Select the tool parameters?

Similar Questions

• How to set the slider tool to select the tool when opening acrobat XI 11.0

  I need the tool to default to the Selection tool and NOT the hand tool slider when you open Acrobat XI 11.0

  Hi mkwillden,

  Once you select the "Select" tool any subsequent launches of the software should keep the 'selection' as default tool.

  If this isn't the case, you can specify the parameter registry here:

  HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\Selection

  Change the data of aDefaultSelect to Select or by hand as requires it.

  
  

  Kind regards

  Rave

• Using Photoshop CS6 - impossible to select the tool or zoom etc.

  With the help of Photoshop CS6 on a Toshiba laptop. Display mode satellite L850 CPU Intel I7-3610QM @ 2.30 GHz - 12.0 GD Ram - 64 bit - Windows 7 - Direct x 11 - AMD Radeon HD ATI 7670 M graphics card - current... 1920 x 1080 - I start by opening a photo to work on a tutorial as a beginner. I right click on spot corrector, selection current "spot Healing Brush tool" if I try to the left click to select "Healing Brush tool" custom for quite awhile, and I can't hold space bar to display the hand to move and sometimes cannot even zoom. This produces no matter what tool I select. Can anyone help?

  It should be fast. Try resetting your preferences of the ID of user with all the tools of Photoshop Photoshop.  If you don't know what causes the problem your having with CS6.

• The upper part with the tool parameters

  The upper part where you see or change the setting of the tool has moved a little and I can't get it back, he's hiding the menu

  If you still can't make it work, go to Edit > preferences > General, click on reset preferences on exit and restart photoshop.

  

• InDesign CS5.5 cannot select the tool move

  I have InDesign CS5.5, installed on a desktop computer (Windows 7 Home) and it works fine. I installed it on a second desktop computer (Windows 7 Professional). It seemed to install and update fine. However, if I create a new document and drag a rectangle I can't access the move tool to move and I can not change the size and position using the boxes below the menu bar.

  All of the suggestions.

  Tony

  See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

• By selecting the appropriate parameters for a new project

  I'm about to start my first project with Premiere Elements and the final result for the project be must be a H264 or "WMV" file that can be uploaded to an FTP site.  It will also be displayed in front of a group on a screen (size is 7.5 ' x 10'.)

  What is the most optimal project settings that I use when I start the new project?  Something in the AVCHD category?  (With the help of NTSC).

  Thank you!

  (Sorry... This is a repost... I accidentally sent in the PS forum at the beginning).

  With the Audio and still Images ONLY, you can go with 1920 x 1080, full HD at 30 fps (NTSC) or 25 FPS (PAL), depending on where you live.

  For images, I'd like to see this ARTICLE. Note: it was written when SD was the norm, but as HD took over, sizes have been faced to understand this, as well.

  Images of PowerPoint may be problematic, but recent versions of the program can export slides as TIFF Images. I would like to keep as much of the material as possible in PSD native Photoshop, PNG or TIFF. Unless you start with formats JPEG, I would not save Images in JPEG, to keep this stage of compression on the mixture. Many have found with PowerPoint slides, they are better off starting from scratch and those in Photoshop or Illustrator maybe build. If you go with Illustrator or similar vector Art program, I would import into Photoshop and not the pixelation, rather than import the Images of AI in pre and use it for the pixelation.

  If you have any music (the narration must be PCM/WAV at first), I have that converting to PCM/WAV, if IE MP3.

  Good luck

  Hunt

• Select the crop tool, and then select a ratio (based on the name of the file)

  I have a lot of files that when I their culture that they need a specific report. Currently, they are stored in the tool.

  I wish I could make a shortcut so that it selects the crop tool and the report to the file name. I can understand the file name information.

  i.e. Fr10 = a 2:3 Ratio

  or

  20 = 3:4

  There is no need to crop the image simply select the tool.

  I found this to select the tool

  The beginning is the same.

  if (app.documents.length > 0) {
      var myDocument = activeDocument;
      var fileNameNoExtension = myDocument.name;
      
    fileNameNoExtension = fileNameNoExtension.split( "." );
      
    if ( fileNameNoExtension.length > 1 ) {
        fileNameNoExtension.length--;
      }
  
      fileNameNoExtension = fileNameNoExtension.join(".");
      
      var BrandString = fileNameNoExtension.substr(0,4);
    
    }
  if (/^(FR10|WA35)$/.exec(BrandString)){
      var the_x_Ratio =2
      var the_y_Ratio =3
      }
  

  2016, use it at your own risk.

