SELECT... where ROWNUM > 1 does not work?

Similar Questions

• Select CTRL or copy, does not work - using the new Windows 7-

  Using the new Windows 7, it still does not work:

  > To select the non-consecutive files or folders, press in and hold the Ctrl key and then click each item you want to select.

  There is also the same problem when you use the Ctrl key to 'Copy', rather than 'move '.

  Sometimes a reboot will fix it, but other times not. Is it an appropriate solution for the Ctrl key work properly?

  Hello

  It is difficult to imagine a particular key for only certain combinations of keys does not?

  Here are a few troubleshooting steps that you can try to isolate if all goes well the problem.

  1. start the computer Safe Mode and try to reproduce the problem. Start your computer in Safe Mode

  2. perform a clean boot, and then follow the instructions in the following article to help identify the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  3. create a new user account, log in to the new account and test the issue. Create a user account

  If this step resolves the issue, is that your user account may be damaged. Replace

  your original user account.  How to fix a corrupted user profile.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Query to find the match on two areas where the third does not work...

  Faced with this one...
  
  Light of the example data
  

  SECTION     GROUPID     SUBGROUPID     COMPONENT     PNUM     USERNAME
  HVAC     AC     MOTOR          HOSE          111.1     BOB
  HVAC     AC     MOTOR          HOSE          111.2     BOB
  HVAC     AC     MOTOR          HOSE          111.3     JIM
  
  HVAC     AC     MOTOR          BOLT          411     BOB
  HVAC     AC     MOTOR          BOLT          411     BOB
  HVAC     AC     MOTOR          BOLT          411     BOB
  HVAC     AC     MOTOR          BOLT          (null)     (null)
  
  HVAC     AC     MOTOR          CLAMP          211.1     BOB
  HVAC     AC     MOTOR          CLAMP          211.2     JIM
  HVAC     AC     MOTOR          CLAMP          211.3     BOB
  
  HVAC     AC     MOTOR          STRAP          611.1     JIM
  
  HVAC     AC     MOTOR          BELT          811.3     BOB
  HVAC     AC     MOTOR          BELT          (null)     (null)
  
  HVAC     AC     MOTOR          DISC          (null)     (null)
  HVAC     AC     MOTOR          DISC          (null)     (null)
  HVAC     AC     MOTOR          DISC          (null)     (null)
       

  What I need is a list of records where the GroupID and component matching, and where they had a PNUM who were not all the same
  
  So in this case I would like to only these returned, Section/SubgroupID/username are not required to match on anything whatsoever, but here to view the
  additional data that may be there. Items that have PNUM which IS NULL should be ignored? Example would be the example above where the PNUM
  for a record was 811,3 while one below is null, which should not return. Its considered to be 'ok' and does not need to be reported.
  
  

  SECTION     GROUPID     SUBGROUPID     COMPONENT     PNUM     USERNAME
  HVAC     AC     MOTOR          HOSE          111.1     BOB
  HVAC     AC     MOTOR          HOSE          111.2     BOB
  HVAC     AC     MOTOR          HOSE          111.3     JIM
  
  HVAC     AC     MOTOR          CLAMP          211.1     BOB
  HVAC     AC     MOTOR          CLAMP          211.2     JIM
  HVAC     AC     MOTOR          CLAMP          211.3     BOB

  Hello

  To identify all incompatible groupid/component combinations:

  SELECT       groupid, component
  FROM       table_x
  GROUP BY  groupid, component
  HAVING       COUNT (DISTINCT pnum)     > 1
  ;
  

  To view information on all lines with these groupid/component combinations, use the query above in an IN subquery:

  SELECT  *
  FROM     table_x
  WHERE     (groupid, component)  IN
       (
            SELECT       groupid, component
            FROM       table_x
            GROUP BY  groupid, component
            HAVING       COUNT (DISTINCT pnum)     > 1
          )
  ;
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• Radio button problem: selected property of Option does not work

  I want an Option among two options in the radio group to be selected by default at the beginning of the application.

  Here are the ways I've tried.

  using QML:

  {Page}
  content:
  {Of container
  RadioGroup {}
  Option {}
  selected: true
  text: 'feminine '.
  value: female
  }
  Option {}
  text: 'Male '.
  value: male
  }
  }
  }
  }

  using RPC code:

  QmlDocument * qml = QmlDocument::create ("main.qml");
  AbstractPane * root = qml-> createRootNode();

  RadioGroup * group = RadioGroup::create () .add (Option::create () .text ("option 1").selected (true)) () .add
  (Option::Create () .text ("option 2")) .add)
  Option::create () .text ("option 3"));

  Application::setScene (page::Create (). Content (Group));

  in both directions, I get options with text, but default selection is not made.

  Use quotation marks for the value tag.

  If this does not help, you can try this:

  Page

  {
  content:

  Container

  {

  RadioGroup

  {

  onCreationCompleted:

  {

  Female.Selected = true;

  }

  Option

  {

  ID: female
           text: 'feminine '.
  value: 'Female'

  }
  Option

  {

  ID: male
  text: 'Male '.
  value: 'Mâle'
  }
  }
  }
  }

• Selection drop-down menu does not work on "display".

