repair the toshiba C partition (which is called E)?

  There are more than 2 weeks worth of work that are not backed up, and I wouldn't lose. Help, please.

  Hi MB1969,

  This seems like a hard disk failure. You must get in touch with Toshiba to get help.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.