  #target photoshop

  If (app.documents.length > 0) {}

  myDocument var = app.activeDocument;

  var originalRulerUnits = app.preferences.rulerUnits;

  app.preferences.rulerUnits = Units.PIXELS;

  var width = myDocument.width;

  var height = myDocument.height;

  var rel = 1;

  If (myDocument.name.indexOf ("AB10")! = - 1) {var rel = 0,666};

  If (myDocument.name.indexOf ("CD10")! = - 1) {var rel = 0.75};

  If (myDocument.name.indexOf ("EF10")! = - 1) {var rel = 0.8};

  If (myDocument.name.indexOf ("CH10")! = - 1) {var rel = 0,833};

  try {}

  // =======================================================

  var idCrop = charIDToTypeID ('Crop');

  var desc3 = new ActionDescriptor();

  idT var = charIDToTypeID ("T");

  var desc4 = new ActionDescriptor();

  var idTop = charIDToTypeID ('Top');

  var idPxl = charIDToTypeID ("#Pxl");

  Desc4.putUnitDouble (idTop, idPxl, 0);

  var idLeft = charIDToTypeID ("Left");

  var idPxl = charIDToTypeID ("#Pxl");

  Desc4.putUnitDouble (idLeft, idPxl, (width - height * rel) / 2);

  var idBtom = charIDToTypeID ("Btom");

  var idPxl = charIDToTypeID ("#Pxl");

  Desc4.putUnitDouble (idBtom, idPxl, height);

  var idRght = charIDToTypeID ('Rght');

  var idPxl = charIDToTypeID ("#Pxl");

  Desc4.putUnitDouble (idRght, idPxl, (width - height * rel) / 2 + height * rel);

  var idRctn = charIDToTypeID ("Rctn");

  Desc3.putObject (idRctn, idT, desc4);

  var idAngl = charIDToTypeID ("Marko");

  Bryan var = charIDToTypeID ("#Ang");

  Desc3.putUnitDouble (idAngl, Bryan, 0.000000);

  var idDlt = charIDToTypeID ("Dlt");

  Desc3.putBoolean (idDlt, false);

  var idcropAspectRatioModeKey = stringIDToTypeID ("cropAspectRatioModeKey");

  var idcropAspectRatioModeClass = stringIDToTypeID ("cropAspectRatioModeClass");

  var idpureAspectRatio = stringIDToTypeID ("pureAspectRatio");

  Desc3.putEnumerated (idcropAspectRatioModeKey, idcropAspectRatioModeClass, idpureAspectRatio);

  var idCnsP = charIDToTypeID ("CnsP");

  Desc3.putBoolean (idCnsP, true);

  executeAction (idCrop, desc3, DialogModes.ALL);

  } catch (e) {};

  //

  app.preferences.rulerUnits = originalRulerUnits;

  };

  Edit: Using the indexOf can be problematic and if-clauses are inelegant, then a switch clause would be probably better.

• Take the tool does not. Take the tool selected - can see the hand but will not take anything

  Hello

  I'm new to photoshop and I am currently working through the tutorials on Lynda.com to learn as much as I can, but I'm stuck at the minute. Tutorials wants me to use the Snipping Tool to move an image and no matter what I do nothings moving. I selected the tool and see that it is selected and that the needle moves on the image but it is not striking, no selection.

  I also did with the letter to select the capture tool. Once again, this works, but will not take anything.

  Any entry in this problem would be highly appreciated. Thank you

  Hi Clara-beautiful,

  Hand tool is running when your image is enlarged and that you want to move to a specific part of the image.

  You must move your image with the mouse after a zoom once you have selected the hand tool.

  Are you a person following the same steps in workflow or other?

• How to use just 1 click away with the move (v command) tool to select the layer in the Group?

  I'm on Snow Leopard 10.6.8 Photoshop CS3 10.0.

  Is it possible to click only once with "V command" to select a layer in a group?

  I used to be able to do and on my laptop I can do now (same OS and Photoshop), but the mac that I use for my design work won't... I must also, right-click and select the layer highlighted. I have a document a lot of multilayer Photoshop with many groups, and it is an extra step of your time.

  Is there a preference I can turn on? Or some other simple typo?

  Thank you very much!

  Select the tool move and set the options of the control bar. By default, it took to select a group, simply change layer.

• Cannot select the junk e-mail tab in OUTLOOK 2011

  I use Outlook 2011 14.5.8 version on my MacBook Air. The system is 10.10.5 Yosemite.

  I want to set the junk e-mail filter. When I select the Tools menu, tab 'Spam Protection' is there, but gray, which is inaccessible.

  My junk mail is untenable.

  Any suggestions, anyone?

  I recommend you to visit the areas of support for Microsoft to find a solution.

• What is the tool that means?

  Hi, I'm studying Photoshop by reading the book "Adobe Photoshop CC Classroom in a Book (2015 version)". At the end of Chapter 2, I encountered a problem in the following passage:

  

  On the red line, the book says "select the tool in the upper left corner of the adjustments Panel", but I can't find anything in the upper left corner of the adjustments Panel. What is this tool the book means, and where is he? Thank you very much.

  I think that it's a typo. Look in the properties panel when you use the black and white adjustment tool. You will see an icon in the upper left corner. It looks like a hand that suggests the sliding.

  When you click this icon, you can choose a region and drag left or right to increase or decrease the brightness of which allows to be this color.

  

• Do when the toolbar is disabled - none of the tools be used?

  What should I do when the toolbar is disabled?  I am not able to use the tools - all I get is a circle with a line through it once I have selected the tool I want and then place the cursor on my image.