  33.1 Firefox latest and before that had the problem

  If I go to 'view' then 'zoom in' or 'sidebar' or 'toolbar' nothing shows.
  also can not copy or paste on / in the address bar.

  works fine in safe mode.

  But I can not disable add ons because
  those disable drop down menus do not work.
  so I can't turn them off.
  may have started in the last version
  SO I can't say which add on is a problem.

  BTW, I have windows 7

  Hello telebob, try turning off hardware accelerationand check again (in safe mode hardware, acceleration is disable).

  Thank you

• With Internet Explorer, to print something on the screen, I right click and select 'print '. It does not work with Firefox as 'print' is no upward with t.

  How to 'print' screen with Firefox?

  This extension adds a right-click to print and print preview (context) menu item. In addition, there is a toolbar button print in the Palette that you can drag a toolbar Customize.
  
  https://support.Mozilla.org/en-us/KB/customize-Firefox-controls-buttons-and-toolbars

• Flash does not work in FF26, it works in Chrome and IE. I reinstalled FF and Flash several times. I can't adjust the setting of local storage for Flash either.

  Flash does not work on some web sites. I never had a problem before with flash on FF in the nearly 15 years that I've used FF. Recently it has stopped working for some reason any and on some flash sites does not, NHL.com and site of kid Herotopia being just two of them. I updated FF, Adobe flash, the reinstalled version them repeatedly deleted all the files that have been stored on my laptop; that is, profiles, saved favorite nothing that I could find in user accounts and in the local app, low local and roaming data folders. What is strange, is that I can't set the local storage for flash either. When I visit the Adobe site to view the Adobe Flash Player Settings Manager I can move the scroll bar, but cannot check the: allow third-party flash content to store data on your computer. I can't do it on a Web site where the flash does not work. When I try and it changed on any site that it goes back to zero. Not sure if it is a part of the problem. I got tired of many suggestions on the pages of material here, but nothing works. I even tried this http://forums.adobe.com/message/4566499#4566499#4566499

  The other strange thing is that I used to get the "warning: script does not" prompt that displays "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. "sometimes when I would buy on Macy's.com. This is the only site that it happened.
  I know I have only little technical knowledge, but I have tried to figure this out for a few days and do not know what is happening. The only thing I can think is that I somewhere files corrupted causing this problem. I have just updated to Windows 8.1 tonight in the hope that can help, but nothing helped. I would be very disappointing if I couldn't use FF or must go back using Chrome and FF.
  Sorry for the posting long but no solution would be much appreciated.

  Hi jscher2000,.

  Yes, I followed essentially the: Manual steps: https://support.mozilla.org/en-US/questions/968190?page=5#answer-509209 you have posted.

  And after restarting Firefox, Flash worked. Thanks again for your post I could not find this solution on the Adobe forums until you have posted the link.
  Your expertise and your time is much appreciated.

• Satellite A300 does not work

  My laptop broke down. When I turn on the laptop I get a screen black ask me to select either Startup Repair (does not work) or start Windows normally (does not work).

  I am then presented with the System Recovery Options (Startup Repair, System Restore, restore pc windows completely, command prompt, windows memory diagnostic tool, toshiba Recovery Wizard). No matter which option to choose, nothing works. I tried the Recovery Wizard, but he advises that I will lose all data.

  I can't afford to lose all my data because it will mean I lose as itunes and I won't be able to deauthorise computer.

  I also have a lot of photos and other important information.

  I have no backup discs (they were not provided when I bought the laptop).

  Hoping someone can help as I really need retriend my all.

  Help!

  > I have no backup discs (they were not provided when I bought the laptop).
  The recovery disc are not provided, because you create the recovery disks using the preinstalled software called creator of Toshiba drive back (I guess this is mentioned in the user manual)

  But it is the same procedure of recovery provided by Toshiba Wizard of recovery you can find, press F8.
  Both procedures (HARD disk or recovery disk recovery) would format the HARD drive.

  I think you should start Notepad using the Live CD. You can use Linux Live CD WinPE or (BartPE).
  Google for it

  These CD would boot a Windows or Linux environment and will have access to the files on the HARD drive.
  Then you could safe files on external media and then you can install Windows using HARD drive recovery.

• WiFi does not work on Iphone5

  Since the upgrade to iOS 9.2, wifi doesn't connect. I rebooted, restored from a backup, no joy. The iPhone connects to iTunes (windows) OK. Should I restore the OS? TIA

  Yes, in order to exclude a software problem, set it to the factory settings, without using the last backup. Manually configure the personal info and test the Wi - Fi connection.

  If it works, use the backup to restore, if the problem returns, the backup was damaged.

  In the case where it still does not work, get the phone by Apple or an Apple authorized service provider:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Selection of default application does not not on z3c

  Hi my selection of default app does not work I upgraded my phone to 4.4 and still does not. I always use the bottom and it does not work. He always ask me the question pop out of what program I want to use.

  Have you tried settings-applications-all, reset app preferences? And after that, try again to select.

• The transfer does not work

  I horizontal mig easy transfer file and I keep getting a message to select a download file does not work.  I recently used the file and had to reformat the hard drive and reinstall vista now easy file transfer does not use these files again

  Hi pcanderson,

  To better understand the issue, we need the following information:

  (a) what is you receive the exact error message?

  (b) how exactly you try to run easy transfer?

  Please provide more details about the issue you are experiencing for understand us to better the issue and help you solve this problem.

  You might want to know

  The problems of file transfer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-transfer-problems

  Transferring files and settings: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• blutooth keyboard does not work with Samsung Slate.

  I'm not able to use my blutooth keyboard is more for my samsng slate xe 700.i lost the key number to pair the blutooth devices

  Hello

  1 have there recent changes made on the computer before the show?

  2. What is the number of brand and model of the Bluetooth keyboard, you're trying to pair with Samsung Slate?

  3. what happens when you try to connect the keyboard with Samsung Slate?

  4. If it works much earlier?

  I suggest you to please follow the steps mentioned below and check if it helps.

  Method 1: Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Connect to Bluetooth and other wireless or network devices.

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 3: Remove and reinstall the device.

  a. click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

  b. Select the device that does not work, then click on remove.

  c. click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), select the device is set up and ready to be found check box, and then click Next.

  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then click Next.

  Follow the remaining instructions in the wizard.

  • Make sure that the device is on and that the batteries should be replaced.

  ·         Check the status of service Bluetooth and make sure that it is started.

  • Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.
  • Make sure that you have installed the device using the appropriate program. If this isn't the case, reinstall the device.

  For a keyboard or a mouse, if you have installed the Bluetooth wireless technology on your computer, use the Add Bluetooth device Wizard. To do this, follow these steps:

  a. connect a wired keyboard or mouse to your computer.

  b. click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

  c. click Add.

  • The unit may be out of range of your computer, or too close. Try to move closer or a little further away from your computer.

  Hope this information helps you.

• With the clause does not work in SqlPlus for DataBase 11 GR 8 1 material

  I have 11 GR 1 database material, when I connect to my database through SqlPlus (version 8.0.6.0.0) this query

  with x as (select * from areas) select * from x;

  does not work. But when you use SqlPlus provided by 11g, this query works well. This query can run on an older version of SqlPlus?

  user12222356 wrote:
  This client software is installed with Oracle developer 6i form. should I remove all the form developer? Latest version of the form developer is available for 11 GR 1 matter?

  Well, you have problems with the developer of forms?

  I wouldn't recommend delete because you have problems with the SQL more customer that goes with it. I recommend to download the instant client and using them for your needs of sqlplus and leaving the rest products installed on your machine only.

• order by desc or ASC does not work with rownum

  SQL> desc offer
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   OFFER_ID                                  NOT NULL NUMBER(14)
   DOMAIN_ID                                          NUMBER(14)
   OFFERDATE                                          TIMESTAMP(0)
   CONTACTPERSON                                      VARCHAR2(36)
   EMAIL                                              VARCHAR2(50)
   TEL                                                VARCHAR2(23)
   CATEGORY                                           NUMBER(2)
   AMOUNT                                             NUMBER(5)
   STATUS                                             NUMBER(2)
  
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  select to_char(offerdate,'dd-Mon-yyyy'),
    2     offer_id,
    3     amount
    4  from
    5     offer
    6  where
    7     domain_id=1
    8     and amount is not null
    9* order by offerdate desc
  SQL> /
  
  TO_CHAR(OFF   OFFER_ID     AMOUNT
  ----------- ---------- ----------
  27-Apr-2010          4         55
  26-Apr-2010          5         45
  26-Apr-2010          3         50
  26-Apr-2010          2         45
  
  /*****These may be Ten thousand rows*****/

  When you add a'm rownum < 2 order by asc or desc in my query, then it does not work.
  

  SQL> ed
  Wrote file afiedt.buf
  
    1  select to_char(offerdate,'dd-Mon-yyyy'),
    2     offer_id,
    3     amount
    4  from
    5     offer
    6  where
    7     domain_id=1
    8     and amount is not null
    9  and
   10     rownum<2
   11* order by offerdate desc
  SQL> /
  
  TO_CHAR(OFF   OFFER_ID     AMOUNT
  ----------- ---------- ----------
  26-Apr-2010          5         45
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  select to_char(offerdate,'dd-Mon-yyyy'),
    2     offer_id,
    3     amount
    4  from
    5     offer
    6  where
    7     domain_id=1
    8     and amount is not null
    9  and
   10     rownum<2
   11* order by offerdate asc
  SQL> /
  
  TO_CHAR(OFF   OFFER_ID     AMOUNT
  ----------- ---------- ----------
  26-Apr-2010          5         45

  I just want to display a disc of DB offerDate wise
  
  Thank you in anticipation

  Try this

  select to_char(offerdate,'dd-Mon-yyyy'),
         offer_id,
         amount
      from(
      select to_char(offerdate,'dd-Mon-yyyy'),
         offer_id,
         amount
      from
  
         offer
      where
         domain_id=1
         and amount is not null
  
         order by offerdate asc)
  where  rownum<2
  

  Published by: user12984479 on April 27, 2010 04:34

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.