  Thank you!

  Smart object layers are not directly editable. You can't paint, for example directly on the smart object layer. The solution is to double-click the thumb of SO to change its content or to paint on a new empty layer preceding. Other tools like the Healing Brush tool have option: all the layers and current and below in the Options bar , which allows you to work with them on a separate layer (top layer) and use layer SO data (for the pixels in the sample).

  

• How do you get all the tools out of sight guided PSE14 tab?

  The new view on the tab tour can be modified to be able to see the picture that must be changed with one of the other two tabs going first?  View default tour tab is filled with what seems like a tutorial page. The tab page view guided much is a source of distraction and slows down the work.  Yes, som of the guided tools are more efficient to use than the Expert tool selections, so I end up with about the same amount of time.  Now, it is very heavy.

  I'm not a psychic. I generally would like to see the image that I will edit the first and then select the tool to use.  The new view on the 'Guided' tab shows all the tools that you can use to change the photo.  But the picture is not displayed.  I'm not good to choose the tool first, before I see the picture.  I'm not inclined to look at the photo on the Quick tab, or on the Expert tab first and then go to the guided tab and choose a tool.

  Thank you

  Hetz3 wrote:

  The new view on the tab tour can be modified to be able to see the picture that must be changed with one of the other two tabs going first?  View default tour tab is filled with what seems like a tutorial page. The tab page view guided much is a source of distraction and slows down the work.  Yes, som of the guided tools are more efficient to use than the Expert tool selections, so I end up with about the same amount of time.  Now, it is very heavy.

  I'm not a psychic. I generally would like to see the image that I will edit the first and then select the tool to use.  The new view on the 'Guided' tab shows all the tools that you can use to change the photo.  But the picture is not displayed.  I'm not good to choose the tool first, before I see the picture.  I'm not inclined to look at the photo on the Quick tab, or on the Expert tab first and then go to the guided tab and choose a tool.

  Thank you

  Thinking that the first view of the new "guided" interface is simply a menu, not a Workspaceedition. Each photo is a menu item. You must choose your option before accessing your editing space. It is the now universal way of selection in tablets and smartphones, you may not like it (I didn't) but that won't slow down your workflow.

• Is anyone else having problems with the tools of photoshop works do not at all?

  I've updated my photoshop CS6 for CC and now a bunch of my tools do not work. The dodge, Clone Stamp tool, and a few other tools do not work.
  Anyone else has this problem or knows how to fix? My application is updated.

  I tried to contact adobe and they have not responded.

  Thanks in advance.

  Hi alexisu,

  Greetings!

  Try resetting all the tools

  To reset a tool, you must first have the selected tool. Then Ctrl-click (Windows users: right click) the button tool preset in the Tool Options bar.

  

  When you click this button, you will see a small menu and you can select Tool Reset to reset the current tool to its default value or reset all tools to deliver all the tools to its default value. Once selected, the tool will act as the first time you have used it.

  

  Using this simple method to reset your tool with a single click, you can quickly remedy any situation where the tool does not correctly and to maintain the flow of creativity going.

  Concerning

  Jitendra

• 101: explanation of the tools in the Panel?

  I'm going through the tutorials but seem to Miss where I can find an explanation of the tool panels and their functions. The tutorials do not necessarily explain it (sometimes they do).

  Hello

  Very well! So let's start with gold playhead in the timeline panel. This is different from the PIN tool, because that's literally what you can use to define where you want keyframes to be manually in your timeline. You can also use this to navigate backwards in the timeline by clicking on the read head gold and drag through the timeline. This is also known as rub. The best way to think of the read head is to be considered as a "bookmark" in your timeline.

  

  The Pin tool is a great little tool that is unique on board animate. Significantly, it improves your productivity while animating and eliminates the need from keyframe to the hand.

  

  With the selected PIN tool, you will notice a blue pin in your timeline. You can click and drag this PIN back and forth to set a literal "PIN" in your timeline. When you do so, you will notice that your head stays in place. It is because what makes the tool of corner is literally "remembers" where your head is and then act as a second head for you so that you can keyframe with ease.

  Thus, for example, if you have a rectangle with an opacity of 100% at 0 seconds. If you click on the tool spindle and slide forward in the timeline to 1 second and then change the opacity to 0%, the Pin will be keyframe for you opacity to 0 seconds and 1 second, which makes the task of animating this transition easier. The rectangle fade from 0% to 100% opacity over a second.

  

  Another point to remember about the PIN tool, it's you will notice little rafters in the blue bar that extends from the time you dragged your corner tool. The rafters help explain where your animation is transient. They stress also everywhere where is your head. You can move the playback cursor in front of the PIN tool to have your key frame be the change of departure.

  As with our example before, if you have your rectangle to 100% opacity and you have selected the tool pin so you move the playback cursor forward. You can change the opacity to 0% and the rectangle now fade from 100% to 0% more than one second.

  

  I'll explain the image auto key and automatic transition in a second post tools. I hope this helps explain the tool spindle and the read head better!